TinyCore RedPill Loader (TCRP)

[Peter Suh]

31 minutes ago, kgymac said:

Try supported model:

 

https://github.com/pocopico/rp-ext/blob/main/hpsa/rpext-index.json

 

And read the error messages during the build.

rp-ext working, if you use supported model and dsm version.

 

The module they are trying above is for DSM 7.2.
7.2 uses kernel version 4.4.302+.
7.1 uses kernel version 4.4.180+.
The link you shared is for 7.1 and is not kernel version compatible.
The module for 7.2 was recompiled by pocopico in response to kernel version 4.4.302+, but the reason for not working seems to be elsewhere.

 

https://github.com/pocopico/redpill-modules/blob/master/broadwellnk-4.4.302/hpsa.ko

Edited May 31, 2023 by Peter Suh

[kgymac]

3 hours ago, Peter Suh said:

 

The module they are trying above is for DSM 7.2.
7.2 uses kernel version 4.4.302+.
7.1 uses kernel version 4.4.180+.
The link you shared is for 7.1 and is not kernel version compatible.
The module for 7.2 was recompiled by pocopico in response to kernel version 4.4.302+, but the reason for not working seems to be elsewhere.

 

https://github.com/pocopico/redpill-modules/blob/master/broadwellnk-4.4.302/hpsa.ko

I don't have a problem with it. It doesn't work for him. No discs found. I don't understand why he it forcing dsm7.2.

[soulcola]

Hello!

I'm trying to build a bootloader, but always get error:

 

Checking if a newer version exists on the main repo -> Version is current
fatal: repository 'null' does not exist
fatal: repository 'null' does not exist
...

./rploader.sh: line 2964: cd: /home/tc/redpill-load: No such file or directory
...

Failed to download PAT file //mnt/sda3/auxfiles/dva1622_64561.pat from

 

What I'm doing wrong?

 

 

UPD

Dont't know why, but the problem only occurs if I update bootloader in comand line. Without updating everything works fine

Edited June 1, 2023 by soulcola

[soulcola]

5 часов назад, soulcola сказал:

Hello!

I'm trying to build a bootloader, but always get error:

 

Checking if a newer version exists on the main repo -> Version is current
fatal: repository 'null' does not exist
fatal: repository 'null' does not exist
...

./rploader.sh: line 2964: cd: /home/tc/redpill-load: No such file or directory
...

Failed to download PAT file //mnt/sda3/auxfiles/dva1622_64561.pat from

 

What I'm doing wrong?

 

 

UPD

Dont't know why, but the problem only occurs if I update bootloader in comand line. Without updating everything works fine

 

Now i get this error

Module does not contain platorm information for dva1622_42962

 

Is it only mine or something is wrong in repo?

[pcristi]

For dva1622_42962 try old v0.9.4.4 without updating the rploader.sh.

[extenue]

5 hours ago, soulcola said:

 

Now i get this error

Module does not contain platorm information for dva1622_42962

 

Is it only mine or something is wrong in repo?

 

I should come back here before posting there ... Redpill broken this week ? - General Installation Questions/Discussions (non-hardware specific) - XPEnology Community

 

Glad I am not the only one ... 

 

I saw a lot of activities on the repo , today the same 4.7 version has been uploaded multiple time , yesterday it was branded 4.7 bur filename was still 4.6

 

I've tried with 0.9.4.5 without update.sh but I got same issues , I bet I need to retry using 0.9.4.0 without update , what is killing me is it works two days ago but not yesterday and it's failing still today with 4.5

Edited June 1, 2023 by extenue

[soulcola]

1 час назад, extenue сказал:

 

I should come back here before posting there ... Redpill broken this week ? - General Installation Questions/Discussions (non-hardware specific) - XPEnology Community

 

Glad I am not the only one ... 

 

I saw a lot of activities on the repo , today the same 4.7 version has been uploaded multiple time , yesterday it was branded 4.7 bur filename was still 4.6

 

I've tried with 0.9.4.5 without update.sh but I got same issues , I bet I need to retry using 0.9.4.0 without update , what is killing me is it works two days ago but not yesterday and it's failing still today with 4.5

Try 0.9.4.7 webbuilder supersecret feature which is located at tcrp IP address. 

It works for me without errors

[extenue]

4 hours ago, soulcola said:

Try 0.9.4.7 webbuilder supersecret feature which is located at tcrp IP address. 

It works for me without errors

I don't understand what you mean with "0.9.4.7 webbuilder supersecret feature which is located at tcrp IP address."

 

I've  justed the newly 0.9.4.8 as well as 0.9.4.4 without any update and for both I get the below whereas it did work flawlessly two days ago on executing the EXACT same commands

 

"Looking for redpill for : ds3622xsp_42962
Module does not contain platorm information for ds3622xsp_42962"

 

I am lost

 

EDIT : I think the developer is in panic mode or so .. (joke of course) , I just see a new 0.9.4.8 released 5 min ago

 

EDIT 2 : still same ... please does anyone can explain what's going on ?

 

There is no more errors on the output like earlier today and yesterday but it's still impossible to build a loader

 

I don't know what I can do to help , sorry

 

SYNOMODEL : ds3622xsp_42962
MODEL : DS3622xs+
Local Cache Folder : /mnt/sdf3/auxfiles
DATE Internet : 01062023 Local : 01062023
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Version is current
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
No extra build option or static specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds3622xsp_42962
Module does not contain platorm information for ds3622xsp_42962

 

EDIT 3 : this works ./rploader.sh build ds3617xs-7.2.0-64561 but don't work for ds3622xsp_42962

Edited June 1, 2023 by extenue

[soulcola]

6 часов назад, extenue сказал:

I don't understand what you mean with "0.9.4.7 webbuilder supersecret feature which is located at tcrp IP address."

while loading to the bootloader, try to go to the IP address of the bootloader via http

[extenue]

all is OK with new 0.9.4.8 , thanks !

[ozef]

Hello,

 

I've changed my hardware and i'm now on an I5 10400 (6c/12t) and on 0.9.4.8 with the ds3622xs i got no Network after booting the bootloader.
When i use DS918+, it works but i don't got the /dev/dri (i got it on my other NAS with i5 6400 on 918+).

 

I can't create a cluster on virtual machine manager neither on my new Nas.

 

Any help / tips ?

Edited June 3, 2023 by ozef

[MrHappy]

I have a vm on proxmox.

Works fine with 7.1 (ds3622xsp) and an old tcrp.

After updating dsm doesn't find my nic (although tcrp-friend does) and no disks are found.

Edited June 3, 2023 by MrHappy

[ozef]

il y a 2 minutes, MrHappy a dit :

I have a vm on proxmox.

Works fine with 7.1 and an old tcrp.

After updating dsm doesn't find my nic (although tcrp-friend does) and no disks are found.

 

Well i'm testing ds3617xs on 7.2 and if i still got some bugs or if i don't have all the CPU Cores, i'll try the ds3622xs+ on 7.1.

[loomes]

1 hour ago, MrHappy said:

I have a vm on proxmox.

Works fine with 7.1 (ds3622xsp) and an old tcrp.

After updating dsm doesn't find my nic (although tcrp-friend does) and no disks are found.

 

Yes i have the same experience with 0.9.4.8, it seems that the virtio Drivers are not loaded.

With 0.9.4.6 all is working fine. I have updatet some Days ago.

 

[esmith504]

On 6/1/2023 at 1:06 PM, soulcola said:

Try 0.9.4.7 webbuilder supersecret feature which is located at tcrp IP address. 

It works for me without errors

Second this. I could not get command line to build for anything (various errors depending on what setting I was changing to attempt to troubleshoot, but NO successful build). Switched to editing the user_config.json via command line but then switching to the new web interface to run the build. Successful build everytime. If I get spare time to go through my logs I'll of file a proper bug report on pocopico's github, but until then, if you're having problems, try the web interface to run any builds.

[ozef]

Il y a 5 heures, esmith504 a dit :

Second this. I could not get command line to build for anything (various errors depending on what setting I was changing to attempt to troubleshoot, but NO successful build). Switched to editing the user_config.json via command line but then switching to the new web interface to run the build. Successful build everytime. If I get spare time to go through my logs I'll of file a proper bug report on pocopico's github, but until then, if you're having problems, try the web interface to run any builds.

Hello,

when you say go through web interface, you mean there is like arpl a web access on TCRP ? If so can you provide the url with the port please ?

[ozef]

Hello,

 

Just tried latest TCRP 0.9.4.8 (updated 1h ago) and DS3622xs+ now working fine !!

Just a question, my USB 3 ports aren't working, any tips ? (worked on 7.1)

Ty pocopico for your work !

Edited June 4, 2023 by ozef

[MrHappy]

13 hours ago, loomes said:

 

Yes i have the same experience with 0.9.4.8, it seems that the virtio Drivers are not loaded.

With 0.9.4.6 all is working fine. I have updatet some Days ago.

 

0.9.4.6 didn't work either.

I created a new vm and on that one it didn't detect the disks either. After changing the scsi to sata they were detected.

Is scsi no longer supported?

 

[djvas335]

3 hours ago, ozef said:

Hello,

when you say go through web interface, you mean there is like arpl a web access on TCRP ? If so can you provide the url with the port please ?

 

Just load the tinycore and go to it's dhcp address no custom port necessary

[MrHappy]

6 hours ago, MrHappy said:

0.9.4.6 didn't work either.

I created a new vm and on that one it didn't detect the disks either. After changing the scsi to sata they were detected.

Is scsi no longer supported?

 

 

SATA gives me errors about unsupported disks...

What config do I need to use for drives (on a vm on Proxmox) to have them discovered and not giving errors?

 

Edited June 4, 2023 by MrHappy

[ozef]

Finally after 2 reboot, ethernet not activated again...on ds3622xs. 

Dunno what's wrong

[Dvalin21]

Is there a full list of all supported devices? I know the following devices support cpus/threads 20 or higher (which is what I'm looking for)

 

FS3600 Intel Xeon D-15671224✓ Broadwellnk DDR4 ECC RDIMM 16GB  (24 threads)

 

HD6500 Intel Xeon Silver 4210R x 21020✓PurleyDDR4 ECC RDIMM 64GB  (20 threads)

 

SA6400 AMD EPYC 72721224✓Epyc7002DDR4 ECC RDIMM 32GB (24 threads)

 

SA3610 Intel Xeon D-15671224✓Broadwellnkv2DDR4 ECC RDIMM 16GB  (24 threads)

 

SA3600 Intel Xeon D-15671224✓BroadwellnkDDR4 ECC RDIMM 16GB (24 threads)

 

Thanks in advance

[Unregistrado]

Tried to update ds3622xs+ to 7.2 using webinterface but doesn't recognize any harddrive connected to HBA card LSI SAS2008.

Tried also the ds3617xs+ same result.

[dusty_dragon]

On 3/11/2022 at 1:40 AM, pocopico said:

 

I think there is no network module for hyper-v network card. Can you pass an lspci -nnq ?

 

Thanks in advance for a great work 

TinyCore RedPill Loader (TCRP)

 

I am also trying to run this on hyper-v (Windows 11) by creating a "tinycore-redpill-uefi.v0.9.4.8.vhdx" file from "tinycore-redpill-uefi.v0.9.4.8.iso"

For my case, Windows 11 hyper-v does not boot from the tinycrore iso image.

 

Since installation media is not usb, the command "sudo ./rploader.sh identifyusb" does not work.

 

After building with "sudo ./rploader.sh build ds3615xs-7.1.0-42661", the system does not work. I think Grub has been lost.

 

Before building - Running from hyper-v ; booted from a disk (not a usb)

 

 

after building - ssh connection is lost:

 

Cannot start VM after building 

 

 cat user_config.json:
 

Quote

{
  "general": {
    "model": "DS3615xs",
    "version": "7.1.0-42661",
    "smallfixnumber": "0",
    "zimghash": "3017542c92232cb5477b0e11d82d708a9909320350b1740aab58359e85f82351",
    "rdhash": "8ee5df65bcfd25c3d1999262153dcff625714d98789bc8065e217773f8d070d8",
    "usb_line": "withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=1 pid=0xa4a5 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=00155D04A908 sn=1130LWN012226 vid=0x0525 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=0A00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=58 ",
    "sata_line": "withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=1 pid=0xa4a5 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=00155D04A908 sn=1130LWN012226 vid=0x0525 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=0A00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=58 ",
    "redpillmake": "prod",
    "friendautoupd": "true",
    "staticboot": "false",
    "hidesensitive": "false"
  },
  "ipsettings": {
    "ipset": "",
    "ipaddr": "",
    "ipgw": "",
    "ipdns": "",
    "ipproxy": ""
  },
  "extra_cmdline": {
    "pid": "0xa4a5",
    "vid": "0x0525",
    "sn": "1130LWN012226",
    "mac1": "00155D04A908",
    "netif_num": "1",
    "SataPortMap": "58",
    "DiskIdxMap": "0A00"
  },
  "synoinfo": {
    "internalportcfg": "0xffff",
    "maxdisks": "16",
    "support_bde_internal_10g": "no",
    "support_disk_compatibility": "no",
    "support_memory_compatibility": "no",
    "maxlanport": "8",
    "netif_seq": "0 1 2 3 4 5 6 7"
  },
  "ramdisk_copy": {}
 

 

[pocopico]

50 minutes ago, dusty_dragon said:

 

Thanks in advance for a great work 

TinyCore RedPill Loader (TCRP)

 

I am also trying to run this on hyper-v (Windows 11) by creating a "tinycore-redpill-uefi.v0.9.4.8.vhdx" file from "tinycore-redpill-uefi.v0.9.4.8.iso"

For my case, Windows 11 hyper-v does not boot from the tinycrore iso image.

 

Since installation media is not usb, the command "sudo ./rploader.sh identifyusb" does not work.

 

After building with "sudo ./rploader.sh build ds3615xs-7.1.0-42661", the system does not work. I think Grub has been lost.

 

Before building - Running from hyper-v ; booted from a disk (not a usb)

 

 

after building - ssh connection is lost:

 

Cannot start VM after building 

 

 cat user_config.json:
 

 

 

We cannot compile the required hyper-v modules, you can try VMware player or VirtualBox for free options