Invaliduser Posted January 14, 2022 Share #251 Posted January 14, 2022 3 minutes ago, g4sho said: @pocopicoWE WiN! Thank you so much, that did the trick. You are one helluva programmer and troubleshoot. The community is blessed to have you. Keep it moving forward. Now you can focus on cleaning that desk 😉 Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 14, 2022 Share #252 Posted January 14, 2022 (edited) 3 minutes ago, Invaliduser said: Now you can focus on cleaning that desk 😉 LoL, that is a tv stand for a 65inch monitor. But I hear you. I am retired and lazy at this point in my life, so eventually I will get around to it. Edited January 14, 2022 by g4sho 1 Quote Link to comment Share on other sites More sharing options...
pro_info Posted January 14, 2022 Share #253 Posted January 14, 2022 Hello guys, Personally, I have this error on workstation 16.2.1 : [ 1.016710] pci 0000:00:18.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.018053] pci 0000:00:18.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.018710] pci 0000:00:18.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.019707] pci 0000:00:18.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.020905] pci 0000:00:0f.0: BAR 6: assigned [mem 0xc0000000-0xc0007fff pref] [ 1.021712] pci 0000:00:10.0: BAR 6: assigned [mem 0xc0008000-0xc000bfff pref] [ 1.022746] pci 0000:00:15.3: BAR 13: can't assign io (size 0x1000) [ 1.022781] pci 0000:00:15.4: BAR 13: can't assign io (size 0x1000) [ 1.023873] pci 0000:00:15.5: BAR 13: can't assign io (size 0x1000) [ 1.024711] pci 0000:00:15.6: BAR 13: can't assign io (size 0x1000) [ 1.024746] pci 0000:00:15.7: BAR 13: can't assign io (size 0x1000) [ 1.025707] pci 0000:00:16.3: BAR 13: can't assign io (size 0x1000) [ 1.026778] pci 0000:00:16.4: BAR 13: can't assign io (size 0x1000) [ 1.026844] pci 0000:00:16.5: BAR 13: can't assign io (size 0x1000) [ 1.026879] pci 0000:00:16.6: BAR 13: can't assign io (size 0x1000) [ 1.027776] pci 0000:00:16.7: BAR 13: can't assign io (size 0x1000) [ 1.027811] pci 0000:00:17.3: BAR 13: can't assign io (size 0x1000) [ 1.028711] pci 0000:00:17.4: BAR 13: can't assign io (size 0x1000) [ 1.029856] pci 0000:00:17.5: BAR 13: can't assign io (size 0x1000) [ 1.030707] pci 0000:00:17.6: BAR 13: can't assign io (size 0x1000) [ 1.030742] pci 0000:00:17.7: BAR 13: can't assign io (size 0x1000) [ 1.031784] pci 0000:00:18.2: BAR 13: can't assign io (size 0x1000) [ 1.031819] pci 0000:00:18.3: BAR 13: can't assign io (size 0x1000) [ 1.032901] pci 0000:00:18.4: BAR 13: can't assign io (size 0x1000) [ 1.033710] pci 0000:00:18.5: BAR 13: can't assign io (size 0x1000) [ 1.034706] pci 0000:00:18.6: BAR 13: can't assign io (size 0x1000) [ 1.034741] pci 0000:00:18.7: BAR 13: can't assign io (size 0x1000) [ 1.035850] pci 0000:00:18.7: BAR 13: can't assign io (size 0x1000) [ 1.036707] pci 0000:00:18.6: BAR 13: can't assign io (size 0x1000) [ 1.036742] pci 0000:00:18.5: BAR 13: can't assign io (size 0x1000) [ 1.037705] pci 0000:00:18.4: BAR 13: can't assign io (size 0x1000) [ 1.037740] pci 0000:00:18.3: BAR 13: can't assign io (size 0x1000) [ 1.038877] pci 0000:00:18.2: BAR 13: can't assign io (size 0x1000) [ 1.039709] pci 0000:00:17.7: BAR 13: can't assign io (size 0x1000) [ 1.039744] pci 0000:00:17.6: BAR 13: can't assign io (size 0x1000) [ 1.040710] pci 0000:00:17.5: BAR 13: can't assign io (size 0x1000) [ 1.041811] pci 0000:00:17.4: BAR 13: can't assign io (size 0x1000) [ 1.042715] pci 0000:00:17.3: BAR 13: can't assign io (size 0x1000) [ 1.042750] pci 0000:00:16.7: BAR 13: can't assign io (size 0x1000) [ 1.042785] pci 0000:00:16.6: BAR 13: can't assign io (size 0x1000) [ 1.042820] pci 0000:00:16.5: BAR 13: can't assign io (size 0x1000) [ 1.043705] pci 0000:00:16.4: BAR 13: can't assign io (size 0x1000) [ 1.044765] pci 0000:00:16.3: BAR 13: can't assign io (size 0x1000) [ 1.044835] pci 0000:00:15.7: BAR 13: can't assign io (size 0x1000) [ 1.045714] pci 0000:00:15.6: BAR 13: can't assign io (size 0x1000) [ 1.046704] pci 0000:00:15.5: BAR 13: can't assign io (size 0x1000) [ 1.047781] pci 0000:00:15.4: BAR 13: can't assign io (size 0x1000) [ 1.048715] pci 0000:00:15.3: BAR 13: can't assign io (size 0x1000) [ 1.048750] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.048785] pci 0000:02:01.0: BAR 6: assigned [mem 0xe7b00000-0xe7b0ffff pref] [ 1.049705] pci 0000:02:04.0: BAR 6: assigned [mem 0xe7b10000-0xe7b1ffff pref] [ 1.050884] pci 0000:00:11.0: PCI bridge to [bus 02] [ 1.051718] pci 0000:00:11.0: bridge window [io 0x2000-0x3fff] [ 1.051753] pci 0000:00:11.0: bridge window [mem 0xfd500000-0xfdffffff] [ 1.052727] pci 0000:00:11.0: bridge window [mem 0xe7b00000-0xe7ffffff 64bit pref] [ 1.053902] pci 0000:00:15.0: PCI bridge to [bus 03] [ 1.054748] pci 0000:00:15.0: bridge window [io 0x4000-0x4fff] [ 1.055752] pci 0000:00:15.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 1.055787] pci 0000:00:15.0: bridge window [mem 0xe7a00000-0xe7afffff 64bit pref] [ 1.057000] pci 0000:00:15.1: PCI bridge to [bus 04] [ 1.057035] pci 0000:00:15.1: bridge window [io 0x8000-0x8fff] [ 1.057727] pci 0000:00:15.1: bridge window [mem 0xfd000000-0xfd0fffff] [ 1.058727] pci 0000:00:15.1: bridge window [mem 0xe7600000-0xe76fffff 64bit pref] [ 1.059905] pci 0000:00:15.2: PCI bridge to [bus 05] [ 1.060721] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] [ 1.060756] pci 0000:00:15.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 1.060791] pci 0000:00:15.2: bridge window [mem 0xe7200000-0xe72fffff 64bit pref] [ 1.061732] pci 0000:00:15.3: PCI bridge to [bus 06] [ 1.061767] pci 0000:00:15.3: bridge window [mem 0xfc800000-0xfc8fffff] [ 1.063021] pci 0000:00:15.3: bridge window [mem 0xe6e00000-0xe6efffff 64bit pref] [ 1.063727] pci 0000:00:15.4: PCI bridge to [bus 07] [ 1.063762] pci 0000:00:15.4: bridge window [mem 0xfc400000-0xfc4fffff] [ 1.064765] pci 0000:00:15.4: bridge window [mem 0xe6a00000-0xe6afffff 64bit pref] [ 1.065625] pci 0000:00:15.5: PCI bridge to [bus 08] [ 1.065735] pci 0000:00:15.5: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.066726] pci 0000:00:15.5: bridge window [mem 0xe6600000-0xe66fffff 64bit pref] [ 1.067727] pci 0000:00:15.6: PCI bridge to [bus 09] [ 1.068825] pci 0000:00:15.6: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.069750] pci 0000:00:15.6: bridge window [mem 0xe6200000-0xe62fffff 64bit pref] [ 1.070732] pci 0000:00:15.7: PCI bridge to [bus 0a] [ 1.071876] pci 0000:00:15.7: bridge window [mem 0xfb800000-0xfb8fffff] [ 1.072725] pci 0000:00:15.7: bridge window [mem 0xe5e00000-0xe5efffff 64bit pref] [ 1.073724] pci 0000:00:16.0: PCI bridge to [bus 0b] [ 1.074716] pci 0000:00:16.0: bridge window [io 0x5000-0x5fff] [ 1.074833] pci 0000:00:16.0: bridge window [mem 0xfd300000-0xfd3fffff] [ 1.075724] pci 0000:00:16.0: bridge window [mem 0xe7900000-0xe79fffff 64bit pref] [ 1.076724] pci 0000:00:16.1: PCI bridge to [bus 0c] [ 1.076759] pci 0000:00:16.1: bridge window [io 0x9000-0x9fff] [ 1.077791] pci 0000:00:16.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 1.078724] pci 0000:00:16.1: bridge window [mem 0xe7500000-0xe75fffff 64bit pref] [ 1.079724] pci 0000:00:16.2: PCI bridge to [bus 0d] [ 1.079759] pci 0000:00:16.2: bridge window [io 0xd000-0xdfff] [ 1.080905] pci 0000:00:16.2: bridge window [mem 0xfcb00000-0xfcbfffff] [ 1.081723] pci 0000:00:16.2: bridge window [mem 0xe7100000-0xe71fffff 64bit pref] [ 1.082723] pci 0000:00:16.3: PCI bridge to [bus 0e] [ 1.083779] pci 0000:00:16.3: bridge window [mem 0xfc700000-0xfc7fffff] [ 1.083834] pci 0000:00:16.3: bridge window [mem 0xe6d00000-0xe6dfffff 64bit pref] [ 1.084724] pci 0000:00:16.4: PCI bridge to [bus 0f] [ 1.084759] pci 0000:00:16.4: bridge window [mem 0xfc300000-0xfc3fffff] [ 1.085723] pci 0000:00:16.4: bridge window [mem 0xe6900000-0xe69fffff 64bit pref] [ 1.086894] pci 0000:00:16.5: PCI bridge to [bus 10] [ 1.087722] pci 0000:00:16.5: bridge window [mem 0xfbf00000-0xfbffffff] [ 1.088722] pci 0000:00:16.5: bridge window [mem 0xe6500000-0xe65fffff 64bit pref] [ 1.089898] pci 0000:00:16.6: PCI bridge to [bus 11] [ 1.089933] pci 0000:00:16.6: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.090722] pci 0000:00:16.6: bridge window [mem 0xe6100000-0xe61fffff 64bit pref] [ 1.091722] pci 0000:00:16.7: PCI bridge to [bus 12] [ 1.092777] pci 0000:00:16.7: bridge window [mem 0xfb700000-0xfb7fffff] [ 1.093749] pci 0000:00:16.7: bridge window [mem 0xe5d00000-0xe5dfffff 64bit pref] [ 1.094734] pci 0000:00:17.0: PCI bridge to [bus 13] [ 1.095831] pci 0000:00:17.0: bridge window [io 0x6000-0x6fff] [ 1.096726] pci 0000:00:17.0: bridge window [mem 0xfd200000-0xfd2fffff] [ 1.097741] pci 0000:00:17.0: bridge window [mem 0xe7800000-0xe78fffff 64bit pref] [ 1.098888] pci 0000:00:17.1: PCI bridge to [bus 14] [ 1.098923] pci 0000:00:17.1: bridge window [io 0xa000-0xafff] [ 1.099759] pci 0000:00:17.1: bridge window [mem 0xfce00000-0xfcefffff] [ 1.100779] pci 0000:00:17.1: bridge window [mem 0xe7400000-0xe74fffff 64bit pref] [ 1.102213] pci 0000:00:17.2: PCI bridge to [bus 15] [ 1.102772] pci 0000:00:17.2: bridge window [io 0xe000-0xefff] [ 1.103790] pci 0000:00:17.2: bridge window [mem 0xfca00000-0xfcafffff] [ 1.105034] pci 0000:00:17.2: bridge window [mem 0xe7000000-0xe70fffff 64bit pref] [ 1.105756] pci 0000:00:17.3: PCI bridge to [bus 16] [ 1.106785] pci 0000:00:17.3: bridge window [mem 0xfc600000-0xfc6fffff] [ 1.108166] pci 0000:00:17.3: bridge window [mem 0xe6c00000-0xe6cfffff 64bit pref] [ 1.108802] pci 0000:00:17.4: PCI bridge to [bus 17] [ 1.109770] pci 0000:00:17.4: bridge window [mem 0xfc200000-0xfc2fffff] [ 1.111152] pci 0000:00:17.4: bridge window [mem 0xe6800000-0xe68fffff 64bit pref] [ 1.111789] pci 0000:00:17.5: PCI bridge to [bus 18] [ 1.112802] pci 0000:00:17.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.114009] pci 0000:00:17.5: bridge window [mem 0xe6400000-0xe64fffff 64bit pref] [ 1.114751] pci 0000:00:17.6: PCI bridge to [bus 19] [ 1.115779] pci 0000:00:17.6: bridge window [mem 0xfba00000-0xfbafffff] [ 1.115814] pci 0000:00:17.6: bridge window [mem 0xe6000000-0xe60fffff 64bit pref] [ 1.116982] pci 0000:00:17.7: PCI bridge to [bus 1a] [ 1.117723] pci 0000:00:17.7: bridge window [mem 0xfb600000-0xfb6fffff] [ 1.117758] pci 0000:00:17.7: bridge window [mem 0xe5c00000-0xe5cfffff 64bit pref] [ 1.118731] pci 0000:00:18.0: PCI bridge to [bus 1b] [ 1.118766] pci 0000:00:18.0: bridge window [io 0x7000-0x7fff] [ 1.120015] pci 0000:00:18.0: bridge window [mem 0xfd100000-0xfd1fffff] [ 1.120050] pci 0000:00:18.0: bridge window [mem 0xe7700000-0xe77fffff 64bit pref] [ 1.120755] pci 0000:00:18.1: PCI bridge to [bus 1c] [ 1.121738] pci 0000:00:18.1: bridge window [io 0xb000-0xbfff] [ 1.121773] pci 0000:00:18.1: bridge window [mem 0xfcd00000-0xfcdfffff] [ 1.122978] pci 0000:00:18.1: bridge window [mem 0xe7300000-0xe73fffff 64bit pref] [ 1.123731] pci 0000:00:18.2: PCI bridge to [bus 1d] [ 1.123766] pci 0000:00:18.2: bridge window [mem 0xfc900000-0xfc9fffff] [ 1.124744] pci 0000:00:18.2: bridge window [mem 0xe6f00000-0xe6ffffff 64bit pref] [ 1.126097] pci 0000:00:18.3: PCI bridge to [bus 1e] [ 1.126763] pci 0000:00:18.3: bridge window [mem 0xfc500000-0xfc5fffff] [ 1.127772] pci 0000:00:18.3: bridge window [mem 0xe6b00000-0xe6bfffff 64bit pref] [ 1.129055] pci 0000:00:18.4: PCI bridge to [bus 1f] [ 1.129797] pci 0000:00:18.4: bridge window [mem 0xfc100000-0xfc1fffff] [ 1.130746] pci 0000:00:18.4: bridge window [mem 0xe6700000-0xe67fffff 64bit pref] [ 1.132143] pci 0000:00:18.5: PCI bridge to [bus 20] [ 1.132802] pci 0000:00:18.5: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.133778] pci 0000:00:18.5: bridge window [mem 0xe6300000-0xe63fffff 64bit pref] [ 1.135160] pci 0000:00:18.6: PCI bridge to [bus 21] [ 1.135769] pci 0000:00:18.6: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.136805] pci 0000:00:18.6: bridge window [mem 0xe5f00000-0xe5ffffff 64bit pref] [ 1.138061] pci 0000:00:18.7: PCI bridge to [bus 22] [ 1.138743] pci 0000:00:18.7: bridge window [mem 0xfb500000-0xfb5fffff] [ 1.139817] pci 0000:00:18.7: bridge window [mem 0xe5b00000-0xe5bfffff 64bit pref] [ 1.141112] pci 0000:00:01.0: setting latency timer to 64 [ 1.142777] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] [ 1.144120] pci_bus 0000:00: resource 5 [mem 0x000cc000-0x000cffff] [ 1.144786] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff] [ 1.145762] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 1.145797] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 1.146854] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 1.147708] pci_bus 0000:00: resource 10 [io 0x0000-0x0cf7] [ 1.147743] pci_bus 0000:00: resource 11 [io 0x0d00-0xfeff] [ 1.148702] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 1.149964] pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfdffffff] [ 1.150773] pci_bus 0000:02: resource 2 [mem 0xe7b00000-0xe7ffffff 64bit pref] [ 1.151715] pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff] [ 1.152811] pci_bus 0000:02: resource 5 [mem 0x000cc000-0x000cffff] [ 1.153720] pci_bus 0000:02: resource 6 [mem 0x000d0000-0x000d3fff] [ 1.154720] pci_bus 0000:02: resource 7 [mem 0x000d4000-0x000d7fff] [ 1.155979] pci_bus 0000:02: resource 8 [mem 0x000d8000-0x000dbfff] [ 1.156738] pci_bus 0000:02: resource 9 [mem 0xc0000000-0xfebfffff] [ 1.157715] pci_bus 0000:02: resource 10 [io 0x0000-0x0cf7] [ 1.158795] pci_bus 0000:02: resource 11 [io 0x0d00-0xfeff] [ 1.159731] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 1.160736] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd4fffff] [ 1.161935] pci_bus 0000:03: resource 2 [mem 0xe7a00000-0xe7afffff 64bit pref] [ 1.162747] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff] [ 1.163695] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfd0fffff] [ 1.164900] pci_bus 0000:04: resource 2 [mem 0xe7600000-0xe76fffff 64bit pref] [ 1.165700] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 1.165735] pci_bus 0000:05: resource 1 [mem 0xfcc00000-0xfccfffff] [ 1.166735] pci_bus 0000:05: resource 2 [mem 0xe7200000-0xe72fffff 64bit pref] [ 1.167980] pci_bus 0000:06: resource 1 [mem 0xfc800000-0xfc8fffff] [ 1.168744] pci_bus 0000:06: resource 2 [mem 0xe6e00000-0xe6efffff 64bit pref] [ 1.169754] pci_bus 0000:07: resource 1 [mem 0xfc400000-0xfc4fffff] [ 1.170777] pci_bus 0000:07: resource 2 [mem 0xe6a00000-0xe6afffff 64bit pref] [ 1.170860] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff] [ 1.171723] pci_bus 0000:08: resource 2 [mem 0xe6600000-0xe66fffff 64bit pref] [ 1.172738] pci_bus 0000:09: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.172770] pci_bus 0000:09: resource 2 [mem 0xe6200000-0xe62fffff 64bit pref] [ 1.174072] pci_bus 0000:0a: resource 1 [mem 0xfb800000-0xfb8fffff] [ 1.174758] pci_bus 0000:0a: resource 2 [mem 0xe5e00000-0xe5efffff 64bit pref] [ 1.175715] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff] [ 1.175747] pci_bus 0000:0b: resource 1 [mem 0xfd300000-0xfd3fffff] [ 1.176867] pci_bus 0000:0b: resource 2 [mem 0xe7900000-0xe79fffff 64bit pref] [ 1.176899] pci_bus 0000:0c: resource 0 [io 0x9000-0x9fff] [ 1.177722] pci_bus 0000:0c: resource 1 [mem 0xfcf00000-0xfcffffff] [ 1.177754] pci_bus 0000:0c: resource 2 [mem 0xe7500000-0xe75fffff 64bit pref] [ 1.178726] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] [ 1.179884] pci_bus 0000:0d: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 1.179942] pci_bus 0000:0d: resource 2 [mem 0xe7100000-0xe71fffff 64bit pref] [ 1.180740] pci_bus 0000:0e: resource 1 [mem 0xfc700000-0xfc7fffff] [ 1.181746] pci_bus 0000:0e: resource 2 [mem 0xe6d00000-0xe6dfffff 64bit pref] [ 1.182964] pci_bus 0000:0f: resource 1 [mem 0xfc300000-0xfc3fffff] [ 1.183768] pci_bus 0000:0f: resource 2 [mem 0xe6900000-0xe69fffff 64bit pref] [ 1.185854] pci_bus 0000:10: resource 1 [mem 0xfbf00000-0xfbffffff] [ 1.186835] pci_bus 0000:10: resource 2 [mem 0xe6500000-0xe65fffff 64bit pref] [ 1.187728] pci_bus 0000:11: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 1.188938] pci_bus 0000:11: resource 2 [mem 0xe6100000-0xe61fffff 64bit pref] [ 1.189716] pci_bus 0000:12: resource 1 [mem 0xfb700000-0xfb7fffff] [ 1.190697] pci_bus 0000:12: resource 2 [mem 0xe5d00000-0xe5dfffff 64bit pref] [ 1.190729] pci_bus 0000:13: resource 0 [io 0x6000-0x6fff] [ 1.191881] pci_bus 0000:13: resource 1 [mem 0xfd200000-0xfd2fffff] [ 1.192723] pci_bus 0000:13: resource 2 [mem 0xe7800000-0xe78fffff 64bit pref] [ 1.193790] pci_bus 0000:14: resource 0 [io 0xa000-0xafff] [ 1.194990] pci_bus 0000:14: resource 1 [mem 0xfce00000-0xfcefffff] [ 1.195749] pci_bus 0000:14: resource 2 [mem 0xe7400000-0xe74fffff 64bit pref] [ 1.195781] pci_bus 0000:15: resource 0 [io 0xe000-0xefff] [ 1.196768] pci_bus 0000:15: resource 1 [mem 0xfca00000-0xfcafffff] [ 1.196800] pci_bus 0000:15: resource 2 [mem 0xe7000000-0xe70fffff 64bit pref] [ 1.197981] pci_bus 0000:16: resource 1 [mem 0xfc600000-0xfc6fffff] [ 1.198013] pci_bus 0000:16: resource 2 [mem 0xe6c00000-0xe6cfffff 64bit pref] [ 1.198758] pci_bus 0000:17: resource 1 [mem 0xfc200000-0xfc2fffff] [ 1.199698] pci_bus 0000:17: resource 2 [mem 0xe6800000-0xe68fffff 64bit pref] [ 1.200942] pci_bus 0000:18: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.201736] pci_bus 0000:18: resource 2 [mem 0xe6400000-0xe64fffff 64bit pref] [ 1.202727] pci_bus 0000:19: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.203851] pci_bus 0000:19: resource 2 [mem 0xe6000000-0xe60fffff 64bit pref] [ 1.204731] pci_bus 0000:1a: resource 1 [mem 0xfb600000-0xfb6fffff] [ 1.205760] pci_bus 0000:1a: resource 2 [mem 0xe5c00000-0xe5cfffff 64bit pref] [ 1.206990] pci_bus 0000:1b: resource 0 [io 0x7000-0x7fff] [ 1.207705] pci_bus 0000:1b: resource 1 [mem 0xfd100000-0xfd1fffff] [ 1.207737] pci_bus 0000:1b: resource 2 [mem 0xe7700000-0xe77fffff 64bit pref] [ 1.209883] pci_bus 0000:1c: resource 0 [io 0xb000-0xbfff] [ 1.210732] pci_bus 0000:1c: resource 1 [mem 0xfcd00000-0xfcdfffff] [ 1.211693] pci_bus 0000:1c: resource 2 [mem 0xe7300000-0xe73fffff 64bit pref] [ 1.212998] pci_bus 0000:1d: resource 1 [mem 0xfc900000-0xfc9fffff] [ 1.213754] pci_bus 0000:1d: resource 2 [mem 0xe6f00000-0xe6ffffff 64bit pref] [ 1.214758] pci_bus 0000:1e: resource 1 [mem 0xfc500000-0xfc5fffff] [ 1.215942] pci_bus 0000:1e: resource 2 [mem 0xe6b00000-0xe6bfffff 64bit pref] [ 1.216703] pci_bus 0000:1f: resource 1 [mem 0xfc100000-0xfc1fffff] [ 1.217704] pci_bus 0000:1f: resource 2 [mem 0xe6700000-0xe67fffff 64bit pref] [ 1.218918] pci_bus 0000:20: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 1.219690] pci_bus 0000:20: resource 2 [mem 0xe6300000-0xe63fffff 64bit pref] [ 1.220688] pci_bus 0000:21: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.221848] pci_bus 0000:21: resource 2 [mem 0xe5f00000-0xe5ffffff 64bit pref] [ 1.221880] pci_bus 0000:22: resource 1 [mem 0xfb500000-0xfb5fffff] [ 1.222694] pci_bus 0000:22: resource 2 [mem 0xe5b00000-0xe5bfffff 64bit pref] [ 1.224205] NET: Registered protocol family 2 [ 1.226191] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 1.227863] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.228727] TCP: Hash tables configured (established 32768 bind 32768) [ 1.229903] TCP: reno registered [ 1.230731] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.230844] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.232027] NET: Registered protocol family 1 [ 1.232736] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.234015] pci 0000:00:0f.0: Boot video device [ 1.234918] PCI: CLS mismatch (32 != 64), using 64 bytes [ 1.401804] Trying to unpack rootfs image as initramfs... [ 1.432994] Freeing initrd memory: 18572k freed [ 1.436699] redpill: module verification failed: signature and/or required key missing - tainting kernel This may be a very stupid mistake, I apologise for it in any case, I'm willing to look for a solution. Thanks Quote Link to comment Share on other sites More sharing options...
recoco Posted January 15, 2022 Share #254 Posted January 15, 2022 Hi, everyone, I can boot from the USB or from vm disk(sata0). But both stop at "boot tinycore for loader creation". I'm installing it on Proxmox vm. I had installed 6.2.3 successfully before which is running smoothly. What should I do? Thanks. BTW, I found that there is a bug in UEFI bios vm which can not boot tinycore loader. After changing the bios from UEFI to Seabios, the tinycore loader boots successfully using USB or vm disk(sata0). Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 15, 2022 Share #255 Posted January 15, 2022 (edited) Running build for ds3617xs and is currently trying to download the pat file but not getting any. Just the time spent going. Has the link changed? Thanks Update: Confirmed link is currently down. Found global link https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3617xs_42218.pat Edit config.json /home/tc/redpill-load/config/DS3617xs/7.0.1-42218/config.json Download was successful Edited January 15, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 15, 2022 Share #256 Posted January 15, 2022 (edited) Was able to boot with the ds3617xs bootloader. I'm using it as I have a h310 I don't think it's flashed to it mode. Anyway, when running listmods it detects the sata controller but it's trying to load tg3 which is for the nic card. I also ran dmesg and I don't see SAS driver being loaded. How can I add to the script to include the SAS driver/module? Running this on Dell Poweredge T320 raid card h310. Update: sudo ./rploader.sh ext broadwell-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json Update: Boot, but still couldn't find the disks. Will try another ext. When I do satamap I'm only getting HBA: 00:1f.2 SataPortMap=6 and DiskIdxMap=00 I believe there are 6 sata ports that don't have anything connection, but I need it to see the h310 card. Edited January 15, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 15, 2022 Share #257 Posted January 15, 2022 It helps if your using the right module megaraid_sas for h310. Now the next problem, every file I try to install is corrupted. I didn't do the satamap this time. Quote Link to comment Share on other sites More sharing options...
keasee Posted January 15, 2022 Share #258 Posted January 15, 2022 Hello Community! Any ideas to add a missing NVMe SSD to DSM7? my internal sata ssd is found, but the additional internal NVMe will not be found (BIOS is ok, and we can find it by lspci my disk parameters on grub are : sataportmap = 00 diskidxmap = 4 ash-4.4# lspci -nnq 0000:00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [8086:190f] (rev 07) 0000:00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) 0000:00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) 0000:00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem [8086:a131] (rev 31) 0000:00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31) 0000:00:17.0 SATA controller [0106]: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] (rev 31) 0000:00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 [8086:a114] (rev f1) 0000:00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #10 [8086:a119] (rev f1) 0000:00:1f.0 ISA bridge [0601]: Intel Corporation H110 Chipset LPC/eSPI Controller [8086:a143] (rev 31) 0000:00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31) 0000:00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller [8086:a170] (rev 31) 0000:00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31) 0000:01:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller 980 [144d:a809] 0000:02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) 0001:07:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:08:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:09:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:0a:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 15, 2022 Author Share #259 Posted January 15, 2022 3 hours ago, Dvalin21 said: Was able to boot with the ds3617xs bootloader. I'm using it as I have a h310 I don't think it's flashed to it mode. Anyway, when running listmods it detects the sata controller but it's trying to load tg3 which is for the nic card. I also ran dmesg and I don't see SAS driver being loaded. How can I add to the script to include the SAS driver/module? Running this on Dell Poweredge T320 raid card h310. Update: sudo ./rploader.sh ext broadwell-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json Update: Boot, but still couldn't find the disks. Will try another ext. When I do satamap I'm only getting HBA: 00:1f.2 SataPortMap=6 and DiskIdxMap=00 I believe there are 6 sata ports that don't have anything connection, but I need it to see the h310 card. can you share your lspci - nnq ? Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 15, 2022 Share #260 Posted January 15, 2022 As requestedSent from my HD1925 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 15, 2022 Share #261 Posted January 15, 2022 On 1/12/2022 at 2:35 PM, Kaneske said: @pocopicoforgive me if I´m not that firm in Shell... Starting this, ends in Terminal in my IPMI or ESXI... tc@box$: There is no GUI, what am I doing wrong. Read your Instructions ten times...tried to: passwd tc "old Password:"... I don't know. Cannot get this startet, sorry for asking maybe basics tc@ip address enter then the P@ssw0rd Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 15, 2022 Share #262 Posted January 15, 2022 (edited) 11 hours ago, pocopico said: can you share your lspci - nnq ? Sorry, Im sure this will be a bit better. Thanks in advance. lspci -nnq Also ran lspci -vmmnn Slot: 08:00.0 Class: RAID bus controller [0104] Vendor: LSI Logic / Symbios Logic [1000] Device: MegaRAID SAS 2008 [Falcon] [0073] SVendor: Dell [1028] SDevice: PERC H310 Adapter [1f4e] Rev: 03 lspci -v 08:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) Subsystem: Dell PERC H310 Adapter Flags: bus master, fast devsel, latency 0, IRQ 15 I/O ports at fc00 [size=256] Memory at dcffc000 (64-bit, non-prefetchable) [size=16K] Memory at dcf80000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at dc000000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [68] Express Endpoint, MSI 00 Capabilities: [d0] Vital Product Data Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [c0] MSI-X: Enable- Count=15 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Power Budgeting <?> I also found this when I ran lspci -v 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04fa Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 36 I/O ports at ece8 [size=8] I/O ports at ecf8 [size=4] I/O ports at ecf0 [size=8] I/O ports at ecfc [size=4] I/O ports at ecc0 [size=32] Memory at df0ff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci Im wondering if I should change the sata function from ahci to something else? (There's a few other selections and I can't remember what they are) Edited January 15, 2022 by Dvalin21 Added information Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 16, 2022 Share #263 Posted January 16, 2022 (edited) @pocopicoI have sucessfully installed 7.0.1-42218 bromwell (3615xs)with tiny pill and everything works, and it migrated my 32tb raid 10 without issue. When trying to use the broadwell 7.0.1-42218(3617xs) image, it boots but does not find network cards. So I did ifconfig from diskstation shell and indeed nothing shows up but loop 127.0...etc. This is on the exact same setup that 3615 runs on. It has a 4 port broadcom gigabit adapters(bnx3) ,10gbe broadcom, and mellanox connectx 3 in the chassis. lspci.txt Edited January 16, 2022 by g4sho Clarification Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 16, 2022 Share #264 Posted January 16, 2022 1 hour ago, g4sho said: @pocopicoI have sucessfully installed 7.0.1-42218 bromwell (3615xs)with tiny pill and everything works, and it migrated my 32tb raid 10 without issue. When trying to use the broadwell 7.0.1-42218(3617xs) image, it boots but does not find network cards. So I did ifconfig from diskstation shell and indeed nothing shows up but loop 127.0...etc. This is on the exact same setup that 3615 runs on. It has a 4 port broadcom gigabit adapters(bnx) ,10gbe broadcom, and mellanox connectx 3 in the chassis. lspci.txt 24.17 kB · 1 download Appendum: I stated earlier that everything worked on 3615xs, I since found that the 10gbe broadcom adapter driver is not working(Bnx2x). lsmod shows it is loaded with no dependency usage. 04:00.0 and 04:00.1 is address. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 16, 2022 Share #265 Posted January 16, 2022 Appendum: I stated earlier that everything worked on 3615xs, I since found that the 10gbe broadcom adapter driver is not working(Bnx2x). lsmod shows it is loaded with no dependency usage. 04:00.0 and 04:00.1 is address.Quick question, what is your satamap set to? Working on ds3617xs myselfSent from my HD1925 using Tapatalk Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 16, 2022 Share #266 Posted January 16, 2022 1 hour ago, Dvalin21 said: Quick question, what is your satamap set to? Working on ds3617xs myself Sent from my HD1925 using Tapatalk I left it at the default setting of user_config.json which is SataPortMap": "58", "DiskIdxMap": "0A00" I have a 12 sas drive raid 10 on a 16 port card. Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 16, 2022 Author Share #267 Posted January 16, 2022 14 hours ago, Dvalin21 said: Sorry, Im sure this will be a bit better. Thanks in advance. lspci -nnq 7.84 kB · 3 downloads Also ran lspci -vmmnn Slot: 08:00.0 Class: RAID bus controller [0104] Vendor: LSI Logic / Symbios Logic [1000] Device: MegaRAID SAS 2008 [Falcon] [0073] SVendor: Dell [1028] SDevice: PERC H310 Adapter [1f4e] Rev: 03 lspci -v 08:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) Subsystem: Dell PERC H310 Adapter Flags: bus master, fast devsel, latency 0, IRQ 15 I/O ports at fc00 [size=256] Memory at dcffc000 (64-bit, non-prefetchable) [size=16K] Memory at dcf80000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at dc000000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [68] Express Endpoint, MSI 00 Capabilities: [d0] Vital Product Data Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [c0] MSI-X: Enable- Count=15 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Power Budgeting <?> I also found this when I ran lspci -v 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04fa Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 36 I/O ports at ece8 [size=8] I/O ports at ecf8 [size=4] I/O ports at ecf0 [size=8] I/O ports at ecfc [size=4] I/O ports at ecc0 [size=32] Memory at df0ff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci Im wondering if I should change the sata function from ahci to something else? (There's a few other selections and I can't remember what they are) You LSI card is a megaraid sas. You need megaraid_sas extension. Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 16, 2022 Author Share #268 Posted January 16, 2022 (edited) 4 hours ago, g4sho said: Appendum: I stated earlier that everything worked on 3615xs, I since found that the 10gbe broadcom adapter driver is not working(Bnx2x). lsmod shows it is loaded with no dependency usage. 04:00.0 and 04:00.1 is address. From the list it looks that you need bnx2x and tg3 extensions. I had a look at the 3617xs extension and it looks that the bnx2x might not satisfy all dependencies. I will check and update. Edited January 16, 2022 by pocopico OK ! Please recreate the 3617xs loader including bnx2x and retry Quote Link to comment Share on other sites More sharing options...
icehq Posted January 16, 2022 Share #269 Posted January 16, 2022 Hi. I am new to Xpenology, but got interested in this project. According to the video on YT Sabrine - I prepared and downloaded an img file that I made on RedPill. I used Proxmox for this, in the latest version - 7.1.8. What is the next step to run Xpenology? As I created a new VM, gave 4c and ram, I substituted qm importdisk 101 /var/lib/vz/dump/loader.img local-lvmci for the disk, I started the VM but it stopped booting the kernel. I probably skipped some steps. Someone will direct me? Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 16, 2022 Author Share #270 Posted January 16, 2022 2 minutes ago, icehq said: Hi. I am new to Xpenology, but got interested in this project. According to the video on YT Sabrine - I prepared and downloaded an img file that I made on RedPill. I used Proxmox for this, in the latest version - 7.1.8. What is the next step to run Xpenology? As I created a new VM, gave 4c and ram, I substituted qm importdisk 101 /var/lib/vz/dump/loader.img local-lvmci for the disk, I started the VM but it stopped booting the kernel. I probably skipped some steps. Someone will direct me? Sure, @haydibe has included all required steps for creating a VM in proxmox and here are the latest. Dont use the GUI to create the VM like i did in the begining. Just use 1:1 the instructions below 1 Quote Link to comment Share on other sites More sharing options...
icehq Posted January 16, 2022 Share #271 Posted January 16, 2022 1 hour ago, pocopico said: Sure, @haydibe has included all required steps for creating a VM in proxmox and here are the latest. Dont use the GUI to create the VM like i did in the begining. Just use 1:1 the instructions below That was this, now it's working. Best regards. Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 16, 2022 Share #272 Posted January 16, 2022 Ok, unlikely doubled, but its driving me Nuts... TinyCore suggested me MPT3 for my SAS Control: 0000:04:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) But "no Disks attached" pop up if I boot the Stick. 3615XS image. Anybody got a hint, what extension is needed for my HBA? *sorry for posting here too, was already in main Thread* Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 16, 2022 Share #273 Posted January 16, 2022 (edited) 2 hours ago, pocopico said: From the list it looks that you need bnx2x and tg3 extensions. I had a look at the 3617xs extension and it looks that the bnx2x might not satisfy all dependencies. I will check and update. @pocopicoSounds good, I thought so, so I tried to compile the drivers for the first time myself, and succeded with broadwell. But have no clue how to get them into tinypill. I am familiar with the file structure of normal synoboot.img but I still feel pretty good that I could get this far, lol. Thanks again Edited January 16, 2022 by g4sho Quote Link to comment Share on other sites More sharing options...
GeriHDHUN Posted January 16, 2022 Share #274 Posted January 16, 2022 (edited) Deleted Edited January 16, 2022 by GeriHDHUN Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 16, 2022 Author Share #275 Posted January 16, 2022 37 minutes ago, GeriHDHUN said: Hello everyone I have this problem with 1.03B loader with DSM 6.2 3615XS No hard disk found... The Hard Disks [2x8 TB ironwolf] connected directly to the motherboard with sata cable. Processor : Intel Pentium E5400 Motherboard : Gigabyte GA-G41M-ES2L Any idea whats the problem? Thanks! Sorry for asking but is this related to Tinycore Redpill ? If not, please delete and repost on another thread Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.