cferra Posted February 24, 2022 Share #251 Posted February 24, 2022 4 minutes ago, cferra said: i see the following with lspci -v 0000:04:00.0 Class 0200: Device 15b3:1003 Subsystem: Device 15b3:0055 Flags: bus master, fast devsel, latency 0, IRQ 39 Memory at fb200000 (64-bit, non-prefetchable) [size=1M] Memory at f9800000 (64-bit, prefetchable) [size=8M] Expansion ROM at fb100000 [disabled] [size=1M] Capabilities: [40] Power Management version 3 Capabilities: [48] Vital Product Data Capabilities: [9c] MSI-X: Enable+ Count=128 Masked- Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [c0] Vendor Specific Information: Len=18 <?> Capabilities: [100] Alternative Routing-ID Interpretation (ARI) Capabilities: [148] Device Serial Number f4-52-14-03-00-3c-e9-c0 Capabilities: [154] Advanced Error Reporting Capabilities: [18c] Secondary PCI Express Kernel driver in use: mlx4_core seemingly it is using the driver, but still no network interface is enabled for it in the gui additionally typing in modinfo in in putty to the synology returns a command not found error. Quote Link to comment Share on other sites More sharing options...
aportnov Posted February 24, 2022 Share #252 Posted February 24, 2022 I tried to run it on another PC with one Intel network card and there is the same situation. On the main realtek card. Quote Link to comment Share on other sites More sharing options...
cferra Posted February 24, 2022 Share #253 Posted February 24, 2022 if we can lick these small issues down, this image would be in good shape. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 24, 2022 Share #254 Posted February 24, 2022 (edited) @pocopico Below are the changes to the e1000e driver version up 21 hours ago. Is it for self-test using DSM 7.0.1 driver in DSM 7.1 beta? "ds3622xsp_42218": "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3622xsp_42218.json", "ds3622xsp_42550": "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3622xsp_42218.json", Edited February 24, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 24, 2022 Share #255 Posted February 24, 2022 (edited) 8 minutes ago, Peter Suh said: @pocopico Below are the changes to the e1000e driver version up 21 hours ago. Is it for self-test using DSM 7.0.1 driver in DSM 7.1 beta? "ds3622xsp_42218": "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3622xsp_42218.json", "ds3622xsp_42550": "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3622xsp_42218.json", Yes, i havent manage to boot the kernel yet though Edited February 24, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
p33ps Posted February 24, 2022 Share #256 Posted February 24, 2022 Hey, For any reason, my virtio NICs added in a Proxmox VM in HP Proliant Gen8 are not detected when I check the ejecute the "listmods" parameter. I'd like to add the external extension but I can't find the proper json here. Could someone point me out where to find it? Thanks! Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 24, 2022 Share #257 Posted February 24, 2022 (edited) 1 hour ago, p33ps said: Hey, For any reason, my virtio NICs added in a Proxmox VM in HP Proliant Gen8 are not detected when I check the ejecute the "listmods" parameter. I'd like to add the external extension but I can't find the proper json here. Could someone point me out where to find it? Thanks! I may be wrong but virtio drivers are natively included in redpill loader when you build it. Edit : https://github.com/dogodefi/redpill-load/blob/master/bundled-exts.json https://raw.githubusercontent.com/jumkey/redpill-load/develop/redpill-virtio/rpext-index.json Edited February 24, 2022 by Orphée Quote Link to comment Share on other sites More sharing options...
p33ps Posted February 24, 2022 Share #258 Posted February 24, 2022 9 minutes ago, Orphée said: I may be wrong but virtio drivers are natively included in redpill loader when you build it. I supposed that too. See below: tc@box:~$ lspci | grep Ethernet 00:12.0 Ethernet controller: Red Hat, Inc Virtio network device 00:13.0 Ethernet controller: Red Hat, Inc Virtio network device When I check the mods: tc@box:~$ sudo ./rploader.sh listmods broadwellnk-7.0.1-42218 jq: error (at <stdin>:1): Cannot iterate over null (null) jq: error (at <stdin>:1): Cannot iterate over null (null) Loader source : https://github.com/dogodefi/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/dogodefi/redpill-lkm.git : Redpill module branch : develop Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE= modules.alias.4.json Checking Internet Access -> OK Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found IDE Controller : pciid 8086d00007010 Required Extension : No matching extension Found VGA Controller : pciid 1234d00001111 Required Extension : bochs_drm bochs_drm Searching for matching extension for bochs_drm Found SATA Controller : pciid 8086d00002922 Required Extension : ahci Searching for matching extension for ahci Found Ethernet Interface : pciid 1af4d00001000 Required Extension : No matching extension Found Ethernet Interface : pciid 1af4d00001000 Required Extension : No matching extension ------------------------------------------------------------------------------------------------ Quote Link to comment Share on other sites More sharing options...
cferra Posted February 24, 2022 Share #259 Posted February 24, 2022 If anyone is interested I picked up an official synology Sas3 hba for use - willing to assist with testing if it would be helpful. I’m debating on getting an official synology 10gig card tooSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 24, 2022 Share #260 Posted February 24, 2022 11 hours ago, cferra said: 0000:04:00.0 Class 0200: Device 15b3:1003 that id is in the driver pocopico uses and if the lspci was from the actual 7.0.1 installation then the driver is laoded whats in dmesg about the loading of the mlx4_core.ko and after that, there should be any error about mlx if it does not come up with a network interface in the gui Quote Link to comment Share on other sites More sharing options...
cferra Posted February 24, 2022 Share #261 Posted February 24, 2022 I’m a bit of a Linux noob - which command should I run? Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 24, 2022 Share #262 Posted February 24, 2022 2 hours ago, cferra said: which command should I run? either you can use dmesg as command (or dmesg|more) or open the file /var/log/dmesg in a editor (or copy it local on the nas to a folder in /volume1 that has a windows share so you can it use with windows or post it here Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 24, 2022 Share #263 Posted February 24, 2022 Hi all, Trying to install DS3622xs+ on a Ryzen system CPU Ryzen 5 2600 6 cores 16 GB Ram Motherboard is a Gigabyte B450M DS3H I built the loader and Sata map was added as follows: DiskIdMap=0001 SataPortMap=91 this give me a error that something went wrong Can someone please help me with this, I'm only using 1 hard drive for the moment to see how this would run on a Ryzen system (Test Machine) this SataMap is the biggest pain at the moment... Thanks all good day ! Quote Link to comment Share on other sites More sharing options...
ed_co Posted February 24, 2022 Share #264 Posted February 24, 2022 Does DS3622xs+ have tranconding like the 918+? Thanks!! Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 24, 2022 Share #265 Posted February 24, 2022 51 minutes ago, ed_co said: Does DS3622xs+ have tranconding like the 918+? Thanks!! I'm Plexing it right now, watching a movie works great on a Xeon E5 2420 v2... Quote Link to comment Share on other sites More sharing options...
cferra Posted February 24, 2022 Share #266 Posted February 24, 2022 @IG-88@pocopico I can confirm that commenting out the detection of my mlx card and building the loader resulted in a working interface! I am not sure what needs to be modified in the script to allow for this to work, but maybe something can be worked out? in the interim, someone who wanted to build this with MLX3 card could, take the card out of the machine, build the loader and then install the card again after the loader is built for the initial boot. Quote Link to comment Share on other sites More sharing options...
cferra Posted February 25, 2022 Share #267 Posted February 25, 2022 Maybe an option asking if the user wanted to load all drivers or select which ones. Might help with cases like this. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 25, 2022 Share #268 Posted February 25, 2022 1 hour ago, ed_co said: Does DS3622xs+ have tranconding like the 918+? Thanks!! I'm Plexing it right now, watching a movie works great on a Xeon E5 2420 v2... Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 25, 2022 Share #269 Posted February 25, 2022 @pocopico can you check the bnx drivers Your loader will not bring up a network on a Dell R410 trying to install DS3622xs+ I added a intel nic and I was able to make the loader, it pulled the drivers for bnx but that interface did not work when i pulled the intel nic card out to test it... Might be incomplete ? please advise thanks Quote Link to comment Share on other sites More sharing options...
Green Posted February 25, 2022 Share #270 Posted February 25, 2022 3 hours ago, ed_co said: Does DS3622xs+ have tranconding like the 918+? Thanks!! I think the answer is PLeX Transcoding needs a IGPU for hardware transcoding. Celerons & i3,i5,i7 have an IGPU. Xeon CPU's do not and therefor can not do the hardware transcoding you are thinking of. The question is eventho the DS3622xs+ has a xeon cpu ,But since it a newer cpu than what is in the 918+ is the PLeX transcoding ability in the pat file like it should be in the 918+ pat file, since the 918+ does Plex transcoding. So, if setting up Xpenology mainly for plex with an newer i7 cpu should we use the 918+ or DS3622xs+ setup ? Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 25, 2022 Share #271 Posted February 25, 2022 2 hours ago, Green said: I think the answer is PLeX Transcoding needs a IGPU for hardware transcoding. Celerons & i3,i5,i7 have an IGPU. Xeon CPU's do not and therefor can not do the hardware transcoding you are thinking of. The question is eventho the DS3622xs+ has a xeon cpu ,But since it a newer cpu than what is in the 918+ is the PLeX transcoding ability in the pat file like it should be in the 918+ pat file, since the 918+ does Plex transcoding. So, if setting up Xpenology mainly for plex with an newer i7 cpu should we use the 918+ or DS3622xs+ setup ? You don't need a GPU to transcode with plex, you have the option of letting plex do it or choose hardware transcoding if you have a plexpass paid account. My system transcodes fine with no gpu. Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 25, 2022 Share #272 Posted February 25, 2022 2 hours ago, Green said: I think the answer is PLeX Transcoding needs a IGPU for hardware transcoding. Celerons & i3,i5,i7 have an IGPU. Xeon CPU's do not and therefor can not do the hardware transcoding you are thinking of. The question is eventho the DS3622xs+ has a xeon cpu ,But since it a newer cpu than what is in the 918+ is the PLeX transcoding ability in the pat file like it should be in the 918+ pat file, since the 918+ does Plex transcoding. So, if setting up Xpenology mainly for plex with an newer i7 cpu should we use the 918+ or DS3622xs+ setup ? You don't need a GPU to transcode with plex, you have the option of letting plex do it or choose hardware transcoding if you have a plexpass paid account. My system transcodes fine with no gpu. I even have a Ryzen 5 2600 with no gpu transcoding my movies.... Quote Link to comment Share on other sites More sharing options...
Green Posted February 25, 2022 Share #273 Posted February 25, 2022 After taking a second look ,, I see that the important thing is Quick Sync and newer Xeons have the feature. I withdraw my question Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted February 25, 2022 Share #274 Posted February 25, 2022 8 hours ago, painkiller895 said: Hi all, Trying to install DS3622xs+ on a Ryzen system CPU Ryzen 5 2600 6 cores 16 GB Ram Motherboard is a Gigabyte B450M DS3H I built the loader and Sata map was added as follows: DiskIdMap=0001 SataPortMap=91 this give me a error that something went wrong Can someone please help me with this, I'm only using 1 hard drive for the moment to see how this would run on a Ryzen system (Test Machine) this SataMap is the biggest pain at the moment... Thanks all good day ! I figured it out after 5 edits and reboots... DiskIdMap=01 SataPortMap=02 Thanks again 2 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 25, 2022 Share #275 Posted February 25, 2022 9 hours ago, cferra said: @IG-88@pocopico I can confirm that commenting out the detection of my mlx card and building the loader resulted in a working interface! I am not sure what needs to be modified in the script to allow for this to work, but maybe something can be worked out? in the interim, someone who wanted to build this with MLX3 card could, take the card out of the machine, build the loader and then install the card again after the loader is built for the initial boot. i suggested in a PM to remove the mlx driver(s) from the rp-loader and let take over the DSM's build-in drivers (when installing with just a mlx card present as nic that method is not going to work because in syno's rd.gz on the loader is no mlx driver) !!! please provide the dmesg log from when @pocopico's driver was active maybe we can see whats going on - i think just mlx_core.ko as in @pocopico's driver repository is not enough, it also needs mlx4_en.ko (en - like ethernet, ib would be inifin band, so we dont need ib in most cases) in synologys (external) driver also mlx4_core.ko depends on mlx_compat.ko, because of external mlx driver source i can't build original kernels own mlx drivers with synology's kernel and kernel includes, looks they modded in a way that only builds with external source (or i have messed up my build system) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.