tsygam

Members
  • Content count

    40
  • Joined

  • Last visited

Everything posted by tsygam

  1. Сборка и модификация kernel

    Весьма интересно, и про ARM и про DSM
  2. PRIMAS4UNO, спасибо за пояснение
  3. Только если можно, объясните зачем плодить сущности и ставить MySQL когда в DSM как служебная база есть Postgres и с ней все работает, или действительно есть веские причины? Я одинаково плохо (т е почти никак) знаю MySQL и Postgres и поэтому спрашиваю.
  4. Так Web Station именно в папке Web держит файлы сайтов, у меня там еще ownclooud и т.п., а в homes/ххх/www вроде персональные сайты и туда вход по http://ip/~username
  5. c SQLLite не влетело. Забыл какая ошибка, но у вас на форуме она обсуждалась - не создавалась база. с Postgres, после распаковки в /volume2/Web/TorrentMonitor : DS> /usr/syno/pgsql/bin/createuser -P torrentmonitor -U postgres DS> /usr/syno/pgsql/bin/createdb -O torrentmonitor torrentmonitor -h localhost -U postgres DS> cat /volume2/Web/TorrentMonitor/db_schema/postgresql.sql | psql -h localhost torrentmonitor torrentmonitor все взлетело.
  6. а почему не postgresql который уже есть в DSM? у меня взлетело легко. ps: спрашиваю т.к. не знаю, а не чтобы поспорить.
  7. Легальный Serial от Synology DS?

    была аналогичная проблема - указания mac в ESXi недостаточно впиши mac ещё в syslinuix.cfg
  8. Какой вопрос .... Отправлено из моего iPhone используя Tapatalk
  9. улыбнуло чес слово немного лет назад dial-up был наверно самым распространенным способом доступа в инет и не только через PSTN - телефонные сети.
  10. Experiences with drive crash?

    Hi, may be my experience will be of interest I have 8 bay U-NAS box: - MB Jetway nf9e-q77 - 500 mb SATA drive for ESXI & datastore - Adaptec 7805 - nanoboot + DSM 5 + ESXi 5.5 - 3x3Tb WD Red in a RAID 5 + 1 disk as a hot spare - whole LUN passed to DSM as RDM where used for a single volume As to your specific questions: - I never had a drive failure as such - I had power failures due to my stupidity - while setting up Network UPS Tools as a server on the router and a client in ESXi, i realised too late that the box was plugged into the filter socket rather into battery backed up socket, so a dosen of power offs occured. No issues, exept for DSM crying that it experienced ubnormal shutdown. - no sure on drives migration, but as far as I remember I sucessfully mounted RDM in a different DSM VM and for sure several times under ubuntu and CentOS VMs. - expansion can be a bit difficult, see my post http://xpenology.com/forum/viewtopic.php?f=15&t=3339&start=40#p24563 and that thread itself, it is not that long. - SMART data passthrough can be an issue, I actually do not care - will set up some notification with ESXi/Adaptec's tools a bit later. After switching to nanoboot, I experianced DSM loosing any connection, though VM was running and after sending it to reboot from the console (VM tools were also off) it was running fine. I guess this is a nanoboot issue. will dig into when i get a chance - I have not run the box for years, but several months without reboots/offs If need more help, pls ask. BR
  11. Hi, I would like to share my short story: - nanoboot + DSM 5 + ESXi 5.5 - Adaptec 7805 - 3x3Tb WD Red in a RAID 5 + 1 disk as a hot spare - whole LUN passed to DSM as RDM where used for a single volume Decided to add 4th disk to RAID. This took about 3 (three!) weeks for Adaptec to complete the rebuilding task after which ESXi recognized increased RDM disk size after refresh from the storage pane in the vsphere client, DSM recognized new disk size after reboot. Obviously it was not possible to increase the volume size by DSM’s standard tools. I had an idea what to do, but made a quick search to confirm and found this wonderful blog: http://blog.azib.net/2013/12/how-i-upgr ... as-to.html with a very well structured comments. Having nothing to add in substance, I would point out that one should check disks/volumes/groups names (for my disk in question I had, /volume2, /dev/vg1001/lv, /dev/md3, and /dev/sdb5 which became /dev/sdb3 after allocation of all free space) and would like to stress that sectors should be used in parted rather than smth else (fire “unit s” in parted). To have all sizes at hand, fire a second terminal window for “parted /dev/sdb unit s print free” Actully this resizing in DSM does not take much time - i think less than an hour for me (apart from RAID rebuild at HW level) with a cofee break BR
  12. XPEnology gnoBoot

    have a look at ESXi thread - i think there was a discussion or several posts at least on pvscsi, RDM and pass-through speeds
  13. XPEnology gnoBoot

    Hi there! can someone help understanding how volume numbers are assigned? I'm on ESXi, made gnoboot as IDE disk, second disk made as pvscsi, put rmmod=ata_piix. Then attached two RDM disks. One of these RDMs was created as DSM's SHR and another one is just basic ext4. mount shows: DS5> mount /dev/root on / type ext4 (defaults) none on /dev/pts type devpts (gid=4,mode=620) /sys on /sys type sysfs (0) /tmp on /tmp type tmpfs (0) /proc/bus/usb on /proc/bus/usb type usbfs (0) /dev/vg1000/lv on /volume1 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl) /dev/md4 on /volume3 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl) /dev/vg1002/lv on /volume4 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl) DS5> why /dev/md4 is mounted on /volume3 and not on /volume2 and /dev/vg1002/lv on /volume4 rather than /volume3 ? BR
  14. @nylund, there was quite a discussion re DSM on ESXi in http://xpenology.com/forum/viewtopic.php?f=2&t=558 about a year ago. May be it could be of interest for you (not sure though).
  15. [SOLVED] Install on vmware ESXI

    have you installed the bootstrap before?
  16. [SOLVED] Install on vmware ESXI

    worked for me too, though I did not have /sbin/shutdown to rename Many thanks!
  17. [SOLVED] Install on vmware ESXI

    super! will give this a try. Thanks!
  18. [SOLVED] Install on vmware ESXI

    yes, I removed those ^M chars. Anyway first command has no effect and following lead to: Call "VirtualMachine.RebootGuest" for object "Synology" on ESXi "____________" failed.
  19. [SOLVED] Install on vmware ESXI

    can you tell which logs should contain VMware tools entries and is there any tools specific logging which can be enabled? I don't have the time to research/debug what it is I've done to get my version working (I do remember spending a reasonable amount of time on it though). I've probably forgotten something somewhere. It may be a few days (weekend?) before I can get back to you on this. I will really appreciate your help and will wait patiently
  20. [SOLVED] Install on vmware ESXI

    Yes, I did actually I do not see this since kernel modules are not loaded at boot for some reason and probably because of this tools fails to load. How modules installed by S37vmware.sh should be started? after I load modules manually and then run S22open-vm-tools.sh or /opt/bin/vmtoolsd --background /var/run/vmtoolsd.pid, tools are started and are seen by vSphere Client as third party tools I can send reboot or other command once without effect on DSM machine, but next time vSphere client fires an error can you tell which logs should contain VMware tools entries and is there any tools specific logging which can be enabled? Thanks for your help!
  21. [SOLVED] Install on vmware ESXI

    Hi Tuatara! I am on 4.2 also. Followed your guide and see vmtools running, but not able to shut down, restart, etc. Also on reboot kernel modules do not load automatically. May be start up script should be different or some config added? I did not find tools.conf Please advise if you can. Regards, tsygam
  22. Kernel building

    Synology apps managing disks are not open source
  23. Trantor, Would you mind including fuse-convmvfs into your next build to allow utf8 to win charset NFS mount? Many thanks for what you are doing and regards tsygam
  24. [SOLVED] Install on vmware ESXI

    modify 19th line of /usr/syno/etc/rc.d/S83nfsd.sh to add auth_rpcgss just before rpcsec_gss_krb5: KERNELMODULEV4="auth_rpcgss rpcsec_gss_krb5" and then run /usr/syno/etc/rc.d/S83nfsd.sh restart while starting it should look as: Starting NFS server... :: Loading module auth_rpcgss ... [ OK ] :: Loading module rpcsec_gss_krb5 ... [ OK ] :: Loading module exportfs ... [ OK ] :: Loading module nfsd ... [ OK ] idea is from here http://xpenology.com/forum/viewtopic.php?f=2&t=6&p=4872#p4872
  25. 4.3 issues

    you are right, i did not think about this