maccert
Member-
Posts
13 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
maccert's Achievements
Newbie (1/7)
1
Reputation
-
Successful Bare metal installation. followed instructions(thanks by the way great job) - put the loader on USB - edit grub by pressing 'c' during startup - added serial/mac/vid/pid - rebooted - installed latest version for the 3615 with Synology Assistant - reattached old 5.2 disks with data on it and installed plugins again done
-
Hi, Can you tell me if it is possible to add these sata drivers? Thank you very much!!!! Mainbord: supermicro X10SBA Install Type: Baremetal Storage: SATA 2.0 (3Gbps) from Intel® SoC and SATA 3.0 (6GbpS) from Marvell 88SE923 Issue: SATA support My SATA drivers are not supported Keep up the good work i'm a great fan!!
-
Hi, is it possible to add these sata drivers? thank you very much!!!! Mainbord: supermicro X10SBA Install Type: Baremetal *****Storage: SATA 2.0 (3Gbps) from Intel® SoC and SATA 3.0 (6GbpS) from Marvell 88SE923***** Issue: SATA support Keep up the good work i'm a great fan!!
-
hi, can somebody help me with my wifi problem? i have tried everything but nothing works.... ;-( tried several drivers and files but the box still can't find the right ones Synology2> dmesg | grep iwl [ 21.531552] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-6.ucode' failed. [ 21.539873] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-5.ucode' failed. [ 21.539876] iwlwifi 0000:04:00.0: no suitable firmware found! [ 21.539924] iwlwifi 0000:04:00.0: PCI INT A disabled Synology2> insmod /lib/modules/iwlwifi.ko insmod: can't insert '/lib/modules/iwlwifi.ko': unknown symbol in module, or unknown parameter
-
@Gnoboot i am getting the following error with my intel centrino n-2230 wifi. can you please help me with this? [code][ 21.802019] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 21.802020] Copyright(c) 2003-2013 Intel Corporation [ 21.802061] iwlwifi 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.802068] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 21.802187] iwlwifi 0000:04:00.0: irq 44 for MSI/MSI-X [ 21.819665] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-6.u code' failed. [ 21.826492] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-2030-5.u code' failed. [ 21.826495] iwlwifi 0000:04:00.0: no suitable firmware found! [ 21.826583] iwlwifi 0000:04:00.0: PCI INT A disabled [/code]
-
is trantor still alive? have not heard from him a while. gr marc
-
@Gnoboot this is what i have and get when i ran it. #!/bin/sh source /etc/rc.subr source /.gnoboot/modules.d/99-install.conf source /.gnoboot/modules.d/05-media.conf source /.gnoboot/modules.d/04-virt.conf source /.gnoboot/modules.d/03-wifi.conf SYNOLoadModules \$MEDIA_MOD ysctl -w kernel.core_pattern=/tmp/core.%p EOF Synology2> insmod /lib/modules/iwlwifi.ko insmod: can't insert '/lib/modules/iwlwifi.ko': unknown symbol in module, or unknown parameter
-
@Gnoboot Hello Gnoboot, i have made a output file with ubuntu just like you asked. i hope you can help me with the intel centrino n-2230 wifi card. thanks for your time. gr marc 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09) Subsystem: Gigabyte Technology Co., Ltd Device 5000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Capabilities: 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device d000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=3] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5007 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 1c3a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at f7d1a000 (64-bit, non-prefetchable) [size=1] Capabilities: Kernel driver in use: mei_me 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5006 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7d18000 (32-bit, non-prefetchable) [size=1K] Capabilities: Kernel driver in use: ehci-pci 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f7c00000-f7cfffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5006 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K] Capabilities: Kernel driver in use: ehci-pci 00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 5001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: Kernel driver in use: lpc_ich 00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Device b005 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f0b0 [size=1] Region 1: I/O ports at f0a0 [size=1] Region 2: I/O ports at f090 [size=1] Region 3: I/O ports at f080 [size=1] Region 4: I/O ports at f060 [size=2] Region 5: Memory at f7d16000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 5001 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 11 Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [disabled] [size=11] Region 4: I/O ports at f040 [size=2] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at e000 [size=11] Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: I/O ports at d000 [size=11] Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 04:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4) Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi
-
Thanks for your quick reply your doing great work, do you mean i have to boot from a live cd to provide you with the information i get from the command `lspci -vvv`?
-
I have successfully installed gnoboot with DSM 5, thanks for that really great. but my wifi (intel centrino N-2230) does not work. is there anyone who can post a how to add these drivers(or other) to gnoboot? would be great. marc
-
i don't know if it will help but i think the drivers are here. http://wireless.kernel.org/en/users/Dri ... i#Download gr marc
-
Trantor and others first of all great work!! I love what you guys succeeded until now. But I do have a question / request. it is possible to use the Intel Centrino Wireless-N 2230 to get working on the gigabyte GA-Z77N-WIFI? would be outstanding. running build XPEnology_DS3612xs_3810-repack-trantor-v1.0 upgraded to XPEnology_DS3612xs_5.0_BETA. Thanks alot. sytem config: XPEnology_DS3612xs_5.0_BETA Gigabyte GA-Z77N-WIFI U-nas 4 * 3tb wd 16gb mem intel i5