Polanskiman

Please read the READ ME topic before posting:

 

Message added by Polanskiman

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.03b - DS3615

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7u2 with LSI 9211-8 on Dell T30

- Additional comments: Reboot required, vNICs had been E1000e before, so problem at all. Addition vmdk on SATA1:0 was missing as synoinfo.cfg was replaced by a default file. This time I fixed it permanently by setting DiskIdxMap in the grub.cfg, so it won't become a problem on the next major or minor update.

 

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.03b - DS3615

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7u2 on Dell T30

- Additional comments: Reboot required, vNICs had been E1000e before, so problem at all.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7u2 on Supermicro X9SRH

- Additional comments: Reboot required, all disks as RDM on 2nd SATA controller.

Share this post


Link to post
Share on other sites

Outcome of the update: FAILED

DSM version prior to update: DSM 6.2.1-23824U6

Loader version and model: Jun v1.04b - DS918

Using custom extra.lzma: NO

Installation type:  BAREMETAL - Asrock J3160DC-ITX

Additional comments: No network after Reboot.

Share this post


Link to post
Share on other sites
Posted (edited)

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7u2 on Supermicro X11SPM

- Additional comments: Manual update, reboot. Disk as VMDK on VMware Paravirtual SCSI controller.

Edited by fafner

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824U6

- Loader version and model: Jun's loader v1.03b, DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP MicroServer Gen10

- Additional comments: Internal NIC disabled, added a HP NC360T dual port NIC.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's loader v1.03b, DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7 U2 13473784 on Microserver Gen8

- Additional comments: Dell H200 @LSI Controller in passthrough, NIC set to e1000e.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Gen8 Microserver

- Additional comment: internal NIC disabled and compatible Intel PCIe NIC installed

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: Jun v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ASRock Z370M-ITXac (built-in WiFi card removed) + i3-8100T

- Additional comments: reboot by itself

Share this post


Link to post
Share on other sites

- Outcome of the installation/update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC (restart by Manual)

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Gen8 Microserver

- Additional comment: Internal NIC disabled, added a HP NC360T dual port NIC.

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM v6.2-23739-2

- Loader version and model: Jun Loader v1.03b - DS3615

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox 5.4-3 (HP GEN8 G1610T)

- Additional comments: Changed LAN from e1000 to e1000e

Share this post


Link to post
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: New VM (no prior installation). Running DS918+_6.2.2-24922
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: VM - Virtual box - Test setup on a 2015 MacBookPro 2.2 GHz i7, Intel Iris Pro 1536MB
- Additional comments: Had to use the following network mac address to connect to web gui: 001132123456

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL
- DSM version prior update: DSM 6.2.1-23824U6
- Loader version and model: Jun's Loader v1.04b DS918+
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 6.7u2 with LSI 9211-8, E1000e
- Additional comments: Reboot required, bootloader modified sata_arg, no modification on synoinfo.cfg.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J4105-ITX

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED
- DSM version prior update: DSM v6.2-23739
- Loader version and model: Jun Loader v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - VMware Workstation 14.0
- Additional comments: No auto reboot during update via GUI. No boot to DSM both console and GUI after manual reboot(reset)

 

- Outcome of the installation: FAILED
- DSM version prior update: new Installation DSM_DS3615xs_24922.pat
- Loader version and model: Jun Loader v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - VMware Workstation 14.0
- Additional comments: No auto reboot during install via GUI. No boot to DSM both console and GUI after manual reboot(reset)

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  ASRock H270M-ITX/ac

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.7 UPDATE 3 - JUN'S LOADER v1.02b DS3615xs
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Compaq Elite 8300 SFF , integrated Intel 82579LM NIC

- Additional comments: JUN'S LOADER v1.03b Hybrid partition table usb key created, UEFI boot disabled in BIOS

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED (if no monitor connected)

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional comments: I should say the 6.2.2 is working only if my VGA monitor is connected (regardless if it's power on/off). No HW transcoding available in 6.2.2 in this case. If moditor is disconnected, DSM won't start.

 

 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

- Outcome of the install: FAILED

- DSM version prior to update: DSM 6.2.1-23824 U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - e3-1220v3 / 16GB / LSI 9220-8i IT 

- Additional comments: Error 13 when attempting to install to test HDD "multiple USB drives used with correct VID/PID, multiple test drives, two S/N"

 

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824 U6

- Loader version and model: Jun Loader v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - e3-1220v3 / 16GB / LSI 9220-8i IT

- Additional comments: Upgraded to 6.2.2 but no ping after reboot

 

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.2-224922

- Loader version and model: Jun Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - e3-1220v3 / 16GB / LSI 9220-8i IT

- Additional comments: After changing to DS3615xs loader, install detected the DS3617xs installation and migrated successfully

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL Optiplex 3020 i3-4160, 4G DDR3 1600MHz, 1TB 7200RPM
- Additional comment: boot with udisk

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.03b - DS3615

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox 5.4-3

- Additional comments: Changed LAN from e1000 to e1000e

Share this post


Link to post
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte B75M-D3H - Intel E3-1245v2 - Mellanox ConnectX-2 MNPA19-XTR

- Additional comments: No internet after upgrade.

 

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte B75M-D3H - Intel E3-1245v2 - Intel X520-T2

- Additional comments: No internet after upgrade.

 

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte B75M-D3H - Intel E3-1245v2 - Mellanox ConnectX-3 MCX311A-XCAT

- Additional comments: No internet after upgrade.

 

- Outcome of the install: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte B75M-D3H - Intel E3-1245v2 - Mellanox ConnectX-3 MCX311A-XCAT

- Additional comments: Change the loader to DS3615xs and migrate from DS3617xs

 

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J3160-ITX

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455

- Additional comments: Onboard lan not tested, all ok with PCIE Intel NIC.

Share this post


Link to post
Share on other sites

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X10SL7-F-0 with both SATA (6 ports) and SAS (8 ports - LSI2308) and dual onboard Intel (i210AT) NICs.

- Additional comments: fastest System update ever; seems to be operating normally; also updated several of the apps that were showing as outdated.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.