s3urat

Transition Members
  • Content Count

    11
  • Joined

  • Last visited

Community Reputation

0 Neutral

About s3urat

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. It's strange, yeah. The heatsink is too hot to touch, when the server shuts down. I am running some 6 Docker containers, but, apart from PiHole, they don't do much of anything. I've rigged a small cooler on the heatsink. Maybe it'll help.
  2. Apparently the CPU gets too hot, the termal protection kicks in and the server shuts down. Looking at the system temperature status in the Control Panel it reads as normal/~33ºC (the BIOS has the CPU temperature at 60ºC+, however).
  3. Well, apparently it's working, thanks @djvas335. Now on to solving the server's thermal problems .
  4. Just a heads up: for me the problems reoccured after a day or two and I downgraded to 6.1. Perhaps I have a defective network card or perhaps it is an incompatibility with the GEN10 Microservers, since it appears to work with the N54L variants, I don't know. It would be nice if a GEN10 owner would chime in :).
  5. You just type pcie_aspm=off (or maybe pcie_aspm=0? I couldn't find much useful information) at the end of set common_args_3615='...' Something like this: set common_args_3615='disable_mtrr_trim syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 pcie_aspm=off' Note that it didn't do anything for the problems I had.
  6. Yes. Downgrade to DSM 6.1 and use the built in network.
  7. I'll repost the question here, since I didn't get any info on the post installation subforum. Anyone else experienced this? I've got an HP Microserver gen10, an HP NC360T NIC and DSM 6.2.2-24922. Ever since the upgrade from 6.1 to 6.2 the system will drop of off the network about once a week. Sometimes when adding large torrents to the download station (but maybe that's just a coincidence). Apparently it happens because the network card stops/resets and the dhcp-client can't (or won't) start again. Relevant portion from /var/log/messages: 2019-05-15T13:23:52+02:00 diskstation [228138.340179] init: dhcp-client (eth0) main process (8937) killed by TERM signal 2019-05-15T13:23:52+02:00 diskstation dhcp-client: stopped on eth0 2019-05-15T13:23:52+02:00 diskstation dhcp-client: started on eth0 2019-05-15T13:23:52+02:00 diskstation synonetd: net_default_gateway_set.c:34 failed to set default gateway Found in /var/log/kern.log: 2019-05-15T17:47:58+02:00 diskstation kernel: [15716.768357] e1000e 0000:02:00.0 eth0: Reset adapter unexpectedly After some Googling (especially this discussion), the solution would seem to be an upgrade of the e1000e drivers and/or disabling ASPM (PCIe Active State Power Management). I've added "pcie_aspm=off" to common_args_3615 in my grub.cfg but it didn't help. I've since downgraded to DSM 6.1 but the problem still bugs me.
  8. So, apparently it happens because the network card stops/resets and the dhcp-client can't (or won't) start again. Relevant portion from /var/log/messages: 2019-05-15T13:23:52+02:00 diskstation [228138.340179] init: dhcp-client (eth0) main process (8937) killed by TERM signal 2019-05-15T13:23:52+02:00 diskstation dhcp-client: stopped on eth0 2019-05-15T13:23:52+02:00 diskstation dhcp-client: started on eth0 2019-05-15T13:23:52+02:00 diskstation synonetd: net_default_gateway_set.c:34 failed to set default gateway Found in /var/log/kern.log: 2019-05-15T17:47:58+02:00 diskstation kernel: [15716.768357] e1000e 0000:02:00.0 eth0: Reset adapter unexpectedly After some Googling (especially this discussion), the solution would seem to be an upgrade of the e1000e drivers and/or disabling ASPM (PCIe Active State Power Management). I've added "pcie_aspm=off" to common_args_3615 in my grub.cfg. We'll see how it goes.
  9. Anyone else experienced this? I've got an HP Microserver gen10, an HP NC360T NIC and DSM 6.2.2-24922. Ever since the upgrade from 6.1 to 6.2 the system will drop of off the network about once a week. Sometimes when adding large torrents to the download station (but maybe that's only coincidence). Is there any way to diagnose this? Any system logs besides the Log Center? The only abnormality I'm able to see in the Log Center is that LAN 1 goes down and receives a 169.254.xxx.xxx IP, like the cable was disconnected. It stays like that indefinely.
  10. - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824U6 - Loader version and model: Jun's loader v1.03b, DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 - Additional comments: Internal NIC disabled, added a HP NC360T dual port NIC.