pocopico Posted June 7, 2023 Author Share #4751 Posted June 7, 2023 On 6/5/2023 at 8:22 AM, Dvalin21 said: Is there a full list of all supported devices? I know the following devices support cpus/threads 20 or higher (which is what I'm looking for) FS3600 Intel Xeon D-15671224✓ Broadwellnk DDR4 ECC RDIMM 16GB (24 threads) HD6500 Intel Xeon Silver 4210R x 21020✓PurleyDDR4 ECC RDIMM 64GB (20 threads) SA6400 AMD EPYC 72721224✓Epyc7002DDR4 ECC RDIMM 32GB (24 threads) SA3610 Intel Xeon D-15671224✓Broadwellnkv2DDR4 ECC RDIMM 16GB (24 threads) SA3600 Intel Xeon D-15671224✓BroadwellnkDDR4 ECC RDIMM 16GB (24 threads) Thanks in advance https://github.com/pocopico/tinycore-redpill/wiki/TCRP-Web-Builder Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted June 7, 2023 Share #4752 Posted June 7, 2023 (edited) 17 minutes ago, pocopico said: https://github.com/pocopico/tinycore-redpill/wiki/TCRP-Web-Builder Would it be possible to request one of the platforms I mentioned to be added? Would love to be able to use more than 16 cores/threads with xpenology. Also thanks for the list. I saw that the DVA1622: 7.0.1 U6 -> 7.1.0 U4 -> 7.1.1 U5 -> 7.2.0 is available. It uses a celeron cpu with also uses intel integrated gpu 600. The intel cpus i3-i7 7th gen uses 630. This is uses with opencv with this devices for face detection, person detection and so on. Would using the 7th gen cpu work for this platform to get face detection working? Thanks. Edited June 7, 2023 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
goRt Posted June 7, 2023 Share #4753 Posted June 7, 2023 4 hours ago, dusty_dragon said: Thanks in advance for a great work TinyCore RedPill Loader (TCRP) I am also trying to run this on hyper-v (Windows 11) by creating a "tinycore-redpill-uefi.v0.9.4.8.vhdx" file from "tinycore-redpill-uefi.v0.9.4.8.iso" For my case, Windows 11 hyper-v does not boot from the tinycrore iso image. Since installation media is not usb, the command "sudo ./rploader.sh identifyusb" does not work. After building with "sudo ./rploader.sh build ds3615xs-7.1.0-42661", the system does not work. I think Grub has been lost. Before building - Running from hyper-v ; booted from a disk (not a usb) after building - ssh connection is lost: Cannot start VM after building cat user_config.json: BIOS needs to be set to UEFI boot Quote Link to comment Share on other sites More sharing options...
dusty_dragon Posted June 7, 2023 Share #4754 Posted June 7, 2023 9 hours ago, goRt said: BIOS needs to be set to UEFI boot Has it worked for you? I changed to UEFI on Hyper-V and booted with a hard disk converted from tinycore-redpill-uefi.v0.9.4.8.img. to *.vhdx. No luck getting it to work. I wonder if "tinycore-redpill-uefi.v0.9.4.8" can ever be run of Hyper-V? Quote Link to comment Share on other sites More sharing options...
pcristi Posted June 7, 2023 Share #4755 Posted June 7, 2023 (edited) Try StarWind V2V to convert "tinycore-redpill-uefi.v0.9.4.8" to vhdx and add to a Hyper-V Gen 2 VM, secure boot disabled, for me TCRP boot. Hyper-V have not support for sata disk don't if rely can boot DSM. For testing propose can try install Proxmox on Hyper-V, set Nested Virtualization for Proxmox VM and install TCRP in Proxmox, but will ending with DSM running in Proxmox and not Hyper-V. Edited June 7, 2023 by pcristi Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted June 7, 2023 Share #4756 Posted June 7, 2023 On 6/7/2023 at 12:13 AM, Unregistrado said: Tried to update ds3622xs+ to 7.2 using webinterface but doesn't recognize any harddrive connected to HBA card LSI SAS2008. Tried also the ds3617xs+ same result. Used the same sataportmap and diskidxmap settings as it was before. Quote Link to comment Share on other sites More sharing options...
dusty_dragon Posted June 8, 2023 Share #4757 Posted June 8, 2023 5 hours ago, pcristi said: Try StarWind V2V to convert "tinycore-redpill-uefi.v0.9.4.8" to vhdx and add to a Hyper-V Gen 2 VM, secure boot disabled, for me TCRP boot. Hyper-V have not support for sata disk don't if rely can boot DSM. For testing propose can try install Proxmox on Hyper-V, set Nested Virtualization for Proxmox VM and install TCRP in Proxmox, but will ending with DSM running in Proxmox and not Hyper-V. I really want to get this working on Hyper-V, as windows is my main machine. I am not sure whether this can be ever achieved. Quote Link to comment Share on other sites More sharing options...
pocopico Posted June 8, 2023 Author Share #4758 Posted June 8, 2023 5 hours ago, Unregistrado said: Can you access the ttyd login through http://192.168.0.147:7681 and execute an fdisk -l ? Quote Link to comment Share on other sites More sharing options...
goRt Posted June 8, 2023 Share #4759 Posted June 8, 2023 14 hours ago, dusty_dragon said: Has it worked for you? I changed to UEFI on Hyper-V and booted with a hard disk converted from tinycore-redpill-uefi.v0.9.4.8.img. to *.vhdx. No luck getting it to work. I wonder if "tinycore-redpill-uefi.v0.9.4.8" can ever be run of Hyper-V? Sorry, not running in Hyper-V, but that error indicates not booting in UEFI Quote Link to comment Share on other sites More sharing options...
marchidaniele Posted June 8, 2023 Share #4760 Posted June 8, 2023 9 hours ago, Unregistrado said: Me too, with VMware with loader 0.9.4.9, platform RS4021xs and dsm 7.2 with pass through LSI SAS3008. No disks recognizes from controller LSI, no problem with first disk attach on second SATA controller (first for loader vmdk 0:0) Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted June 8, 2023 Share #4761 Posted June 8, 2023 Now i cant rebuild the loader. <br>extracommands : <br>Could not determine if file ds3622xsp_64561.pat is encrypted or not, maybe corrupted -rw-r--r-- 1 tc staff 3322 Jun 8 10:15 ds3622xsp_64561.pat <br>041 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted June 8, 2023 Share #4762 Posted June 8, 2023 @pocopico Apparently there was a release from Synology that 7.2-64561 has an issue where if the device is not connect to the internet, some how it fails. They have released version 7.2-64570. It seems to be a full 360mb pat file verses an update. 1 Quote Link to comment Share on other sites More sharing options...
minigranis Posted June 8, 2023 Share #4763 Posted June 8, 2023 10 hours ago, Unregistrado said: Now i cant rebuild the loader. <br>extracommands : <br>Could not determine if file ds3622xsp_64561.pat is encrypted or not, maybe corrupted -rw-r--r-- 1 tc staff 3322 Jun 8 10:15 ds3622xsp_64561.pat <br>041 The 64562 version has been recalled by Synology, hence you get a errormessage. @pocopico Perhaps a check (filesize or something) can be done to get a more "correct" error message when this happens, I spent quite some time to figure it out 1 Quote Link to comment Share on other sites More sharing options...
Al lex Posted June 9, 2023 Share #4764 Posted June 9, 2023 10 hours ago, minigranis said: The 64562 version has been recalled by Synology, hence you get a errormessage. @pocopico Perhaps a check (filesize or something) can be done to get a more "correct" error message when this happens, I spent quite some time to figure it out Yep, I ahe just noticed that when occasionally tried to ckeck PAT file on the syno page Quote Link to comment Share on other sites More sharing options...
marchidaniele Posted June 9, 2023 Share #4765 Posted June 9, 2023 22 hours ago, marchidaniele said: Me too, with VMware with loader 0.9.4.9, platform RS4021xs and dsm 7.2 with pass through LSI SAS3008. No disks recognizes from controller LSI, no problem with first disk attach on second SATA controller (first for loader vmdk 0:0) For this, missing driver of controller with new loader? Quote Link to comment Share on other sites More sharing options...
hansel Posted June 9, 2023 Share #4766 Posted June 9, 2023 (edited) I've got this message after building a new TCRP (tinycore-redpill.v0.9.4.9) loader. As far as I know my N40L doesn't support EFI. Just before (or after?) this page, by escaping the boot sequens, I did a fdisk -l command and saw all four disks. I could reach the webpage http:<ipaddress>:7681 just before it said "Connection Closed" There is no way connecting with TCRP remotely by ssh. [Update] I rebuild TCRP again, setting user_config settings first and building the loader after that (instead of the other way around). The result being On the vga connected screen there is a message "Nothing has been loaded!". Edited June 9, 2023 by hansel Quote Link to comment Share on other sites More sharing options...
hansel Posted June 9, 2023 Share #4767 Posted June 9, 2023 After doiing another update, postupdate (where it found the update 7.1.1.-6) and reboot into DSM, the hdd led finally went blinking continiously. It was doing something! After a few minutes I could login into DSM webpage and see the 7.1.1 update 6. Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted June 9, 2023 Share #4768 Posted June 9, 2023 I got also back online but used arc loader. TCRP loader is a great loader. But I saw some interesting stuff in the arc loader. Like downgrading, forced reinstall, reset admin password. Don’t know if Pocopico is going to add this stuff? I didn’t get the result that I expected with the webbrowser builder of TCRP. But it is really great, straightforward, the way to go! Some feedback, the building log stands in the way when I want to push the builder button. I used Firefox on w10 machine. So certainly great job! 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted June 11, 2023 Share #4769 Posted June 11, 2023 On 6/9/2023 at 10:08 PM, hansel said: After doiing another update, postupdate (where it found the update 7.1.1.-6) and reboot into DSM, the hdd led finally went blinking continiously. It was doing something! After a few minutes I could login into DSM webpage and see the 7.1.1 update 6. Did you succeed in installing DSM on your N40L through the above TCRP FRIEND loader? Quote Link to comment Share on other sites More sharing options...
hansel Posted June 12, 2023 Share #4770 Posted June 12, 2023 18 hours ago, Peter Suh said: Did you succeed in installing DSM on your N40L through the above TCRP FRIEND loader? I think so. I downloaded most recent version from github. I noticed the 4th bootoption called "withfriend". After that I started DSM, boot option 1. I'm running it headless now. Can I check things remote for you? 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted June 12, 2023 Share #4771 Posted June 12, 2023 28 minutes ago, hansel said: I think so. I downloaded most recent version from github. I noticed the 4th bootoption called "withfriend". After that I started DSM, boot option 1. I'm running it headless now. Can I check things remote for you? I understand your choice. Pocopico's TCRP can use both Jot (1st, 2nd) and FRIEND (4th) in the GRUB boot menu. You succeeded with JOT, not FRIEND. Thank you for answer. Quote Link to comment Share on other sites More sharing options...
pocopico Posted June 12, 2023 Author Share #4772 Posted June 12, 2023 (edited) 43 minutes ago, hansel said: I think so. I downloaded most recent version from github. I noticed the 4th bootoption called "withfriend". After that I started DSM, boot option 1. I'm running it headless now. Can I check things remote for you? To my knowledge, Microservers G7 are having issues with kexec so no Friend for NXX. You can instead use the staticboot option on user_config.json and in case of an upgrade, selecting TCRP Friend will process an upgrade but will reboot and default to USB after that. Edited June 12, 2023 by pocopico Quote Link to comment Share on other sites More sharing options...
Orphée Posted June 12, 2023 Share #4773 Posted June 12, 2023 Yes, on ARPL side you must enable "direct boot" to true in a advanced menu for N54L, it is probably because the same issue. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted June 12, 2023 Share #4774 Posted June 12, 2023 (edited) 1 hour ago, Orphée said: Yes, on ARPL side you must enable "direct boot" to true in a advanced menu for N54L, it is probably because the same issue. I imported ARPL's grub.cfg. Your prediction is correct. TCRP's jot is the same as using the kernel as Direct. if [ -s /zImage-dsm -a -s /initrd-dsm ]; then if [ "${default}" = "direct" ]; then set timeout="1" menuentry 'Boot DSM kernel directly' --id direct { set_gfxpayload echo "cmdline:" echo "${dsm_cmdline}" echo "Loading DSM kernel..." linux /zImage-dsm ${dsm_cmdline} echo "Loading DSM initramfs..." initrd /initrd-dsm echo "Booting..." echo "Access http://find.synology.com/ to connect the DSM via web." } fi menuentry 'Boot DSM' --id boot { set_gfxpayload echo "Loading kernel..." linux /bzImage-arpl console=${TERM} net.ifnames=0 echo "Loading initramfs..." initrd /initrd-arpl echo "Booting..." } menuentry 'Force re-install DSM' --id junior { set_gfxpayload echo "Loading kernel..." linux /bzImage-arpl console=${TERM} net.ifnames=0 force_junior echo "Loading initramfs..." initrd /initrd-arpl echo "Booting..." } fi Edited June 12, 2023 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
altas Posted June 12, 2023 Share #4775 Posted June 12, 2023 anyone how get an HP GEN8 running on DSM 7.2, with Upgrade process? mine is still on a old 7.0 installation Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.