CtrlAltDel Posted October 11, 2016 Share #426 Posted October 11, 2016 (edited) anyone got wake on lan working? I enabled it in the bios and in synology, but no success. Should the original mac address work? GEN 8 Baremetal Also see this post for installation details > viewtopic.php?f=2&t=20216&p=74296#p74295 WOL I finally got WOL working you just need to use the old method of placing the shutdown file in the rc.d folder and making it executable. The folder has moved from "root/usr/syno/etc/rc.d" to "Root/usr/local/etc/rc.d". Thanks Tigs > viewtopic.php?f=2&t=20216&start=410#p74476 Synology assistant WOL brings the server back to life as well as other 3rd party tools. Make sure you use the MAC in your grub config file. Hello someone got the WOL working?The old method (http://xpenology.me/how-to-activate-wol/) is not to work anymore, there is no longer rc.d See above. Root password reset after DSM 6 migration note this also applies to fresh installs. The issue I was having resetting the root password seems to be due to the fact that my pw included special characters? Once I used alphabetic and numeric characters the password set and now I can get root access with WinSCP. Source: https://forum.synology.com/enu/viewtopi ... 75#p424956 muelleh wrote: Even if I don't know why so many users will ssh or scp with the root account, here is how to enable that. Synology simply has not set a password for account root (actually the locked it out using a "*" for password hash). Here is how to enable the root access for ssh/scp: 1. Login using putty or any other ssh client with administrator account (usually "admin") 2. You will be asked for a password. Enter the one for the administrator account 3. You will get a command prompt 4. Enter: sudo su - 5. You will be asked for a password. Enter again the one for the administrator account 6. You will get a command prompt root@... 7. Enter command: synouser --setpw root your_new_root_password For "your_new_root_password" please use the desired password for root account. Now you can login using "ssh root@your_diskstation" as usual (of course this work for scp also). No more hassle with sudo... Power Save The power save seems to work OK without the need to upload files etc. and it's set for "power save" mode by default. My Gen8 G1610T is running @ 1600Mhz on average. Update: I think I made a mistake on the governor state mentioned above so I went for plan b... I uploaded the old S99PowersavingINTEL.sh script to root/user/local/etc/rc.d/ and setup the crone job and the power cpu frequency is changing as expected. Other users have been reporting correct functionality without making any changes to the default installation. Power Button I haven't managed to get the power button fix working so far. Update: The power button fix is usable again see this post by Arcao here > viewtopic.php?f=2&p=75406#p75404 . Update: SHR and BTRFS SHR with Btrfs works for migrated DSM5.X systems and I can confirm that it also works on fresh baremetal builds using Jun's pro tip provided below under SHR support. If you migrate your system you need to remove the volume/s and then recreate it/them using btrfs in order to switch from the ext4 file system. Make sure you backup your data, packages are an issue, synced folders need special attention and encrypted folders/files also require special attention, once you start moving things about! Make sure you cover your bases and if in doubt don't risk your data. For fresh builds you simply select btrfs rather than ext4 when you create your volume/s. First impressions The served has been on DSM 6 for the past 5 days with a few reboots here and there setting up WOL and trying to get the PowerButton working. Moved some large ish chunks of data around, local joomla dev sites are working (public access not tested). SSH/SCP with root access working. Video station is working as expected. Very happy with first impressions. Also see this post for installation details > viewtopic.php?f=2&t=20216&p=74296#p74295 Edit: Useful tips from this thread: SHR support: Important! Make sure you edit the synoinfo.conf in the etc.defaults folder. See this post by Jun > viewtopic.php?f=2&t=20216&start=440#p74525 For SHR support just edit /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" press F5 on you web browser Using SataPortMap= See post by Setsunakawa > viewtopic.php?f=2&t=20216&start=430#p74497 SataPortMap=4 means first 4 ports of 1st controler. SataPortMap=44 means first 4 ports of 1st controler and first 4 ports of 2nd controler. SataPortMap=422 means first 4 ports of 1st controler, first 2 ports of 2nd controler and first 2 ports of 3rd controle Improper Shutdown (no console issue) See post by meimeiriver here > viewtopic.php?f=2&t=20216&start=620#p75437 "(...) changed the console output on the following service only ... /usr/share/init/syno_poweroff_task.conf:console output ... from "console output" to "console none". After reboot the error of "improper shutdown" is gone." Other useful posts Polanskiman's Installation Guide from page 33: > viewtopic.php?f=2&t=20216&p=74296#p74295 Edited October 26, 2016 by Guest 1 Quote Link to comment Share on other sites More sharing options...
dark-age Posted October 11, 2016 Share #427 Posted October 11, 2016 The problem is not the NIC as broadcom and realtek are present. I think it's because Gen7 have AMD cpu but vanilla kernel is build only for Intel :/To make it to work, I (or someone else) need to rebuild full kernel & modules but... i will be busy for next days I understand now I'll be lurking in the shadows thank you setsunakawa Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted October 11, 2016 Share #428 Posted October 11, 2016 I have tried all loader and its not working Maybe the error is happening because i have inside all Sata cables on the motherboard for all 6 hdds but there are only 4 hdds 1+2 5+6 and the error says always on Sata 3+4 there is en error on the Hdds and the sataport 3+4 will be disabled. I have tried sata = 6 or 4 Please note with 5967.1 all is working perfectly no have any issues. Any tips ? the Motherboard its a h87 s plus https://www.asus.com/Motherboards/H87PLUS/ thank you Quote Link to comment Share on other sites More sharing options...
setsunakawa Posted October 11, 2016 Share #429 Posted October 11, 2016 @nemesis122 : put disks on port 1,2,3,4 and put SataPortMap=4 in grub.cfg SataPortMap=4 means first 4 ports of 1st controler. SataPortMap=44 means first 4 ports of 1st controler and first 4 ports of 2nd controler. SataPortMap=422 means first 4 ports of 1st controler, first 2 ports of 2nd controler and first 2 ports of 3rd controler. Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted October 11, 2016 Share #430 Posted October 11, 2016 so in this case 42 will work i will try thank you!! when is not working i will set the correct sata 1234. Quote Link to comment Share on other sites More sharing options...
Aigor Posted October 11, 2016 Share #431 Posted October 11, 2016 First test with config.ko it's ok compiled by myself it works @setsunakawa did you saw several warning during compilation? Quote Link to comment Share on other sites More sharing options...
davurleon Posted October 11, 2016 Share #432 Posted October 11, 2016 Please, is there any way to make a loader that uses a version that supports SHR natively? Maybe DS1815+ or something like that? I am absolutely willing to test/work on to help, but I am no big linux-whiz I'm afraid... Quote Link to comment Share on other sites More sharing options...
setsunakawa Posted October 11, 2016 Share #433 Posted October 11, 2016 @Aigor : Yes i've got some warning but after enabling storage drivers, you will get errors and you will have to patch them. After pathing them, modules will build but lot's of them will not work... I can make a diff patch if you want ? Quote Link to comment Share on other sites More sharing options...
Aigor Posted October 11, 2016 Share #434 Posted October 11, 2016 @Aigor : Yes i've got some warning but after enabling storage drivers, you will get error and you will have to patch them.After pathing them, modules will build but lot's of them will not work... I can make a diff patch if you want ? In the name of hacking, thank you I have added drivers/tty/vt/vt.c with old one comes from xpenology kernel to see if we can have a console not only in serial mode, i'm compiling Quote Link to comment Share on other sites More sharing options...
boosterbosch Posted October 11, 2016 Share #435 Posted October 11, 2016 Power Button I haven't managed to get the power button fix working so far. First impressions The served has been on DSM 6 for the past 5 days with a few reboots here and there setting up WOL and trying to get the PowerButton working. Moved some large ish chunks of data around, local joomla dev sites are working (public access not tested). SSH/SCP with root access working. Video station is working as expected. Very happy with first impressions. what problem have you got with your power button? I have issues trying to create a new hyperbackup to webdav or creating a lets encrypt certificate, when I try doing these on the gen 8 I get the following error: The operation failed. Please login to DSM again and retry. restarted dsm already but no differnce Quote Link to comment Share on other sites More sharing options...
Aigor Posted October 11, 2016 Share #436 Posted October 11, 2016 No lucky my own kernel doesn't boot and i don't know why. My passes installing compiler and ad alias to point it extract config.gz via configs.ko added option in menuconfdig to add vga console compiled copied to usb stick modified grub entry to point to new zImage . Quote Link to comment Share on other sites More sharing options...
CtrlAltDel Posted October 11, 2016 Share #437 Posted October 11, 2016 Power Button I haven't managed to get the power button fix working so far. First impressions The served has been on DSM 6 for the past 5 days with a few reboots here and there setting up WOL and trying to get the PowerButton working. Moved some large ish chunks of data around, local joomla dev sites are working (public access not tested). SSH/SCP with root access working. Video station is working as expected. Very happy with first impressions. what problem have you got with your power button? I was trying to sort out the Power Down Button fix so the server can enter a controlled shutdown by short pressing the physical power button. I have issues trying to create a new hyperbackup to webdav or creating a lets encrypt certificate, when I try doing these on the gen 8 I get the following error: The operation failed. Please login to DSM again and retry. restarted dsm already but no differnce I haven't got that far yet. VPN and Lets Encrypt are on the todo list. Sorry I can't be of any help. Quote Link to comment Share on other sites More sharing options...
meimeiriver Posted October 11, 2016 Share #438 Posted October 11, 2016 For those of you still using ESXi 6 u2 (so many bare metal users of late), I was able to upgrade flawlessly (from oktisme's image), all the way to DSM 6.0.2-8451 Update 2, without any problem. The install consisted of a (very rapid) migration of my old disks, and editing /usr/share/init/syno_poweroff_task.conf, to avoid the 'improper shutdown' issue. Everything seems to work. Hard disk temperature status can be read properly, and all S.M.A.R.T. info. And it boots up real fast! Perfect version! And many thanks to the OP for making this! Quote Link to comment Share on other sites More sharing options...
Rusty Posted October 11, 2016 Share #439 Posted October 11, 2016 Got my Gen8 upgraded. Seems there is now a built in apps group which ruined my custom one so some packages wouldn't run without some changes. It causes a bit of odd behaviour in that after a short period of running iLO will crash and the fans will ramp up. This is only temporary as it recovers after a while. Quote Link to comment Share on other sites More sharing options...
jun Posted October 12, 2016 Author Share #440 Posted October 12, 2016 Not to be the party pooper here but I think that providing modified loaders from Jun's OP only serves to confuse people and also derails the efforts made so far. I know some are invested into helping others by adding additional drivers and compatibility options but I think it just makes this thread heavier and heavier to follow. I would recommend perhaps those who have the ability to compile code to do it in cooperation with Jun and then post as one. This would have the advantage of greatly improving readability and also making sure there is only one source of the loader. Maybe making a new thread with a proper loader name and versioning system would help. One person would be in charge of updating the OP when required. @jun @setsunakawa @quicknick @sweebee Please consider this. I think something like wiki works best for this kind of work-in-progress community efforts. The essential part is already there, and I will rely on the community for further improvement. Quote Link to comment Share on other sites More sharing options...
jun Posted October 12, 2016 Author Share #441 Posted October 12, 2016 Please, is there any way to make a loader that uses a version that supports SHR natively?Maybe DS1815+ or something like that? I am absolutely willing to test/work on to help, but I am no big linux-whiz I'm afraid... You dont need a DS1815+ for SHR support just edit /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" press F5 on you web browser Quote Link to comment Share on other sites More sharing options...
Benoire Posted October 12, 2016 Share #442 Posted October 12, 2016 Oh ok, so we could create a boot loader for a SAS rackmount, edit the config to do the above and that would work? Quote Link to comment Share on other sites More sharing options...
UNSC-117 Posted October 12, 2016 Share #443 Posted October 12, 2016 Need driver for: 3Ware 9690SA-8I 512MB SAS SATA PCIe x8 RAID Controller Can any one load or point me on how to load them into the .img The latest XPEnoboot dsm 5.XX .img had the drivers already. Thank you Quote Link to comment Share on other sites More sharing options...
yulu Posted October 12, 2016 Share #444 Posted October 12, 2016 For those of you still using ESXi 6 u2 (so many bare metal users of late), I was able to upgrade flawlessly (from oktisme's image), all the way to DSM 6.0.2-8451 Update 2, without any problem. The install consisted of a (very rapid) migration of my old disks, and editing /usr/share/init/syno_poweroff_task.conf, to avoid the 'improper shutdown' issue. Everything seems to work. Hard disk temperature status can be read properly, and all S.M.A.R.T. info. And it boots up real fast! Perfect version! And many thanks to the OP for making this! How do you get S.M.A.R.T. working in Esxi6 u2 It show not available in my dsm Quote Link to comment Share on other sites More sharing options...
tigs Posted October 12, 2016 Share #445 Posted October 12, 2016 Hi there, How to tell whether WOL is working or not? Thanks WOL I finally got WOL working you just need to use the old method of placing the shutdown file in the rc.d folder and making it executable. The folder has moved from "root/usr/syno/etc-defaults/rc.d" to "Root/usr/local/etc/rc.d". Thanks Tigs > viewtopic.php?f=2&t=20216&start=410#p74476 Synology assistant WOL brings the server back to life. Quote Link to comment Share on other sites More sharing options...
meimeiriver Posted October 12, 2016 Share #446 Posted October 12, 2016 For those of you still using ESXi 6 u2 (so many bare metal users of late), I was able to upgrade flawlessly (from oktisme's image), all the way to DSM 6.0.2-8451 Update 2, without any problem. The install consisted of a (very rapid) migration of my old disks, and editing /usr/share/init/syno_poweroff_task.conf, to avoid the 'improper shutdown' issue. Everything seems to work. Hard disk temperature status can be read properly, and all S.M.A.R.T. info. And it boots up real fast! Perfect version! And many thanks to the OP for making this! How do you get S.M.A.R.T. working in Esxi6 u2 It show not available in my dsm Nothing special, reallly. I'm using my old ICH10 controller, in pass-thru; and whereas the S.M.A.R.T info didn't work for in in oktisme's patch, with this one it simply does: https://1drv.ms/i/s!AhSxhQ9g_mrMhzVrZl2lD3LfIXFr Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 12, 2016 Share #447 Posted October 12, 2016 (edited) Hi there,How to tell whether WOL is working or not? Thanks Simple. Turn off your NAS. Then try a WOL see if it starts up If you don't know what it means then you probably don't have a use for it. Personally I did not have to fiddle with anything to have WOL working. I simply used the real MAC addresses of my 2 NICS and generated the serial with the famous excel serial generating file. WOL works as expected. Edited October 12, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
tigs Posted October 12, 2016 Share #448 Posted October 12, 2016 Hi there,How to tell whether WOL is working or not? Thanks Simple. Turn off your NAS. Then try a WOL see if it starts up If you don't know what it means then you probably don't have a use for it. Thanks! Lol Quote Link to comment Share on other sites More sharing options...
davurleon Posted October 12, 2016 Share #449 Posted October 12, 2016 Please, is there any way to make a loader that uses a version that supports SHR natively?Maybe DS1815+ or something like that? I am absolutely willing to test/work on to help, but I am no big linux-whiz I'm afraid... You dont need a DS1815+ for SHR support just edit /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" press F5 on you web browser Thanks so much, saved my day Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 12, 2016 Share #450 Posted October 12, 2016 (edited) Anyone experiencing kernel panic after enable jumbo frame (MTU 9000) for network interface? I don't know if it's a kernel panic but I just tried increasing mtu to 9000 and now the NAS wont reboot. At least DSM doesn't seem to boot but I can still ping the NAS. I can't ssh it though as the connection is refused. Any way to solve this other than reinstalling? edit: strangely I can also VPN in it so that means that DSM is actually loaded. I can't ssh though. edit 2: I can't even reinstall as Synology Assistant or find.synology.com do not see the NAS on the network. edit 3: I am also able to access my plex server. Still no luck in accessing dsm itself or ssh. Edited October 12, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.