altas Posted February 20, 2022 Share #1076 Posted February 20, 2022 9 hours ago, Orphée said: Yep, ESXi Gen8. so you started the Update process with the 7.0.1 pat file on the running DSM 6.2.3 and switched after the reboot to Tinyloader ? or what was the successfully way? Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 20, 2022 Share #1077 Posted February 20, 2022 Just now, altas said: so you started the Update process with the 7.0.1 pat file on the running DSM 6.2.3 and switched after the reboot to Tinyloader ? or what was the successfully way? Not exactly. I build a 6.2.4 fresh install DS3615xs. I had also a fresh built 7.0.1 DS3622xs+ confirmed as running (just to be sure all settings was OK (sata etc...) I stopped both VMs, I deleted 16GB virtual disk (SATA 1:0) from DS3622xs+ and added/replaced with the 16GB virtual disk from 6.2.4 VM At boot I was "ready to migrate" I gave the 7.0.1 pat file to launch migration, it rebooted as usual, done. 2 Quote Link to comment Share on other sites More sharing options...
altas Posted February 20, 2022 Share #1078 Posted February 20, 2022 so means you bootet the DS3622xs+ VM with the Sata 1:0 from the VM DS3615XS? for Baremetal test.. boot the DS3615xs installation with the DS3622xs Boot Stick and use the 7.0.1 pat file from the loader. Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 20, 2022 Share #1079 Posted February 20, 2022 Yep! Quote Link to comment Share on other sites More sharing options...
altas Posted February 20, 2022 Share #1080 Posted February 20, 2022 cool thx ! so then i can confirm that my Test migration from DS3617xs to DS3622xs+ was successfully (Baremetal) i used 1 HDD with some Test Data and everything was still available. Steps i did 1. block internet to DS3617xs 2 turn off the DS 3 switch the Loader (USB Stick) 4 Boot up and wait until the DS come up and reachable in the Network (ping) 5 use the pat file from the tinyloader and start migration, i used the Option dont keep settings( 2.Option), maybe someone can use NR1 as test 6 wait until the migration process has reached 100%, then the DS should rest as usual, 7 wait until the DS is back online and you can process with DSM7 Wizard to complet. 3 Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 20, 2022 Share #1081 Posted February 20, 2022 I did use option 1 (keep settings) on my ESXi test. and it worked fine. Quote Link to comment Share on other sites More sharing options...
altas Posted February 20, 2022 Share #1082 Posted February 20, 2022 (edited) the remaining challenge is to be sure you have a working tinycore loader befor start migration. and for that you have to play arround with the current working NAS or you have a similar Device. or remove all HDDs from the current Setup and use a empty/clean HDD to prepair the tinyloader and rollback to the working setup with the HDDS to start then the migration process Edited February 20, 2022 by altas Quote Link to comment Share on other sites More sharing options...
recoco Posted February 21, 2022 Share #1083 Posted February 21, 2022 16 hours ago, pocopico said: Is this for bromolow ? 3615xs ?? let me have a look Edit : yes it was pointing to wrong file .. i fixed that now i think Sorry for my missing information. Yes, It's DS3615xs. I'll try it tonight. 1 Quote Link to comment Share on other sites More sharing options...
maxime Posted February 21, 2022 Share #1084 Posted February 21, 2022 11 hours ago, altas said: cool thx ! so then i can confirm that my Test migration from DS3617xs to DS3622xs+ was successfully (Baremetal) i used 1 HDD with some Test Data and everything was still available. Steps i did 1. block internet to DS3617xs 2 turn off the DS 3 switch the Loader (USB Stick) 4 Boot up and wait until the DS come up and reachable in the Network (ping) 5 use the pat file from the tinyloader and start migration, i used the Option dont keep settings( 2.Option), maybe someone can use NR1 as test 6 wait until the migration process has reached 100%, then the DS should rest as usual, 7 wait until the DS is back online and you can process with DSM7 Wizard to complet. Thanks for the info. In case the migration process went wrong, do you think that putting the usb pendrive (with the bootloader of the DS3617xs) back, would be working again? Or could the data have been compromised? Quote Link to comment Share on other sites More sharing options...
altas Posted February 21, 2022 Share #1085 Posted February 21, 2022 That is a good question, i dont know. 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 21, 2022 Author Share #1086 Posted February 21, 2022 (edited) 54 minutes ago, maxime said: Thanks for the info. In case the migration process went wrong, do you think that putting the usb pendrive (with the bootloader of the DS3617xs) back, would be working again? Or could the data have been compromised? The disks are always partitioned with three partitions. The first one holds the DSM installation, the second one is the swap and the third one holds the data. This will happen on all drives. If you reinstall DSM you are messing with the first partition. If you select to keep settings then also most DSM configuration settings will be preserved as well. Data is always untouched. You will have to reinstall DSM but the data will be untouched. Edited February 21, 2022 by pocopico 1 1 Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 21, 2022 Share #1087 Posted February 21, 2022 12 hours ago, altas said: cool thx ! so then i can confirm that my Test migration from DS3617xs to DS3622xs+ was successfully (Baremetal) i used 1 HDD with some Test Data and everything was still available. Steps i did 1. block internet to DS3617xs 2 turn off the DS 3 switch the Loader (USB Stick) 4 Boot up and wait until the DS come up and reachable in the Network (ping) 5 use the pat file from the tinyloader and start migration, i used the Option dont keep settings( 2.Option), maybe someone can use NR1 as test 6 wait until the migration process has reached 100%, then the DS should rest as usual, 7 wait until the DS is back online and you can process with DSM7 Wizard to complet. Good to know. Do you know what happens with pkg that doesn't exist in DSM7 but only in DSM6? I have Ts3serve on my Gen8 DSM6.2.3 DS3617xs, but i don't know what could happen with package installed when i will migrate. Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 21, 2022 Author Share #1088 Posted February 21, 2022 8 minutes ago, Aigor said: Good to know. Do you know what happens with pkg that doesn't exist in DSM7 but only in DSM6? I have Ts3serve on my Gen8 DSM6.2.3 DS3617xs, but i don't know what could happen with package installed when i will migrate. On original synology, you get a warning during upgrade for all packages that dont exist and/or not supported. Data for this application will still be on your data drives but if the app is not supported it will not be installed. 2 Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 21, 2022 Share #1089 Posted February 21, 2022 Just now, pocopico said: On original synology, you get a warning during upgrade for all packages that dont exist and/or not supported. Data for this application will still be on your data drives but if the app is not supported it will not be installed. But package still remain or will be deleted? Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 21, 2022 Author Share #1090 Posted February 21, 2022 1 minute ago, Aigor said: But package still remain or will be deleted? Depends. Some applications are on the data drive and some on the DSM drive. 1 Quote Link to comment Share on other sites More sharing options...
maxime Posted February 21, 2022 Share #1091 Posted February 21, 2022 Please, can you tell me if is there a guide for using redpill extensions? I see the pocopico made a very interest repo, but I don't understand how to use the extensions 🙄 Quote Link to comment Share on other sites More sharing options...
altas Posted February 21, 2022 Share #1092 Posted February 21, 2022 I think it will be deleted.Let my check if i can go back to Dsm6 to do a test 1 Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 21, 2022 Share #1093 Posted February 21, 2022 It will be "incompatible" and not running, you will only be able to uninstall it. 1 Quote Link to comment Share on other sites More sharing options...
recoco Posted February 21, 2022 Share #1094 Posted February 21, 2022 7 hours ago, recoco said: Sorry for my missing information. Yes, It's DS3615xs. I'll try it tonight. HPSA ext module works great. Thank you very much! @pocopico 1 Quote Link to comment Share on other sites More sharing options...
altas Posted February 21, 2022 Share #1095 Posted February 21, 2022 4 hours ago, Aigor said: Good to know. Do you know what happens with pkg that doesn't exist in DSM7 but only in DSM6? I have Ts3serve on my Gen8 DSM6.2.3 DS3617xs, but i don't know what could happen with package installed when i will migrate. from where you have the TS3 Server?? as i can not find it in the Package Center Quote Link to comment Share on other sites More sharing options...
MSXGames Posted February 21, 2022 Share #1096 Posted February 21, 2022 18 minutes ago, altas said: from where you have the TS3 Server?? as i can not find it in the Package Center You can install it in a docker application. Search for teamspeak If it is still updatet, you can use the latest one. Kind regards After installation ---> First of all set the environment variable: TS3SERVER_LICENSE => accept and map a directory to "/var/ts3server/" in the Volume tab, for example: docker/ts3_data => /var/ts3server/ ps: I do not know if things has changed, I do not use it anymore. Quote Link to comment Share on other sites More sharing options...
altas Posted February 21, 2022 Share #1097 Posted February 21, 2022 i was asking Aigor to test the migration from existing DSM6 with TS3 server to DSM7.. Quote Link to comment Share on other sites More sharing options...
altas Posted February 21, 2022 Share #1098 Posted February 21, 2022 but for that i need the source of the TS3 PAckage Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 21, 2022 Share #1099 Posted February 21, 2022 29 minutes ago, MSXGames said: You can install it in a docker application. Search for teamspeak If it is still updatet, you can use the latest one. Kind regards After installation ---> First of all set the environment variable: TS3SERVER_LICENSE => accept and map a directory to "/var/ts3server/" in the Volume tab, for example: docker/ts3_data => /var/ts3server/ ps: I do not know if things has changed, I do not use it anymore. I would like to build my own spk starting from already exist. I have already tested a "workaround" make tar of ts3 folder from dsm 6.3 system, untar on new system. in this way you lost ability to start and stop via panel, but application runs well Thanks for advice 1 Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 21, 2022 Share #1100 Posted February 21, 2022 (edited) 13 minutes ago, altas said: but for that i need the source of the TS3 PAckage Nope, there is a demo in a spksrc tree that not involves the use of sources spksrc is a framework to help to build package for synology, it offers a environment on which you can build packages for many arhch with one command https://github.com/SynoCommunity/spksrc EDIT: i would like to try to port fog project into synology, is there someone interested in helping? https://fogproject.org/ Thanks Edited February 21, 2022 by Aigor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.