gnoboot

XPEnology gnoBoot

Recommended Posts

Hi,

 

I'm about to install XPEnology via gnoboot on my home-NAS.

 

I have a frew questions. (Also I might suggest, as this thread grows and grows to setup a sub-forum for gnoboot)

 

The gnoboot image goes on a usb thumb drive which probably corresponds to the "hidden" flash-boot device inside a normal synology box. The installer then installs the DSM onto the mirrored partition on all harddrives.

 

As thumb drives _will_ fail some day, I wanted to ask if it's just a read only thing and if I can restore the downloaded gnoboot image to another thumb-drive and all will be fine again?

 

Minor updates are downloaded in place and then the replacement with "sed" has to be done (why, do we need to change that string?). What about major releases. Let's say DSM 5.1 or even 6.0. Would one first update the gnoboot thumb drive and then in-place upgrade the DSM software?

 

thanks for helping out,

Dark-Sider

Share this post


Link to post
Share on other sites

hi,

can somebody help me with my wifi problem?

i have tried everything but nothing works.... ;-(

tried several drivers and files but the box still can't find the right ones

 

Synology2> dmesg | grep iwl

[ 21.531552] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-6.ucode' failed.

[ 21.539873] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-5.ucode' failed.

[ 21.539876] iwlwifi 0000:04:00.0: no suitable firmware found!

[ 21.539924] iwlwifi 0000:04:00.0: PCI INT A disabled

 

Synology2> insmod /lib/modules/iwlwifi.ko

insmod: can't insert '/lib/modules/iwlwifi.ko': unknown symbol in module, or unknown parameter

Share this post


Link to post
Share on other sites
Hi,

 

I'm about to install XPEnology via gnoboot on my home-NAS.

 

I have a frew questions. (Also I might suggest, as this thread grows and grows to setup a sub-forum for gnoboot)

 

The gnoboot image goes on a usb thumb drive which probably corresponds to the "hidden" flash-boot device inside a normal synology box. The installer then installs the DSM onto the mirrored partition on all harddrives.

 

As thumb drives _will_ fail some day, I wanted to ask if it's just a read only thing and if I can restore the downloaded gnoboot image to another thumb-drive and all will be fine again?

 

Minor updates are downloaded in place and then the replacement with "sed" has to be done (why, do we need to change that string?). What about major releases. Let's say DSM 5.1 or even 6.0. Would one first update the gnoboot thumb drive and then in-place upgrade the DSM software?

 

thanks for helping out,

Dark-Sider

 

You can just replace the usb, nothing is saved on it...

Share this post


Link to post
Share on other sites

Hello everyone

I went to gnoboot 10.5 with DSM 5.0 update 2 from my tuner card no longer works.

Yet it seems to be recognized.

Do you have any ideas ?

 

Thank

 

dmesg | grep dvb

[ 17.096996] Em28xx: Initialized (Em28xx dvb Extension) extension

[ 17.352277] cx88/2: cx2388x dvb driver version 0.0.9 loaded

[ 17.352279] cx88/2: registering cx8802 driver, type: dvb access: shared

[ 17.393098] usbcore: registered new interface driver dvb_usb_technisat_u

[ 17.422743] usbcore: registered new interface driver dvb_usb_nova_t_usb2

 

dmesg | grep pvr

[ 16.873152] usbcore: registered new interface driver hdpvr

[ 17.364406] usbcore: registered new interface driver pvrusb2

[ 17.364408] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2

 

dmesg | grep usb

[ 10.269240] usbcore: registered new interface driver usbfs

[ 10.270454] usbcore: registered new interface driver hub

[ 10.272049] usbcore: registered new interface driver ethub

[ 10.274092] usbcore: registered new device driver usb

[ 14.611075] usbcore: registered new interface driver usb-storage

[ 14.668036] usb 1-2: new high-speed USB device number 2 using ehci_hcd

[ 14.672991] usbcore: registered new interface driver usblp

[ 14.789557] usbcore: registered new interface driver usbhid

[ 14.789559] usbhid: USB HID core driver

[ 15.352480] scsi6 : usb-storage 1-2:1.0

[ 15.478018] usb 1-3: new high-speed USB device number 3 using ehci_hcd

[ 15.615572] scsi7 : usb-storage 1-3:1.0

[ 15.796220] usbcore: registered new interface driver snd-usb-audio

[ 16.000117] usbcore: registered new interface driver ttusb

[ 16.363369] syno_disk_type_get: disk driver 'usb-storage'

[ 16.379053] syno_disk_type_get: disk driver 'usb-storage'

[ 16.401338] syno_disk_type_get: disk driver 'usb-storage'

[ 16.432879] syno_disk_type_get: disk driver 'usb-storage'

[ 16.873152] usbcore: registered new interface driver hdpvr

[ 16.939057] syno_disk_type_get: disk driver 'usb-storage'

[ 17.018708] usbcore: registered new interface driver em28xx

[ 17.364406] usbcore: registered new interface driver pvrusb2

[ 17.364408] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner

[ 17.364410] pvrusb2: Debug mask is 31 (0x1f)

[ 17.374461] usbcore: registered new interface driver ttusb-dec

[ 17.382248] usbcore: registered new interface driver cinergyT2

[ 17.387710] usbcore: registered new interface driver pctv452e

[ 17.393098] usbcore: registered new interface driver dvb_usb_technisat_usb2

[ 17.422743] usbcore: registered new interface driver dvb_usb_nova_t_usb2

[10815.981033] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[17142.394027] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[21822.987035] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[34950.028028] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[47959.649036] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[56582.981035] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[64712.588025] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[69138.294036] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

Share this post


Link to post
Share on other sites

Hello!

I've installed XPEnology gnoBoot on my HP Microserver G7 N54 over ESXi 5.

All right, but my speed of copying on XPEnology is very slow (at beginning over 60 Mbs, after that it go lower to 5 Mbs). If I install XPEnology as real OS on my disk speed of copying files into Microserver over 110 Mbs.

If you have got same scheme can you provide me your speed.

At this moment I will try installing another hypervisor (Proxmox) and test XPEnology on it.

Can it be some troubles with configuration of ESXi and problem can be solved by fixing it ?

Thanks!

Share this post


Link to post
Share on other sites
Hello!

I've installed XPEnology gnoBoot on my HP Microserver G7 N54 over ESXi 5.

All right, but my speed of copying on XPEnology is very slow (at beginning over 60 Mbs, after that it go lower to 5 Mbs). If I install XPEnology as real OS on my disk speed of copying files into Microserver over 110 Mbs.

If you have got same scheme can you provide me your speed.

At this moment I will try installing another hypervisor (Proxmox) and test XPEnology on it.

Can it be some troubles with configuration of ESXi and problem can be solved by fixing it ?

Thanks!

 

have a look at ESXi thread - i think there was a discussion or several posts at least on pvscsi, RDM and pass-through speeds

Share this post


Link to post
Share on other sites
At beginning over 60 Mbs, after that it go lower to 5 Mbs. If I install XPEnology as real OS on my disk speed of copying files into Microserver over 110 Mbs.

I got same results. I found out that the RDM solution makes the access to HDD much slower comparing to the VMDK-drive. In random places in this forum, I read similar results.

Currently, I decided to use XPEnology on the real device, but spend the smallest drive for ESXi needs.

Share this post


Link to post
Share on other sites
At beginning over 60 Mbs, after that it go lower to 5 Mbs. If I install XPEnology as real OS on my disk speed of copying files into Microserver over 110 Mbs.

I got same results. I found out that the RDM solution makes the access to HDD much slower comparing to the VMDK-drive. In random places in this forum, I read similar results.

Currently, I decided to use XPEnology on the real device, but spend the smallest drive for ESXi needs.

Today, I've installed ProxMox and install XPEnology in virtualmachine - I've got about 40-45 Mbs in writing on disk.

Thats much better, but i will search more to have good result. Maybe try Citrix Xen Server?

Share this post


Link to post
Share on other sites

Elgato DTT DVB-T Sick is making problems in my vm. Is a Nova-T clone I think.

System is gnoBoot alpha 10.5 with DSM 5 update 2.

Videostation didn't detect the stick.

 

Dmesg when connecting:

[  610.257488] usb 1-1: new high-speed USB device number 3 using ehci_hcd
[  611.461852] dvb_core: Unknown symbol __refrigerator (err 0)
[  611.472448] dvb_usb: Unknown symbol dvb_dmxdev_init (err 0)
[  611.472485] dvb_usb: Unknown symbol dvb_register_adapter (err 0)
[  611.472521] dvb_usb: Unknown symbol dvb_dmx_swfilter_204 (err 0)
[  611.472532] dvb_usb: Unknown symbol dvb_dmx_release (err 0)
[  611.472557] dvb_usb: Unknown symbol dvb_net_init (err 0)
[  611.472568] dvb_usb: Unknown symbol dvb_dmx_swfilter (err 0)
[  611.472580] dvb_usb: Unknown symbol dvb_dmxdev_release (err 0)
[  611.472593] dvb_usb: Unknown symbol dvb_dmx_swfilter_raw (err 0)
[  611.472604] dvb_usb: Unknown symbol dvb_frontend_detach (err 0)
[  611.472616] dvb_usb: Unknown symbol dvb_net_release (err 0)
[  611.472629] dvb_usb: Unknown symbol dvb_unregister_frontend (err 0)
[  611.472646] dvb_usb: Unknown symbol dvb_register_frontend (err 0)
[  611.472657] dvb_usb: Unknown symbol dvb_unregister_adapter (err 0)
[  611.472668] dvb_usb: Unknown symbol dvb_dmx_init (err 0)
[  611.502120] lgdt3305: Unknown symbol intlog10 (err 0)
[  611.566861] dib8000: Unknown symbol intlog10 (err 0)
[  611.566886] dib8000: Unknown symbol dvb_frontend_detach (err 0)
[  611.577642] dib9000: Unknown symbol intlog10 (err 0)
[  611.577662] dib9000: Unknown symbol dvb_frontend_detach (err 0)
[  611.588044] dib7000p: Unknown symbol intlog10 (err 0)
[  611.611631] dvb_usb_dib0700: Unknown symbol dib7000p_set_gpio (err 0)
[  611.611649] dvb_usb_dib0700: Unknown symbol dib7090_get_i2c_tuner (err 0)
[  611.611671] dvb_usb_dib0700: Unknown symbol dib7000p_get_i2c_master (err 0)
[  611.611684] dvb_usb_dib0700: Unknown symbol dvb_usb_get_hexline (err 0)
[  611.611698] dvb_usb_dib0700: Unknown symbol dib8000_set_tune_state (err 0)
[  611.611710] dvb_usb_dib0700: Unknown symbol dib9000_set_i2c_adapter (err 0)
[  611.611722] dvb_usb_dib0700: Unknown symbol dib8000_set_slave_frontend (err 0)
[  611.611734] dvb_usb_dib0700: Unknown symbol dib7090_tuner_sleep (err 0)
[  611.611752] dvb_usb_dib0700: Unknown symbol dib7090_get_adc_power (err 0)
[  611.611766] dvb_usb_dib0700: Unknown symbol dib9000_fw_pid_filter_ctrl (err 0)
[  611.611779] dvb_usb_dib0700: Unknown symbol dib7000p_update_pll (err 0)
[  611.611793] dvb_usb_dib0700: Unknown symbol dib7000pc_detection (err 0)
[  611.611805] dvb_usb_dib0700: Unknown symbol dib8000_ctrl_timf (err 0)
[  611.611817] dvb_usb_dib0700: Unknown symbol dib7000p_i2c_enumeration (err 0)
[  611.611836] dvb_usb_dib0700: Unknown symbol dib9000_fw_set_component_bus_speed (err 0)
[  611.611855] dvb_usb_dib0700: Unknown symbol dib7000p_set_wbd_ref (err 0)
[  611.611866] dvb_usb_dib0700: Unknown symbol dib8000_get_adc_power (err 0)
[  611.611878] dvb_usb_dib0700: Unknown symbol dib8096p_get_i2c_tuner (err 0)
[  611.611890] dvb_usb_dib0700: Unknown symbol dib8000_update_pll (err 0)
[  611.611902] dvb_usb_dib0700: Unknown symbol dib9000_get_tuner_interface (err 0)
[  611.611915] dvb_usb_dib0700: Unknown symbol dib8000_set_gpio (err 0)
[  611.611927] dvb_usb_dib0700: Unknown symbol dib9000_get_component_bus_interface (err 0)
[  611.611938] dvb_usb_dib0700: Unknown symbol dib9000_fw_pid_filter (err 0)
[  611.611962] dvb_usb_dib0700: Unknown symbol dib7090_slave_reset (err 0)
[  611.611973] dvb_usb_dib0700: Unknown symbol dib8000_set_wbd_ref (err 0)
[  611.611985] dvb_usb_dib0700: Unknown symbol dib7000p_pid_filter (err 0)
[  611.612005] dvb_usb_dib0700: Unknown symbol dib9000_firmware_post_pll_init (err 0)
[  611.612019] dvb_usb_dib0700: Unknown symbol dib9000_i2c_enumeration (err 0)
[  611.612031] dvb_usb_dib0700: Unknown symbol dib9000_set_slave_frontend (err 0)
[  611.612045] dvb_usb_dib0700: Unknown symbol dib9000_set_gpio (err 0)
[  611.612057] dvb_usb_dib0700: Unknown symbol dib8000_pid_filter_ctrl (err 0)
[  611.612072] dvb_usb_dib0700: Unknown symbol dib8096p_tuner_sleep (err 0)
[  611.612085] dvb_usb_dib0700: Unknown symbol dvb_usb_device_init (err 0)
[  611.612098] dvb_usb_dib0700: Unknown symbol dib8000_i2c_enumeration (err 0)
[  611.612110] dvb_usb_dib0700: Unknown symbol dvb_usb_device_exit (err 0)
[  611.612122] dvb_usb_dib0700: Unknown symbol dib7000p_set_agc1_min (err 0)
[  611.612134] dvb_usb_dib0700: Unknown symbol dib8000_get_slave_frontend (err 0)
[  611.612148] dvb_usb_dib0700: Unknown symbol dib7000p_pid_filter_ctrl (err 0)
[  611.612160] dvb_usb_dib0700: Unknown symbol dib8000_pwm_agc_reset (err 0)
[  611.612171] dvb_usb_dib0700: Unknown symbol dib8000_get_i2c_master (err 0)
[  611.612183] dvb_usb_dib0700: Unknown symbol dib9000_get_slave_frontend (err 0)
[  611.612195] dvb_usb_dib0700: Unknown symbol dib8000_pid_filter (err 0)
[  611.612206] dvb_usb_dib0700: Unknown symbol dib9000_get_i2c_master (err 0)
[  611.612218] dvb_usb_dib0700: Unknown symbol dib7000p_ctrl_timf (err 0)

 

ok, put this in my rc.local:

#!/bin/sh
source /etc/rc.subr
source /.gnoboot/modules.d/05-media.conf
SYNOLoadModules $MEDIA_MOD

 

and reached this in dmesg:

usbcore: registered new interface driver dvb_usb_dib0700

 

What now?

Edited by Guest

Share this post


Link to post
Share on other sites
Hello everyone

I went to gnoboot 10.5 with DSM 5.0 update 2 from my tuner card no longer works.

Yet it seems to be recognized.

Do you have any ideas ?

 

Thank

 

dmesg | grep dvb

[ 17.096996] Em28xx: Initialized (Em28xx dvb Extension) extension

[ 17.352277] cx88/2: cx2388x dvb driver version 0.0.9 loaded

[ 17.352279] cx88/2: registering cx8802 driver, type: dvb access: shared

[ 17.393098] usbcore: registered new interface driver dvb_usb_technisat_u

[ 17.422743] usbcore: registered new interface driver dvb_usb_nova_t_usb2

 

dmesg | grep pvr

[ 16.873152] usbcore: registered new interface driver hdpvr

[ 17.364406] usbcore: registered new interface driver pvrusb2

[ 17.364408] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2

 

dmesg | grep usb

[ 10.269240] usbcore: registered new interface driver usbfs

[ 10.270454] usbcore: registered new interface driver hub

[ 10.272049] usbcore: registered new interface driver ethub

[ 10.274092] usbcore: registered new device driver usb

[ 14.611075] usbcore: registered new interface driver usb-storage

[ 14.668036] usb 1-2: new high-speed USB device number 2 using ehci_hcd

[ 14.672991] usbcore: registered new interface driver usblp

[ 14.789557] usbcore: registered new interface driver usbhid

[ 14.789559] usbhid: USB HID core driver

[ 15.352480] scsi6 : usb-storage 1-2:1.0

[ 15.478018] usb 1-3: new high-speed USB device number 3 using ehci_hcd

[ 15.615572] scsi7 : usb-storage 1-3:1.0

[ 15.796220] usbcore: registered new interface driver snd-usb-audio

[ 16.000117] usbcore: registered new interface driver ttusb

[ 16.363369] syno_disk_type_get: disk driver 'usb-storage'

[ 16.379053] syno_disk_type_get: disk driver 'usb-storage'

[ 16.401338] syno_disk_type_get: disk driver 'usb-storage'

[ 16.432879] syno_disk_type_get: disk driver 'usb-storage'

[ 16.873152] usbcore: registered new interface driver hdpvr

[ 16.939057] syno_disk_type_get: disk driver 'usb-storage'

[ 17.018708] usbcore: registered new interface driver em28xx

[ 17.364406] usbcore: registered new interface driver pvrusb2

[ 17.364408] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner

[ 17.364410] pvrusb2: Debug mask is 31 (0x1f)

[ 17.374461] usbcore: registered new interface driver ttusb-dec

[ 17.382248] usbcore: registered new interface driver cinergyT2

[ 17.387710] usbcore: registered new interface driver pctv452e

[ 17.393098] usbcore: registered new interface driver dvb_usb_technisat_usb2

[ 17.422743] usbcore: registered new interface driver dvb_usb_nova_t_usb2

[10815.981033] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[17142.394027] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[21822.987035] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[34950.028028] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[47959.649036] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[56582.981035] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[64712.588025] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

[69138.294036] usb 1-2: reset high-speed USB device number 2 using ehci_hcd

 

Should I place the tuner firmware in '/usr/syno/hotplug/firmware' ?

 

firmware : dvb-usb-dib0700-1.20.fw

Share this post


Link to post
Share on other sites

I'm new to gnoboot...

 

So every time I reboot the box I have to manually enter the 2 items (.me choice and the DSM 5 choice)? I have a monitor-less setup so are there any other ways to get around that?

Share this post


Link to post
Share on other sites

I am currently using a HP 54L and running synology 4.3-3810. I am using iSCSI with my windows 2012 server and running 5 or so hyper-v machines. If I update to DSM 5.0 update 2 is iSCSI working properly? I have searched the forum and posts but I can't get a confirmation if iSCSI works on the latest version.

 

Thanks

Share this post


Link to post
Share on other sites

Functon missing : USBSD copy or SD copy

 

as the org. DSM 5.0 got those function.

fi so I could use it to copy mine sd photos into it ...

Share this post


Link to post
Share on other sites
Functon missing : USBSD copy or SD copy

 

as the org. DSM 5.0 got those function.

fi so I could use it to copy mine sd photos into it ...

 

1. DS3612xs do not have SD Card Reader

2. to facilitate SD copy, you need a Copy Button, non-real synology hardware do not has such thing, even you cannot use the power button to shutdown the NAS, because the kernel do not have the interface can read its status

 

does it make sense to you

Share this post


Link to post
Share on other sites

Hi !

I'm successfully install gnoboot 10.4 on Readynas pro 2 ( thank's Gnoboot for you work ) but any buttons and led status work.

Led disk status is userless, but copy and reset buttons is a little userfully

Original netgear kernel has a special module call nv6gpio.ko who "talk's" whit led and buttons. Is is possible compile it from src file and "inject" to gnoboot kernel ?

I have source code this original module :smile:

P.S.

sorry for my english :smile:

Share this post


Link to post
Share on other sites
Updated to 10.5

 

Tried adding SSD cache

 

Still the same problem :sad:

 

SKW-SAN> tail -f /var/log/messages

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth1 10.3.0.4 is Active

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth2 172.16.2.1 is Active

Apr 7 20:58:37 SKW-SAN kernel: [ 632.060284] EXT_INFO: INIT Extent-Pool

Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: flashcachehandler.cpp:238 Failed to create flashcache on /volume1 [0xEB00 servicec fg_internal_lib.c:104]

Apr 7 20:58:40 SKW-SAN kernel: [ 634.627242] md: md4: set sdf1 to auto_remap [0]

Apr 7 20:58:40 SKW-SAN kernel: [ 634.627243] md: md4: set sde1 to auto_remap [0]

Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: raid_remove.c:48 [info] clean RAID superblock of /dev/md4

Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sde1'

Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sdf1'

Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add

Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.

Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add

Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.

 

Haven't looked into it :lol: .

 

Hello,

 

with 10.5 my PERC310 (8 SATA/SAS-Port Controller) doesnt work, the Volume is not showing up...with 10.4 it works great...PLS Help :smile:

I´ve created the Volume in the BIOS settings (4 SAS Drives / 1 Volume) so i dont have to create an Software-Raid in the DSM.

I'm using 9211-8i and it works (IR mode) for me on ESXi+vt-d. Are you using baremetal or vt-d? Doesn't show in DSM or doesn't detect the disk?

 

*

For me i have always problem with Realtek network card 10DE:8136 rev=02 ( motherboard HP IPMEL-AE PEGATRON )

no IP ...?

 

 

addon cards

8086:1229 rev=02 OK

10DE:8169 rev=02 OK

 

I have a log with RR62x failed ...with no card in the computer

 

if i plug a RR622 card run , no problem in sata mode with only one HDD no RAID << fine ****

 

*** to change something or it really takes me a very detailed explanation **

** I know almost nothing linux !! ***

 

Pierre

 

Try to blacklist r8169 using rmmod GRUB option.

BTW, I have tried MagicPro PCTV Dual USB adaptor on my Xpenology box with 10.5 alpha, the dongle is not recognized by video station.

Did you load the drivers in /etc/rc.local?

 

 

bump :smile:, anything new? Or any idea what shoul I try?

Try it again using 10.5, added more boot-up messages to trace your problem.

 

Hello, now I`m trying gnoboot-alpha-10.5 and v10.4 directly on hardware (MB GA-EP-DS4). Installed latest DSM 5.0-4458. I have some issuses with that configuration.

 

1. When system boots up I have to wait about 5min to be available on the network, or unplug and plug in Lan cable. Motherboard using Realtek 8111C Chip.

2. Unable to install Update 1 no matter if trying automatic or manual update. System loads update the saying that the file is broken.

3. My DVB-T dongle not workig (works well on Trantor version and 4.3). This is Manta dvbtusb01 it is based on chipset It9135. As I see drivers are present in system, but Videostation not recognizes any tv card.

dmesg

[64440.720177] ------------[ cut here ]------------
[64440.720184] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371()
[64440.720186] Hardware name: EP45-DS4
[64440.720188] Modules linked in: it913x_fe(O) cifs udf isofs loop btusb(O) hidp(O) rfcomm(O) bluetooth(O) ip6t_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_limit xt_state xt_tcpudp xt_multiport ipt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common zram(C) mpt2sas synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx pm80xx(O) aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb(O) uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: it913x_fe]
[64440.720342] Pid: 6118, comm: md0_raid1 Tainted: P         C O 3.2.40 #8
[64440.720344] Call Trace:
[64440.720348]  [] ? ata_qc_issue+0x51/0x371
[64440.720351]  [] ? ata_qc_issue+0x51/0x371
[64440.720355]  [] ? warn_slowpath_common+0x78/0x8d
[64440.720359]  [] ? ata_qc_issue+0x51/0x371
[64440.720362]  [] ? ata_qc_reinit+0x6d/0x7d
[64440.720365]  [] ? ata_ioc32+0x15/0x15
[64440.720368]  [] ? ata_scsi_translate+0xda/0x10f
[64440.720371]  [] ? ata_scsi_queuecmd+0x3f/0x70
[64440.720376]  [] ? scsi_dispatch_cmd+0x295/0x2fe
[64440.720379]  [] ? scsi_request_fn+0x4e7/0x516
[64440.720383]  [] ? blk_queue_bio+0x294/0x2b8
[64440.720386]  [] ? generic_make_request+0x91/0xd0
[64440.720389]  [] ? submit_bio+0xa6/0xaf
[64440.720393]  [] ? md_super_write+0x58/0x83
[64440.720396]  [] ? md_update_sb+0x2e6/0x455
[64440.720399]  [] ? md_check_recovery+0x221/0x579
[64440.720403]  [] ? raid1d+0x33/0x1298
[64440.720407]  [] ? need_resched+0x1e/0x28
[64440.720410]  [] ? __schedule+0x515/0x52f
[64440.720414]  [] ? __switch_to+0x142/0x27c
[64440.720417]  [] ? calc_global_load+0x191/0x191
[64440.720420]  [] ? schedule_timeout+0x1e/0xb8
[64440.720424]  [] ? default_spin_lock_flags+0x5/0x9
[64440.720427]  [] ? _raw_spin_lock_irqsave+0x1e/0x27
[64440.720431]  [] ? default_spin_lock_flags+0x5/0x9
[64440.720434]  [] ? _raw_spin_lock_irqsave+0x1e/0x27
[64440.720437]  [] ? md_thread+0xe4/0x102
[64440.720441]  [] ? wake_up_bit+0x22/0x22
[64440.720444]  [] ? md_trim_bio+0x105/0x105
[64440.720447]  [] ? kthread+0x6a/0x72
[64440.720451]  [] ? kernel_thread_helper+0x4/0x10
[64440.720454]  [] ? kthread_bind+0x5c/0x5c
[64440.720457]  [] ? gs_change+0x13/0x13
[64440.720459] ---[ end trace 8e0b7a312ad2c2cc ]---

 

Any suggestions ?

 

Thanks

Try to blacklist r8169 using rmmod GRUB option. Did you load the DVB drivers in /etc/rc.local?

 

Ok, rmmod r8169 solves the problem with network. Now system boots up normally.

I`m still trying to get my DVB-T (IT 9135)tuner working, but without success.

rc.local file created, added lines:

 

#!/bin/sh
source /etc/rc.subr
source /.gnoboot/modules.d/05-media.conf
SYNOLoadModules $MEDIA_MOD

 

but still without sucess. dmesg now is looking different:

 

halts in idle
[sun Apr 20 00:05:38 2014] ACPI: acpi_idle registered with cpuidle
[sun Apr 20 00:05:38 2014] Switching to clocksource hpet
[sun Apr 20 00:05:38 2014] fuse init (API version 7.17)
[sun Apr 20 00:05:38 2014] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[sun Apr 20 00:05:38 2014] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[sun Apr 20 00:05:38 2014] Error: Driver 'e1000e' is already registered, aborting...
[sun Apr 20 00:05:38 2014] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[sun Apr 20 00:05:38 2014] Copyright (c) 2007-2011 Intel Corporation.
[sun Apr 20 00:05:38 2014] Error: Driver 'igb' is already registered, aborting...
[sun Apr 20 00:05:38 2014] Btrfs loaded
[sun Apr 20 00:05:38 2014] synobios: load, major number 201
[sun Apr 20 00:05:38 2014] Brand: Synology
[sun Apr 20 00:05:38 2014] Model: DS-3612xs
[sun Apr 20 00:05:38 2014] set group disks wakeup number to 4, spinup time deno 7
[sun Apr 20 00:05:39 2014] ADDRCONF(NETDEV_UP): eth0: link is not ready
[sun Apr 20 00:05:40 2014] ADDRCONF(NETDEV_UP): eth1: link is not ready
[sun Apr 20 00:05:41 2014] md: md2 stopped.
[sun Apr 20 00:05:41 2014] md: bind
[sun Apr 20 00:05:41 2014] md: bind
[sun Apr 20 00:05:41 2014] md/raid1:md2: active with 2 out of 2 mirrors
[sun Apr 20 00:05:41 2014] md2: detected capacity change from 0 to 1995563270144
[sun Apr 20 00:05:41 2014]  md2: unknown partition table
[sun Apr 20 00:05:41 2014] md: md3 stopped.
[sun Apr 20 00:05:41 2014] md: bind
[sun Apr 20 00:05:41 2014] md/raid1:md3: active with 1 out of 1 mirrors
[sun Apr 20 00:05:41 2014] md3: detected capacity change from 0 to 995369222144
[sun Apr 20 00:05:41 2014]  md3: unknown partition table
[sun Apr 20 00:05:42 2014] EXT4-fs (md2): barriers disabled
[sun Apr 20 00:05:42 2014] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[sun Apr 20 00:05:43 2014] EXT4-fs (md3): barriers disabled
[sun Apr 20 00:05:43 2014] EXT4-fs (md3): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[sun Apr 20 00:05:43 2014] r8168: eth0: link up
[sun Apr 20 00:05:43 2014] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[sun Apr 20 00:05:43 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf6305000
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[sun Apr 20 00:05:43 2014] hub 1-0:1.0: USB hub found
[sun Apr 20 00:05:43 2014] hub 1-0:1.0: 6 ports detected
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6304000
[sun Apr 20 00:05:43 2014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[sun Apr 20 00:05:43 2014] hub 2-0:1.0: USB hub found
[sun Apr 20 00:05:43 2014] hub 2-0:1.0: 6 ports detected
[sun Apr 20 00:05:43 2014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sun Apr 20 00:05:44 2014] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[sun Apr 20 00:05:44 2014] uhci_hcd: USB Universal Host Controller Interface driver
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d100
[sun Apr 20 00:05:44 2014] hub 3-0:1.0: USB hub found
[sun Apr 20 00:05:44 2014] hub 3-0:1.0: 2 ports detected
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d200
[sun Apr 20 00:05:44 2014] hub 4-0:1.0: USB hub found
[sun Apr 20 00:05:44 2014] hub 4-0:1.0: 2 ports detected
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d000
[sun Apr 20 00:05:44 2014] hub 5-0:1.0: USB hub found
[sun Apr 20 00:05:44 2014] hub 5-0:1.0: 2 ports detected
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d300
[sun Apr 20 00:05:44 2014] hub 6-0:1.0: USB hub found
[sun Apr 20 00:05:44 2014] hub 6-0:1.0: 2 ports detected
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[sun Apr 20 00:05:44 2014] hub 7-0:1.0: USB hub found
[sun Apr 20 00:05:44 2014] hub 7-0:1.0: 2 ports detected
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[sun Apr 20 00:05:44 2014] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d500
[sun Apr 20 00:05:44 2014] hub 8-0:1.0: USB hub found
[sun Apr 20 00:05:44 2014] hub 8-0:1.0: 2 ports detected
[sun Apr 20 00:05:44 2014] Initializing USB Mass Storage driver...
[sun Apr 20 00:05:44 2014] scsi4 : usb-storage 1-3:1.0
[sun Apr 20 00:05:44 2014] usbcore: registered new interface driver usb-storage
[sun Apr 20 00:05:44 2014] USB Mass Storage support registered.
[sun Apr 20 00:05:44 2014] usbcore: registered new interface driver usblp
[sun Apr 20 00:05:44 2014] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[sun Apr 20 00:05:44 2014] Got empty serial number. Generate serial number from product.
[sun Apr 20 00:05:44 2014] ip_tables: (C) 2000-2006 Netfilter Core Team
[sun Apr 20 00:05:44 2014] usbcore: registered new interface driver usbhid
[sun Apr 20 00:05:44 2014] usbhid: USB HID core driver
[sun Apr 20 00:05:44 2014] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[sun Apr 20 00:05:44 2014] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[sun Apr 20 00:05:45 2014] Got empty serial number. Generate serial number from product.
[sun Apr 20 00:05:45 2014] drivers/usb/core/hub.c (2154) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[sun Apr 20 00:05:45 2014] input: USBDevice as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2
[sun Apr 20 00:05:45 2014] generic-usb 0003:0B38:0010.0001: input: USB HID v1.10 Keyboard [uSBDevice] on usb-0000:00:1d.0-1/input0
[sun Apr 20 00:05:45 2014] input: USBDevice as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input3
[sun Apr 20 00:05:45 2014] Get empty minor:104
[sun Apr 20 00:05:45 2014] generic-usb 0003:0B38:0010.0002: input,hiddev0: USB HID v1.10 Device [uSBDevice] on usb-0000:00:1d.0-1/input1
[sun Apr 20 00:05:45 2014] ip6_tables: (C) 2000-2006 Netfilter Core Team
[sun Apr 20 00:05:45 2014] scsi 4:0:0:0: Direct-Access     Generic  USB Flash Disk           2.00 PQ: 0 ANSI: 2
[sun Apr 20 00:05:45 2014] syno_disk_type_get: disk driver 'usb-storage'
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] 511488 512-byte logical blocks: (261 MB/249 MiB)
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] Write Protect is off
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] Mode Sense: 03 00 00 00
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] No Caching mode page present
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] Assuming drive cache: write through
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: Attached scsi generic sg3 type 0
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] No Caching mode page present
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] Assuming drive cache: write through
[sun Apr 20 00:05:45 2014]  sdu: sdu1
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] No Caching mode page present
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] Assuming drive cache: write through
[sun Apr 20 00:05:45 2014] sd 4:0:0:0: [sdu] Attached SCSI removable disk
[sun Apr 20 00:05:45 2014] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[sun Apr 20 00:05:45 2014] Got empty serial number. Generate serial number from product.
[sun Apr 20 00:05:45 2014] drivers/usb/core/hub.c (2154) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[sun Apr 20 00:05:45 2014] drivers/usb/core/hub.c (2154) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1
[sun Apr 20 00:05:45 2014] Bluetooth: Core ver 2.16
[sun Apr 20 00:05:45 2014] NET: Registered protocol family 31
[sun Apr 20 00:05:45 2014] Bluetooth: HCI device and connection manager initialized
[sun Apr 20 00:05:45 2014] Bluetooth: HCI socket layer initialized
[sun Apr 20 00:05:45 2014] Bluetooth: L2CAP socket layer initialized
[sun Apr 20 00:05:45 2014] Bluetooth: SCO socket layer initialized
[sun Apr 20 00:05:45 2014] Bluetooth: RFCOMM socket layer initialized
[sun Apr 20 00:05:45 2014] Bluetooth: RFCOMM ver 1.11
[sun Apr 20 00:05:45 2014] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[sun Apr 20 00:05:45 2014] Bluetooth: HIDP socket layer initialized
[sun Apr 20 00:05:45 2014] usbcore: registered new interface driver btusb
[sun Apr 20 00:05:46 2014] cfg80211: Calling CRDA to update world regulatory domain
[sun Apr 20 00:05:46 2014] usbcore: registered new interface driver ath9k_htc
[sun Apr 20 00:05:46 2014] usbcore: registered new interface driver carl9170
[sun Apr 20 00:05:46 2014] usbcore: registered new interface driver ar5523
[sun Apr 20 00:05:46 2014] Broadcom 43xx driver loaded [ Features: PNL ]
[sun Apr 20 00:05:46 2014] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[sun Apr 20 00:05:46 2014] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[sun Apr 20 00:05:46 2014] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[sun Apr 20 00:05:46 2014] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[sun Apr 20 00:05:46 2014] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[sun Apr 20 00:05:46 2014] Intel(R) Wireless WiFi driver for Linux, in-tree:
[sun Apr 20 00:05:46 2014] Copyright(c) 2003-2013 Intel Corporation
[sun Apr 20 00:05:46 2014] usbcore: registered new interface driver lbtf_usb
[sun Apr 20 00:05:46 2014] usbcore: registered new interface driver usb8797
[sun Apr 20 00:05:47 2014] usbcore: registered new interface driver rtl8192cu
[sun Apr 20 00:05:47 2014] usbcore: registered new interface driver rtl8187
[sun Apr 20 00:05:47 2014] usbcore: registered new interface driver zd1211rw
[sun Apr 20 00:05:47 2014] lirc_dev: IR Remote Control driver registered, major 248
[sun Apr 20 00:05:47 2014] IR LIRC bridge handler initialized
[sun Apr 20 00:05:47 2014] IR JVC protocol handler initialized
[sun Apr 20 00:05:47 2014] IR RC5 (streamzap) protocol handler initialized
[sun Apr 20 00:05:47 2014] IR Sony protocol handler initialized
[sun Apr 20 00:05:48 2014] IR RC6 protocol handler initialized
[sun Apr 20 00:05:48 2014] IR NEC protocol handler initialized
[sun Apr 20 00:05:48 2014] IR RC5(x) protocol handler initialized
[sun Apr 20 00:05:48 2014] netlink: 12 bytes leftover after parsing attributes.
[sun Apr 20 00:05:49 2014] usbcore: registered new interface driver snd-usb-audio
[sun Apr 20 00:05:49 2014] usbcore: registered new interface driver ttusb
[sun Apr 20 00:05:50 2014] ata1.00: configured for UDMA/133
[sun Apr 20 00:05:50 2014] ata1.01: configured for UDMA/133
[sun Apr 20 00:05:50 2014] ata1: EH complete
[sun Apr 20 00:05:50 2014] ata2.00: configured for UDMA/133
[sun Apr 20 00:05:50 2014] ata2: EH complete
[sun Apr 20 00:05:50 2014] ata1.00: configured for UDMA/133
[sun Apr 20 00:05:50 2014] ata1.01: configured for UDMA/133
[sun Apr 20 00:05:50 2014] ata1: EH complete
[sun Apr 20 00:05:50 2014] Linux video capture interface: v2.00
[sun Apr 20 00:05:50 2014] usbcore: registered new interface driver hdpvr
[sun Apr 20 00:05:51 2014] i2c-core: driver [msp3400] using legacy suspend method
[sun Apr 20 00:05:51 2014] i2c-core: driver [msp3400] using legacy resume method
[sun Apr 20 00:05:51 2014] usbcore: registered new interface driver em28xx
[sun Apr 20 00:05:51 2014] em28xx driver loaded
[sun Apr 20 00:05:51 2014] Em28xx: Initialized (Em28xx Audio Extension) extension
[sun Apr 20 00:05:51 2014] Em28xx: Initialized (Em28xx dvb Extension) extension
[sun Apr 20 00:05:51 2014] cx23885 driver version 0.0.3 loaded
[sun Apr 20 00:05:51 2014] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[sun Apr 20 00:05:51 2014] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[sun Apr 20 00:05:51 2014] cx2388x blackbird driver version 0.0.9 loaded
[sun Apr 20 00:05:51 2014] cx88/2: registering cx8802 driver, type: blackbird access: shared
[sun Apr 20 00:05:51 2014] cx2388x alsa driver version 0.0.9 loaded
[sun Apr 20 00:05:51 2014] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[sun Apr 20 00:05:51 2014] cx88/2: registering cx8802 driver, type: dvb access: shared
[sun Apr 20 00:05:51 2014] usbcore: registered new interface driver pvrusb2
[sun Apr 20 00:05:51 2014] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
[sun Apr 20 00:05:51 2014] pvrusb2: Debug mask is 31 (0x1f)
[sun Apr 20 00:05:51 2014] usbcore: registered new interface driver ttusb-dec
[sun Apr 20 00:05:51 2014] usbcore: registered new interface driver cinergyT2
[sun Apr 20 00:05:51 2014] usbcore: registered new interface driver pctv452e
[sun Apr 20 00:05:51 2014] usbcore: registered new interface driver dvb_usb_technisat_usb2
[sun Apr 20 00:05:52 2014] EXT4-fs (sdu1): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
[sun Apr 20 00:05:52 2014] usbcore: registered new interface driver dvb_usb_nova_t_usb2
[sun Apr 20 00:05:52 2014] HDHomeRun: Begin init, version 0.0.15
[sun Apr 20 00:05:52 2014] HDHomeRun: Waiting for userspace to connect
[sun Apr 20 00:05:52 2014] HDHomeRun: End init
[sun Apr 20 00:05:53 2014] init: synoindexd main process (23163) killed by USR2 signal
[sun Apr 20 00:05:53 2014] init: synoindexd main process ended, respawning
[sun Apr 20 00:05:58 2014] loop: module loaded
[sun Apr 20 00:05:59 2014] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[sun Apr 20 00:06:03 2014] init: synoindexd main process (23982) killed by HUP signal
[sun Apr 20 00:06:03 2014] init: synoindexd main process ended, respawning
[sun Apr 20 00:06:03 2014] init: synomkthumbd main process (21153) killed by HUP signal
[sun Apr 20 00:06:03 2014] init: synomkthumbd main process ended, respawning
[sun Apr 20 00:06:03 2014] init: synomkflvd main process (21157) killed by HUP signal
[sun Apr 20 00:06:03 2014] init: synomkflvd main process ended, respawning
[sun Apr 20 00:06:04 2014] init: synoindexd main process (26233) killed by HUP signal
[sun Apr 20 00:06:04 2014] init: synoindexd main process ended, respawning
[sun Apr 20 00:06:04 2014] init: synomkthumbd main process (26249) killed by HUP signal
[sun Apr 20 00:06:04 2014] init: synomkthumbd main process ended, respawning
[sun Apr 20 00:06:04 2014] init: synomkflvd main process (26257) killed by HUP signal
[sun Apr 20 00:06:04 2014] init: synomkflvd main process ended, respawning
[sun Apr 20 00:06:07 2014] dvb_usb_v2: Unknown symbol dvb_dmx_swfilter_raw (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_v2: Unknown symbol dvb_frontend_resume (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_v2: Unknown symbol dvb_frontend_suspend (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_it913x: Unknown symbol dvb_usbv2_suspend (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_it913x: Unknown symbol dvb_usbv2_disconnect (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_it913x: Unknown symbol dvb_usbv2_probe (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_it913x: Unknown symbol dvb_usbv2_resume (err 0)
[sun Apr 20 00:06:07 2014] dvb_usb_it913x: Unknown symbol dvb_usbv2_generic_rw (err 0)
[sun Apr 20 00:06:41 2014] dsmnotify.cgi[30413]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb00650 error 6
[sun Apr 20 00:06:41 2014] storagehandler.[30415]: segfault at 0 ip 000000000809e298 sp 00000000ffa4a1d0 error 6
[sun Apr 20 00:07:11 2014] dsmnotify.cgi[30765]: segfault at 0 ip 000000000804ccb8 sp 00000000fff9e4e0 error 6
[sun Apr 20 00:07:41 2014] dsmnotify.cgi[30897]: segfault at 0 ip 000000000804ccb8 sp 00000000ffde9960 error 6
[sun Apr 20 00:08:11 2014] dsmnotify.cgi[31052]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc5b950 error 6
[sun Apr 20 00:08:44 2014] dsmnotify.cgi[31156]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb03940 error 6
[sun Apr 20 00:09:16 2014] dsmnotify.cgi[31297]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8473c0 error 6
[sun Apr 20 00:09:47 2014] dsmnotify.cgi[31404]: segfault at 0 ip 000000000804ccb8 sp 00000000fff43df0 error 6
[sun Apr 20 00:10:19 2014] dsmnotify.cgi[31534]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe90e70 error 6
[sun Apr 20 00:10:51 2014] dsmnotify.cgi[31688]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb42820 error 6
[sun Apr 20 00:11:23 2014] dsmnotify.cgi[31774]: segfault at 0 ip 000000000804ccb8 sp 00000000ff95dea0 error 6
[sun Apr 20 00:11:54 2014] dsmnotify.cgi[31933]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9e8cd0 error 6
[sun Apr 20 00:12:27 2014] dsmnotify.cgi[32013]: segfault at 0 ip 000000000804ccb8 sp 00000000fff54e50 error 6
[sun Apr 20 00:12:59 2014] dsmnotify.cgi[32170]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdf1ea0 error 6
[sun Apr 20 00:13:31 2014] dsmnotify.cgi[32251]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcd03f0 error 6
[sun Apr 20 00:14:03 2014] dsmnotify.cgi[32408]: segfault at 0 ip 000000000804ccb8 sp 00000000fffe1fb0 error 6
[sun Apr 20 00:14:35 2014] dsmnotify.cgi[32496]: segfault at 0 ip 000000000804ccb8 sp 00000000ffaa60e0 error 6
[sun Apr 20 00:15:07 2014] dsmnotify.cgi[32645]: segfault at 0 ip 000000000804ccb8 sp 00000000fff3f590 error 6
[sun Apr 20 00:15:39 2014] dsmnotify.cgi[32734]: segfault at 0 ip 000000000804ccb8 sp 00000000ffebaf70 error 6
[sun Apr 20 00:16:11 2014] dsmnotify.cgi[418]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe6ffd0 error 6
[sun Apr 20 00:16:43 2014] dsmnotify.cgi[510]: segfault at 0 ip 000000000804ccb8 sp 00000000ffac0ea0 error 6
[sun Apr 20 00:17:15 2014] dsmnotify.cgi[665]: segfault at 0 ip 000000000804ccb8 sp 00000000ff871550 error 6

 

Thanks for help :smile:. It is only one thing to make me 100% happy dvbt...

Share this post


Link to post
Share on other sites

Guys, is there anybody who has made work XPEnology on ESXi with normal speeds? If yes - what type of controller in VMWare are you using and what about specific setiings?

Thanks!

Share this post


Link to post
Share on other sites

Hi,

 

I get 110 MB/s when copying files via GBit LAN. I'm using a LSI 9240-8i controller with stock-firmware w/o any Raid-Volumes defined. 6 WD-RED 4TB Disks are mapped via RDM (physical) into the Syno VM. The disks are attached as SCSI 0:1 thru 0:5. The Virtual Controller is LSI SAS. SMART is working except for the temp which displays 0°C

 

Intel e1000 as virtual NIC.

 

Mainborad is the A1SAM-2750F from Supermicro (Intel Avoton).

 

bye,

Darky

Share this post


Link to post
Share on other sites

New problem....

I tried ít twice.

 

Made a backup via rsync... which worked.

but after is was ready no share were available anymore... df shows no drive..

after a reboot everything looks ok.

no entry in any log

 

so, after the file system errors is this the next curious error

Share this post


Link to post
Share on other sites

FYI - After updating to DSM 5.0-4458 Update 2 from DSM 4.3-3810 iSCSI seems to be working perfectly. I am using it with my windows 2012 server to create a thin provisioned virtual disk running 5 VM machines.

 

Thanks for the hard work.

Share this post


Link to post
Share on other sites
what about giving us real machine noobs some love with DSM 5.0?

 

I'm running gnoboot directly on my n54l without VMware. Runs fine.

Share this post


Link to post
Share on other sites
Hi,

 

I get 110 MB/s when copying files via GBit LAN. I'm using a LSI 9240-8i controller with stock-firmware w/o any Raid-Volumes defined. 6 WD-RED 4TB Disks are mapped via RDM (physical) into the Syno VM. The disks are attached as SCSI 0:1 thru 0:5. The Virtual Controller is LSI SAS. SMART is working except for the temp which displays 0°C

 

Intel e1000 as virtual NIC.

 

Mainborad is the A1SAM-2750F from Supermicro (Intel Avoton).

 

bye,

Darky

 

 

Are you using ESXi5? are you able to see SMART status in your DSM?

Share this post


Link to post
Share on other sites

Hi,

 

Are you using ESXi5? are you able to see SMART status in your DSM?

 

I'm using ESXi 5.5. I'm able to run and schedule SMART tests for the disks from the DSM web GUI. The disks' serial numbers also display within DSM. However, the temperature is shown as 0° C / 32° F what leads some nasty scemd.log entries every two seconds. My solution was just to delete scemd.log which prevents logging until the next reboot (or probably log rotation...). I also might just link scemd.log to /dev/null.

 

bye,

Darky

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now