irishj Posted June 2, 2023 Share #251 Posted June 2, 2023 2 hours ago, dj_nsk said: Use it for your health! There, in comparison with the original file, only the code 0x3E92 (i5-8600) was replaced with 0x3E98 (9900K) and the digital signature was removed at the end. i915.DS918.64561.3E98.ko 2.06 MB · 3 downloads i915.DS920.64561.3E98.ko 2.05 MB · 3 downloads Worked perfectly, thanks a lot mate 1 Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 3, 2023 Share #252 Posted June 3, 2023 [i915.ko patched for i9-9900K DS920+ 7.2-64561 under ESXi8] - for today: FIXED 22 часа назад, dj_nsk сказал: The next step will be an attempt to change the model to DS918+ with the ARPL-i18n loader (I hope that all addons and modules will be overwritten). 1) New VM DS918+ with EFI Option with patched i915.ko /dev/dri disappears after I connect the disks. FAIL 2) New VM DS918+ with BIOS Option: /dev/dri exists with patched i915.ko and the old disks. SUCCESS 3) New VM DS920+ with BIOS Option: /dev/dri exists with patched i915.ko and the old disks. SUCCESS Спойлер -+-[0001:01]---00.0 Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] \-[0000:00]-+-00.0 Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] +-01.0-[01]-- +-07.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] +-07.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] +-07.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] +-07.7 VMware Virtual Machine Communication Interface [15ad:0740] +-0f.0 VMware SVGA II Adapter [15ad:0405] +-11.0-[02]--+-00.0 VMware USB1.1 UHCI Controller [15ad:0774] | +-01.0 VMware USB2 EHCI Controller [15ad:0770] | \-02.0 VMware SATA AHCI controller [15ad:07e0] +-15.0-[03]----00.0 Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e98] +-15.1-[04]-- +-15.2-[05]-- +-15.3-[06]-- +-15.4-[07]-- +-15.5-[08]-- +-15.6-[09]-- +-15.7-[0a]-- +-16.0-[0b]----00.0 Intel Corporation Cannon Lake PCH SATA AHCI Controller [8086:a352] +-16.1-[0c]-- +-16.2-[0d]-- +-16.3-[0e]-- +-16.4-[0f]-- +-16.5-[10]-- +-16.6-[11]-- +-16.7-[12]-- +-17.0-[13]----00.0 VMware VMXNET3 Ethernet Controller [15ad:07b0] +-17.1-[14]-- +-17.2-[15]-- +-17.3-[16]-- +-17.4-[17]-- +-17.5-[18]-- +-17.6-[19]-- +-17.7-[1a]-- +-18.0-[1b]----00.0 VMware NVMe SSD Controller [15ad:07f0] +-18.1-[1c]-- +-18.2-[1d]-- +-18.3-[1e]-- +-18.4-[1f]-- +-18.5-[20]-- +-18.6-[21]-- \-18.7-[22]-- Conclusion: it is necessary to use VM in ESXi in BIOS mode only. 1 1 Quote Link to comment Share on other sites More sharing options...
MrGarak Posted June 5, 2023 Share #253 Posted June 5, 2023 (edited) On 6/2/2023 at 10:53 AM, dj_nsk said: Use it for your health! There, in comparison with the original file, only the code 0x3E92 (i5-8600) was replaced with 0x3E98 (9900K) and the digital signature was removed at the end. i915.DS918.64561.3E98.ko 2.06 MB · 3 downloads i915.DS920.64561.3E98.ko 2.05 MB · 6 downloads Not working for me on DS920 with 8700K. Should it work? ID is 0x3E92. I thought it should be compatible with 8th gen? On your 920 version I tried following the guide https://imnks.com/6421.html Using hex editor I replaced all '983E' values with '923E' but get insmod: ERROR: could not insert module i915.ko: Invalid module format Should I be able to use your original file since it was for 3E92 or was it for previous DSM version? Edited June 5, 2023 by MrGarak Quote Link to comment Share on other sites More sharing options...
smilenkovski Posted June 5, 2023 Share #254 Posted June 5, 2023 @MrGarak You don't need driver for eight gen of intel. I have 8th gen and DS920+ and everything is working out of the box. 1 Quote Link to comment Share on other sites More sharing options...
MrGarak Posted June 5, 2023 Share #255 Posted June 5, 2023 (edited) 4 minutes ago, smilenkovski said: @MrGarak You don't need driver for eight gen of intel. I have 8th gen and DS920+ and everything is working out of the box. Thank you @smilenkovski so you didn't need to do anything extra after installing DSM to get /dev/dri to appear on baremetal? Not sure what went wrong in my case. It was working in 7.1. Edited June 5, 2023 by MrGarak Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 5, 2023 Share #256 Posted June 5, 2023 (edited) 18 минут назад, MrGarak сказал: you didn't need to do anything extra after installing DSM to get /dev/dri to appear on baremetal? yes, your CPU i7-8700K is supported by default. Not needs patch. Use original i915.ko for your model an version (it must be installed automatically with new 7.2 version). If you lost it, then just in case - the original version: i915.DS920.64561.ko (don't forget to rename when copying: cp -f i915.DS920.64561.ko /usr/lib/modules/i915.ko) Edited June 5, 2023 by dj_nsk 1 Quote Link to comment Share on other sites More sharing options...
Mirano Posted June 5, 2023 Share #257 Posted June 5, 2023 On 6/2/2023 at 12:07 PM, dj_nsk said: my files - no, they won't work with 10500T ! You can try to patch it yourself by analogy (I took the instructions from here). How much would it cost for you to make me a patched driver? thatd be amazing if it worked! Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 5, 2023 Share #258 Posted June 5, 2023 7 минут назад, Mirano сказал: How much would it cost for you to make me a patched driver? I sent you a private email last Friday Quote Link to comment Share on other sites More sharing options...
irishj Posted June 5, 2023 Share #259 Posted June 5, 2023 11 minutes ago, dj_nsk said: yes, your CPU i7-8700K is supported by default. Not needs patch. Use original i915.ko for your model an version (it must be installed automatically with new 7.2 version). If you lost it, then just in case - the original version: i915.DS920.64561.ko (don't forget to rename when copying: cp -f i915.DS920.64561.ko /usr/lib/modules/i915.ko) That's strange, I had an 8700K before my 9900K and always had to do something to get /dev/dri to show up, even back in the older days of Jun's loader. 1 Quote Link to comment Share on other sites More sharing options...
MrGarak Posted June 5, 2023 Share #260 Posted June 5, 2023 26 minutes ago, dj_nsk said: yes, your CPU i7-8700K is supported by default. Not needs patch. Use original i915.ko for your model an version (it must be installed automatically with new 7.2 version). If you lost it, then just in case - the original version: i915.DS920.64561.ko (don't forget to rename when copying: cp -f i915.DS920.64561.ko /usr/lib/modules/i915.ko) Thanks for the help. You guys are right, I done a clean install (wiped system settings) and /dev/dri is present. So confirmation 8th gen is supported on 920+/7.2 out of the box 👍 1 Quote Link to comment Share on other sites More sharing options...
Mirano Posted June 5, 2023 Share #261 Posted June 5, 2023 27 minutes ago, dj_nsk said: I sent you a private email last Friday so i've went to addons > installed it > configured it to use it > rebuild > booted but no /dev/dri. Does it require a reinstall? Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 5, 2023 Share #262 Posted June 5, 2023 (edited) 5 минут назад, Mirano сказал: so i've went to addons > installed it > configured it to use it > rebuild > booted but no /dev/dri. Does it require a reinstall? I didn't install it as an addon, just write it to /usr/lib/modules/i915.ko (use SSH). And reboot DSM. Edited June 5, 2023 by dj_nsk Quote Link to comment Share on other sites More sharing options...
Mirano Posted June 5, 2023 Share #263 Posted June 5, 2023 55 minutes ago, dj_nsk said: I didn't install it as an addon, just write it to /usr/lib/modules/i915.ko (use SSH). And reboot DSM. so i downloaded the file, renamed it to i915.ko moved it to /usr/lib/modules and rebooted, after that DSM wont boot anymore (black screen and nothing coming up on dhcp) Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 5, 2023 Share #264 Posted June 5, 2023 (edited) 40 минут назад, Mirano сказал: so i downloaded the file, renamed it to i915.ko moved it to /usr/lib/modules and rebooted, after that DSM wont boot anymore (black screen and nothing coming up on dhcp) Then it is better to return the original i915.ko file. Which model do you have - 918 or 920? and version - 7.2? As I understand it, you can return it through the installation of modules in the loader (at the same time, check if you still have the option that you installed earlier?). The original file should be named i915.ko (always!) [upd]: I usually check all such actions for myself on a test VM. But I can't check with another CPU - if there is someone with Core i5-10500/Core i3-10300 under ESXi - can you check? Edited June 5, 2023 by dj_nsk Quote Link to comment Share on other sites More sharing options...
Mirano Posted June 5, 2023 Share #265 Posted June 5, 2023 9 minutes ago, dj_nsk said: Then it is better to return the original i915.ko file. Which model do you have - 918 or 920? and version - 7.2? As I understand it, you can return it through the installation of modules in the loader (at the same time, check if you still have the option that you installed earlier?). The original file should be named i915.ko (always!) [upd]: I usually check all such actions for myself on a test VM. But I can't check with another CPU - if there is someone with Core i5-10500/Core i3-10300 under ESXi - can you check? 920 and 7.2 correct. running ona HP 400 g9 mini on UEFI Boot Yeah i have Unraid and ESXI running, but unraid is 12th gen and esxi is intel xeon Quote Link to comment Share on other sites More sharing options...
Mirano Posted June 5, 2023 Share #266 Posted June 5, 2023 9 minutes ago, dj_nsk said: Then it is better to return the original i915.ko file. Which model do you have - 918 or 920? and version - 7.2? As I understand it, you can return it through the installation of modules in the loader (at the same time, check if you still have the option that you installed earlier?). The original file should be named i915.ko (always!) [upd]: I usually check all such actions for myself on a test VM. But I can't check with another CPU - if there is someone with Core i5-10500/Core i3-10300 under ESXi - can you check? Upd: so my way of implementing the driver was correct, right? Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 5, 2023 Share #267 Posted June 5, 2023 (edited) 22 минуты назад, Mirano сказал: Upd: so my way of implementing the driver was correct, right? I don't know, I did it by simple copying, without using a loader. Perhaps such a patch is no longer suitable for the 10th generation [add]: I made test patches for DS918+ and DS920+ 7.2-64561 CPU IDs: 0x3E98 0x9BC5 0x9BC8 0x4C8A 0x4C8B 0x9A49 0x9A68 0x9BA8 who can test at least one of the 10-11 Gen CPUs on a test machine? Edited June 5, 2023 by dj_nsk Quote Link to comment Share on other sites More sharing options...
naoki66 Posted June 5, 2023 Share #268 Posted June 5, 2023 (edited) i3-10100t 0x9BC8 pve 7.4-3 DVA1622 65461 [error]Failed to open /dev/dri/card0 root@DVA:~# ls /dev/dri ls: cannot access '/dev/dri': No such file or directory root@DVA:~# lspci -tvnnq -+-[0001:01]---00.0 Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] \-[0000:00]-+-00.0 Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] +-1a.0 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] +-1a.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] +-1a.2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] +-1a.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] +-1b.0 Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] +-1c.0-[01]----00.0 Intel Corporation Comet Lake SATA AHCI Controller [8086:06d2] +-1c.1-[02]----00.0 Intel Corporation CometLake-S GT2 [UHD Graphics 630] [8086:9bc8] +-1c.2-[03]-- +-1c.3-[04]-- +-1d.0 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] +-1d.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] +-1d.2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] +-1d.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] +-1e.0-[05-09]--+-01.0-[06]--+-03.0 Red Hat, Inc. Virtio memory balloon [1af4:1002] | | +-07.0 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controll er [AHCI mode] [8086:2922] | | +-12.0 Red Hat, Inc. Virtio network device [1af4:1000] | | \-13.0 Red Hat, Inc. Virtio network device [1af4:1000] | +-02.0-[07]-- | +-03.0-[08]-- | \-04.0-[09]-- +-1f.0 Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] +-1f.2 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] \-1f.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] Edited June 5, 2023 by naoki66 Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 5, 2023 Share #269 Posted June 5, 2023 53 минуты назад, naoki66 сказал: i3-10100t 0x9BC8 ... DVA1622 65461 [error]Failed to open /dev/dri/card0 We are discussing here only DS918+/DS920+. I don't know if it is possible to install a driver i915.ko for DVAxxxx - see other topics... Quote Link to comment Share on other sites More sharing options...
The_Dave Posted June 10, 2023 Share #270 Posted June 10, 2023 (edited) So I just updated to dsm 7.2 DS920+ and realized afterwards that apparently /dev/dri/ is no longer available. I have an old board with a J4105. I would really appreciate a hint to get hw transcoding working again. The board is an ASRock 90-MXB6N0-A0UAYZ if that helps Edited June 10, 2023 by The_Dave Quote Link to comment Share on other sites More sharing options...
scoobdriver Posted June 11, 2023 Share #271 Posted June 11, 2023 On 6/5/2023 at 3:04 PM, dj_nsk said: I don't know, I did it by simple copying, without using a loader. Perhaps such a patch is no longer suitable for the 10th generation [add]: I made test patches for DS918+ and DS920+ 7.2-64561 CPU IDs: 0x3E98 0x9BC5 0x9BC8 0x4C8A 0x4C8B 0x9A49 0x9A68 0x9BA8 who can test at least one of the 10-11 Gen CPUs on a test machine? @dj_nsk I have a rocketlake 11400T I’d been trying jim3ma sa6400 to get it working , I could try your parch /ko with 918 or 920. Are you able to provide it. My cpu /igpu is uhd730 device Id 0x4C8B Quote Link to comment Share on other sites More sharing options...
EnixSpike Posted June 25, 2023 Share #272 Posted June 25, 2023 On 6/5/2023 at 10:04 PM, dj_nsk said: I don't know, I did it by simple copying, without using a loader. Perhaps such a patch is no longer suitable for the 10th generation [add]: I made test patches for DS918+ and DS920+ 7.2-64561 CPU IDs: 0x3E98 0x9BC5 0x9BC8 0x4C8A 0x4C8B 0x9A49 0x9A68 0x9BA8 who can test at least one of the 10-11 Gen CPUs on a test machine? My CPU is i3 10105, I think it should be 0x9BC8. I used the patch for DS920+ on DSM7.1.1-42962, everything works just fine. jellyfin etc. Last friday, I update to DSM 7.2-64570, I replace the i915.ko after updated as usual, then reboot. well, it did reboot, and I can find it in the Synology Assistant for 1s. then it shutdown itself. I can wol it again. then it will shutdown again. I don't know what happened. I assume it won't work on DSM 7.2 any longer. so I can give a try on your test patches. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted June 25, 2023 Share #273 Posted June 25, 2023 2 hours ago, EnixSpike said: My CPU is i3 10105, I think it should be 0x9BC8. I used the patch for DS920+ on DSM7.1.1-42962, everything works just fine. jellyfin etc. Last friday, I update to DSM 7.2-64570, I replace the i915.ko after updated as usual, then reboot. well, it did reboot, and I can find it in the Synology Assistant for 1s. then it shutdown itself. I can wol it again. then it will shutdown again. I don't know what happened. I assume it won't work on DSM 7.2 any longer. so I can give a try on your test patches. Which loader do you use? Did you rebuild the loader for DSM 7.2? Quote Link to comment Share on other sites More sharing options...
EnixSpike Posted June 25, 2023 Share #274 Posted June 25, 2023 56 minutes ago, Peter Suh said: Which loader do you use? Did you rebuild the loader for DSM 7.2? I used the arpl-i18n-23.6.6 loader. as you can see many people successfully upgraded DSM 7.2 by using this. Yes you will need to rebuild loader for DSM 7.2. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted June 25, 2023 Share #275 Posted June 25, 2023 1 hour ago, EnixSpike said: I used the arpl-i18n-23.6.6 loader. as you can see many people successfully upgraded DSM 7.2 by using this. Yes you will need to rebuild loader for DSM 7.2. So, if you haven't already built a loader for 7.2, please do so now. Or My M SHELL for TCRP could be an alternative if you're thinking of giving it a try as a loader. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.