setsunakawa
-
Posts
30 -
Joined
-
Last visited
Everything posted by setsunakawa
-
@Aigor : Yes i've got some warning but after enabling storage drivers, you will get errors and you will have to patch them. After pathing them, modules will build but lot's of them will not work... I can make a diff patch if you want ?
-
@nemesis122 : put disks on port 1,2,3,4 and put SataPortMap=4 in grub.cfg SataPortMap=4 means first 4 ports of 1st controler. SataPortMap=44 means first 4 ports of 1st controler and first 4 ports of 2nd controler. SataPortMap=422 means first 4 ports of 1st controler, first 2 ports of 2nd controler and first 2 ports of 3rd controler.
-
The problem is not the NIC as broadcom and realtek are present. I think it's because Gen7 have AMD cpu but vanilla kernel is build only for Intel :/ To make it to work, I (or someone else) need to rebuild full kernel & modules but... i will be busy for next days
-
I've posted the source on this post viewtopic.php?f=2&t=20216&p=74348#p74348 I use gcc from branch 7393 and kernel from branch 7274. But beware, some modules need to be patched to work in a non syno box (like lsi sas). You can find developper.pdf to help you to build modules or kernel. ramdisk.lzma is rd.gz from .pat file. (you can make your own from pat or reuse jun one or mine) use unlzma to uncompress, and cpio to extract. Make change, again use cpio tu make a new container and lzma to compress it. Hybrid EFI/BIOS is made from grub-install from ubuntu installed in EFI mode.
-
No DVB drivers included
-
XPE5 would be fine
-
Can you provide a full lsmod / dmesg / lspci on pastebin from a working linux ? As the cpu is an AMD and no Syno have amd cpus, I think lot's of drivers are missing :/
-
Yes, I merged OP ramdisk inside mine
-
i've added tg3 and mlx4 drivers with last jun's version : https://mega.nz/#!J1UG1SxY!lkZ67BHhbr8b ... p9FgpqMs44 It's still hybrid efi & bios . Sorry for the size, I forgot to cleanup FAT32...
-
ash-4.3# lsmod | grep mlx mlx4_en 95156 0 mlx4_core 241699 1 mlx4_en mlx_compat 5500 2 mlx4_en,mlx4_core compat 4337 3 mlx_compat,mlx4_en,mlx4_core ash-4.3# lsmod | grep tg3 tg3 149448 0 libphy 18069 1 tg3 ash-4.3# I make a .img and I post it
-
kernel sources uploaded : http://setsunakawa.ddns.net/synology/dsm6/ Edit: quicknick was faster
-
I'm uploading synology branch7274 that quicknick gave me Edit: I think it would be good if we make a versionned repo to patch next versions
-
chipnick gave me sources of 7274 some months ago, I had successfully made a kernel for my hardware (intel cpu, realtek nic, pch sata) but install always failled at 56% and after lot's of days & nights, I gave up. Jun succeeded where I failed with his module
-
Yes, I will make a new version with jun's latest changes . I will try a ramdisk with mellanox and broadcom, but with no warranty as I don't have hardware to test them.
-
Can you boot a linux (ubuntu for ex) and give me the name of the module used by your network card ? I will build it .
-
I've tried to make a new uefi/bios image, but with your new ramdisk, network does not work in my machine (r8169).
-
You will have nothing more than Booting the kernel. DSM output to serial port, not on screen. Go do find.synology.com. If it find it, good. If not, your network card is not supported for the moment.
-
Yes, you will have a login prompt at the end I try to find why it does not like when all sata are not filled
-
@substorm The image i've posted (for UEFI/BIOS) already have 2 partitions (on an official synoboot, the first partition contain recovery kernel/rd and the second the running kernel/rd from last update). You can use W32DiskImager, it will create both partitions I followed the string "We've detected errors on the hard drives ({0}), and the SATA ports have also been disabled. Please shut down your {1} to replace or remove the hard drives and try again." and the error is triggered from /usr/syno/bin/synodiskport -portthawlist Someone with serial and sata error can you put the output of this command ? If sata works for you, it would be fine to put the output too .
-
Nice catch, but sadly... my test board have only one sata port (but the chipset has two) Something to find about drive detection
-
I've made an Hybrid UEFI/BIOS baremetal image : https://mega.nz/#!88dhAYCL!V_RviNsst7qi ... GOz6P8GnZ0
-
Same here, I also have "We've detected errors on your hard drives (2) and the SATA ports have also been disabled. Please shut down or repace or remove the hard disks to continue." It's a bare metal UEFI/E3815 board with wiped disks (smart ok). Any idea ?
-
Hello, Justement, pour ceux qui ont un UEFI il faut booter xpenology en mode legacy (emulation bios classique). Aucun soucis pour toi, au contraire . De rien
-
Rien ne bouge car synology se refuse a communiquer les sources de DSM, ne respectant pas la licence GPL. La team Xpenology ne peut donc rien faire à part attendre que Synology daigne fournir les sources.
-
We can try on social networks : https://twitter.com/jtherincom/status/7 ... 9787865088