SanKen

you must choose model broadwellnk is to ds3622xs+

4 is only for DS923+ New!

How to run RedPill in tinycore mode to rebuild the loader? Only grubmenu.sh ?

I changed rploader.sh a bit and it seems to work, but now I have a problem with friend tcrp. is in loop. it finds a new version and reboots all the time. As if he didn't know where to save the update. It does not know the disk path. Windows runs normally on this drive and the loader should. INTEL NUC NUC6CAYS

@Peter Suh could you see this post? There may be a quick fix to the problem.

I have a question, I wanted to upload tcrp to the internal emmc using command dd if=tinycore-redpill-uefi.v0.9.2.9.img of=/dev/mmcblk0 bs=1M and unfortunately it doesn't work for me booted from tcrp disk but can't build the loader image [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] umount: /dev/mmc1: no mount point specified. umount: /dev/mmc2: no mount point specified. mount: /home/tc/redpill-load/localdiskp1: special device /dev/mmc1 does not exist. Mounting /dev/mmc1 to localdiskp1 mount: /home/tc/redpill-load/localdiskp2: special device /dev/mmc2 does not exist. /dev/mmc2 localdiskp2 ERROR: Failed to mount correctly all required partitions Entries in Localdisk bootloader : ======================================================================= grep: localdiskp1/boot/grub/grub.cfg: No such file or directory sha256sum: /home/tc/redpill-load/localdiskp2/zImage: No such file or directory sha256sum: /home/tc/redpill-load/localdiskp2/rd.gz: No such file or directory grep: /home/tc/redpill-load/localdiskp1/boot/grub/grub.cfg: No such file or directory grep: /home/tc/redpill-load/localdiskp1/boot/grub/grub.cfg: No such file or directory Updated user_config with USB Command Line : Updated user_config with SATA Command Line : cp: cannot stat 'localdiskp1/zImage': No such file or directory Ramdisk in not compressed cat: /home/tc/redpill-load/localdiskp1/rd.gz: No such file or directory cpio: premature end of archive cat: /home/tc/redpill-load/localdiskp1/custom.gz: No such file or directory cpio: premature end of archive chmod: cannot access '/home/tc/rd.temp/usr/sbin/modprobe': No such file or directory 1 block Setting default boot entry to TCRP Friend sed: can't read localdiskp1/boot/grub/grub.cfg: No such file or directory umount: localdiskp1: not mounted. umount: localdiskp2: not mounted. Cleaning up files Caching files for future use ./rploader.sh: line 2797: [: -le: unary operator expected Found /home/tc/redpill-load/cache/ds920p_42962.pat, copying to cache directory : /mnt/mmc3/auxfiles Saving user session for future use. Saving current extensions -> OK ! Saving current user_config.json -> OK ! tc@box:~$ lsblk mmcblk0 179:0 0 29.1G 0 disk |-mmcblk0p1 179:1 0 48M 0 part |-mmcblk0p2 179:2 0 75M 0 part `-mmcblk0p3 179:3 0 900M 0 part /mnt/mmcblk0p3 mmcblk0boot0 179:8 0 4M 1 disk mmcblk0boot1 179:16 0 4M 1 disk

You don't need add anything to work properly. You must restart DSM. It is added in modules by default. Module name: acpi

I have updated 0.5alpha to version 1.0beta2. After booting, I got Recovery ... but this is not Recovery loop. I clicked Recovery and DSM started up properly. I have a question. I have built-in eMMC 32GB memory in Intel NUC. How to use it for ARPL. i was thinking about using dd from linux.

Anyone of you also have a problem with high loadavg? CPU usage 70-80% but load is Load: 6.48 5.19 2.78 The performance of the synology system itself is bad. Doesn't go to install normally virtual machine. It goes on forever.

Tell me how should I connect such a cable to the built-in eMMC NAND?

I have a question how to install ARPL on an internal disk? Disk eMMC 32GB So that I do not have to use a flash drive. linux and dd command?

@fbelavenuto During the installation it is possible to enter your own SN. but it is not possible to enter your own MAC address. Would it be very difficult to add such an option?

@fbelavenuto Thank you, the update works. I still have a question, how to update arpl? How to run it in arpl http mode?

How to upgrade? Only upload to DSM?

How to install addons? https://github.com/fbelavenuto/arpl-modules/blob/main/geminilake-4.4.180/button.ko This is probatly working on PWRButtom.