SanKen Posted October 14, 2022 Share #1026 Posted October 14, 2022 I have a question how to install ARPL on an internal disk? Disk eMMC 32GB So that I do not have to use a flash drive. linux and dd command? Quote Link to comment Share on other sites More sharing options...
kociubin Posted October 14, 2022 Share #1027 Posted October 14, 2022 18 hours ago, mcdull said: May I have a quick question? is this loader blocking quickconnect or transcoding service? I have a valid serial number and mac under vm but cannot get either to work. with the TinyCore RedPill Loader I have no such issue. Thanks. FWIW, I also have a real serial and mac. I'm able to use quickconnect just fine. My goal was to get email notifications working. I intially started out with an auto-generated serial number/mac. This was on a working system. I then changed the SN/MAC to a real one. But no matter what I tried notifications just wouldn't work. So I started over and recreated my NAS using a real SN/MAC, re-imported settings and only then notifications started to work. I'm running ProxMox so this was pretty easy to do. It might be worth a shot. I think you need a real SN/MAC configured in the loader when the DSM boots up for the first time. This was certainly needed in my case to get notifications working. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 14, 2022 Share #1028 Posted October 14, 2022 (edited) 2 hours ago, SanKen said: I have a question how to install ARPL on an internal disk? Disk eMMC 32GB So that I do not have to use a flash drive. linux and dd command? I just installed ARPL to an internal SSD with a simply usd- SSD connector cable, so my pc see it to an usb flash drive. I think, it' s an easiest way. Edited October 14, 2022 by Rick4 Quote Link to comment Share on other sites More sharing options...
SanKen Posted October 14, 2022 Share #1029 Posted October 14, 2022 Tell me how should I connect such a cable to the built-in eMMC NAND? Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 14, 2022 Share #1030 Posted October 14, 2022 1 minute ago, SanKen said: Tell me how should I connect such a cable to the built-in eMMC NAND? First you wrote, it's an internal. Now you write, it's an built- in. If you don't know, what kind type of your SSD have to, how can we help you? Quote Link to comment Share on other sites More sharing options...
vista1967 Posted October 14, 2022 Share #1031 Posted October 14, 2022 8 hours ago, TheEvilSide said: Hi Rick4. I have read all the pages of this thread, 41. Nothing is said about power schedule, wake on. I've read much of the redpill thread and haven't seen anyone mention this. I have also read on github and neither. Before posting to ask for help I have spent a lot of time reading and I have not found any information about it. Regards 1 Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 15, 2022 Share #1032 Posted October 15, 2022 16 hours ago, vista1967 said: Thank you, but unfortunately in my case =Asrock J1900B-ITX and DS3617xs operation NOT ok. I tried it with default bios settings, and tried with switched off all unnescessary options. No luck, real local time synced with dsm time but dsm set bios time 2 hours earlier again and again. Quote Link to comment Share on other sites More sharing options...
lustigerpeter Posted October 15, 2022 Share #1033 Posted October 15, 2022 DSM faulty Error 13 System: DS31615xs OS: DSM 6.1.7-15284 Update3 works without problems Hardware: Fujitsu Futro S740 mini PC Intel J4105 1.50GHz 8GB 16GB SSD Should only run as a reverse proxy and Let's Encrypt certificate management. Update of ARRPL and modules Bootstick created for ds3615xs ( 42218 ) Device starts up finds.synology.com finds device Installation ( DSM_DS3615xs_42218.pat ) Manually not possible Automatic installation not possible. Error 13 ! Also trying with 920+ because of CPU same problem error 13 VID and PID are OK MAC is OK IP is ok Model name is ok However, DSM 6.1.7-15284 Update 3 works fine Does the DSM install itself after the Boor process, since it is downloaded beforehand? Translated with Google If there is a user from Germany, please reply in German or write a PM Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 15, 2022 Share #1034 Posted October 15, 2022 (edited) 7 hours ago, Rick4 said: Thank you, but unfortunately in my case =Asrock J1900B-ITX and DS3617xs operation NOT ok. I tried it with default bios settings, and tried with switched off all unnescessary options. No luck, real local time synced with dsm time but dsm set bios time 2 hours earlier again and again. Today i just tried with a special industrial Kontron KTQM87-itx mobo, doesn't want to boot in a set time after is shut down it, dsm set bios time to a -hours time zone again and again, 3617xs files, another all ok. Edited October 15, 2022 by Rick4 Quote Link to comment Share on other sites More sharing options...
lustigerpeter Posted October 15, 2022 Share #1035 Posted October 15, 2022 ds3617xs starts but I cannot create a storage pool No size is assumed and I'm only offered 4GB although 14GB are available. 16GB m.2 sata ssd on board ( only for Reverse Proxy and Let´s Encrypt ) Quote Link to comment Share on other sites More sharing options...
lustigerpeter Posted October 15, 2022 Share #1036 Posted October 15, 2022 The same problem with 920+ Installation ok Cannot create storage pool SSD is recognized Quote Link to comment Share on other sites More sharing options...
mcdull Posted October 15, 2022 Share #1037 Posted October 15, 2022 On 10/14/2022 at 9:56 PM, kociubin said: FWIW, I also have a real serial and mac. I'm able to use quickconnect just fine. My goal was to get email notifications working. I intially started out with an auto-generated serial number/mac. This was on a working system. I then changed the SN/MAC to a real one. But no matter what I tried notifications just wouldn't work. So I started over and recreated my NAS using a real SN/MAC, re-imported settings and only then notifications started to work. I'm running ProxMox so this was pretty easy to do. It might be worth a shot. I think you need a real SN/MAC configured in the loader when the DSM boots up for the first time. This was certainly needed in my case to get notifications working. Thanks for your information, but I have the same mac and sn when mirgating from a working DSM 7 of TinyCore RedPill Loader. I am also using Proxmox as well, should I start up another vm and put back all hdd? Quote Link to comment Share on other sites More sharing options...
lustigerpeter Posted October 16, 2022 Share #1038 Posted October 16, 2022 10 hours ago, lustigerpeter said: Das gleiche Problem mit 920+ Installation ok Speicherpool-SSD kann nicht erstellt werden, wird erkannt 920+ works now. I did a migration from 3615xs to 920+ but with the option "keep all data". The latest DMS can be installed automatically. It doesn't work with a blank disk. Thanks for the tool Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 16, 2022 Share #1039 Posted October 16, 2022 18 hours ago, Rick4 said: Today i just tried with a special industrial Kontron KTQM87-itx mobo, doesn't want to boot in a set time after is shut down it, dsm set bios time to a -hours time zone again and again, 3617xs files, another all ok. Today i just tried with an Asrock H110M-ITX mobo with an i7-6700 CPU, everything's works, but 3617XS image set bios time 2 hours earlier again after it booted. Quote Link to comment Share on other sites More sharing options...
CeeBs Posted October 16, 2022 Share #1040 Posted October 16, 2022 Hi, Just wanted to say thanks for this brilliant Automated loader. I have no Linux skills so was unsure of how to use TCRP but with your loader it was a breeze. My system is a Terramaster F5-221 which was running 6.2 based on a DS918+ from using Jun's loader, it probably didn't need an update but I kept getting prompts from Synology so I thought it was time but saw the process as daunting. Anyway I found your automated loader and gave it a go and hey presto! from the automation I am now on a DS920+ running DSM 7.1.1. So Thanks again! CeeBs 1 Quote Link to comment Share on other sites More sharing options...
ngucy5767 Posted October 17, 2022 Share #1041 Posted October 17, 2022 (edited) Sry guys, may i ask the arpl 0.4 alpha8 can use dsm 7.1.1-42962 update 1? Edited October 17, 2022 by ngucy5767 Quote Link to comment Share on other sites More sharing options...
Rasmus86 Posted October 17, 2022 Share #1042 Posted October 17, 2022 On 10/8/2022 at 12:11 PM, Rasmus86 said: Outcome of the update: SUCCESSFUL - DSM version prior update: DS918+ DSM 6.2 JUN loader -> DSM 7.1.1-42962 Update 1 - Loader version and model: Automated Redpill Loader 0.5 alpha 1, DS918+ - Using custom extra.lzma: NA - Installation type: Baremetal (Gigabyte GA-H97N-WIFI – i3-4170) - Additional comments: HW Transcoding in Plex works + Docker (Haugene) works Update on this - almost everything still works. Except for shutdown - I can make it shutdown, but it turns back on after a few minutes. Have gone over the forum and can see that people with Proxmox etc. have had this issue, but I don't use Proxmox. The only way to shut down the NAS is to push the power button until it turns off. Can anyone point me in the direction of af forum post with a fix? In the log it says: 2022-10-17 10:49:38 - SYSTEM - System started to boot up 2022-10-17 10:46:54 - admin - System started counting down to shutdown Quote Link to comment Share on other sites More sharing options...
Rasmus86 Posted October 17, 2022 Share #1043 Posted October 17, 2022 Ahh searched a bit more and found something. So will try this first. Disregard the above post. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 17, 2022 Share #1044 Posted October 17, 2022 5 hours ago, ngucy5767 said: Sry guys, may i ask the arpl 0.4 alpha8 can use dsm 7.1.1-42962 update 1? Simply update loader, modules, etc. from grub's update menu. 1 Quote Link to comment Share on other sites More sharing options...
mcdull Posted October 17, 2022 Share #1045 Posted October 17, 2022 Interestingly my working SN / MAC in tinycore redpill loader is being reported invalid under automated loader. How does it verify serial number? Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 17, 2022 Share #1046 Posted October 17, 2022 1 hour ago, mcdull said: Interestingly my working SN / MAC in tinycore redpill loader is being reported invalid under automated loader. How does it verify serial number? You generated that within ARPL, or use it before somewhere? Quote Link to comment Share on other sites More sharing options...
mcdull Posted October 17, 2022 Share #1047 Posted October 17, 2022 9 minutes ago, Rick4 said: You generated that within ARPL, or use it before somewhere? I used it with tinycore loader for a long time. And both QC and Transcoding work. Now I messed up the DSM, and now force reinstalled and lost all settings. But still the serial number was report wrong and in DSM I cannot sign in my synology account. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 17, 2022 Share #1048 Posted October 17, 2022 (edited) 3 minutes ago, mcdull said: I used it with tinycore loader for a long time. And both QC and Transcoding work. Now I messed up the DSM, and now force reinstalled and lost all settings. But still the serial number was report wrong and in DSM I cannot sign in my synology account. Can you used that serial with same latest dsm, or older only? Edited October 17, 2022 by Rick4 Quote Link to comment Share on other sites More sharing options...
mcdull Posted October 17, 2022 Share #1049 Posted October 17, 2022 1 minute ago, Rick4 said: Can you used that serial with same latesd dsm, or older only? if I have a working config with latest dsm, why should I bother to do it again? I just tried update my version togehter with the loader. It was good with my 2nd latest DSM version. Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted October 17, 2022 Share #1050 Posted October 17, 2022 1 hour ago, mcdull said: I used it with tinycore loader for a long time. And both QC and Transcoding work. Now I messed up the DSM, and now force reinstalled and lost all settings. But still the serial number was report wrong and in DSM I cannot sign in my synology account. I have a valid SN for DS3622xs+ too which is offically working within the synology account but ARPL is complaining that this SN is invalid too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.