Jump to content
XPEnology Community

maccert

Member
  • Posts

    13
  • Joined

  • Last visited

Everything posted by maccert

  1. maccert

    DSM 6.1.x Loader

    Successfully applied 6.1.3-15152 Update 1 update on my baremetal (DS3615xs) with 1.02b loader No restart needed
  2. maccert

    DSM 6.1.x Loader

    Successful Bare metal installation. followed instructions(thanks by the way great job) - put the loader on USB - edit grub by pressing 'c' during startup - added serial/mac/vid/pid - rebooted - installed latest version for the 3615 with Synology Assistant - reattached old 5.2 disks with data on it and installed plugins again done
  3. Hi, Can you tell me if it is possible to add these sata drivers? Thank you very much!!!! Mainbord: supermicro X10SBA Install Type: Baremetal Storage: SATA 2.0 (3Gbps) from Intel® SoC and SATA 3.0 (6GbpS) from Marvell 88SE923 Issue: SATA support My SATA drivers are not supported Keep up the good work i'm a great fan!!
  4. Hi, is it possible to add these sata drivers? thank you very much!!!! Mainbord: supermicro X10SBA Install Type: Baremetal *****Storage: SATA 2.0 (3Gbps) from Intel® SoC and SATA 3.0 (6GbpS) from Marvell 88SE923***** Issue: SATA support Keep up the good work i'm a great fan!!
  5. hi, can somebody help me with my wifi problem? i have tried everything but nothing works.... ;-( tried several drivers and files but the box still can't find the right ones Synology2> dmesg | grep iwl [ 21.531552] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-6.ucode' failed. [ 21.539873] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-5.ucode' failed. [ 21.539876] iwlwifi 0000:04:00.0: no suitable firmware found! [ 21.539924] iwlwifi 0000:04:00.0: PCI INT A disabled Synology2> insmod /lib/modules/iwlwifi.ko insmod: can't insert '/lib/modules/iwlwifi.ko': unknown symbol in module, or unknown parameter
  6. @Gnoboot i am getting the following error with my intel centrino n-2230 wifi. can you please help me with this? [code][ 21.802019] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 21.802020] Copyright(c) 2003-2013 Intel Corporation [ 21.802061] iwlwifi 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.802068] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 21.802187] iwlwifi 0000:04:00.0: irq 44 for MSI/MSI-X [ 21.819665] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-6.u code' failed. [ 21.826492] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-5.u code' failed. [ 21.826495] iwlwifi 0000:04:00.0: no suitable firmware found! [ 21.826583] iwlwifi 0000:04:00.0: PCI INT A disabled [/code]
  7. is trantor still alive? have not heard from him a while. gr marc
  8. @Gnoboot this is what i have and get when i ran it. #!/bin/sh source /etc/rc.subr source /.gnoboot/modules.d/99-install.conf source /.gnoboot/modules.d/05-media.conf source /.gnoboot/modules.d/04-virt.conf source /.gnoboot/modules.d/03-wifi.conf SYNOLoadModules \$MEDIA_MOD ysctl -w kernel.core_pattern=/tmp/core.%p EOF Synology2> insmod /lib/modules/iwlwifi.ko insmod: can't insert '/lib/modules/iwlwifi.ko': unknown symbol in module, or unknown parameter
  9. @Gnoboot Hello Gnoboot, i have made a output file with ubuntu just like you asked. i hope you can help me with the intel centrino n-2230 wifi card. thanks for your time. gr marc 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09) Subsystem: Gigabyte Technology Co., Ltd Device 5000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Capabilities: 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device d000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=3] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5007 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 1c3a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at f7d1a000 (64-bit, non-prefetchable) [size=1] Capabilities: Kernel driver in use: mei_me 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5006 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7d18000 (32-bit, non-prefetchable) [size=1K] Capabilities: Kernel driver in use: ehci-pci 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f7c00000-f7cfffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5006 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K] Capabilities: Kernel driver in use: ehci-pci 00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 5001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: Kernel driver in use: lpc_ich 00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Device b005 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f0b0 [size=1] Region 1: I/O ports at f0a0 [size=1] Region 2: I/O ports at f090 [size=1] Region 3: I/O ports at f080 [size=1] Region 4: I/O ports at f060 [size=2] Region 5: Memory at f7d16000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 5001 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 11 Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [disabled] [size=11] Region 4: I/O ports at f040 [size=2] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at e000 [size=11] Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: I/O ports at d000 [size=11] Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 04:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4) Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi
  10. Thanks for your quick reply your doing great work, do you mean i have to boot from a live cd to provide you with the information i get from the command `lspci -vvv`?
  11. I have successfully installed gnoboot with DSM 5, thanks for that really great. but my wifi (intel centrino N-2230) does not work. is there anyone who can post a how to add these drivers(or other) to gnoboot? would be great. marc
  12. i don't know if it will help but i think the drivers are here. http://wireless.kernel.org/en/users/Dri ... i#Download gr marc
  13. Trantor and others first of all great work!! I love what you guys succeeded until now. But I do have a question / request. it is possible to use the Intel Centrino Wireless-N 2230 to get working on the gigabyte GA-Z77N-WIFI? would be outstanding. running build XPEnology_DS3612xs_3810-repack-trantor-v1.0 upgraded to XPEnology_DS3612xs_5.0_BETA. Thanks alot. sytem config: XPEnology_DS3612xs_5.0_BETA Gigabyte GA-Z77N-WIFI U-nas 4 * 3tb wd 16gb mem intel i5
×
×
  • Create New...