Jump to content
XPEnology Community

TinyCore RedPill Loader (TCRP)

pocopico

By pocopico
in Loaders

 Share

Recommended Posts

cferra Advanced Member

cferra

Posted
Posted

@pocopico ssh output for clarity

 

root@box:/home/tc# lspci -nnq
00:00.0 Host bridge [0600]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 [8086:6f00] (rev 01)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 [8086:6f02] (rev 01)
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 [8086:6f03] (rev 01)
00:02.0 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 [8086:6f04] (rev 01)
00:02.2 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 [8086:6f06] (rev 01)
00:03.0 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 [8086:6f08] (rev 01)
00:03.2 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 [8086:6f0a] (rev 01)
00:04.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 0 [8086:6f20] (rev 01)
00:04.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 1 [8086:6f21] (rev 01)
00:04.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 2 [8086:6f22] (rev 01)
00:04.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 3 [8086:6f23] (rev 01)
00:04.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 4 [8086:6f24] (rev 01)
00:04.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 5 [8086:6f25] (rev 01)
00:04.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 6 [8086:6f26] (rev 01)
00:04.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 7 [8086:6f27] (rev 01)
00:05.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management [8086:6f28] (rev 01)
00:05.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug [8086:6f29] (rev 01)
00:05.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors [8086:6f2a] (rev 01)
00:05.4 PIC [0800]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC [8086:6f2c] (rev 01)
00:11.0 Unassigned class [ff00]: Intel Corporation C610/X99 series chipset SPSR [8086:8d7c] (rev 05)
00:11.4 SATA controller [0106]: Intel Corporation C610/X99 series chipset sSATA Controller [AHCI mode] [8086:8d62] (rev 05)
00:14.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB xHCI Host Controller [8086:8d31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation C610/X99 series chipset MEI Controller #1 [8086:8d3a] (rev 05)
00:16.1 Communication controller [0780]: Intel Corporation C610/X99 series chipset MEI Controller #2 [8086:8d3b] (rev 05)
00:1a.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 [8086:8d2d] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #1 [8086:8d10] (rev d5)
00:1c.4 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #5 [8086:8d18] (rev d5)
00:1c.5 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #6 [8086:8d1a] (rev d5)
00:1c.6 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #7 [8086:8d1c] (rev d5)
00:1d.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #1 [8086:8d26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation C610/X99 series chipset LPC Controller [8086:8d44] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation C610/X99 series chipset 6-Port SATA Controller [AHCI mode] [8086:8d02] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation C610/X99 series chipset SMBus Controller [8086:8d22] (rev 05)
01:00.0 Ethernet controller [0200]: Mellanox Technologies MT27500 Family [ConnectX-3] [15b3:1003]
04:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01)
08:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
09:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
0a:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 03)
0b:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 30)
ff:0b.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f81] (rev 01)
ff:0b.1 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f36] (rev 01)
ff:0b.2 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f37] (rev 01)
ff:0b.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link Debug [8086:6f76] (rev 01)
ff:0c.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe0] (rev 01)
ff:0c.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe1] (rev 01)
ff:0c.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe2] (rev 01)
ff:0c.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe3] (rev 01)
ff:0c.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe4] (rev 01)
ff:0c.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe5] (rev 01)
ff:0f.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ff8] (rev 01)
ff:0f.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ff9] (rev 01)
ff:0f.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ffc] (rev 01)
ff:0f.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ffd] (rev 01)
ff:0f.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ffe] (rev 01)
ff:10.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent [8086:6f1d] (rev 01)
ff:10.1 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent [8086:6f34] (rev 01)
ff:10.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f1e] (rev 01)
ff:10.6 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f7d] (rev 01)
ff:10.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f1f] (rev 01)
ff:12.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 [8086:6fa0] (rev 01)
ff:12.1 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 [8086:6f30] (rev 01)
ff:13.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS [8086:6fa8] (rev 01)
ff:13.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS [8086:6f71] (rev 01)
ff:13.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6faa] (rev 01)
ff:13.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fab] (rev 01)
ff:13.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fac] (rev 01)
ff:13.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fad] (rev 01)
ff:13.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Broadcast [8086:6fae] (rev 01)
ff:13.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast [8086:6faf] (rev 01)
ff:14.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control [8086:6fb0] (rev 01)
ff:14.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control [8086:6fb1] (rev 01)
ff:14.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error [8086:6fb2] (rev 01)
ff:14.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error [8086:6fb3] (rev 01)
ff:14.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbc] (rev 01)
ff:14.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbd] (rev 01)
ff:14.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbe] (rev 01)
ff:14.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbf] (rev 01)
ff:15.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control [8086:6fb4] (rev 01)
ff:15.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control [8086:6fb5] (rev 01)
ff:15.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error [8086:6fb6] (rev 01)
ff:15.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error [8086:6fb7] (rev 01)
ff:16.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Target Address/Thermal/RAS [8086:6f68] (rev 01)
ff:16.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Broadcast [8086:6f6e] (rev 01)
ff:16.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast [8086:6f6f] (rev 01)
ff:17.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 1 - Channel 0 Thermal Control [8086:6fd0] (rev 01)
ff:17.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fb8] (rev 01)
ff:17.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fb9] (rev 01)
ff:17.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fba] (rev 01)
ff:17.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fbb] (rev 01)
ff:1e.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f98] (rev 01)
ff:1e.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f99] (rev 01)
ff:1e.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9a] (rev 01)
ff:1e.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6fc0] (rev 01)
ff:1e.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9c] (rev 01)
ff:1f.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f88] (rev 01)
ff:1f.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f8a] (rev 01)
 

Link to comment
Share on other sites
GeriHDHUN Junior Member

GeriHDHUN

Posted
Posted
1 hour ago, GeriHDHUN said:

Now the serial number generator work perfectly but : 
"An error occurred Errors were detected on the hard disks (1, 2, 4) and the SATA ports were disabled.  Shut down the DS918 +, replace or remove the hard drives, and try again."
Any idea?
image.thumb.png.68862bd4b56ac0f4f0133974c0de388d.png

 

*ASUS Z97 PRO GAMER motherboard with 6 sata

 I7 4790k processor

Sitemap linked

IMG_20220215_231214.jpg

Link to comment
Share on other sites
rootz159 Newbie

rootz159

Posted
Posted (edited)

Hi,

I am able to boot OS, but I'm currently stuck at Installing DSM ("Failed to install DSM" at 55%) using .pat file that has been generated during build. In the synoupdate.log I can see below error. I've tried multiple build versions and models (DS918+ and DS3615xs). Did somebody encountered same issue and was able to fix it? I'm running it as VM on pve node (VM config is below as well).

 

Thank you

Error: 

2022/02/15 22:17:42     Start of the update...
2022/02/15 22:17:42     Upgrade from version 7.0.41890 to version 7.0.41890
2022/02/15 22:17:42     Failed to accomplish the update! (errno = 21)

 

VM config: 

args: -drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/118/tinycore-redpill.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'
boot: order=net0
cores: 2
cpu: host
machine: q35
memory: 2048
meta: creation-qemu=6.1.1,ctime=1644960646
name: dsm
net0: virtio=7A:12:BB:4F:E1:9D,bridge=vmbr0
numa: 0
onboot: 0
ostype: l26
sata0: local-lvm:vm-118-disk-0,discard=on,size=100G,ssd=1
serial0: socket
serial1: socket
smbios1: uuid=c1acfaca-e74f-4fbc-97ae-09a2096d4d29
sockets: 1
tablet: 1
vmgenid: 3d446487-9628-46bb-a920-ebe3663e6044

 

GUI error:

chrome_18NZoQiNXN.thumb.png.559b1185dadbb3673b5ab99ed030cc0f.png

 

 

EDIT: I changed boot option to USB and it's working now. Maybe this can help somebody else as well.

Edited by rootz159
Link to comment
Share on other sites
Orphée Guru Master

Orphée

Posted
Posted (edited)

Running as VM on HP Gen8 ESXi :

 

image.thumb.png.fcd29b508619c6da94ca4a6b4af99930.png

 

Well played @pocopico

 

I did not try to fix/edit the disk DB file yet :

image.thumb.png.883610f88e8422d51f8be8cce0c74b27.png

 

Please do the same with DVA3221 ;)

 

Edit : added the following text in front of the first char of /var/lib/disk-compatibility/ds3622xs+_host_v7.db

{"model":"VMware Virtual SATA Hard Drive","firmware”:”0001”,”rec_intvl”:[1]},

 

image.thumb.png.5fc9eee050f55d7313b61025fb342586.png

 

image.thumb.png.a21a19caff175864f91b00393043e8b0.png

image.thumb.png.e5a070e1f597a0e457aada324c5c99cc.png

 

And It seems the VM is stuck when you try to shutdown DSM (must kill force VM shutdown)

 

Edited by Orphée
  • Like 1
  • Thanks 1
Link to comment
Share on other sites
Dvalin21 Super Member

Dvalin21

Posted
Posted (edited)

@pocopico Just updated to 4.5 and will be trying it on the same system. I mentioned before, when trying to install 7 it would not create synoboot 1-3 or synobios. Thanks for the sacrifice and work that you do for this.

 

Update: Getting the same error when trying to install DS3617xs

 

DiskStation> tail -f /var/log/messages
Jan  1 00:13:01 kernel: [  950.085431] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:01 kernel: [  950.099030] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:01 kernel: [  950.107798] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:01 kernel: [  950.121397] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:01 kernel: [  950.134144] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:01 kernel: [  950.147741] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:01 kernel: [  950.156509] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:01 kernel: [  950.170109] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:01 kernel: [  950.182823] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:01 kernel: [  950.196426] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:09 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk'
Jan  1 00:13:09 kernel: [  957.968038] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:09 kernel: [  958.346081] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:09 synoupgrade: autocleanup/mount.c:27 mount's exit status is zero
Jan  1 00:13:09 synoupgrade: get_disk_dsm_version.c:99 try reading disk dsm's version at file '/_disk//etc.defaults/VERSION' of key 'buildnumber'
Jan  1 00:13:09 synoupgrade: get_disk_dsm_version.c:76 failed to load key 'buildnumber' from /_disk/etc.defaults/VERSION
Jan  1 00:13:09 synoupgrade: get_disk_dsm_version.c:104 failed to read dsm version on '/_disk'
Jan  1 00:13:09 synoupgrade: autocleanup/mount.c:44 run '/usr/bin/umount -l /_disk'
Jan  1 00:13:09 synoupgrade: autocleanup/mount.c:54 umount's exit status is zero
Jan  1 00:13:09 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0
Jan  1 00:13:09 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device
Jan  1 00:13:09 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version
Jan  1 00:13:10 kernel: [  959.059122] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:10 kernel: [  959.072740] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:10 kernel: [  959.086517] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:10 kernel: [  959.100127] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:10 kernel: [  959.108912] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:10 kernel: [  959.122543] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:10 kernel: [  959.135338] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:10 kernel: [  959.148952] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:10 kernel: [  959.157741] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:10 kernel: [  959.171339] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:10 kernel: [  959.184113] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:10 kernel: [  959.197711] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:18 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk'
Jan  1 00:13:18 kernel: [  966.979952] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:18 synoupgrade: autocleanup/mount.c:27 mount's exit status is zero
Jan  1 00:13:18 synoupgrade: get_disk_dsm_version.c:99 try reading disk dsm's version at file '/_disk//etc.defaults/VERSION' of key 'buildnumber'
Jan  1 00:13:18 kernel: [  967.369122] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:18 synoupgrade: get_disk_dsm_version.c:76 failed to load key 'buildnumber' from /_disk/etc.defaults/VERSION
Jan  1 00:13:18 synoupgrade: get_disk_dsm_version.c:104 failed to read dsm version on '/_disk'
Jan  1 00:13:18 synoupgrade: autocleanup/mount.c:44 run '/usr/bin/umount -l /_disk'
Jan  1 00:13:18 synoupgrade: autocleanup/mount.c:54 umount's exit status is zero
Jan  1 00:13:18 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0
Jan  1 00:13:18 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device
Jan  1 00:13:18 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version
Jan  1 00:13:19 kernel: [  968.014880] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:19 kernel: [  968.028491] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:19 kernel: [  968.042270] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:19 kernel: [  968.055874] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:19 kernel: [  968.064656] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:19 kernel: [  968.078254] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:19 kernel: [  968.090965] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:19 kernel: [  968.104566] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:19 kernel: [  968.113331] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:19 kernel: [  968.126928] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:19 kernel: [  968.139622] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:19 kernel: [  968.153219] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:27 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk'
Jan  1 00:13:27 kernel: [  975.691860] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:27 synoupgrade: autocleanup/mount.c:27 mount's exit status is zero
Jan  1 00:13:27 synoupgrade: get_disk_dsm_version.c:99 try reading disk dsm's version at file '/_disk//etc.defaults/VERSION' of key 'buildnumber'
Jan  1 00:13:27 kernel: [  976.058776] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:27 synoupgrade: get_disk_dsm_version.c:76 failed to load key 'buildnumber' from /_disk/etc.defaults/VERSION
Jan  1 00:13:27 synoupgrade: get_disk_dsm_version.c:104 failed to read dsm version on '/_disk'
Jan  1 00:13:27 synoupgrade: autocleanup/mount.c:44 run '/usr/bin/umount -l /_disk'
Jan  1 00:13:27 synoupgrade: autocleanup/mount.c:54 umount's exit status is zero
Jan  1 00:13:27 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0
Jan  1 00:13:27 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device
Jan  1 00:13:27 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version
Jan  1 00:13:28 kernel: [  976.693758] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:28 kernel: [  976.707355] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:28 kernel: [  976.721264] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:28 kernel: [  976.734863] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:28 kernel: [  976.743623] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:28 kernel: [  976.757225] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:28 kernel: [  976.770122] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:28 kernel: [  976.783718] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:28 kernel: [  976.792478] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:28 kernel: [  976.806082] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:28 kernel: [  976.818954] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:13:28 kernel: [  976.832551] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:13:28 install.cgi: install.c:520 Unknown param localinstallreq=false
Jan  1 00:13:28 install.cgi: install.c:520 Unknown param _dc=1644985699910
Jan  1 00:13:28 install.cgi: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8
Jan  1 00:13:28 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot
Jan  1 00:13:28 kernel: [  976.958649] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:28 kernel: [  977.008519] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:28 install.cgi: ninstaller.c:152 umount partition /tmpRoot
Jan  1 00:13:28 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot
Jan  1 00:13:28 kernel: [  977.215687] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:28 kernel: [  977.236672] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:28 install.cgi: ninstaller.c:152 umount partition /tmpRoot
Jan  1 00:13:28 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot
Jan  1 00:13:28 kernel: [  977.344056] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:28 install.cgi: ninstaller.c:430 failed to get upnpmodelname from [/tmpRoot/etc.defaults/synoinfo.conf].
Jan  1 00:13:28 install.cgi: ninstaller.c:437 failed to get buildnumber from [/tmpRoot/etc.defaults/VERSION].
Jan  1 00:13:28 install.cgi: ninstaller.c:444 failed to get productversion from [/tmpRoot/etc.defaults/VERSION].
Jan  1 00:13:28 install.cgi: ninstaller.c:446 failed to get majorversion from [/tmpRoot/etc.defaults/VERSION].
Jan  1 00:13:28 install.cgi: ninstaller.c:449 failed to get minorversion from [/tmpRoot/etc.defaults/VERSION].
Jan  1 00:13:28 install.cgi: lib/system/system_platform_get.c:35 failed to get unique from /tmpRoot/etc.defaults/synoinfo.conf errno=[0x0900 file_get_key_value.c:28]
Jan  1 00:13:28 install.cgi: ninstaller.c:461 failed to get platform from [/tmpRoot/etc.defaults/synoinfo.conf].
Jan  1 00:13:28 install.cgi: lib/system/system_max_align_get.c:86 [/tmpRoot/.system_info/pgsql_alignment] doesn't exist, check model name for alignment
Jan  1 00:13:28 install.cgi: lib/system/system_endian_get.c:61 [/tmpRoot/.system_info/endian] doesn't exist, check model name for endian
Jan  1 00:13:28 install.cgi: lib/system/system_bit_get.c:57 [/tmpRoot/.system_info/bits] doesn't exist, check model name for bits
Jan  1 00:13:28 install.cgi: ninstaller.c:494 fail to get admin port from /tmpRoot/etc/synoinfo.conf... try another way
Jan  1 00:13:28 install.cgi: ninstaller.c:374 /tmpRoot/usr/syno/etc/www/DSM.json not exist
Jan  1 00:13:28 install.cgi: ninstaller.c:497 fail to get admin port from /tmpRoot/usr/syno/etc/www/DSM.json
Jan  1 00:13:28 kernel: [  977.363545] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:28 install.cgi: ninstaller.c:525 failed to get nvr key from [/tmpRoot/etc.defaults/synoinfo.conf].
Jan  1 00:13:28 install.cgi: root_block_get.c:42 Failed to get op info for [/dev/md][0x0900 root_block_op_info_get.c:78]
Jan  1 00:13:28 install.cgi: root_block_get.c:123 Failed to read root block from [/dev/md][0x0900 root_block_op_info_get.c:78]
Jan  1 00:13:28 install.cgi: ninstaller.c:748 fail to read [unique] from [/tmpRoot//etc.defaults/synoinfo.conf]
Jan  1 00:13:28 install.cgi: ninstaller.c:847 unique not match
Jan  1 00:13:28 install.cgi: ninstaller.c:1207 SYSTEM_NORMAL, [Recoverable=0]
Jan  1 00:13:28 install.cgi: ninstaller.c:152 umount partition /tmpRoot
Jan  1 00:13:28 install.cgi: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 
Jan  1 00:13:28 install.cgi: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData 
Jan  1 00:13:28 install.cgi: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 1, gblCreateDataVol: 0, gblSystemRecoverable: 0
Jan  1 00:13:28 install.cgi: synoupgrade.c:762 system status = 2
Jan  1 00:13:28 install.cgi: ninstaller.c:1648 CreateDataVol=[0]
Jan  1 00:13:28 install.cgi: ninstaller.c:152 umount partition /tmpData
Jan  1 00:13:28 install.cgi: ninstaller.c:156 Fail to execute [/bin/umount -f /tmpData > /dev/null 2>&1]
Jan  1 00:13:28 install.cgi: ninstaller.c:1660 installer cmd=[/usr/syno/sbin/installer.sh -r   >> /tmp/installer_sh.log 2>&1]
Jan 1 00:13:28 burnin: B1 not started
Jan  1 00:13:28 syno_swap_ctl: swap/swap_off.c:20 swap/swap_off.c(20): failed to swapoff /dev/md1, ret = -1
Jan  1 00:13:28 kernel: [  977.514778] md0: detected capacity change from 2549940224 to 0
Jan  1 00:13:28 kernel: [  977.521301] md: md0: set sdc1 to auto_remap [0]
Jan  1 00:13:28 kernel: [  977.526355] md: md0: set sdb1 to auto_remap [0]
Jan  1 00:13:28 kernel: [  977.531413] md: md0: set sda1 to auto_remap [0]
Jan  1 00:13:28 kernel: [  977.536473] md: md0 stopped.
Jan  1 00:13:28 kernel: [  977.539697] md: unbind<sdc1>
Jan  1 00:13:28 kernel: [  977.547704] md: export_rdev(sdc1)
Jan  1 00:13:28 kernel: [  977.551416] md: unbind<sdb1>
Jan  1 00:13:29 kernel: [  977.559702] md: export_rdev(sdb1)
Jan  1 00:13:29 kernel: [  977.563403] md: unbind<sda1>
Jan  1 00:13:29 kernel: [  977.570704] md: export_rdev(sda1)
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm -S /dev/md0" Error="mdadm: stopped /dev/md0 "
Jan  1 00:13:29 raidtool: raid_internal_lib.c:158 [Info] clean RAID superblock of /dev/md0
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not name, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: name
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram0
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram1
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram2
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram3
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram4
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram5
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram6
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram7
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram8
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram9
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram10
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram11
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram12
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram13
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram14
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram15
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: md1
Jan  1 00:13:29 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm --zero-superblock /dev/sda1" Error=""
Jan  1 00:13:29 raidtool: raid_internal_lib.c:90 [Info] Clean RAID superblock on '/dev/sda1'
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm --zero-superblock /dev/sdc1" Error=""
Jan  1 00:13:29 raidtool: raid_internal_lib.c:90 [Info] Clean RAID superblock on '/dev/sdc1'
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm --zero-superblock /dev/sdb1" Error=""
Jan  1 00:13:29 raidtool: raid_internal_lib.c:90 [Info] Clean RAID superblock on '/dev/sdb1'
Jan  1 00:13:29 kernel: [  977.805457] md1: detected capacity change from 2147418112 to 0
Jan  1 00:13:29 kernel: [  977.811980] md: md1: set sdc2 to auto_remap [0]
Jan  1 00:13:29 kernel: [  977.817041] md: md1: set sdb2 to auto_remap [0]
Jan  1 00:13:29 kernel: [  977.822098] md: md1: set sda2 to auto_remap [0]
Jan  1 00:13:29 kernel: [  977.827156] md: md1 stopped.
Jan  1 00:13:29 kernel: [  977.830379] md: unbind<sdc2>
Jan  1 00:13:29 kernel: [  977.837720] md: export_rdev(sdc2)
Jan  1 00:13:29 kernel: [  977.841465] md: unbind<sdb2>
Jan  1 00:13:29 kernel: [  977.850730] md: export_rdev(sdb2)
Jan  1 00:13:29 kernel: [  977.854479] md: unbind<sda2>
Jan  1 00:13:29 kernel: [  977.861723] md: export_rdev(sda2)
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm -S /dev/md1" Error="mdadm: stopped /dev/md1 "
Jan  1 00:13:29 raidtool: raid_internal_lib.c:158 [Info] clean RAID superblock of /dev/md1
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not name, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: name
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram0
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram1
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram2
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram3
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram4
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram5
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram6
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram7
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram8
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram9
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram10
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram11
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram12
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram13
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram14
Jan  1 00:13:29 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not ram, not match any port type
Jan  1 00:13:29 raidtool: disk/disk_port_to_container.c:38 Unknown diskType
Jan  1 00:13:29 raidtool: partition_path_enum.c:29 Failed to parsing device: ram15
Jan  1 00:13:29 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdc" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdb" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdb" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdb" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdc" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdc" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdb" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdb" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdc" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sda" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdc" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sda" Error=""
Jan  1 00:13:29 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sda" Error=""
Jan  1 00:13:32 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:32 kernel: [  981.503852] md: bind<sda1>
Jan  1 00:13:32 kernel: [  981.507076] md: bind<sdb1>
Jan  1 00:13:32 kernel: [  981.518195] md: bind<sdc1>
Jan  1 00:13:32 kernel: [  981.521624] md/raid1:md0: active with 3 out of 8 mirrors
Jan  1 00:13:32 kernel: [  981.537312] md0: detected capacity change from 0 to 2549940224
Jan  1 00:13:32 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:35 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:36 kernel: [  984.728162] md: bind<sda2>
Jan  1 00:13:36 kernel: [  984.731383] md: bind<sdb2>
Jan  1 00:13:36 kernel: [  984.741606] md: bind<sdc2>
Jan  1 00:13:36 kernel: [  984.745039] md/raid1:md1: active with 3 out of 8 mirrors
Jan  1 00:13:36 raidtool: raidtool.c:716 system inited on [/dev/sda1 /dev/sdb1 /dev/sdc1 ], [/dev/sda2 /dev/sdb2 /dev/sdc2 ]
Jan  1 00:13:36 kernel: [  984.761599] md1: detected capacity change from 0 to 2147418112
Jan  1 00:13:36 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type
Jan  1 00:13:37 kernel: [  985.930951] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:37 kernel: [  985.981951] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:37 kernel: [  986.272486] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
Jan  1 00:13:37 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot
Jan  1 00:13:37 install.cgi: ninstaller.c:152 umount partition /tmpRoot
Jan  1 00:13:37 kernel: [  986.422498] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={72} ascii="r"
Jan  1 00:13:37 kernel: [  986.430247] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:37 kernel: [  986.439797] <redpill/pmu_shim.c:239> Executing cmd OUT_SCHED_UP_OFF handler cmd_shim_noop+0x0/0x30 [redpill]
Jan  1 00:13:37 kernel: [  986.450767] <redpill/pmu_shim.c:45> vPMU received OUT_SCHED_UP_OFF using 1 bytes - NOOP
Jan  1 00:13:37 kernel: [  986.451737] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:13:37 install.cgi: ninstaller.c:1688 retv=[0]
Jan  1 00:13:37 install.cgi: ninstaller.c:1689(ErrFHOSTDoFdiskFormat) retv=[0]
Jan  1 00:13:37 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpData
Jan  1 00:13:37 kernel: [  986.501952] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:13:37 kernel: [  986.518099] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:14:04 install.cgi: synoupgrade.c:1342 Extracting VERSION from Old Patch Format [/tmpData/@autoupdate/upload.pat][/tmpData/@autoupdate]
Jan  1 00:14:04 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1]
Jan  1 00:14:04 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1]
Jan  1 00:14:04 install.cgi: ninstaller.c:1299 Extracting Old Patch Format [/tmpData/upd@te.pat][/tmpData/upd@te]
Jan  1 00:14:04 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1]
Jan  1 00:14:05 install.cgi: Verify codesign of [/tmpData/upd@te]...
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (VERSION) = 203356db192da8fc8bdaa07c8d686015a180335bf421f23d28e292b005edfc95
Jan  1 00:14:05 synocodesign: VERSION: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (zImage) = d2e79414c36a0ab381fd90e90d4dfabc319ec42bd54bcaf0adb4fed1172ff710
Jan  1 00:14:05 synocodesign: zImage: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (updater) = 2662445df06ff0d9133443eb7ebb317b229c2837ec54890fb866c78e1a26b557
Jan  1 00:14:05 synocodesign: updater: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (GRUB_VER) = af53c18c98c56e4578ba5a6e3c25a3d9d42c438a6513304f0b569cb9c45e1fd4
Jan  1 00:14:05 synocodesign: GRUB_VER: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (rd.gz) = 8849c44752103407934cd14d75701e1f8d9efd2b43b2425c1e8dd3336070cf72
Jan  1 00:14:05 synocodesign: rd.gz: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (grub_cksum.syno) = 552e873beb95d4a7e98a6bdf4a02d0693f8a97712d5ad04f0267585207ed21b2
Jan  1 00:14:05 synocodesign: grub_cksum.syno: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (H2OFFT-Lx64) = db2e5deef20319e90f7f3e16a3f8ea8d163682daacca20dd739628064e7bdf1e
Jan  1 00:14:05 synocodesign: H2OFFT-Lx64: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (bios.ROM) = 2dca33e99a1e60b1ad60a780f38518ae72f23fa02be6fbcd5559428af28f7565
Jan  1 00:14:05 synocodesign: bios.ROM: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (platform.ini) = 77fbbefa935203c3aa3227928703e126ab7d8aee4ccd3d1819a4ebd49d6ed7ff
Jan  1 00:14:05 synocodesign: platform.ini: OK
Jan  1 00:14:05 synocodesign: BLAKE2b-256 (SynoBootLoader.conf) = 4255ebcfe658dae76a3c04c6cdee2f6fc6cac5ecae5fb4467f786d6194abd949
Jan  1 00:14:05 synocodesign: SynoBootLoader.conf: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (hda1.tgz) = e56ffd7d0acb398b9c3088fc9ab77040b8671e74ea4ee1ecf3d6ce1f89d530b6
Jan  1 00:14:06 synocodesign: hda1.tgz: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (indexdb.txz) = 763bfa7a65ed0c330f5acff3bb12cf71745277e2195bbd78b667d780d76d283e
Jan  1 00:14:06 synocodesign: indexdb.txz: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (synohdpack_img.txz) = 8d03e5297bcb1587085e6a6bdf3e1508b990423ee77b9454a8806b68c05f4c58
Jan  1 00:14:06 synocodesign: synohdpack_img.txz: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/dsm6-ui-compatible-1.0.0-0090.spk) = 21f0ebcd955a0b7ddef976668c8bbcddc680e4cd0a08c051cc8eef81eb618520
Jan  1 00:14:06 synocodesign: packages/dsm6-ui-compatible-1.0.0-0090.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/USBCopy-x86_64-2.2.0-1076.spk) = 43d5accb1e160e73c261e2ee7e929816466141c00701c2217153c422194594d6
Jan  1 00:14:06 synocodesign: packages/USBCopy-x86_64-2.2.0-1076.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk) = d6a26cb39703f18248532a77598bfafa0c5c6a1af8f1bd21c3544a17bd65a366
Jan  1 00:14:06 synocodesign: packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/SecureSignIn-x86_64-1.0.3-0138.spk) = 1cbc1d2c29bd41c177462713beed98a194c903100c19acb611d34f26fdbb63e3
Jan  1 00:14:06 synocodesign: packages/SecureSignIn-x86_64-1.0.3-0138.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/ScsiTarget-x86_64-1.0.2-0207.spk) = cfcc18e7080d14ac49b0cc1d3b400765a3b52cdcb2852abb649b1cb25f10410d
Jan  1 00:14:06 synocodesign: packages/ScsiTarget-x86_64-1.0.2-0207.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/SMBService-x86_64-4.10.18-0316.spk) = 415d75a8b0317a6dee0142aaedc084efe4da80bd39f71520adf671972da1ea56
Jan  1 00:14:06 synocodesign: packages/SMBService-x86_64-4.10.18-0316.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/Python2-x86_64-2.7.18-1004.spk) = a081dba0d92d460b9828b50e3848bb09834d0cf46b6ece19721965c3b013b819
Jan  1 00:14:06 synocodesign: packages/Python2-x86_64-2.7.18-1004.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/OAuthService-x86_64-1.1.2-0071.spk) = d2c1a75b441827a159dd1662ef4deaf980f08850c16803bc2b0c997a3e82b167
Jan  1 00:14:06 synocodesign: packages/OAuthService-x86_64-1.1.2-0071.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/HybridShare-broadwell-1.2.0-0650.spk) = 7a3d8f4a45720acfa094873da801ae41cfbe6b67ee74b538aa8820b810c7442a
Jan  1 00:14:06 synocodesign: packages/HybridShare-broadwell-1.2.0-0650.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/HighAvailability-x86_64-2.1.1-1279.spk) = 923bd2d1896fa6b5b0707a5363589c41c3f5574f83e1fb82aa5aae406030f2c7
Jan  1 00:14:06 synocodesign: packages/HighAvailability-x86_64-2.1.1-1279.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/FileStation-x86_64-1.3.1-1382.spk) = ae14221440cbbb1eccd348e7adf00c2daf85a18e5759390a32a634700fb1faf7
Jan  1 00:14:06 synocodesign: packages/FileStation-x86_64-1.3.1-1382.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/DhcpServer-x86_64-1.0.0-0034.spk) = 19369e16d3653d2adfd3054ecdf195e2f70a7081a7ae67469cb7e5f14e2e93f8
Jan  1 00:14:06 synocodesign: packages/DhcpServer-x86_64-1.0.0-0034.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (packages/ActiveInsight-x86_64-1.1.0-1121.spk) = e3cd03d10840bec796f1d73757c68c81f09710ba94a7fd6745ed3132cb30a3b6
Jan  1 00:14:06 synocodesign: packages/ActiveInsight-x86_64-1.1.0-1121.spk: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/chs/strings) = daaeffe8730f3b64dc5ff3012022d00ff9eccae6498fcc29b50b567db8214755
Jan  1 00:14:06 synocodesign: texts/chs/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/cht/strings) = 8bf545442dffdb3653fbbfc6c1a760cec6895e3c09ba1922c60d776de5f7f965
Jan  1 00:14:06 synocodesign: texts/cht/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/csy/strings) = 414b7446d4271621bb6a62ef756bc29be82881adc1bd8d3ba857e55271fc5d64
Jan  1 00:14:06 synocodesign: texts/csy/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/dan/strings) = 7875012a44709e6e96df56c634adce2b79fc399f655475f91acaeab00f03a39f
Jan  1 00:14:06 synocodesign: texts/dan/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/enu/strings) = 0bb2656537d29ca293dfb89a9b646802e4ab2df7897b7eac69984cf048b52e9c
Jan  1 00:14:06 synocodesign: texts/enu/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/fre/strings) = 4225e913f64e806446c4311ae204814bd381bdd743a95dd1619e8bf6705a6024
Jan  1 00:14:06 synocodesign: texts/fre/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/ger/strings) = 466d3092e6bca364bb9fb12c2b1f85e3c2fd66a9b5d2095ca21e247b97ea9388
Jan  1 00:14:06 synocodesign: texts/ger/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/hun/strings) = 49bdaf196a4a3ef23c6db88a7082770caa5be970c5f4f8b09a5f3f2facf41dbf
Jan  1 00:14:06 synocodesign: texts/hun/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/ita/strings) = 31260083120ac283cdffbcb5125276f986c653aedfb7b86ed695f0d805bfaf60
Jan  1 00:14:06 synocodesign: texts/ita/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/jpn/strings) = ed7e700421fbcbb235123cb9677878d1cf4e4a8aeb95d5c4672bd02a07f06050
Jan  1 00:14:06 synocodesign: texts/jpn/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/krn/strings) = 9fb3a65a09ba27ed467dc1f69c6018052b8cdb2a78f8777e5d78ea5520c512e2
Jan  1 00:14:06 synocodesign: texts/krn/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/nld/strings) = 0f85cdc97b7ceecee606e717c81e6aa8c95757390ba206c5f2016e448ecfcfb5
Jan  1 00:14:06 synocodesign: texts/nld/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/nor/strings) = 3bca34926da5beb7471c4eb7f0fa8548019f422e6d32bdf79586eae29cb8a9f3
Jan  1 00:14:06 synocodesign: texts/nor/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/plk/strings) = 16f1ad6aec35b00add15764bd61b89ce48385793361c967f1d61912b169b0e9d
Jan  1 00:14:06 synocodesign: texts/plk/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/ptb/strings) = 43d8df16073f55a31a35f48f0eb58bd0a1b5c933d3518404691769a430d3ef54
Jan  1 00:14:06 synocodesign: texts/ptb/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/ptg/strings) = 70959b1947a9084653b0f2c02a259ae384bed0f943f915fad36820e91b71a9f4
Jan  1 00:14:06 synocodesign: texts/ptg/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/rus/strings) = a7284a09f64c3b30e37b4277ed3f6ed353aa2f5b1b889ac35a26139a7e2b4696
Jan  1 00:14:06 synocodesign: texts/rus/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/spn/strings) = 4d23573dd30d3cd1237ebcbb5a245ec92fe64cd12df7e03ba7361acf9d70f687
Jan  1 00:14:06 synocodesign: texts/spn/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/sve/strings) = 962f68c534ccb1c2fb16203ead371c40086ed87d067266486b1397699d3f640f
Jan  1 00:14:06 synocodesign: texts/sve/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/tha/strings) = f6fe4677f6d67d40127a0f99984a040721ed0b6d5245e0426c809d3b78233c7d
Jan  1 00:14:06 synocodesign: texts/tha/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (texts/trk/strings) = 1f45e3781d7357e229f76e8f6bb3a96b86c49bd6c3880c089bd74f4e6c9fe942
Jan  1 00:14:06 synocodesign: texts/trk/strings: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (expired_models) = efbb8e376238e2ed1a5e064c89aae01f6eafcb75e9060a36d7a84b154da7fabd
Jan  1 00:14:06 synocodesign: expired_models: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (DiskCompatibilityDB.tar) = 9820a1e316f4207f9a7b5da895efc3b3516012396a51a3e3db9bc7cf9fd330e2
Jan  1 00:14:06 synocodesign: DiskCompatibilityDB.tar: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (ha_dummy_ocf/infoset) = b1fc7004374f8532e0ee6b32e2ac17e53f64d45f09d9cccee2514c3440a44e9f
Jan  1 00:14:06 synocodesign: ha_dummy_ocf/infoset: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_rear) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796
Jan  1 00:14:06 synocodesign: ha_dummy_ocf/dsm_rear: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_first) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796
Jan  1 00:14:06 synocodesign: ha_dummy_ocf/dsm_first: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (ha_dummy_ocf/PromoteBegin) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796
Jan  1 00:14:06 synocodesign: ha_dummy_ocf/PromoteBegin: OK
Jan  1 00:14:06 synocodesign: BLAKE2b-256 (synohamessaged-update) = b9b6ebc709777915453d9a402f9346190564cf8a899ad7c8112bed40d97c07da
Jan  1 00:14:06 synocodesign: synohamessaged-update: OK
Jan  1 00:14:06 install.cgi: RemoveUpgradeFile: Remove /tmpData/upd@te.pat...
Jan  1 00:14:06 install.cgi: Verify checksum of [/tmpData/upd@te]...
Jan  1 00:14:08 install.cgi: Pass checksum of /tmpData/upd@te...
Jan  1 00:14:08 updater: updater.c:6767 Start of the updater...
Jan  1 00:14:08 updater: updater.c:3227 orgBuildNumber = 42218, newBuildNumber=42218
Jan  1 00:14:08 updater: util/updater_util.cpp:86 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf
Jan  1 00:14:08 updater: updater.c:7045 ==== Start flash update ====
Jan  1 00:14:08 updater: updater.c:7049 This is X86 platform
Jan  1 00:14:08 updater: boot/boot_lock.c(228): failed to mount boot device /dev/synoboot2 /tmp/bootmnt (errno:2)
Jan  1 00:14:08 updater: updater.c:6510 Failed to mount boot partition
Jan  1 00:14:08 updater: updater.c:3134 No need to reset reason for v.42218 
Jan  1 00:14:08 updater: updater.c:7652 Failed to accomplish the update! (errno = 21)
Jan  1 00:14:08 install.cgi: ninstaller.c:1546 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[21]
Jan  1 00:14:14 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot
Jan  1 00:14:14 install.cgi: ninstaller.c:1515 Moving updater for configuration upgrade...cmd=[/bin/mv -f /tmpData/upd@te/updater /tmpRoot/.updater > /dev/null 2>&1]
Jan  1 00:14:14 install.cgi: ninstaller.c:152 umount partition /tmpRoot
Jan  1 00:14:14 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1]
Jan  1 00:14:14 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat...
Jan  1 00:14:14 install.cgi: ErrFHOSTDoUpgrade(1794): child process failed, retv=-21
Jan  1 00:14:14 install.cgi: ninstaller.c:1811(ErrFHOSTDoUpgrade) err=[-1]
Jan  1 00:14:14 install.cgi: ninstaller.c:1815(ErrFHOSTDoUpgrade) retv=[-21]
Jan  1 00:14:14 install.cgi: install.c:409 Upgrade by the manual patch fail.
Jan  1 00:14:14 install.cgi: install.c:678 Upgrade by the uploaded patch /tmpData/@autoupdate/upload.pat fail.
Jan  1 00:00:00 install.cgi: ninstaller.c:152 umount partition /tmpData
Jan  1 00:00:10 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk'
Jan  1 00:00:10 kernel: [ 1033.052614] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:00:10 synoupgrade: autocleanup/mount.c:27 mount's exit status is zero
Jan  1 00:00:10 synoupgrade: get_disk_dsm_version.c:99 try reading disk dsm's version at file '/_disk//etc.defaults/VERSION' of key 'buildnumber'
Jan  1 00:00:10 kernel: [ 1033.121813] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:10 synoupgrade: get_disk_dsm_version.c:76 failed to load key 'buildnumber' from /_disk/etc.defaults/VERSION
Jan  1 00:00:10 synoupgrade: get_disk_dsm_version.c:104 failed to read dsm version on '/_disk'
Jan  1 00:00:10 synoupgrade: autocleanup/mount.c:44 run '/usr/bin/umount -l /_disk'
Jan  1 00:00:10 synoupgrade: autocleanup/mount.c:54 umount's exit status is zero
Jan  1 00:00:10 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0
Jan  1 00:00:10 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device
Jan  1 00:00:10 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version
Jan  1 00:00:10 kernel: [ 1033.754417] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:00:10 kernel: [ 1033.768015] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:00:10 kernel: [ 1033.781880] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:00:10 kernel: [ 1033.795491] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:00:10 kernel: [ 1033.804293] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:00:10 kernel: [ 1033.817891] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:00:11 kernel: [ 1033.830760] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:00:11 kernel: [ 1033.844360] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:00:11 kernel: [ 1033.853152] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:00:11 kernel: [ 1033.866750] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
Jan  1 00:00:11 kernel: [ 1033.879612] <redpill/smart_shim.c:332> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
Jan  1 00:00:11 kernel: [ 1033.893208] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY

Edited by Dvalin21
Telnet log during install.
Link to comment
Share on other sites
Dvalin21 Super Member

Dvalin21

Posted
Posted

@pocopico

#] PAT file /home/tc/redpill-load/cache/ds3617xs_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3617xs_42218.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0  343M    0  239k    0     0   1077      0 92:55:06  0:03:47 92:51:19     0^C
tc@box:~$ 
 

Is it possible to change the cndl.synology.cn to another source? Every time it gets to 11:00 Central Time I always have an issue trying to build. And when it fails to download, the build stops....

Link to comment
Share on other sites
Dvalin21 Super Member

Dvalin21

Posted
Posted

@pocopico Also just as an FYI

 

tc@box:~$ sudo ./rploader.sh build bromolow-7.0-41222
jq: error (at <stdin>:1): Cannot iterate over null (null)   <---here
jq: error (at <stdin>:1): Cannot iterate over null (null)
Loader source : https://github.com/RedPill-TTG/redpill-load.git Loader Branch : master 
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master 
Extensions :  
Extensions URL : 
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0
TARGET_REVISION : 41222
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> Version is current
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
Using static compiled redpill extension
Looking for redpill for : ds3615xs_41222 
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-3.10.108.tgz
Extracting module
Got redpill-linux-v3.10.108.ko 
Creating module alias json file
Testing modules.alias.3.json -> jq: error: Could not open file modules.alias.3.json: No such file or directory <----and here
Error : File modules.alias.3.json could not be parsed
Starting loader creation 
Checking user_config.json : Done
Cache directory OK

Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted
1 hour ago, Dvalin21 said:

@pocopico

#] PAT file /home/tc/redpill-load/cache/ds3617xs_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3617xs_42218.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0  343M    0  239k    0     0   1077      0 92:55:06  0:03:47 92:51:19     0^C
tc@box:~$ 
 

Is it possible to change the cndl.synology.cn to another source? Every time it gets to 11:00 Central Time I always have an issue trying to build. And when it fails to download, the build stops....

 

Central time 11 a.m. is around 1 a.m. in Taiwan or Beijing.

 

I think this is Synology's regular PM time.

  • Like 1
Link to comment
Share on other sites
Dvalin21 Super Member

Dvalin21

Posted
Posted

@pocopico

When using sudo ./rploader.sh ext bromolow-7.0.1-42218 auto I get the following

 

tc@box:~$ sudo ./rploader.sh ext bromolow-7.0.1-42218 auto
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop 
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master 
Extensions :  
Extensions URL : 
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
Creating module alias json file
Testing modules.alias.3.json -> jq: error: Could not open file modules.alias.3.json: No such file or directory
Error : File modules.alias.3.json could not be parsed
tc@box:~$ 

 

When I do it for broadwell, extensions are found and loaded (tg3 is the only one auto loaded. Still have to add megaraid_sas)

Link to comment
Share on other sites
Amrit86 Newbie

Amrit86

Posted
Posted

Hi all

 

I’ve upgraded to 7.0.1 using the RedPill Tinycore loader and it’s all working fine. It installed 7.0.1-42218 but I’ve seem some people here have Update 2 which fixes some security vulns. The Tinycore loader didn’t give this as an option, can I upgrade from the Synology website or have I missed something?

Link to comment
Share on other sites
Lagwagon Newbie

Lagwagon

Posted
Posted

Hello everyone, 

 

I will start by saying that I am a complete noob in Linux/loader creation. But I am willing to learn and understand. 

I have read the present topic and followed the tuto on https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ So far I awas able to create my own loader but my NIC seems not recognized when rebootin (USB or SATA) and my Nas can't be detected.

My hardware is an HP 54NL, baremetal installation. I am using the onboard NIC and a PCI on with two 1Gbps.  

Here is the logs of my bootloader creation, where my NIC are correctly detected (I assume ?) when building with bromolow-7.0.1-42218 (is it the correct one for N54L?)

  


   ( '>')
  /) TC (\   Core is distributed with ABSOLUTELY NO WARRANTY.
 (/-_--_-\)           www.tinycorelinux.net

tc@box:~$ sudo ./rploader.sh update now
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> Version is current
tc@box:~$ sudo ./rploader.sh serialgen DS3615xs now
Serial Number for Model : 1230LWN010598
Mac Address for Model DS3615xs : 00:11:32:03:03:5D
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ sudo ./rploader.sh satamap now
HBA: 00:11.0 Disks : 6
SataPortMap=6
DiskIdxMap=00
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$
tc@box:~$
tc@box:~$ sudo ./rploader.sh identifyusb now
Found  USB SerialNumber: 0708325D8A1C4C71
Vendor ID : 0x26bd Product ID : 0x9917
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ sudo ./rploader.sh
rploader.sh

Version : 0.4.5
----------------------------------------------------------------------------------------
Usage: ./rploader.sh <action> <platform version> <static or compile module> [extension manager arguments]

Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, satamap, mountshare

- build:     Build the 💊 RedPill LKM and update the loader image for the specified
             platform version and update current loader.

- ext:       Manage extensions, options go after platform (add/force_add/info/remove/update/cleanup/auto)

             example:

             rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json

             or for auto detect use

             rploader.sh ext apollolake-7.0.1-42218 auto

- download:  Download redpill sources only

- clean:     Removes all cached files and starts over

- update:    Checks github repo for latest version of rploader

- listmods:  Tries to figure out required extensions

- serialgen: Generates a serial number and mac address for the following platforms

             DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ DVA3219 DVA3221

- identifyusb: Tries to identify your loader usb stick VID:PID and updates the user_config.json file

- satamap: Tries to identify your SataPortMap and DiskIdxMap values and updates the user_config.json file

- backup:   Backup and make changes /home/tc changed permanent to your loader disk

- mountshare: Mounts a remote CIFS working directory

Available platform versions:
----------------------------------------------------------------------------------------
apollolake-6.2.4-25556
apollolake-7.0-41890
apollolake-7.0.1-42218
broadwell-7.0.1-42218
broadwellink-7.0.1-42218
bromolow-6.2.4-25556
bromolow-7.0-41222
bromolow-7.0.1-42218
----------------------------------------------------------------------------------------
Check global_settings.json for settings.
tc@box:~$ sudo ./rploader.sh build bromolow-7.0.1-42218
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> Version is current
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1051, done.
remote: Counting objects: 100% (1051/1051), done.
remote: Compressing objects: 100% (501/501), done.
remote: Total 1051 (delta 724), reused 870 (delta 543), pack-reused 0
Receiving objects: 100% (1051/1051), 449.04 KiB | 3.08 MiB/s, done.
Resolving deltas: 100% (724/724), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 568, done.
remote: Counting objects: 100% (36/36), done.
remote: Compressing objects: 100% (21/21), done.
remote: Total 568 (delta 6), reused 33 (delta 6), pack-reused 532
Receiving objects: 100% (568/568), 15.05 MiB | 6.05 MiB/s, done.
Resolving deltas: 100% (212/212), done.
Using static compiled redpill extension
Looking for redpill for : ds3615xs_42218
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-3.10.108.tgz
Extracting module
Got redpill-linux-v3.10.108.ko
Testing modules.alias.3.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found SATA Controller : pciid 1002d00004391  Required Extension :
No matching extension
Found VGA Controller : pciid 1002d00009712  Required Extension :
No matching extension
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000e.ko
Searching for matching extension for e1000e.ko
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000e.ko
Searching for matching extension for e1000e.ko
Found Ethernet Interface : pciid 14e4d0000165b Required Extension : tg3.ko
Searching for matching extension for tg3.ko
------------------------------------------------------------------------------------------------
Starting loader creation
Checking user_config.json : Done
Cache directory OK
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%######################################################################### 100.0%
[OK]
[#] ========================================== thethorgroup.boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait
[#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds918p_41890 ds3617xs_42218 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds920p_42218 ds918p_42218 ds3615xs_42218
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%
[OK]
[#] ========================================== thethorgroup.virtio ==========================================
[#] Extension name: VirtIO
[#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar)
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio
[#] Software author: https://www.linux-kvm.org/page/Virtio
[#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json
[#] Platforms supported: ds918p_41890 ds3617xs_42218 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds920p_42218 ds918p_42218 ds3615xs_42218
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating thethorgroup.boot-wait extension...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension thethorgroup.boot-wait index is already up to date
[#] Updating thethorgroup.virtio extension...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension thethorgroup.virtio index is already up to date
[#] Updating thethorgroup.virtio extension... [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds3615xs_42218 platforms extensions...
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%######################################################################### 100.0%

[#] Filling-in newly downloaded recipe for extension thethorgroup.boot-wait platform ds3615xs_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3615xs_42218/boot-wait.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3615xs_42218/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension thethorgroup.boot-wait platform ds3615xs_42218
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/raw/master/recipes/ds3615xs_41222.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%######################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension thethorgroup.virtio platform ds3615xs_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/src/check-virtio.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/check-virtio.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/check-virtio.sh file... [OK]
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/releases/download/v1.0.0/virtio-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz
######################################################################### 100.0%######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/... [OK]
[#] Successfully processed recipe for extension thethorgroup.virtio platform ds3615xs_42218
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/... [OK]
[#] Updating extensions... [OK]
[#] PAT file /home/tc/redpill-load/cache/ds3615xs_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3615xs_42218.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  339M  100  339M    0     0  7398k      0  0:00:46  0:00:46 --:--:-- 7593k
[#] Verifying /home/tc/redpill-load/cache/ds3615xs_42218.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds3615xs_42218.pat file to /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/zImage to /home/tc/redpill-load/build/1645005356/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1645005356/rd-ds3615xs_42218-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1645005356/rd-ds3615xs_42218-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1645005356/rd-patched-ds3615xs_42218.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds3615xs_42218 platform extensions to /home/tc/redpill-load/build/1645005356/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1645005356/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sde1 to localdiskp1
/dev/sde2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS3615xs v7.0.1-42218 (USB, Verbose)' {
menuentry 'RedPill DS3615xs v7.0.1-42218 (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {

 

do yo see anything that I did wrong ? Any help or guidance would be really appreciated :)

Thanks !

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
18 minutes ago, Lagwagon said:

Hello everyone, 

 

I will start by saying that I am a complete noob in Linux/loader creation. But I am willing to learn and understand. 

I have read the present topic and followed the tuto on https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ So far I awas able to create my own loader but my NIC seems not recognized when rebootin (USB or SATA) and my Nas can't be detected.

My hardware is an HP 54NL, baremetal installation. I am using the onboard NIC and a PCI on with two 1Gbps.  

Here is the logs of my bootloader creation, where my NIC are correctly detected (I assume ?) when building with bromolow-7.0.1-42218 (is it the correct one for N54L?)

  



   ( '>')
  /) TC (\   Core is distributed with ABSOLUTELY NO WARRANTY.
 (/-_--_-\)           www.tinycorelinux.net

tc@box:~$ sudo ./rploader.sh update now
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> Version is current
tc@box:~$ sudo ./rploader.sh serialgen DS3615xs now
Serial Number for Model : 1230LWN010598
Mac Address for Model DS3615xs : 00:11:32:03:03:5D
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ sudo ./rploader.sh satamap now
HBA: 00:11.0 Disks : 6
SataPortMap=6
DiskIdxMap=00
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$
tc@box:~$
tc@box:~$ sudo ./rploader.sh identifyusb now
Found  USB SerialNumber: 0708325D8A1C4C71
Vendor ID : 0x26bd Product ID : 0x9917
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ sudo ./rploader.sh
rploader.sh

Version : 0.4.5
----------------------------------------------------------------------------------------
Usage: ./rploader.sh <action> <platform version> <static or compile module> [extension manager arguments]

Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, satamap, mountshare

- build:     Build the  RedPill LKM and update the loader image for the specified
             platform version and update current loader.

- ext:       Manage extensions, options go after platform (add/force_add/info/remove/update/cleanup/auto)

             example:

             rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json

             or for auto detect use

             rploader.sh ext apollolake-7.0.1-42218 auto

- download:  Download redpill sources only

- clean:     Removes all cached files and starts over

- update:    Checks github repo for latest version of rploader

- listmods:  Tries to figure out required extensions

- serialgen: Generates a serial number and mac address for the following platforms

             DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ DVA3219 DVA3221

- identifyusb: Tries to identify your loader usb stick VID:PID and updates the user_config.json file

- satamap: Tries to identify your SataPortMap and DiskIdxMap values and updates the user_config.json file

- backup:   Backup and make changes /home/tc changed permanent to your loader disk

- mountshare: Mounts a remote CIFS working directory

Available platform versions:
----------------------------------------------------------------------------------------
apollolake-6.2.4-25556
apollolake-7.0-41890
apollolake-7.0.1-42218
broadwell-7.0.1-42218
broadwellink-7.0.1-42218
bromolow-6.2.4-25556
bromolow-7.0-41222
bromolow-7.0.1-42218
----------------------------------------------------------------------------------------
Check global_settings.json for settings.
tc@box:~$ sudo ./rploader.sh build bromolow-7.0.1-42218
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> Version is current
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1051, done.
remote: Counting objects: 100% (1051/1051), done.
remote: Compressing objects: 100% (501/501), done.
remote: Total 1051 (delta 724), reused 870 (delta 543), pack-reused 0
Receiving objects: 100% (1051/1051), 449.04 KiB | 3.08 MiB/s, done.
Resolving deltas: 100% (724/724), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 568, done.
remote: Counting objects: 100% (36/36), done.
remote: Compressing objects: 100% (21/21), done.
remote: Total 568 (delta 6), reused 33 (delta 6), pack-reused 532
Receiving objects: 100% (568/568), 15.05 MiB | 6.05 MiB/s, done.
Resolving deltas: 100% (212/212), done.
Using static compiled redpill extension
Looking for redpill for : ds3615xs_42218
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-3.10.108.tgz
Extracting module
Got redpill-linux-v3.10.108.ko
Testing modules.alias.3.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found SATA Controller : pciid 1002d00004391  Required Extension :
No matching extension
Found VGA Controller : pciid 1002d00009712  Required Extension :
No matching extension
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000e.ko
Searching for matching extension for e1000e.ko
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000e.ko
Searching for matching extension for e1000e.ko
Found Ethernet Interface : pciid 14e4d0000165b Required Extension : tg3.ko
Searching for matching extension for tg3.ko
------------------------------------------------------------------------------------------------
Starting loader creation
Checking user_config.json : Done
Cache directory OK
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%######################################################################### 100.0%
[OK]
[#] ========================================== thethorgroup.boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait
[#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds918p_41890 ds3617xs_42218 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds920p_42218 ds918p_42218 ds3615xs_42218
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%
[OK]
[#] ========================================== thethorgroup.virtio ==========================================
[#] Extension name: VirtIO
[#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar)
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio
[#] Software author: https://www.linux-kvm.org/page/Virtio
[#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json
[#] Platforms supported: ds918p_41890 ds3617xs_42218 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds920p_42218 ds918p_42218 ds3615xs_42218
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating thethorgroup.boot-wait extension...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension thethorgroup.boot-wait index is already up to date
[#] Updating thethorgroup.virtio extension...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension thethorgroup.virtio index is already up to date
[#] Updating thethorgroup.virtio extension... [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds3615xs_42218 platforms extensions...
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%######################################################################### 100.0%

[#] Filling-in newly downloaded recipe for extension thethorgroup.boot-wait platform ds3615xs_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3615xs_42218/boot-wait.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3615xs_42218/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension thethorgroup.boot-wait platform ds3615xs_42218
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/raw/master/recipes/ds3615xs_41222.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%######################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension thethorgroup.virtio platform ds3615xs_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/src/check-virtio.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/check-virtio.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/check-virtio.sh file... [OK]
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/releases/download/v1.0.0/virtio-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz
######################################################################### 100.0%######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/... [OK]
[#] Successfully processed recipe for extension thethorgroup.virtio platform ds3615xs_42218
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/... [OK]
[#] Updating extensions... [OK]
[#] PAT file /home/tc/redpill-load/cache/ds3615xs_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3615xs_42218.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  339M  100  339M    0     0  7398k      0  0:00:46  0:00:46 --:--:-- 7593k
[#] Verifying /home/tc/redpill-load/cache/ds3615xs_42218.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds3615xs_42218.pat file to /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/zImage to /home/tc/redpill-load/build/1645005356/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1645005356/pat-ds3615xs_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1645005356/rd-ds3615xs_42218-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1645005356/rd-ds3615xs_42218-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1645005356/rd-patched-ds3615xs_42218.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds3615xs_42218 platform extensions to /home/tc/redpill-load/build/1645005356/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1645005356/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sde1 to localdiskp1
/dev/sde2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS3615xs v7.0.1-42218 (USB, Verbose)' {
menuentry 'RedPill DS3615xs v7.0.1-42218 (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {

 

do yo see anything that I did wrong ? Any help or guidance would be really appreciated :)

Thanks !

 

For some reason rploader did not download the required extensions. Can you please run ./rploader.sh listmods bromolow-7.0.1-42218 before running build ?

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
1 hour ago, Dvalin21 said:

@pocopico

When using sudo ./rploader.sh ext bromolow-7.0.1-42218 auto I get the following

 

tc@box:~$ sudo ./rploader.sh ext bromolow-7.0.1-42218 auto
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop 
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master 
Extensions :  
Extensions URL : 
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
Creating module alias json file
Testing modules.alias.3.json -> jq: error: Could not open file modules.alias.3.json: No such file or directory
Error : File modules.alias.3.json could not be parsed
tc@box:~$ 

 

When I do it for broadwell, extensions are found and loaded (tg3 is the only one auto loaded. Still have to add megaraid_sas)

 

You are using an old image loader and you are missing modules.alias.3.json. You can do a

 

# wget https://github.com/pocopico/tinycore-redpill/blob/main/modules.alias.3.json.gz?raw=true 

 

and then 

 

# backup

  • Like 1
Link to comment
Share on other sites
Lagwagon Newbie

Lagwagon

Posted
Posted
9 minutes ago, pocopico said:

 

For some reason rploader did not download the required extensions. Can you please run ./rploader.sh listmods bromolow-7.0.1-42218 before running build ?

Here it is : 

Quote

tc@box:~$ sudo ./rploader.sh listmods bromolow-7.0.1-42218
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : devel                        op
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill                         module branch : master
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bro                        molow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS G                        PL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489e                        d
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
Testing modules.alias.3.json -> File OK
--------------------------------------------------------------------------------                        ----------------
It looks that you will need the following modules :


Found SATA Controller : pciid 1002d00004391  Required Extension :
No matching extension
Found VGA Controller : pciid 1002d00009712  Required Extension :
No matching extension
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000e.ko
Searching for matching extension for e1000e.ko
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000e.ko
Searching for matching extension for e1000e.ko
Found Ethernet Interface : pciid 14e4d0000165b Required Extension : tg3.ko
Searching for matching extension for tg3.ko
--------------------------------------------------------------------------------                        ----------------
 

Is it ok as this or do I need to do additionnal commands? 

Thanks

Link to comment
Share on other sites
Lagwagon Newbie

Lagwagon

Posted
Posted
2 minutes ago, pocopico said:

 

hm, i dont see the extensions being downloaded. Can you please also do an

# ls -lR /home/tc/redpill-load/custom/extensions 

 

 

here is the result :  

 sudo ls -lR /home/tc/redpill-load/custom/extensions
/home/tc/redpill-load/custom/extensions:
total 4
-rw-r--r-- 1 root staff 920 Feb 16 09:55 REALLY_README.txt
drwxr-sr-x 3 root staff  80 Feb 16 10:26 thethorgroup.boot-wait
drwxr-sr-x 3 root staff  80 Feb 16 10:26 thethorgroup.virtio

/home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait:
total 4
drwxr-sr-x 2 root staff   80 Feb 16 10:26 ds3615xs_42218
-rw-r--r-- 1 root staff 1415 Feb 16 09:55 thethorgroup.boot-wait.json

/home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3615xs_42218:
total 8
-rw-r--r-- 1 root staff 1106 Feb 16 09:56 boot-wait.sh
-rw-r--r-- 1 root staff  324 Feb 16 09:56 ds3615xs_42218.json

/home/tc/redpill-load/custom/extensions/thethorgroup.virtio:
total 4
drwxr-sr-x 3 root staff  300 Feb 16 10:26 ds3615xs_42218
-rw-r--r-- 1 root staff 1498 Feb 16 09:55 thethorgroup.virtio.json

/home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218:
total 212
-rw-r--r-- 1 root staff   204 Feb 16 09:56 check-virtio.sh
-rw-r--r-- 1 root staff   840 Feb 16 09:56 ds3615xs_42218.json
drwxr-xr-x 2 root root     40 Jan  1  1970 virtio-3.10.108
-rw-r--r-- 1 root root   7024 Jan  1  1970 virtio-rng.ko
-rw-r--r-- 1 root root   9976 Jan  1  1970 virtio.ko
-rw-r--r-- 1 root root  12184 Jan  1  1970 virtio_balloon.ko
-rw-r--r-- 1 root root  21144 Jan  1  1970 virtio_blk.ko
-rw-r--r-- 1 root root  35648 Jan  1  1970 virtio_console.ko
-rw-r--r-- 1 root root   9760 Jan  1  1970 virtio_mmio.ko
-rw-r--r-- 1 root root  39200 Jan  1  1970 virtio_net.ko
-rw-r--r-- 1 root root  15568 Jan  1  1970 virtio_pci.ko
-rw-r--r-- 1 root root  18072 Jan  1  1970 virtio_ring.ko
-rw-r--r-- 1 root root  21632 Jan  1  1970 virtio_scsi.ko

/home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108:
total 0

 

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
Just now, Lagwagon said:

here is the result :  


 sudo ls -lR /home/tc/redpill-load/custom/extensions
/home/tc/redpill-load/custom/extensions:
total 4
-rw-r--r-- 1 root staff 920 Feb 16 09:55 REALLY_README.txt
drwxr-sr-x 3 root staff  80 Feb 16 10:26 thethorgroup.boot-wait
drwxr-sr-x 3 root staff  80 Feb 16 10:26 thethorgroup.virtio

/home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait:
total 4
drwxr-sr-x 2 root staff   80 Feb 16 10:26 ds3615xs_42218
-rw-r--r-- 1 root staff 1415 Feb 16 09:55 thethorgroup.boot-wait.json

/home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3615xs_42218:
total 8
-rw-r--r-- 1 root staff 1106 Feb 16 09:56 boot-wait.sh
-rw-r--r-- 1 root staff  324 Feb 16 09:56 ds3615xs_42218.json

/home/tc/redpill-load/custom/extensions/thethorgroup.virtio:
total 4
drwxr-sr-x 3 root staff  300 Feb 16 10:26 ds3615xs_42218
-rw-r--r-- 1 root staff 1498 Feb 16 09:55 thethorgroup.virtio.json

/home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218:
total 212
-rw-r--r-- 1 root staff   204 Feb 16 09:56 check-virtio.sh
-rw-r--r-- 1 root staff   840 Feb 16 09:56 ds3615xs_42218.json
drwxr-xr-x 2 root root     40 Jan  1  1970 virtio-3.10.108
-rw-r--r-- 1 root root   7024 Jan  1  1970 virtio-rng.ko
-rw-r--r-- 1 root root   9976 Jan  1  1970 virtio.ko
-rw-r--r-- 1 root root  12184 Jan  1  1970 virtio_balloon.ko
-rw-r--r-- 1 root root  21144 Jan  1  1970 virtio_blk.ko
-rw-r--r-- 1 root root  35648 Jan  1  1970 virtio_console.ko
-rw-r--r-- 1 root root   9760 Jan  1  1970 virtio_mmio.ko
-rw-r--r-- 1 root root  39200 Jan  1  1970 virtio_net.ko
-rw-r--r-- 1 root root  15568 Jan  1  1970 virtio_pci.ko
-rw-r--r-- 1 root root  18072 Jan  1  1970 virtio_ring.ko
-rw-r--r-- 1 root root  21632 Jan  1  1970 virtio_scsi.ko

/home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds3615xs_42218/virtio-3.10.108:
total 0

 

 

I found where the problem is .. i need some time to fix it. In the meantime do the following : 

 

#./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json 

# ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json

# backup

 

 

  • Thanks 1
Link to comment
Share on other sites
Lagwagon Newbie

Lagwagon

Posted
Posted
36 minutes ago, pocopico said:

 

I found where the problem is .. i need some time to fix it. In the meantime do the following : 

 

#./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json 

# ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json

# backup

 

 

 

I updated and saw that there was already an update available, thanks for your reactivity. 

I just did waht you asked and here is the result.  

 sudo ./rploader.sh listmods bromolow-7.0.1-42218
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
Testing modules.alias.3.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found SATA Controller : pciid 1002d00004391  Required Extension :
No matching extension
Found VGA Controller : pciid 1002d00009712  Required Extension :
No matching extension
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000eg
Searching for matching extension for e1000eg
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000eg
Searching for matching extension for e1000eg
Found Ethernet Interface : pciid 14e4d0000165b Required Extension : tg3g
Searching for matching extension for tg3g
------------------------------------------------------------------------------------------------

 

Time for testing :)

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
19 minutes ago, Lagwagon said:

 

I updated and saw that there was already an update available, thanks for your reactivity. 

I just did waht you asked and here is the result.  


 sudo ./rploader.sh listmods bromolow-7.0.1-42218
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE= modules.alias.3.json
Checking Internet Access -> OK
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
Testing modules.alias.3.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found SATA Controller : pciid 1002d00004391  Required Extension :
No matching extension
Found VGA Controller : pciid 1002d00009712  Required Extension :
No matching extension
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000eg
Searching for matching extension for e1000eg
Found Ethernet Interface : pciid 8086d0000105e Required Extension : e1000eg
Searching for matching extension for e1000eg
Found Ethernet Interface : pciid 14e4d0000165b Required Extension : tg3g
Searching for matching extension for tg3g
------------------------------------------------------------------------------------------------

 

Time for testing :)

 

Please run

 

./rploader.sh update now again and yes to overwrite the files

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...