Search the Community

edit 14.05.2020: 6.2.3 is back online as v25426, for newer coffeelake cpu's with problems using hardware transcoding (dev/dri present after boot) there is a new videostation that fixes the problem https://xpenology.com/forum/topic/28321-driver-extension-jun-104b-for-dsm623-for-918/?do=findComment&comment=144918 edit2 02.06.2020: as @richv31 pointed out here https://xpenology.com/forum/topic/21663-driver-extension-jun-103b104b-for-dsm622-for-3615xs-3617xs-918/?do=findComment&comment=148564 there seems to be a serious problem with 918+ and scsi/sas drivers, at least with mpt2sas/mpt3sas, not just with 6.2.2/6.2.3 it also happens with jun's original loader 1.04b and dsm 6.2.0 (23824), breaking raid sets after not properly waking up from hdd hibernation means potential data loss i had a two disk raid1 set on a lsi 9211-8i and after disks spinning down only one came up and i saw some really worrying messages on the serial console, i was not able to log in to the system, not on the web gui, even not on the serial console, the whole system was in lock down and only switching off seemed to work as of the problems with not getting s.m.a.r.t. values i used juns old original raid_class.ko, scsi_transport_sas.ko, scsi_transport_spi.ko to get the old state back (replacing my newly made ones from more recent synology kernel source 24922 ) in 0.11/0.12 - these version inherit the problem that seems to be present since the beginning with loader 1.04b anyone using mpt2sas/mpt3sas and disk hibernation on 918+ should disable it for now to not risk any data loss the new 0.13 for 918+ will have the raid_class.ko, scsi_transport_sas.ko, scsi_transport_spi.ko from kernel source 24922, that version did work on testing on my system without breaking anything and without such alarming errors on wakeup of disks, there will be no smart data but at least it seems safer then disks not waking up properly for "proper" lsi sas controller support i'd suggest using 3615 or 3617 as it is "native" in these units and should work better, maybe there are kernel options missing in the 918+ kernel and that cant be fixed, if anyone finds out more just add a comment (i might not have the time to dig into this) the other alternative is to use sata/ahci instead of scsi/sas with 918+, that works without problems on my system using 918+ (12 disks), JMB585 based controller seem to be the best choice atm as they support pcie 3.0 and can have up to 2000 MByte/s for its 5 sata ports (the older marvell and asm chips use only pcie 2.0 limiting the data rate to 500 MB/s or 1000 MB/s, even 8 port controller with two of the older chips use a pcie bridge chip with just two lanes making them terrible choice for a high port count - might be ok with just one or two 1GBit nic's but will at least limit the rebuild speed and ssd's should be kept away from these controllers and place in internal sata ports) for Instructions about installing or updating please read "Driver extension jun 1.03b/1.04b for DSM6.2.2 for 3615xs / 3617xs / 918+" if i have time i will write more in this place the new package is not well tested i just did some tests with hardware i have at hand (ahci, e1000e, r8168, igb, bnx2x, mpt2sas/mpt3sas) and tested update from 6.2.2 to 6.2.3 basically synology reverted the kernel config change made in 6.2.2 back to what was before so old drivers from original 1.04b loader (and older driver i made before 6.2.2) should work again - but as synology also introduced there own new i915 driver with 6.2.3 there will be a conflict when jun's i915 driver is loaded with 6.2.3 there are two positive new things, synology released a nearly recent kernel source code (24922) and 6.2.3 has a new i915 driver supporting as much gpu hardware as jun's backported i915 driver in loader 1.04b - so there is no need for jun's i915 driver anymore and in theory we should have good support for apollo lake, gemini lake and other newer hardware but it seems not all new UHD630 is supported as there is dev id "3E98" unsupported (i5-9400, i5-9600k, i7-9700t, i7-9700), ark.intel.com and wikichip.og are usually good sources to check the id https://ark.intel.com/content/www/us/en/ark/products/134898/intel-core-i5-9400-processor-9m-cache-up-to-4-10-ghz.html edit: there seems to be versions of the i5-9400 with a "3E92" GPU this versions don t need the patched driver, they will run with the default driver, /dev/dri should be present ootb, it also can be checked in /var/log/dmesg when searching for "[8086:3e92]" https://en.wikichip.org/wiki/intel/core_i5/i5-9400 there is also a good document from intel listing all coffeelake's https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-cfl-vol01-configurations.pdf coffeelake cup's without driver support (no hardware transcoding), SKU numbers should be listed when buying and can be checked on the box i9 SKU S82 i7 SKU S82 i5 SKU S6f2 a new 10th gen i5-10500 / i3-10300 have device id's "9BC8" and there are no "9xxx" numbers in the driver we use so don't expect any newer gen10 cpu to work with hardware transcoding even when it "only" has UHD630 igpu edit: there are also even lower end 10th gen cpus (2 core) with a different GPU device id "9BA8" like G5920, G5925, G6400 with a iGPU UHD 610, the equivalent in the 9th gen would be a G5400 and that comes with pci device id's 3E90/3E93, so we need to edit a different entry when patching for this edit: i made a modded i915 driver were the pci device id of the 9th gen UHD 630 iGPU (3E92/3E93) is replaces with the device id's of the newer/different UHD 610/630 iGPU's that are unsupported 8086:3E92 => iGPU UHD 630, Low End Desktop 9 Series (original driver) -> 8086:3E98 => iGPU UHD 630, High End Desktop 9 Series (i5-9400, i5-9600k, i7-9700t, i7-9700) 8086:9BC8 => iGPU UHD 630, Low End Desktop i5-10500, i5-10600T and lower 8086:9BC5 => iGPU UHD 630, High End Desktop i510600K and higher 8086:3E93 => iGPU UHD 610, Low End Desktop 9 Series -> 8086:9BA8 => iGPU UHD 610, low End Desktop Series like G6400 the zip file contains 3 versions in every one is 3E92 replaced with the one we want to get working, as its just a crude binary patch i choose 3E92 as it seemed the most similar device, was tested for 3E98 iGPU and seemed to work, for the 10th there is at least one positive feedback with plex its intended to be used with the extra/extra2 from this thread as this removes jun's old i915 driver (not just one file) that will prevent synologys new driver to work properly the patched i915.ko file is supposed to be copied to /usr/lib/modules/ and replaces the original file from synology for 6.2.3 Update3 (added 9BA8 support) https://gofile.io/d/4fFJA5 https://dailyuploads.net/x3e0nkxk6p0e https://usersdrive.com/zfl9csl91xwr.html https://www34.zippyshare.com/v/304gfbnO/file.html SHA256: EC2447F47FEE6457FE3F409E26B83E5BF73023310E10A624575A822FDBC10642 a little warning, in worst case the system might crash or freeze when transcoding and and such undefined states and hard resets can result i data loss (cache) or damaged raids (depending on the load of the system at this time) so until its more tested it should not be used on system with "important" data and a recent backup - ok i know its a little over cautious but i dont like the thought someone looses data because of this nice to have feature (software mdadm raids can be repaired in most cases if the worst happens) -> positive feedback for a i5-9400, i5-9600K, i9-9900T (8086:3E98) to fully working -> positive feedback for a G6400 (8086:9BA8) to have /dev/dri -> one user positive feedback for a i5-10600T (8086:9BC8) to fully working with plex -> one user negative feedback for a i5-10500 (8086:9BC8) to get /dev/dri devices but no transcoding with emby -> one user negative feedback for a i9-10900 (8086:9BC5) system does not boot anymore - seems to be a solid hands off? edit: there is a driver source patch for 10th gen that came up along 7.x and 9BC5 was confirmed to work with this new driver, so anyone with a 10th gen gpu and trouble can change to 7.x (tc rp loader) ot can try these 6.2.3 modules from this link (i915_918_623.7z) https://xpenology.com/forum/topic/59909-i915ko-backported-driver-for-intel-10th-gen-ds918-ver-701-up3/?do=findComment&comment=277236 i completely removed jun's i915 drivers from the extra/extra2 and changed/added the i915 firmware needed, also i took care of the "old" i915 drivers on the installed system in /usr/lib/modules/update/, they are now deleted on boot so if you come from 6.2.2 and used extra/extra2 std or recovery or you did already used juns original 1.04b extra/extra2, it should work as soon as you boot up (when drivers in "update" are not present then the default drivers from synology will be used and with the added i915 in place it will work on most intel gpu's up to coffee lake) the driver versions are the same as in the 6.2.2 extra/extra2 but are newly compiled, as every driver from 6.2.2 is renewed all the old drivers are overwritten and there should be no crashing drivers on boot (which can prevent proper shutdown or reboot) we now have one universal i915 driver (and not jun's and synologys) its back to one package for all cpu/gpu, if needed there will be a recovery version too i only did test a new created loader from 1.04b image file with zImage and rd.gz from "DSM_DS918+_25426.pat" and the new extra.extra2, it will also work with the 6.2.0 kernel that is by default in the 1.04b image if there are problems getting hardware transcoding to work it might help to disable vt-x/vt-d in bios (reported on a J5005 Gemini Lake), but there are other possible reasons because of the licensing thats needed for this to work, but at least it will not hurt as as lon as you dint intent to use the vmm package if you accidentally updated 6.2.2 to 6.2.3 and now have problems like no network after boot, no proper shutdown/reboot or missing /dev/dri (hardware transcoding) then you just copy the new extra/extra2 to your already updated usb drive (the update to 6.2.3 already installed the new kernel on it) with latest updates of win10 there is no drive letter anymore, its possible to still do it with the tools already used for creating the usb drive, read the usb to a imgae file with "Win32DiskImager 1.0" (activate "read only allocated partitions"), mount that image with osfmount (like in the tutorial section), overwrite old /extra/extra2.lzma and write the image back to usb with Win32DiskImager extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.9 some intel and realtek driver updated so hopefully more onboard nic's will work (like realtek 8125), also realtek 8152 is newer so all 2.5G usb solutions from realtek schould work, there is still no way for the intel 2.5G nic as there is no standalone driver for older kernel versions, removed fireware, added bnxt_en and sr_mod/cdrom, nic Killer E2500, added *vf.ko in rc.modules https://pixeldrain.com/u/jHa2eYrc https://gofile.io/d/mUFYxQ 1CED32FCF63EB54DAA44335FA1EFBCE408D41A3E16D55771D35B0FD423F0B9CF extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.3 scsi/sas disks will have no s.m.a.r.t. infos with lsi sas controllers (see edit2 above), newer atlantic.ko driver 2.3.4, r8125 added to rc.modules, used latest source for realtek drivers r8101/r8125/r8152/r8168/r8169, bna.ko firmware corrected https://pixeldrain.com/u/pkBY9XjC https://gofile.io/d/FvoFdo SHA256: EF6F26999C006A29B3B37A7D40C694943100F0A9F53EC22D50E749F729347EC6 for special purpose and tests, extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.12.1 - this version shows s.m.a.r.t. info and serial of disks for lsi scsi/sas but might corrupt the raid when disk hibernation is active (see warning above) https://pixeldrain.com/u/kZJdPj1H https://gofile.io/d/nsglbX SHA256: 9089D38A4975AB212553DA7E35CE54027DE4F84D526A74A46A089FC7E88C1693 extra.lzma for loader 1.03b ds3615 DSM 6.2.3 v0.12.1_test, added virtio/9p, CDROM drivers, nic Killer E2500 lhttps://pixeldrain.com/u/Rx4tV6ay https://gofile.io/d/RnX1QA SHA256: E72820BF648CFD7F6075DEEB1208A3E0D8A61F38289AE17AC7E355910B9B0E0E extra.lzma for loader 1.03b ds3615 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ... https://pixeldrain.com/u/5aN77nWf https://gofile.io/d/PMIDrX SHA256: 5DE93F95841CC01F9E87EE4EE2A330084B447E44EBAA6013A575A935D227D4AF extra.lzma for loader 1.03b ds3617 DSM 6.2.3 v0.12_test (2/2022), added virtio/9p, CDROM drivers, nic Killer E2500 https://pixeldrain.com/u/xmhCVxck https://gofile.io/d/VRtmC1 SHA256: B9AC8705D5D9DCEED1C0315346E4F2C7C4CD07C4ED519FC9901E8E368A3AE448 extra.lzma for loader 1.03b ds3617 DSM 6.2.3 v0.11.2_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ... (0.11.2 because i forgot bnx2/bnx2x firmware and mpt2/mp3 driver problem when updating from 6.2.2 in 0.11) https://pixeldrain.com/u/zwAJzKa9 https://gofile.io/d/0Tx8A7 SHA256: D467914E55582D238AC5EC4D31750F47AEB5347240F2EAE54F1866E58A8BD1C9

Hello everyone, I have install DSM on my Qnap TS559 pro+, all work without problem except the hibernation. I have the problem with 6.2.3 and I have downgrade to 6.2.2 but same problem. Anyone know how can I resolve the problem ?

Hi all, after the update from DSM 7.0.1 to 7.1-42661 Update 2 on my HP N40L the HDD hibernation feature doesn't work anymore. Until 7.0.1 I've always followed the advice found on this thread which consists in modify the /etc.defaults/syslog-ng/patterndb.d/scemd.conf file and it worked just fine. (apart from some random HDD wakes) Can anyone have some advice on that? is anyone using the HDD hibernation feature on this DSM version? FYI from 7.0.1 to 7.1 I have migrated TCRP NAS config from DS3615xs to DS3622xs+ can this be a possible problem? I don't know if it's a hardware problem related on HP N40L and similar or not... Thank you for your help

On my system the disk sleeps and never wakes up on its own only after I set a sleep time manually via terminal command with root user: hdparm -S 60 /dev/sd{X} I've tested different time values and came to the conclusion that disk can only sleep when a time is no more than 5 minutes. If its greater than that - the disk would never enter the hibernation state. You also can force it to hibernate immediately using command: hdparm -y /dev/sd{X} apart from that I've only set "Hibernation" option in "Control Panel" -> "Hardware & Power" -> "HDD Hibernation" to 10 minutes and also ran script from https://github.com/AlexFromChaos/synology_hibernation_fixer

On my system the disk sleeps and never wakes up on its own only after I set a sleep time manually via terminal command with root user: hdparm -S 60 /dev/sd{X} I've tested different time values and came to the conclusion that disk can only sleep when a time is no more than 5 minutes. If its greater than that - the disk would never enter the hibernation state. You also can force it to hibernate immediately using command: hdparm -y /dev/sd{X} apart from that I've only set "Hibernation" option in "Control Panel" -> "Energy Saving" to 10 minutes and also ran script from https://github.com/AlexFromChaos/synology_hibernation_fixer

Hello it is normal that the syno log is flood every seconds with: Oct 2 14:50:33 syno_localinstall_dsm.sh: netlink_ok=true Oct 2 14:50:33 syno_localinstall_dsm.sh: main(), start: 2022-10-02T14:50:34+02:00 MH-SNAS01 kernel: [ 2636.675551] synobios get empty ttyS current I have check the log becuase my drives dont go in hibernation mode.

In the Arc Loader try "hibernation" addon

I'm getting the following error messages from dmesg everytime DSM puts the HDDs to hibernation. I'm running ds918+ Redpill Tinycore DSM 7.0.1-42218 Update 2. Tips? kern :warn : [Mon Jun 27 13:02:38 2022] No such hdd enable pin. Index: 5 kern :warn : [Mon Jun 27 13:02:38 2022] ------------[ cut here ]------------ kern :warn : [Mon Jun 27 13:02:38 2022] WARNING: CPU: 1 PID: 4086 at drivers/ata/libata-core.c:453 SYNO_CTRL_HDD_POWERON+0x4f/0x60() kern :warn : [Mon Jun 27 13:02:38 2022] Modules linked in: cmac cifs tun nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables fuse 8021q vfat fat udf isofs loop vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_user(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) synoacl_vfs(PO) raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx nfsd btrfs ecryptfs zstd_decompress zstd_compress xxhash xor raid6_pq lockd grace rpcsec_gss_krb5 auth_rpcgss sunrpc aesni_intel kern :warn : [Mon Jun 27 13:02:38 2022] glue_helper lrw gf128mul ablk_helper apollolake_synobios(PO) hid_generic usbhid hid usblp i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm drm_panel_orientation_quirks iosf_mbi fb fbdev video backlight button uhci_hcd ehci_pci ehci_hcd r8168(O) i2c_algo_bit zram igb(O) e1000e(O) sg dm_snapshot dm_bufio crc_itu_t crc_ccitt psnap p8022 llc hfsplus md4 hmac sit tunnel4 ipv6 flashcache_syno(O) flashcache(O) syno_flashcache_control(O) dm_mod arc4 crc32c_intel cryptd sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance processor cpufreq_stats vxlan ip6_udp_tunnel udp_tunnel ip_tunnel etxhci_hcd virtio_scsi(OE) virtio_net(OE) virtio_blk(OE) virtio_pci(OE) virtio_mmio(OE) virtio_ring(OE) kern :warn : [Mon Jun 27 13:02:38 2022] virtio(OE) usb_storage xhci_pci xhci_hcd usbcore usb_common [last unloaded: apollolake_synobios] kern :warn : [Mon Jun 27 13:02:38 2022] CPU: 1 PID: 4086 Comm: scsi_eh_10 Tainted: P W OE 4.4.180+ #42218 kern :warn : [Mon Jun 27 13:02:38 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 kern :warn : [Mon Jun 27 13:02:38 2022] 0000000000000000 ffff88017830bcb0 ffffffff812ef89d 0000000000000009 kern :warn : [Mon Jun 27 13:02:38 2022] 0000000000000000 ffff88017830bce8 ffffffff8105255f 0000000000000bb8 kern :warn : [Mon Jun 27 13:02:38 2022] 0000000000000000 0000000000000001 ffff880178978000 0000000000000000 kern :warn : [Mon Jun 27 13:02:38 2022] Call Trace: kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff812ef89d>] dump_stack+0x4d/0x70 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff8105255f>] warn_slowpath_common+0x7f/0xb0 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81052646>] warn_slowpath_null+0x16/0x20 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff8141dcdf>] SYNO_CTRL_HDD_POWERON+0x4f/0x60 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff8142e825>] syno_libata_port_power_ctl+0xc5/0x1a0 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff8142f7c7>] syno_libata_set_deep_sleep+0x2b7/0x9c0 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81436ee3>] ata_scsi_port_error_handler+0x133/0x1a30 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff8106b0fe>] ? cancel_delayed_work_sync+0xe/0x10 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81432868>] ? ata_scsi_cmd_error_handler+0x118/0x190 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff8143887b>] ata_scsi_error+0x9b/0xe0 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff813f86f5>] scsi_error_handler+0xa5/0x530 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81575bcf>] ? __schedule+0x2ef/0x820 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff813f8650>] ? scsi_eh_get_sense+0x170/0x170 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff810700f5>] kthread+0xd5/0xf0 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81070020>] ? kthread_worker_fn+0x160/0x160 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81579fef>] ret_from_fork+0x3f/0x80 kern :warn : [Mon Jun 27 13:02:38 2022] [<ffffffff81070020>] ? kthread_worker_fn+0x160/0x160 kern :warn : [Mon Jun 27 13:02:39 2022] ---[ end trace 4d3f8f657722e7be ]--- kern :err : [Mon Jun 27 13:02:42 2022] ata11: wake up successful, the reset fail can be ignored kern :err : [Mon Jun 27 13:02:45 2022] ata10: wake up from deepsleep, reset link now kern :err : [Mon Jun 27 13:02:48 2022] ata10: wake up successful, the reset fail can be ignore

там появился интересный аддон hibernation "Disable IO logs to fix disk hibernation." - возможно, он всё решает. У себя не проверял, у меня там и торренты постоянно крутятся, и ещё что-то - всё равно не будут спать. Да и для нормальных дисков не так это и страшно. Как обычно - более вредны частые пуски и остановы...

[ 0.091203] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.091509] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.091814] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.092119] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.092425] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.092730] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.093035] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.093341] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.093646] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.093952] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.094289] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.094649] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.094977] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.095319] ACPI: IRQ0 used by override. [ 0.095522] ACPI: IRQ9 used by override. [ 0.095725] Using ACPI (MADT) for SMP configuration information [ 0.096031] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.096298] TSC deadline timer available [ 0.096502] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.096768] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.097165] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.097556] PM: hibernation: Registered nosave memory: [mem 0x39f99000-0x3a898fff] [ 0.097947] PM: hibernation: Registered nosave memory: [mem 0x434af000-0x452fefff] [ 0.098338] PM: hibernation: Registered nosave memory: [mem 0x452ff000-0x45b2efff] [ 0.098729] PM: hibernation: Registered nosave memory: [mem 0x45b2f000-0x45bfefff] [ 0.099120] PM: hibernation: Registered nosave memory: [mem 0x45c00000-0x49ffffff] [ 0.099510] PM: hibernation: Registered nosave memory: [mem 0x4a000000-0x4a1fffff] [ 0.099901] PM: hibernation: Registered nosave memory: [mem 0x4a200000-0x4a3fffff] [ 0.100291] PM: hibernation: Registered nosave memory: [mem 0x4a400000-0x4affffff] [ 0.100682] PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x503fffff] [ 0.101073] PM: hibernation: Registered nosave memory: [mem 0x50400000-0xfe00ffff] [ 0.101463] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.101855] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff] [ 0.102248] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.102638] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff] [ 0.103029] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.103420] [mem 0x50400000-0xfe00ffff] available for PCI devices [ 0.103737] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.106862] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:8 nr_node_ids:1 [ 0.107380] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u262144 [ 0.107723] pcpu-alloc: s176664 r8192 d32232 u262144 alloc=1*2097152 [ 0.108052] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.108286] Built 1 zonelists, mobility grouping on. Total pages: 4074138 [ 0.108645] Policy zone: Normal [ 0.108808] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.111059] Synology Hardware Version: SA6400 [ 0.111292] Internal netif num: 2 [ 0.111481] Mac2: 94DE806D73B4 [ 0.111644] Mac1: 001132C7F4BE [ 0.111803] Serial Number: 1980PDN028952 [ 0.112012] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.112716] Vender format version: 2 [ 0.113400] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.114044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.114507] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.139885] Memory: 15942936K/16555320K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 612128K reserved, 0K cma-reserved) [ 0.140645] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.140987] ftrace: allocating 32589 entries in 128 pages [ 0.148606] ftrace: allocated 128 pages with 1 groups [ 0.148928] rcu: Hierarchical RCU implementation. [ 0.149174] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=8. [ 0.149515] Rude variant of Tasks RCU enabled. [ 0.149749] Tracing variant of Tasks RCU enabled. [ 0.149996] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.150391] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.153104] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16 [ 0.153862] Console: colour dummy device 80x25 [ 0.154101] ACPI: Core revision 20200925 [ 0.154670] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.155235] APIC: Switch to symmetric I/O mode setup [ 0.155492] DMAR: Host address width 39 [ 0.155690] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.155966] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.156438] DMAR: DRHD base: 0x000000fed84000 flags: 0x0 [ 0.156715] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157124] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.157438] DMAR: dmar2: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157847] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff [ 0.158171] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 2 [ 0.158536] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.158814] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.160997] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.161283] x2apic enabled [ 0.161484] Switched APIC routing to cluster x2apic. [ 0.166436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.171205] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 0.171785] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200) [ 0.172785] pid_max: default: 32768 minimum: 301 [ 0.173040] LSM: Security Framework initializing [ 0.173299] AppArmor: AppArmor initialized [ 0.173542] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173805] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.174362] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.174815] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.175148] process: using mwait in idle threads [ 0.175390] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.175785] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.176092] Speculative Store Bypass: Vulnerable [ 0.176439] Freeing SMP alternatives memory: 32K [ 0.176839] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1) [ 0.177434] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.177786] ... version: 5 [ 0.177992] ... bit width: 48 [ 0.178203] ... generic registers: 8 [ 0.178410] ... value mask: 0000ffffffffffff [ 0.178684] ... max period: 00007fffffffffff [ 0.178785] ... fixed-purpose events: 4 [ 0.178992] ... event mask: 0001000f000000ff [ 0.179323] rcu: Hierarchical SRCU implementation. [ 0.179942] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.180348] smp: Bringing up secondary CPUs ... [ 0.180622] x86: Booting SMP configuration: [ 0.180786] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.186163] smp: Brought up 1 node, 8 CPUs [ 0.186293] smpboot: Max logical packages: 1 [ 0.186786] smpboot: Total of 8 processors activated (38707.20 BogoMIPS) [ 0.188006] devtmpfs: initialized [ 0.188042] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 0.188050] PM: Registering ACPI NVS region [mem 0x452ff000-0x45b2efff] (8585216 bytes) [ 0.189284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.189789] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.190182] pinctrl core: initialized pinctrl subsystem [ 0.190569] NET: Registered protocol family 16 [ 0.190835] audit: initializing netlink subsys (disabled) [ 0.191120] audit: type=2000 audit(1700704115.031:1): state=initialized audit_enabled=0 res=1 [ 0.191120] thermal_sys: Registered thermal governor 'step_wise' [ 0.191265] cpuidle: using governor ladder [ 0.191999] cpuidle: using governor menu [ 0.192214] ACPI: bus type PCI registered [ 0.192214] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.192828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.193309] PCI: not using MMCONFIG [ 0.193492] PCI: Using configuration type 1 for base access [ 0.194802] Kprobes globally optimized [ 0.195006] ACPI: Added _OSI(Module Device) [ 0.195018] ACPI: Added _OSI(Processor Device) [ 0.195018] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.195032] ACPI: Added _OSI(Processor Aggregator Device) [ 0.195311] ACPI: Added _OSI(Linux-Dell-Video) [ 0.195541] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.195785] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.236734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.237786] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.238228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.238607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.238785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.239225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.239604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.240785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.241226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.241604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.241785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.242226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.242605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.243785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.244228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.244607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.244785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.245226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.245605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.246785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.247225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.247604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.247785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.248226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.248604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.249785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.250225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.250604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.250785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.251226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.251690] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.252785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.253225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.253604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.253785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.254226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.254604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.255785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.256225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.256604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.256785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.257226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.257650] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.258785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.259225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.259603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.259785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.260226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.260604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.260785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.261225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.261604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.262785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.263226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.263605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.263785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.264225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.264603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.265785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.266225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.266604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.266785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.267227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.267604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.268785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.269225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.269607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.269785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.270226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.270607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.271785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.272225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.272687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.272785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.273227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.273605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.274785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.275225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.275687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.275785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.276226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.276603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.277785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.278226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.278689] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.278785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.279226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.279604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.280785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.281225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.281605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.281785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.282226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.282605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.283785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.284226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.284605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.284785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.285226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.285603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.286785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.287226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.287605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.287785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.288227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.288606] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.288785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.289226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.289604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.290785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.291226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.291604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.291785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.292225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.292604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.293785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.294226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.294604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.294785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.295228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.296179] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPD0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.296741] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.297785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.298175] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPL1], AE_NOT_FOUND (20200925/dswload2-162) [ 0.298738] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.298785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.299590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.299785] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.300205] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.300788] ACPI: 19 ACPI AML tables successfully acquired and loaded [ 0.301697] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.302787] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.303394] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.303793] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.309803] ACPI: Dynamic OEM Table Load: [ 0.310026] ACPI: SSDT 0xFFFF88810104B000 0001C6 (v02 PmRef Cpu0Psd 00003000 INTL 20160422) [ 0.311210] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.313331] ACPI: Dynamic OEM Table Load: [ 0.313551] ACPI: SSDT 0xFFFF888101542C00 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.314721] ACPI: Dynamic OEM Table Load: [ 0.314789] ACPI: SSDT 0xFFFF888100CCD000 0005C3 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.316203] ACPI: Dynamic OEM Table Load: [ 0.316422] ACPI: SSDT 0xFFFF888101543000 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.317806] ACPI: Dynamic OEM Table Load: [ 0.318028] ACPI: SSDT 0xFFFF8881010E4000 0008E7 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.319482] ACPI: Dynamic OEM Table Load: [ 0.319697] ACPI: SSDT 0xFFFF888100CCE800 00048A (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.321753] ACPI: Dynamic OEM Table Load: [ 0.321789] ACPI: SSDT 0xFFFF888100CCF000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20160422) [ 0.323193] ACPI: Dynamic OEM Table Load: [ 0.323413] ACPI: SSDT 0xFFFF888100CCF800 00048A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.327502] ACPI: EC: EC started [ 0.327678] ACPI: EC: interrupt blocked [ 0.328164] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.328428] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.328785] ACPI: Interpreter enabled [ 0.328986] ACPI: (supports S0 S4 S5) [ 0.329179] ACPI: Using IOAPIC for interrupt routing [ 0.329462] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.332261] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources [ 0.332728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335432] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.338715] ACPI: Power Resource [BTPR] (on) [ 0.339406] ACPI: Power Resource [PAUD] (on) [ 0.345820] ACPI: Power Resource [V0PR] (on) [ 0.346129] ACPI: Power Resource [V1PR] (on) [ 0.346427] ACPI: Power Resource [V2PR] (on) [ 0.348250] ACPI: Power Resource [PXTC] (on) [ 0.348666] ACPI: Power Resource [PTPL] (on) [ 0.349149] ACPI: Power Resource [PXTC] (on) [ 0.349814] ACPI: Power Resource [PXTC] (on) [ 0.351989] ACPI: Power Resource [WRST] (on) [ 0.357430] ACPI: Power Resource [TBT0] (on) [ 0.357791] ACPI: Power Resource [TBT1] (on) [ 0.357816] ACPI: Power Resource [D3C] (on) [ 0.473844] ACPI: Power Resource [FN00] (off) [ 0.474231] ACPI: Power Resource [FN01] (off) [ 0.474804] ACPI: Power Resource [FN02] (off) [ 0.474892] ACPI: Power Resource [FN03] (off) [ 0.475242] ACPI: Power Resource [FN04] (off) [ 0.476805] ACPI: Power Resource [PIN] (off) [ 0.477213] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.477578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.480612] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.484019] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] [ 0.486076] PCI host bridge to bus 0000:00 [ 0.486293] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.486651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.486785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.487181] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window] [ 0.487567] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.487785] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.488095] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 [ 0.489794] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 [ 0.489794] pci 0000:00:02.0: reg 0x10: [mem 0x601c000000-0x601cffffff 64bit] [ 0.489794] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.490182] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.490483] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.490809] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.491167] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.491673] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.492785] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.493927] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 [ 0.494257] pci 0000:00:04.0: reg 0x10: [mem 0x601d140000-0x601d15ffff 64bit] [ 0.495309] pci 0000:00:06.0: [8086:9a09] type 01 class 0x060400 [ 0.495688] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.496454] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400 [ 0.497384] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.497724] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid [ 0.497911] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330 [ 0.498239] pci 0000:00:0d.0: reg 0x10: [mem 0x601d160000-0x601d16ffff 64bit] [ 0.498666] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.499417] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340 [ 0.499745] pci 0000:00:0d.2: reg 0x10: [mem 0x601d100000-0x601d13ffff 64bit] [ 0.500792] pci 0000:00:0d.2: reg 0x18: [mem 0x601d181000-0x601d181fff 64bit] [ 0.501203] pci 0000:00:0d.2: supports D1 D2 [ 0.501427] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.502413] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 [ 0.502746] pci 0000:00:14.0: reg 0x10: [mem 0x5e500000-0x5e50ffff 64bit] [ 0.502873] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.503819] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 [ 0.504152] pci 0000:00:14.2: reg 0x10: [mem 0x601d178000-0x601d17bfff 64bit] [ 0.504535] pci 0000:00:14.2: reg 0x18: [mem 0x601d180000-0x601d180fff 64bit] [ 0.505453] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000 [ 0.505807] pci 0000:00:14.3: reg 0x10: [mem 0x601d174000-0x601d177fff 64bit] [ 0.506330] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.507343] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 [ 0.507723] pci 0000:00:15.0: reg 0x10: [mem 0x4010000000-0x4010000fff 64bit] [ 0.508805] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000 [ 0.508898] pci 0000:00:15.3: reg 0x10: [mem 0x4010001000-0x4010001fff 64bit] [ 0.510065] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 [ 0.510405] pci 0000:00:16.0: reg 0x10: [mem 0x601d17d000-0x601d17dfff 64bit] [ 0.510861] pci 0000:00:16.0: PME# supported from D3hot [ 0.511789] pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601 [ 0.512121] pci 0000:00:17.0: reg 0x10: [mem 0x5e510000-0x5e511fff] [ 0.512453] pci 0000:00:17.0: reg 0x14: [mem 0x5e514000-0x5e5140ff] [ 0.512787] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.513083] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.513380] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.513675] pci 0000:00:17.0: reg 0x24: [mem 0x5e513000-0x5e5137ff] [ 0.514833] pci 0000:00:17.0: PME# supported from D3hot [ 0.515797] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400 [ 0.515884] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.516859] pci 0000:00:1d.1: [8086:a0b1] type 01 class 0x060400 [ 0.517275] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold [ 0.518280] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 [ 0.519318] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100 [ 0.519669] pci 0000:00:1f.3: reg 0x10: [mem 0x601d170000-0x601d173fff 64bit] [ 0.519839] pci 0000:00:1f.3: reg 0x20: [mem 0x601d000000-0x601d0fffff 64bit] [ 0.520313] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.521268] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 [ 0.521605] pci 0000:00:1f.4: reg 0x10: [mem 0x601d17c000-0x601d17c0ff 64bit] [ 0.521814] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.522788] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 [ 0.523803] pci 0000:00:1f.5: reg 0x10: [mem 0x50400000-0x50400fff] [ 0.524813] pci 0000:01:00.0: [144d:a809] type 00 class 0x010802 [ 0.525141] pci 0000:01:00.0: reg 0x10: [mem 0x5e400000-0x5e403fff 64bit] [ 0.525685] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.525787] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.526170] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.526446] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.526762] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.526789] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.527272] pci 0000:2c:00.0: [10ec:8168] type 00 class 0x020000 [ 0.527604] pci 0000:2c:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.527815] pci 0000:2c:00.0: reg 0x18: [mem 0x5e304000-0x5e304fff 64bit] [ 0.528183] pci 0000:2c:00.0: reg 0x20: [mem 0x5e300000-0x5e303fff 64bit] [ 0.528655] pci 0000:2c:00.0: supports D1 D2 [ 0.528785] pci 0000:2c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529797] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.529797] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.529797] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.531816] pci 0000:2d:00.0: [1217:8621] type 00 class 0x080501 [ 0.532152] pci 0000:2d:00.0: reg 0x10: [mem 0x5e201000-0x5e201fff] [ 0.532484] pci 0000:2d:00.0: reg 0x14: [mem 0x5e200000-0x5e2007ff] [ 0.533925] pci 0000:2d:00.0: PME# supported from D3hot D3cold [ 0.537839] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.538105] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.541824] ACPI: EC: interrupt unblocked [ 0.541824] ACPI: EC: event unblocked [ 0.541990] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.542251] ACPI: EC: GPE=0x6e [ 0.542409] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.542773] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events [ 0.543842] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.544238] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.544238] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.544788] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.545084] vgaarb: loaded [ 0.545259] SCSI subsystem initialized [ 0.545793] libata version 3.00 loaded. [ 0.546007] pps_core: LinuxPPS API ver. 1 registered [ 0.546007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.546261] PTP clock support registered [ 0.546813] EDAC MC: Ver: 3.0.0 [ 0.546958] PCI: Using ACPI for IRQ routing [ 0.567450] PCI: pci_cache_line_size set to 64 bytes [ 0.567947] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.568259] e820: reserve RAM buffer [mem 0x39f99000-0x3bffffff] [ 0.568571] e820: reserve RAM buffer [mem 0x434af000-0x43ffffff] [ 0.568785] e820: reserve RAM buffer [mem 0x45c00000-0x47ffffff] [ 0.569097] e820: reserve RAM buffer [mem 0x4afc00000-0x4afffffff] [ 0.569797] clocksource: Switched to clocksource tsc-early [ 0.576870] VFS: Disk quotas dquot_6.6.0 [ 0.577090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.577494] AppArmor: AppArmor Filesystem Enabled [ 0.577766] pnp: PnP ACPI init [ 0.578061] system 00:00: [io 0x0700-0x073f] has been reserved [ 0.578371] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.578684] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579065] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.579462] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.579776] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.580187] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.580936] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.581600] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.581949] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.582293] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.582637] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.583002] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.583364] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.583725] system 00:04: [mem 0xfe0b0000-0xfe0b0fff] has been reserved [ 0.584072] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.584420] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.585326] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.585656] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.586020] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.586366] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.586709] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.587055] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.587399] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.587743] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.588089] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.588433] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.588781] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.589298] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.589611] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590080] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590557] pnp: PnP ACPI: found 8 devices [ 0.596053] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.596547] NET: Registered protocol family 2 [ 0.596933] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.598344] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.598817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.599328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.599800] TCP: Hash tables configured (established 131072 bind 65536) [ 0.600162] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600536] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600953] NET: Registered protocol family 1 [ 0.601192] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.601616] pci 0000:00:02.0: BAR 7: assigned [mem 0x4011000000-0x4017ffffff 64bit] [ 0.602014] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.602272] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.602625] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.602897] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.603215] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.603567] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.603990] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.604248] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.604565] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.604923] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.605184] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.605540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.605861] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.606181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.606536] pci_bus 0000:00: resource 7 [mem 0x50400000-0xbfffffff window] [ 0.606893] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.607265] pci_bus 0000:01: resource 1 [mem 0x5e400000-0x5e4fffff] [ 0.607589] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.607878] pci_bus 0000:02: resource 1 [mem 0x52000000-0x5e1fffff] [ 0.608201] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.608593] pci_bus 0000:2c: resource 0 [io 0x3000-0x3fff] [ 0.608881] pci_bus 0000:2c: resource 1 [mem 0x5e300000-0x5e3fffff] [ 0.609208] pci_bus 0000:2d: resource 1 [mem 0x5e200000-0x5e2fffff] [ 0.609624] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.610406] PCI: CLS 64 bytes, default 64 [ 1.445477] Trying to unpack rootfs image as initramfs... [ 1.464216] Freeing initrd memory: 73260K [ 1.464454] DMAR: No ATSR found [ 1.464652] DMAR: dmar1: Using Queued invalidation [ 1.464907] DMAR: dmar0: Using Queued invalidation [ 1.465155] DMAR: Translation was enabled for dmar0 but we are not in kdump mode [ 1.465537] DMAR: dmar2: Using Queued invalidation [ 1.465925] pci 0000:00:00.0: Adding to iommu group 0 [ 1.466193] pci 0000:00:02.0: Adding to iommu group 1 [ 1.466459] pci 0000:00:04.0: Adding to iommu group 2 [ 1.466727] pci 0000:00:06.0: Adding to iommu group 3 [ 1.467004] pci 0000:00:07.0: Adding to iommu group 4 [ 1.467273] pci 0000:00:0d.0: Adding to iommu group 5 [ 1.467545] pci 0000:00:0d.2: Adding to iommu group 5 [ 1.467816] pci 0000:00:14.0: Adding to iommu group 6 [ 1.468088] pci 0000:00:14.2: Adding to iommu group 6 [ 1.468353] pci 0000:00:14.3: Adding to iommu group 7 [ 1.468622] pci 0000:00:15.0: Adding to iommu group 8 [ 1.468896] pci 0000:00:15.3: Adding to iommu group 8 [ 1.469164] pci 0000:00:16.0: Adding to iommu group 9 [ 1.469430] pci 0000:00:17.0: Adding to iommu group 10 [ 1.469701] pci 0000:00:1d.0: Adding to iommu group 11 [ 1.469975] pci 0000:00:1d.1: Adding to iommu group 12 [ 1.470251] pci 0000:00:1f.0: Adding to iommu group 13 [ 1.470526] pci 0000:00:1f.3: Adding to iommu group 13 [ 1.470798] pci 0000:00:1f.4: Adding to iommu group 13 [ 1.471068] pci 0000:00:1f.5: Adding to iommu group 13 [ 1.471338] pci 0000:01:00.0: Adding to iommu group 14 [ 1.471609] pci 0000:2c:00.0: Adding to iommu group 15 [ 1.471882] pci 0000:2d:00.0: Adding to iommu group 16 [ 1.472172] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.472507] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.472842] software IO TLB: mapped [mem 0x000000003f4af000-0x00000000434af000] (64MB) [ 1.473297] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] [ 1.473937] caller tgl_uncore_imc_freerunning_init_box+0xa2/0xe0 mapping multiple BARs [ 1.474455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 1.474993] clocksource: Switched to clocksource tsc [ 1.476123] Initialise system trusted keyrings [ 1.478759] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 1.480602] Key type asymmetric registered [ 1.480839] Asymmetric key parser 'x509' registered [ 1.481128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.481533] io scheduler mq-deadline registered [ 1.481782] io scheduler kyber registered [ 1.482039] io scheduler bfq registered [ 1.482664] pcieport 0000:00:06.0: PME: Signaling with IRQ 123 [ 1.483221] pcieport 0000:00:07.0: PME: Signaling with IRQ 124 [ 1.483560] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.486550] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125 [ 1.487161] pcieport 0000:00:1d.1: PME: Signaling with IRQ 126 [ 1.487851] Monitor-Mwait will be used to enter C-1 state [ 1.488156] Monitor-Mwait will be used to enter C-2 state [ 1.488718] Monitor-Mwait will be used to enter C-3 state [ 1.489038] ACPI: \_SB_.PR00: Found 3 idle states [ 1.489534] ACPI: \_SB_.PR01: Found 3 idle states [ 1.490000] ACPI: \_SB_.PR02: Found 3 idle states [ 1.490421] ACPI: \_SB_.PR03: Found 3 idle states [ 1.490851] ACPI: \_SB_.PR04: Found 3 idle states [ 1.491282] ACPI: \_SB_.PR05: Found 3 idle states [ 1.491694] ACPI: \_SB_.PR06: Found 3 idle states [ 1.492141] ACPI: \_SB_.PR07: Found 3 idle states [ 1.501417] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.502049] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.502417] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.513099] brd: module loaded [ 1.513306] Loading iSCSI transport class v2.0-870. [ 1.558422] rdac: device handler registered [ 1.679081] nvme nvme0: pci function 0000:01:00.0 [ 1.679365] i2c /dev entries driver [ 1.679582] ahci 0000:00:17.0: version 3.0 [ 1.680066] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.680508] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 1.681022] Cannot find slot node of this ata_port. [ 1.686496] scsi host0: ahci [ 1.686734] ata1 : SATA max UDMA/133 abar m2048@0x5e513000 port 0x5e513100 irq 127 [ 1.687525] NET: Registered protocol family 17 [ 1.687780] Key type dns_resolver registered [ 1.688666] IPI shorthand broadcast: enabled [ 1.688930] sched_clock: Marking stable (1682885186, 6019632)->(1694020852, -5116034) [ 1.689466] registered taskstats version 1 [ 1.689691] Loading compiled-in X.509 certificates [ 1.690024] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 1.693171] redpill: loading out-of-tree module taints kernel. [ 1.693533] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 1.702800] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.708897] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.735154] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.735586] printk: console [ttyS0] enabled [ 1.736039] printk: bootconsole [uart8250] disabled [ 1.739894] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 1.740456] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 1.741096] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 1.741628] page_owner is disabled [ 1.741828] AppArmor: AppArmor sha1 policy hashing enabled [ 1.755505] nvme nvme0: 8/0/0 default/read/poll queues [ 1.762546] nvme0n1: p1 p2 p3 [ 1.999844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.004852] ata1.00: ATA-9: CT240BX500SSD1, M6CR013, max UDMA/133 [ 2.005236] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.005639] ata1.00: SN:1901E16A7E62 [ 2.015964] ata1.00: configured for UDMA/133 [ 2.016240] Invalid parameter [ 2.016510] ata1.00: Find SSD disks. [CT240BX500SSD1] [ 2.018428] scsi 0:0:0:0: Direct-Access ATA CT240BX500SSD1 R013 PQ: 0 ANSI: 5 [ 2.019258] sd 0:0:0:0: got sata disk[0] [ 2.019606] ata1.00: Enabling discard_zeroes_data [ 2.020001] sd 0:0:0:0: [sata1] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.020500] sd 0:0:0:0: [sata1] Write Protect is off [ 2.020833] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 2.021200] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.022015] ata1.00: Enabling discard_zeroes_data [ 2.022605] sata1: p1 p2 [ 2.023255] ata1.00: Enabling discard_zeroes_data [ 2.023686] sd 0:0:0:0: [sata1] Attached SCSI disk [ 2.042257] Freeing unused kernel image (initmem) memory: 1344K [ 2.055028] Write protecting the kernel read-only data: 18432k [ 2.056033] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.056621] Freeing unused kernel image (rodata/data gap) memory: 344K [ 2.057023] rodata_test: all tests were successful [ 2.057323] Run /init as init process [ 2.057549] with arguments: [ 2.057730] /init [ 2.057875] withefi [ 2.058027] DiskIdxMap [ 2.058195] sataboot2 [ 2.058360] SataPortMap [ 2.058533] with environment: [ 2.058727] HOME=/ [ 2.058878] TERM=linux [ 2.059049] pid=0x5583 [ 2.059217] syno_port_thaw=1 [ 2.059413] SasIdxMap=0 [ 2.059585] vid=0x0781 [ 2.059752] HddHotplug=0 [ 2.059930] syno_hdd_detect=0 [ 2.060132] syno_hdd_powerup_seq=0 [ 2.527798] random: crng init done [ 2.565124] ACPI: bus type USB registered [ 2.565370] usbcore: registered new interface driver usbfs [ 2.565671] usbcore: registered new interface driver hub [ 2.565972] usbcore: registered new device driver usb [ 2.577805] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.578099] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 2.579560] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009010 [ 2.580076] xhci_hcd 0000:00:0d.0: cache line size of 64 is not supported [ 2.580704] hub 1-0:1.0: USB hub found [ 2.580920] hub 1-0:1.0: 1 port detected [ 2.581313] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.581616] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 2.582031] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.582437] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.583163] hub 2-0:1.0: USB hub found [ 2.583391] hub 2-0:1.0: 4 ports detected [ 2.583952] usb: port power management may be unreliable [ 2.584520] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.584822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.586342] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009010 [ 2.586853] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.587488] hub 3-0:1.0: USB hub found [ 2.587712] hub 3-0:1.0: 12 ports detected [ 2.588745] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.589053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.589472] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.589911] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.590471] hub 4-0:1.0: USB hub found [ 2.590704] hub 4-0:1.0: 4 ports detected [ 2.847901] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.025067] usb 3-5: not running at top speed [ 3.432972] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.581250] usb 3-5: not running at top speed [ 3.829502] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [ 3.846121] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.848763] r8168 Copyright (C) 2023 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 3.989085] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.137251] usb 3-5: not running at top speed [ 4.545080] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.693239] usb 3-5: not running at top speed [ 5.058902] synobios open /dev/ttyS1 success [ 5.059142] Fail to get disk 1 led type [ 5.059351] Fail to get disk 2 led type [ 5.059558] Fail to get disk 3 led type [ 5.059765] Fail to get disk 4 led type [ 5.059979] Fail to get disk 5 led type [ 5.060187] Fail to get disk 6 led type [ 5.060395] Fail to get disk 7 led type [ 5.060602] Fail to get disk 8 led type [ 5.060810] Fail to get disk 9 led type [ 5.061022] Fail to get disk 10 led type [ 5.061233] Fail to get disk 11 led type [ 5.061445] Fail to get disk 12 led type [ 5.061854] 2023-11-23 1:48:40 UTC [ 5.062044] synobios: load, major number 201 [ 5.062274] Brand: Synology [ 5.062427] Model: SA-6400 [ 5.062577] synobios cpu_arch proc entry initialized [ 5.062847] synobios crypto_hw proc entry initialized [ 5.063118] synobios syno_platform proc entry initialized [ 5.066157] Module [epyc7002_synobios] is removed. [ 5.066434] synobios: unload [ 5.100894] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.250106] usb 3-5: not running at top speed [ 5.658084] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.806273] usb 3-5: not running at top speed [ 5.945946] usb 3-7: new high-speed USB device number 3 using xhci_hcd [ 6.107229] Got empty serial number. Generate serial number from product. [ 6.245939] usb 3-9: new full-speed USB device number 4 using xhci_hcd [ 6.398176] Got empty serial number. Generate serial number from product. [ 6.536938] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 6.686861] Got empty serial number. Generate serial number from product. [ 15.357224] md: md0 stopped. [ 15.358931] md/raid1:md0: active with 1 out of 4 mirrors [ 15.360400] md0: detected capacity change from 0 to 8589869056 [ 15.425438] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 15.448709] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 15.452111] eth0: 0xffffc90000111000, 7c:8a:e1:8e:92:57, IRQ 139 [ 17.375183] Module [r8168] is removed. [ 17.419172] Module [pgdrv] is removed. [ 18.211257] md: md1 stopped. [ 18.212249] md/raid1:md1: active with 1 out of 4 mirrors [ 18.212902] md1: detected capacity change from 0 to 2147418112 [ 18.227952] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 35.371479] md1: detected capacity change from 2147418112 to 0 [ 35.371805] md: md1: set sata1p2 to syno_auto_remap [0] [ 35.372088] md: md1 stopped. [ 35.434723] synobios open /dev/ttyS1 success [ 35.434966] Fail to get disk 1 led type [ 35.435173] Fail to get disk 2 led type [ 35.435380] Fail to get disk 3 led type [ 35.435586] Fail to get disk 4 led type [ 35.435794] Fail to get disk 5 led type [ 35.436006] Fail to get disk 6 led type [ 35.436214] Fail to get disk 7 led type [ 35.436421] Fail to get disk 8 led type [ 35.436627] Fail to get disk 9 led type [ 35.436837] Fail to get disk 10 led type [ 35.437050] Fail to get disk 11 led type [ 35.437262] Fail to get disk 12 led type [ 35.437675] 2023-11-23 1:49:10 UTC [ 35.437867] synobios: load, major number 201 [ 35.438097] Brand: Synology [ 35.438250] Model: SA-6400 [ 35.438399] synobios cpu_arch proc entry initialized [ 35.438664] synobios crypto_hw proc entry initialized [ 35.438939] synobios syno_platform proc entry initialized [ 35.442006] Module [epyc7002_synobios] is removed. [ 35.442282] synobios: unload [ 39.153181] Module [rp] is removed. [ 39.337330] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 39.354142] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.354143] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.354605] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.356221] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.356662] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.357119] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.383751] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 40.114672] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 40.114675] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.115180] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.191005] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 40.193156] systemd[1]: Detected architecture x86-64. [ 40.193483] systemd[1]: Running with unpopulated /etc. [ 40.194056] systemd[1]: Set hostname to <SynologyNAS>. [ 40.194985] systemd[1]: Initializing machine ID from random generator. [ 40.241533] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 40.258052] systemd[1]: Populated /etc with preset unit settings. [ 40.414770] syno-pkg-generator: begin processing builtin package [ 40.415422] syno-pkg-generator: Load info, spk=[ActiveInsight-x86_64-2.2.2-23120.spk] [ 40.452664] syno-pkg-generator: Load info, spk=[BackupRestoreManager-x86_64-2.5.2-12461.spk] [ 40.471492] syno-pkg-generator: Load info, spk=[DhcpServer-x86_64-1.0.2-0046.spk] [ 40.479526] syno-pkg-generator: Load info, spk=[FileStation-x86_64-1.4.1-1559.spk] [ 40.501094] syno-pkg-generator: Load info, spk=[HighAvailability-x86_64-2.1.4-1581.spk] [ 40.522133] syno-pkg-generator: Load info, spk=[HybridShare-epyc7002-1.4.1-1512.spk] [ 40.538099] syno-pkg-generator: Load info, spk=[HyperBackup-ED-x86_64-1.0.0-3716.spk] [ 40.570218] syno-pkg-generator: Load info, spk=[OAuthService-x86_64-1.1.4-0101.spk] [ 40.575268] syno-pkg-generator: Load info, spk=[Python2-x86_64-2.7.18-1004.spk] [ 40.593864] syno-pkg-generator: Load info, spk=[QuickConnect-x86_64-1.0.4-0108.spk] [ 40.608145] syno-pkg-generator: Load info, spk=[SMBService-x86_64-4.15.13-0871.spk] [ 40.648068] syno-pkg-generator: Load info, spk=[ScsiTarget-x86_64-1.0.10-0314.spk] [ 40.665831] syno-pkg-generator: Load info, spk=[SecureSignIn-x86_64-1.1.4-0341.spk] [ 40.675674] syno-pkg-generator: Load info, spk=[StorageManager-epyc7002-1.0.0-0017.spk] [ 40.690815] syno-pkg-generator: Load info, spk=[SupportService-x86_64-1.1.0-21017.spk] [ 40.696094] syno-pkg-generator: Load info, spk=[SynologyUniversalSearch-x86_64-1.7.0-0704.spk] [ 40.721840] syno-pkg-generator: Load info, spk=[USBCopy-x86_64-2.2.1-1306.spk] [ 40.729458] syno-pkg-generator: Generate builtin pkg install units [ 40.735035] syno-pkg-generator: Generate builtin pkg startup units [ 41.017113] syno-pkg-generator: end processing builtin package [ 41.095557] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 41.107490] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 41.108306] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 41.128033] zram: Added device: zram0 [ 41.128350] zram: Added device: zram1 [ 41.128416] zram: Added device: zram2 [ 41.128838] zram: Added device: zram3 [ 41.136085] cryptd: max_cpu_qlen set to 1000 [ 41.142566] systemd-journald[7756]: Received request to flush runtime journal from PID 1 [ 41.144927] AVX2 version of gcm_enc/dec engaged. [ 41.145191] AES CTR mode by8 optimization enabled [ 41.151307] md: md1 stopped. [ 41.153312] md/raid1:md1: active with 1 out of 4 mirrors [ 41.153754] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 41.155072] md1: detected capacity change from 0 to 2147418112 [ 41.160200] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 41.171107] NET: Registered protocol family 10 [ 41.171487] Segment Routing with IPv6 [ 41.173531] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 41.189094] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.213799] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 41.215159] zram0: detected capacity change from 0 to 2461007872 [ 41.225860] Adding 2403324k swap on /dev/zram0. Priority:1 extents:1 across:2403324k SS [ 41.227155] zram1: detected capacity change from 0 to 2461007872 [ 41.238800] Adding 2403324k swap on /dev/zram1. Priority:1 extents:1 across:2403324k SS [ 41.240072] zram2: detected capacity change from 0 to 2461007872 [ 41.249911] Adding 2403324k swap on /dev/zram2. Priority:1 extents:1 across:2403324k SS [ 41.251218] zram3: detected capacity change from 0 to 2461007872 [ 41.260057] loop: module loaded [ 41.262827] Adding 2403324k swap on /dev/zram3. Priority:1 extents:1 across:2403324k SS [ 41.265906] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 41.266245] Copyright(c) 2007 - 2020 Intel Corporation. [ 41.272321] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 41.272691] Copyright(c) 1999 - 2020 Intel Corporation. [ 41.278202] r8168 Gigabit Ethernet driver 8.046.04-NAPI-DASH loaded [ 41.284677] Reinit 1 8001 [ 41.284853] Reinit 2 1 [ 41.295037] Reinit 1 8001 [ 41.295211] Reinit 2 1 [ 41.295873] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 41.298488] r8168 Copyright (C) 2020 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 41.344920] qed_init called [ 41.345086] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 41.345383] creating debugfs root node [ 41.349217] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 41.363671] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 41.364232] creating debugfs root node [ 41.403662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 41.404592] ehci-pci: EHCI PCI platform driver [ 41.405666] uhci_hcd: USB Universal Host Controller Interface driver [ 41.417210] synobios open /dev/ttyS1 success [ 41.417447] Fail to get disk 1 led type [ 41.417654] Fail to get disk 2 led type [ 41.417862] Fail to get disk 3 led type [ 41.418070] Fail to get disk 4 led type [ 41.418276] Fail to get disk 5 led type [ 41.418478] Fail to get disk 6 led type [ 41.418685] Fail to get disk 7 led type [ 41.418887] Fail to get disk 8 led type [ 41.419097] Fail to get disk 9 led type [ 41.419302] Fail to get disk 10 led type [ 41.419510] Fail to get disk 11 led type [ 41.419718] Fail to get disk 12 led type [ 41.420058] 2023-11-23 1:49:16 UTC [ 41.420238] synobios: load, major number 201 [ 41.420475] Brand: Synology [ 41.420626] Model: SA-6400 [ 41.420769] synobios cpu_arch proc entry initialized [ 41.421038] synobios crypto_hw proc entry initialized [ 41.421302] synobios syno_platform proc entry initialized [ 41.442321] usb-storage 3-5:1.0: USB Mass Storage device detected [ 41.442753] scsi host1: usb-storage 3-5:1.0 [ 41.443067] usbcore: registered new interface driver usb-storage [ 41.444674] usbcore: registered new interface driver uas [ 41.790005] eth0: 0xffffc90000141000, 00:11:32:c7:f4:be, IRQ 139 [ 41.796117] Reinit 1 8001 [ 41.796291] Reinit 2 1 [ 41.806483] Reinit 1 8001 [ 41.806667] Reinit 2 1 [ 41.824980] Reinit 1 8001 [ 41.825151] Reinit 2 1 [ 41.974670] 8021q: 802.1Q VLAN Support v1.8 [ 42.415199] Module [adt7475] is removed. [ 42.432000] Module [hwmon_vid] is removed. [ 42.498608] scsi 1:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 42.499267] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 42.499587] sd 1:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 42.501664] sd 1:0:0:0: [synoboot] Write Protect is off [ 42.501963] sd 1:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 42.502626] sd 1:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 42.518964] synoboot: synoboot1 synoboot2 synoboot3 [ 42.520865] sd 1:0:0:0: [synoboot] Attached SCSI removable disk [ 42.545553] ext2: synoboot2 mounted, process=synoencvolume [ 42.547598] ext4: synoboot2 mounted, process=synoencvolume [ 42.553184] vfat: synoboot2 mounted, process=synoencvolume [ 42.589590] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 42.591398] synoboot2 unmounted, process=synoencvolume [ 43.021791] raid6: avx512x4 gen() 57465 MB/s [ 43.038802] raid6: avx512x4 xor() 17066 MB/s [ 43.055798] raid6: avx512x2 gen() 62430 MB/s [ 43.072876] raid6: avx512x2 xor() 37980 MB/s [ 43.089874] raid6: avx512x1 gen() 61643 MB/s [ 43.106873] raid6: avx512x1 xor() 36375 MB/s [ 43.123878] raid6: avx2x4 gen() 50022 MB/s [ 43.140879] raid6: avx2x4 xor() 19525 MB/s [ 43.157878] raid6: avx2x2 gen() 51638 MB/s [ 43.174878] raid6: avx2x2 xor() 29991 MB/s [ 43.191878] raid6: avx2x1 gen() 40183 MB/s [ 43.208875] raid6: avx2x1 xor() 23823 MB/s [ 43.225878] raid6: sse2x4 gen() 13734 MB/s [ 43.242876] raid6: sse2x4 xor() 7185 MB/s [ 43.259876] raid6: sse2x2 gen() 14355 MB/s [ 43.276876] raid6: sse2x2 xor() 9233 MB/s [ 43.293875] raid6: sse2x1 gen() 13423 MB/s [ 43.310874] raid6: sse2x1 xor() 7491 MB/s [ 43.311116] raid6: using algorithm avx512x2 gen() 62430 MB/s [ 43.311418] raid6: .... xor() 37980 MB/s, rmw enabled [ 43.311688] raid6: using avx512x2 recovery algorithm [ 43.312792] xor: automatically using best checksumming function avx [ 43.339209] Btrfs loaded, crc32c=crc32c-intel [ 44.448652] Module [adt7475] is removed. [ 44.456140] Module [hwmon_vid] is removed. [ 44.583151] ata1.00: configured for UDMA/133 [ 44.583422] ata1 : EH complete [ 44.583606] Invalid parameter [ 44.583876] ata1.00: Enabling discard_zeroes_data [ 44.618921] Invalid parameter [ 45.957298] Reinit 1 8001 [ 45.957519] Reinit 2 1 [ 45.964898] r8168: eth0: link up 1 Gbps [ 46.444101] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 46.482957] Module [adt7475] is removed. [ 46.500887] Module [hwmon_vid] is removed. [ 49.436892] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.438594] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.439969] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.471244] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.485295] synoboot2 unmounted, process=synopkicompatsy [ 49.523681] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.525347] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.526278] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.542896] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.589954] synoboot2 unmounted, process=synopkicompatsy [ 49.748581] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(22e1b0466126). [ 49.788425] syno_extent_pool: module license 'Proprietary' taints kernel. [ 49.788778] Disabling lock debugging due to kernel taint [ 49.790539] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 49.829332] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 49.829958] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 49.830590] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 49.904776] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 49.905194] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 49.905578] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 49.906024] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 49.906435] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 49.906824] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 50.207215] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 50.409784] ext2: synoboot1 mounted, process=syno_bios_log_c [ 50.415214] ext4: synoboot1 mounted, process=syno_bios_log_c [ 50.416659] vfat: synoboot1 mounted, process=syno_bios_log_c [ 50.449917] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 50.452577] synoboot1 unmounted, process=syno_bios_log_c [ 52.246771] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 53.782136] fuse: init (API version 7.32) [ 430.287517] md/raid1:md2: active with 1 out of 1 mirrors [ 430.288234] md2: detected capacity change from 0 to 229072961536 [ 430.599405] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 430.687526] BTRFS: device label 2023.11.23-01:55:45 v69057 devid 1 transid 3 /dev/mapper/cachedev_0 scanned by mkfs.btrfs (24756) [ 430.704724] BTRFS info (device dm-2): using free space tree [ 430.705033] BTRFS info (device dm-2): using block group cache tree [ 430.705368] BTRFS info (device dm-2): has skinny extents [ 430.705663] BTRFS info (device dm-2): flagging fs with big metadata feature [ 430.708399] BTRFS info (device dm-2): enabling ssd optimizations [ 430.708752] BTRFS info (device dm-2): root of syno feature tree is null [ 430.709362] BTRFS info (device dm-2): creating free space tree [ 430.709813] BTRFS info (device dm-2): setting compat-ro feature flag for FREE_SPACE_TREE (0x1) [ 430.711711] BTRFS info (device dm-2): cleaning free space cache v1 [ 430.713248] BTRFS info (device dm-2): creating UUID tree [ 430.715263] BTRFS info (device dm-2): setting compat feature flag for BLOCK_GROUP_CACHE_TREE (0x4000000000000000) [ 430.722384] BTRFS info (device dm-2): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 430.818613] SYNO.Storage.CG (24434): drop_caches: 3 [ 430.871067] BTRFS info (device dm-2): enabling auto syno reclaim space [ 430.871486] BTRFS info (device dm-2): enabling ssd optimizations [ 430.871851] BTRFS info (device dm-2): using free space tree [ 430.872184] BTRFS info (device dm-2): using block group cache tree [ 430.872561] BTRFS info (device dm-2): has skinny extents [ 430.877094] BTRFS info (device dm-2): root of syno feature tree is null [ 431.384499] The mempool could be used by other devices [ 431.423343] Synotify use 16384 event queue size [ 431.423630] Synotify use 16384 event queue size [ 431.621356] BTRFS info (device dm-2): using free space tree [ 431.621668] BTRFS info (device dm-2): using block group cache tree [ 578.518466] audit: type=1400 audit(1700704692.940:2): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 578.520004] audit: type=1400 audit(1700704692.940:3): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 578.521511] audit: type=1400 audit(1700704692.940:4): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" [ 585.887906] audit: type=1400 audit(1700704700.310:5): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 585.889291] audit: type=1400 audit(1700704700.310:6): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 585.890667] audit: type=1400 audit(1700704700.310:7): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" This is the result of installing SA6400-69057 on an Intel I5-1136G7 laptop. There is no kernel panic. The /dev/dri directory is not visible yet. I will proceed with more detailed settings related to transcoding.

[ 0.000000] Linux version 5.10.55+ (root@build7) (x86_64-pc-linux-gnu-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.38) #69057 SMP Sat Sep 23 21:43:07 CST 2023 [ 0.000000] Command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000400-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb8f9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb8fa000-0x00000000bb900fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bb901000-0x00000000bc41efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc41f000-0x00000000bc98ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc990000-0x00000000d685ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6860000-0x00000000d68f7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d68f8000-0x00000000d6937fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6938000-0x00000000d69f7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d69f8000-0x00000000daffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.837 MHz processor [ 0.002198] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.009672] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.015894] last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.022011] MTRR default type: uncachable [ 0.026443] MTRR fixed ranges enabled: [ 0.030613] 00000-9FFFF write-back [ 0.034625] A0000-BFFFF uncachable [ 0.038611] C0000-CFFFF write-protect [ 0.042866] D0000-DFFFF uncachable [ 0.046836] E0000-FFFFF write-protect [ 0.051065] MTRR variable ranges enabled: [ 0.055514] 0 base 0000000000 mask 7C00000000 write-back [ 0.061605] 1 base 0400000000 mask 7FE0000000 write-back [ 0.067680] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.073808] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.079866] 4 base 00DB800000 mask 7FFF800000 uncachable [ 0.085984] 5 base 041F800000 mask 7FFF800000 uncachable [ 0.092034] 6 base 041F600000 mask 7FFFE00000 uncachable [ 0.098143] 7 disabled [ 0.100950] 8 disabled [ 0.103776] 9 disabled [ 0.107149] x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel. [ 0.119751] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.127240] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.134902] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.163474] found SMP MP-table at [mem 0x000fd710-0x000fd71f] [ 0.169898] Using GB pages for direct mapping [ 0.228893] printk: log_buf_len: 33554432 bytes [ 0.233946] printk: early log buf free: 1044080(99%) [ 0.239423] RAMDISK: [mem 0x418c75000-0x41d3fffff] [ 0.245507] ACPI: Early table checksum verification disabled [ 0.251795] ACPI: RSDP 0x00000000D69C8000 000024 (v02 ALASKA) [ 0.258214] ACPI: XSDT 0x00000000D69C8078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.267700] ACPI: FACP 0x00000000D69D4B98 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.277173] ACPI: DSDT 0x00000000D69C8188 00CA0E (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.286694] ACPI: FACS 0x00000000D69F6080 000040 [ 0.291842] ACPI: APIC 0x00000000D69D4CA8 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.301401] ACPI: FPDT 0x00000000D69D4D20 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.310874] ACPI: SSDT 0x00000000D69D4D68 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.320355] ACPI: SSDT 0x00000000D69D52A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.329846] ACPI: MCFG 0x00000000D69D5D80 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.339405] ACPI: HPET 0x00000000D69D5DC0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.348930] ACPI: SSDT 0x00000000D69D5DF8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.358429] ACPI: SSDT 0x00000000D69D6168 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.367910] ACPI: DMAR 0x00000000D69D9650 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.377418] ACPI: Reserving FACP table memory at [mem 0xd69d4b98-0xd69d4ca3] [ 0.385243] ACPI: Reserving DSDT table memory at [mem 0xd69c8188-0xd69d4b95] [ 0.393103] ACPI: Reserving FACS table memory at [mem 0xd69f6080-0xd69f60bf] [ 0.400938] ACPI: Reserving APIC table memory at [mem 0xd69d4ca8-0xd69d4d19] [ 0.408729] ACPI: Reserving FPDT table memory at [mem 0xd69d4d20-0xd69d4d63] [ 0.416539] ACPI: Reserving SSDT table memory at [mem 0xd69d4d68-0xd69d52a0] [ 0.424399] ACPI: Reserving SSDT table memory at [mem 0xd69d52a8-0xd69d5d7f] [ 0.432217] ACPI: Reserving MCFG table memory at [mem 0xd69d5d80-0xd69d5dbb] [ 0.440087] ACPI: Reserving HPET table memory at [mem 0xd69d5dc0-0xd69d5df7] [ 0.447982] ACPI: Reserving SSDT table memory at [mem 0xd69d5df8-0xd69d6164] [ 0.455799] ACPI: Reserving SSDT table memory at [mem 0xd69d6168-0xd69d9648] [ 0.463626] ACPI: Reserving DMAR table memory at [mem 0xd69d9650-0xd69d9707] [ 0.471460] ACPI: Local APIC address 0xfee00000 [ 0.476519] No NUMA configuration found [ 0.480804] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.488266] NODE_DATA(0) allocated [mem 0x41d5f7000-0x41d5fafff] [ 0.495046] Zone ranges: [ 0.497850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.504716] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.511622] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.518496] Movable zone start for each node [ 0.523244] Early memory node ranges [ 0.527267] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.534243] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.541211] node 0: [mem 0x0000000000100000-0x00000000bb8f9fff] [ 0.548137] node 0: [mem 0x00000000bb901000-0x00000000bc41efff] [ 0.555121] node 0: [mem 0x00000000bc990000-0x00000000d685ffff] [ 0.562073] node 0: [mem 0x00000000d68f8000-0x00000000d6937fff] [ 0.569058] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.576051] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.583059] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.590900] On node 0 totalpages: 4151494 [ 0.595345] DMA zone: 64 pages used for memmap [ 0.600441] DMA zone: 23 pages reserved [ 0.604896] DMA zone: 3997 pages, LIFO batch:0 [ 0.610044] DMA32 zone: 13645 pages used for memmap [ 0.615676] DMA32 zone: 873257 pages, LIFO batch:63 [ 0.621302] Normal zone: 51160 pages used for memmap [ 0.627022] Normal zone: 3274240 pages, LIFO batch:63 [ 0.632858] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.632861] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.639430] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.657610] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.665890] On node 0, zone DMA32: 1393 pages in unavailable ranges [ 0.672596] On node 0, zone DMA32: 152 pages in unavailable ranges [ 0.679970] On node 0, zone DMA32: 18119 pages in unavailable ranges [ 0.737050] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.744155] On node 0, zone Normal: 2560 pages in unavailable ranges [ 0.751339] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.766214] ACPI: PM-Timer IO Port: 0x1808 [ 0.770764] ACPI: Local APIC address 0xfee00000 [ 0.775827] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.782423] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.790057] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.797119] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.804512] ACPI: IRQ0 used by override. [ 0.808896] ACPI: IRQ9 used by override. [ 0.813275] Using ACPI (MADT) for SMP configuration information [ 0.819835] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.825561] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.837315] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.842916] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.851374] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.859790] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.868194] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.876603] PM: hibernation: Registered nosave memory: [mem 0xbb8fa000-0xbb900fff] [ 0.885010] PM: hibernation: Registered nosave memory: [mem 0xbc41f000-0xbc98ffff] [ 0.893426] PM: hibernation: Registered nosave memory: [mem 0xd6860000-0xd68f7fff] [ 0.901859] PM: hibernation: Registered nosave memory: [mem 0xd6938000-0xd69f7fff] [ 0.910273] PM: hibernation: Registered nosave memory: [mem 0xd69f8000-0xdaffefff] [ 0.918682] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.927104] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.935562] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.943969] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.952376] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.960800] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.969215] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.977588] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.986029] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.994470] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 1.002886] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 1.011294] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 1.019701] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 1.028134] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 1.036568] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 1.043391] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.065763] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:4 nr_node_ids:1 [ 1.074641] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u524288 [ 1.081929] pcpu-alloc: s176664 r8192 d32232 u524288 alloc=1*2097152 [ 1.089000] pcpu-alloc: [0] 0 1 2 3 [ 1.093030] Built 1 zonelists, mobility grouping on. Total pages: 4086602 [ 1.100665] Policy zone: Normal [ 1.104135] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 1.152307] Synology Hardware Version: SA6400 [ 1.157175] Internal netif num: 2 [ 1.160984] Mac2: 94DE806D73B4 [ 1.164350] Mac1: 001132C7F4BE [ 1.167747] Serial Number: 1980PDN028952 [ 1.172135] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 1.187083] Vender format version: 2 [ 1.193870] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 1.301563] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.405802] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.594263] Memory: 15992372K/16605976K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 613348K reserved, 0K cma-reserved) [ 1.779687] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.865498] ftrace: allocating 32589 entries in 128 pages [ 1.970304] ftrace: allocated 128 pages with 1 groups [ 2.036833] rcu: Hierarchical RCU implementation. [ 2.098663] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. [ 2.185608] Rude variant of Tasks RCU enabled. [ 2.245096] Tracing variant of Tasks RCU enabled. [ 2.308019] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.408693] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.507776] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.585255] Console: colour dummy device 80x25 [ 2.643660] ACPI: Core revision 20200925 [ 2.695361] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 2.815588] APIC: Switch to symmetric I/O mode setup [ 2.880875] DMAR: Host address width 39 [ 2.931211] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 3.001005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 3.105102] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 3.174893] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 3.278994] DMAR: RMRR base: 0x000000dae83000 end: 0x000000dae91fff [ 3.361365] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 3.443736] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 3.527247] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 3.598177] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 3.712317] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 3.783293] x2apic enabled [ 3.818764] Switched APIC routing to cluster x2apic. [ 3.884855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 3.968584] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325531ed3c7, max_idle_ns: 440795306136 ns [ 4.107057] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.67 BogoMIPS (lpj=3491837) [ 4.108059] pid_max: default: 32768 minimum: 301 [ 4.109098] LSM: Security Framework initializing [ 4.110098] AppArmor: AppArmor initialized [ 4.111133] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.112124] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.113636] mce: CPU0: Thermal monitoring enabled (TM1) [ 4.114094] process: using mwait in idle threads [ 4.115063] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 4.116058] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 4.117062] Speculative Store Bypass: Vulnerable [ 4.118059] SRBDS: Vulnerable: No microcode [ 4.120357] Freeing SMP alternatives memory: 32K [ 4.224117] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 4.225312] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 4.226060] ... version: 3 [ 4.227058] ... bit width: 48 [ 4.228058] ... generic registers: 8 [ 4.229059] ... value mask: 0000ffffffffffff [ 4.230058] ... max period: 00007fffffffffff [ 4.231057] ... fixed-purpose events: 3 [ 4.232058] ... event mask: 00000007000000ff [ 4.233341] rcu: Hierarchical SRCU implementation. [ 4.235692] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 4.236173] smp: Bringing up secondary CPUs ... [ 4.237235] x86: Booting SMP configuration: [ 4.238061] .... node #0, CPUs: #1 #2 #3 [ 4.242684] smp: Brought up 1 node, 4 CPUs [ 4.244059] smpboot: Max logical packages: 1 [ 4.245062] smpboot: Total of 4 processors activated (27934.69 BogoMIPS) [ 4.248271] devtmpfs: initialized [ 4.250246] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 4.250269] PM: Registering ACPI NVS region [mem 0xbb8fa000-0xbb900fff] (28672 bytes) [ 4.252062] PM: Registering ACPI NVS region [mem 0xd6938000-0xd69f7fff] (786432 bytes) [ 4.253181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 4.254066] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 4.255161] pinctrl core: initialized pinctrl subsystem [ 4.257296] NET: Registered protocol family 16 [ 4.258278] audit: initializing netlink subsys (disabled) [ 4.259077] audit: type=2000 audit(1700666646.171:1): state=initialized audit_enabled=0 res=1 [ 4.260146] thermal_sys: Registered thermal governor 'step_wise' [ 4.261124] cpuidle: using governor ladder [ 4.393078] cpuidle: using governor menu [ 4.445164] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.544064] ACPI: bus type PCI registered [ 4.597059] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.682214] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 4.804063] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 4.894073] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 5.031190] PCI: Using configuration type 1 for base access [ 5.104203] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 5.200826] Kprobes globally optimized [ 5.251114] ACPI: Added _OSI(Module Device) [ 5.306084] ACPI: Added _OSI(Processor Device) [ 5.364059] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.426062] ACPI: Added _OSI(Processor Aggregator Device) [ 5.497059] ACPI: Added _OSI(Linux-Dell-Video) [ 5.555061] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 5.625059] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 5.715110] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 5.801591] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 5.883058] ACPI: Dynamic OEM Table Load: [ 5.936068] ACPI: SSDT 0xFFFF888100AEF400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 6.050062] ACPI: Dynamic OEM Table Load: [ 6.102067] ACPI: SSDT 0xFFFF888100AA4000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 6.216119] ACPI: Dynamic OEM Table Load: [ 6.269064] ACPI: SSDT 0xFFFF88810106A600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 6.384635] ACPI: Interpreter enabled [ 6.433096] ACPI: (supports S0 S4 S5) [ 6.481059] ACPI: Using IOAPIC for interrupt routing [ 6.547058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.667100] ACPI: Enabled 7 GPEs in block 00 to 3F [ 6.752102] ACPI: Power Resource [FN00] (off) [ 6.810258] ACPI: Power Resource [FN01] (off) [ 6.867257] ACPI: Power Resource [FN02] (off) [ 6.925081] ACPI: Power Resource [FN03] (off) [ 6.982249] ACPI: Power Resource [FN04] (off) [ 7.041060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 7.122075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 7.242062] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 7.337395] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 7.429063] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 7.537104] PCI host bridge to bus 0000:00 [ 7.591068] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 7.680060] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 7.769062] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 7.868059] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 7.966062] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 8.065059] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 8.163061] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 8.261060] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 8.360062] pci_bus 0000:00: root bus resource [bus 00-3e] [ 8.432086] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 8.511296] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 8.590081] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 8.679076] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 8.774068] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 8.848313] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 8.927076] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit] [ 9.016345] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 9.095086] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 9.185167] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 9.261183] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 9.340089] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f00f 64bit] [ 9.430161] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 9.510241] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 9.589080] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 9.672058] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff] [ 9.754070] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 9.827155] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 9.907141] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 9.986084] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff] [ 10.069186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 10.149268] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 10.228082] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 10.318062] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 10.398264] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 10.477188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 10.557098] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 10.619129] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 10.707469] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 10.786199] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 10.867099] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 10.929124] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 11.017350] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 11.096189] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 11.176097] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 11.238071] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 11.327081] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 11.406085] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff] [ 11.488192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 11.569290] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 11.648323] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 11.727083] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 11.800073] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 11.873073] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 11.947069] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 12.020071] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 12.093070] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff] [ 12.176124] pci 0000:00:1f.2: PME# supported from D3hot [ 12.244259] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 12.323089] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit] [ 12.413090] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 12.486401] acpiphp: Slot [1] registered [ 12.538069] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 12.603202] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000 [ 12.682102] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit] [ 12.772075] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f] [ 12.845232] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.932280] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 12.998067] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 13.078063] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 13.167216] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000 [ 13.246103] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit] [ 13.336064] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 13.416177] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 13.481069] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 13.572479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 13.675184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 13.781102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.884162] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.987158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15), disabled. [ 14.090161] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 14.195157] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled. [ 14.298160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 14.402772] iommu: Default domain type: Passthrough (set via kernel command line) [ 14.501114] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 14.502055] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 14.692071] pci 0000:00:02.0: vgaarb: bridge control possible [ 14.768059] vgaarb: loaded [ 14.803189] SCSI subsystem initialized [ 14.852104] libata version 3.00 loaded. [ 14.903125] pps_core: LinuxPPS API ver. 1 registered [ 14.968058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 15.088069] PTP clock support registered [ 15.140102] EDAC MC: Ver: 3.0.0 [ 15.181459] PCI: Using ACPI for IRQ routing [ 15.239197] PCI: pci_cache_line_size set to 64 bytes [ 15.304135] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 15.383060] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 15.462062] e820: reserve RAM buffer [mem 0xbb8fa000-0xbbffffff] [ 15.541062] e820: reserve RAM buffer [mem 0xbc41f000-0xbfffffff] [ 15.620065] e820: reserve RAM buffer [mem 0xd6860000-0xd7ffffff] [ 15.699060] e820: reserve RAM buffer [mem 0xd6938000-0xd7ffffff] [ 15.778062] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 15.857062] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 15.938161] clocksource: Switched to clocksource tsc-early [ 16.042098] VFS: Disk quotas dquot_6.6.0 [ 16.093681] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.184332] AppArmor: AppArmor Filesystem Enabled [ 16.246207] pnp: PnP ACPI init [ 16.286483] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 16.373443] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 16.463086] system 00:01: [io 0x0680-0x069f] has been reserved [ 16.540868] system 00:01: [io 0xffff] has been reserved [ 16.610648] system 00:01: [io 0xffff] has been reserved [ 16.680436] system 00:01: [io 0xffff] has been reserved [ 16.750219] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 16.828019] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 16.905807] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 16.983602] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 17.061394] system 00:01: [io 0x1800-0x18fe] has been reserved [ 17.139189] system 00:01: [io 0x164e-0x164f] has been reserved [ 17.216994] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.306280] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 17.392243] system 00:03: [io 0x1854-0x1857] has been reserved [ 17.470037] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 17.568737] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 17.646519] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 17.724304] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 17.802112] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.891871] pnp 00:05: [dma 0 disabled] [ 17.942309] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 18.028224] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 18.106013] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 18.196171] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 18.283116] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 18.370055] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 18.457004] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 18.543947] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 18.630896] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 18.717840] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 18.809365] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 18.896308] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 18.983257] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 19.074777] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 19.161725] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 19.248681] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 19.338449] pnp: PnP ACPI: found 8 devices [ 19.400792] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 19.517582] NET: Registered protocol family 2 [ 19.575279] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 19.681700] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 19.795052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 19.901843] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 19.999415] TCP: Hash tables configured (established 131072 bind 65536) [ 20.086469] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.175826] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.270944] NET: Registered protocol family 1 [ 20.328246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 20.393544] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 20.458743] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 20.538822] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 20.628069] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 20.693265] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 20.782509] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 20.863721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 20.944950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 21.035324] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 21.125710] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 21.216081] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 21.306462] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 21.397980] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 21.489506] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 21.562720] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 21.645093] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 21.727665] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 21.837507] pci 0000:00:02.0: pci_fixup_video+0x0/0xb0 took 107262 usecs [ 21.926759] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag [ 22.000081] pci 0000:02:00.0: quirk_msi_intx_disable_qca_bug+0x0/0x10 took 71596 usecs [ 22.104272] PCI: CLS 64 bytes, default 64 [ 26.858187] Trying to unpack rootfs image as initramfs... [ 27.012029] Freeing initrd memory: 73260K [ 27.064716] DMAR: No ATSR found [ 27.106021] DMAR: dmar0: Using Queued invalidation [ 27.168998] DMAR: dmar1: Using Queued invalidation [ 27.513566] pci 0000:00:00.0: Adding to iommu group 0 [ 27.580018] pci 0000:00:02.0: Adding to iommu group 1 [ 27.646469] pci 0000:00:03.0: Adding to iommu group 2 [ 27.712817] pci 0000:00:14.0: Adding to iommu group 3 [ 27.779178] pci 0000:00:16.0: Adding to iommu group 4 [ 27.845628] pci 0000:00:19.0: Adding to iommu group 5 [ 27.911981] pci 0000:00:1a.0: Adding to iommu group 6 [ 27.978335] pci 0000:00:1b.0: Adding to iommu group 7 [ 28.044690] pci 0000:00:1c.0: Adding to iommu group 8 [ 28.111044] pci 0000:00:1c.3: Adding to iommu group 9 [ 28.177397] pci 0000:00:1c.4: Adding to iommu group 10 [ 28.244895] pci 0000:00:1d.0: Adding to iommu group 11 [ 28.312411] pci 0000:00:1f.0: Adding to iommu group 12 [ 28.379994] pci 0000:00:1f.2: Adding to iommu group 12 [ 28.447489] pci 0000:00:1f.3: Adding to iommu group 12 [ 28.514990] pci 0000:02:00.0: Adding to iommu group 13 [ 28.582484] pci 0000:03:00.0: Adding to iommu group 14 [ 28.650065] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 28.734724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 28.819387] software IO TLB: mapped [mem 0x00000000d2860000-0x00000000d6860000] (64MB) [ 28.923631] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 29.027812] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 29.103308] RAPL PMU: hw unit of domain package 2^-14 Joules [ 29.177671] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 29.248598] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 29.325974] Initialise system trusted keyrings [ 29.415843] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 29.505227] Key type asymmetric registered [ 29.559047] Asymmetric key parser 'x509' registered [ 29.623135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 29.720354] io scheduler mq-deadline registered [ 29.779842] io scheduler kyber registered [ 29.832535] io scheduler bfq registered [ 29.885172] Monitor-Mwait will be used to enter C-1 state [ 29.956282] Monitor-Mwait will be used to enter C-2 state [ 30.027307] ACPI: \_PR_.CPU0: Found 2 idle states [ 30.089768] ACPI: \_PR_.CPU1: Found 2 idle states [ 30.152042] ACPI: \_PR_.CPU2: Found 2 idle states [ 30.214337] ACPI: \_PR_.CPU3: Found 2 idle states [ 30.359094] tsc: Refined TSC clocksource calibration: 3491.912 MHz [ 30.440381] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255787006b, max_idle_ns: 440795244845 ns [ 31.041789] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 31.125433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 31.227277] printk: console [ttyS0] enabled [ 31.236245] printk: bootconsole [uart8250] disabled [ 31.423005] clocksource: Switched to clocksource tsc [ 31.430954] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 31.437773] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 31.462712] brd: module loaded [ 31.465961] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204) [ 31.481682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.491960] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.507546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.517828] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.533445] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.548998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.559349] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.574954] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.590477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.600765] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 31.607168] Loading iSCSI transport class v2.0-870. [ 31.627149] rdac: device handler registered [ 31.646050] i2c /dev entries driver [ 31.649684] ahci 0000:00:1f.2: version 3.0 [ 31.654283] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 31.662486] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 31.669875] Cannot find slot node of this ata_port. [ 31.674838] Cannot find slot node of this ata_port. [ 31.694511] scsi host0: ahci [ 31.717114] scsi host1: ahci [ 31.726863] scsi host2: ahci [ 31.730660] scsi host3: ahci [ 31.734317] scsi host4: ahci [ 31.741653] scsi host5: ahci [ 31.744779] ata1 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 29 [ 31.752375] ata2 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 29 [ 31.759910] ata3 : DUMMY [ 31.762480] ata4 : DUMMY [ 31.765038] ata5 : DUMMY [ 31.767604] ata6 : DUMMY [ 31.770268] ata3 : port disabled [ 31.770376] ata4 : port disabled [ 31.771803] NET: Registered protocol family 17 [ 31.771823] Key type dns_resolver registered [ 31.772068] ata5 : port disabled [ 31.772073] Invalid parameter [ 31.772159] ata6 : port disabled [ 31.772164] Invalid parameter [ 31.773571] Invalid parameter [ 31.801193] Invalid parameter [ 31.804824] IPI shorthand broadcast: enabled [ 31.809183] sched_clock: Marking stable (30306208278, 1502954689)->(34868485575, -3059322608) [ 31.817937] registered taskstats version 1 [ 31.822111] Loading compiled-in X.509 certificates [ 31.827038] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 31.840081] redpill: loading out-of-tree module taints kernel. [ 31.846100] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 32.076409] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.083020] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 32.090929] ata2.00: ATA-9: ADATA SP600, 2.3, max UDMA/100 [ 32.096510] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.103390] ata2.00: SN:03912202500600000028 [ 32.107753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.114533] ata1.00: ATA-9: ADATA SP600, 2.9, max UDMA/100 [ 32.120137] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.120877] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 32.127003] ata1.00: SN:2E3520001576 [ 32.127072] ata2.00: configured for UDMA/100 [ 32.137262] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 32.140843] Invalid parameter [ 32.145173] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 32.157227] ata1.00: configured for UDMA/100 [ 32.159840] page_owner is disabled [ 32.169751] Invalid parameter [ 32.174100] AppArmor: AppArmor sha1 policy hashing enabled [ 32.177543] ata1.00: Find SSD disks. [ADATA SP600] [ 32.191217] scsi 0:0:0:0: Direct-Access ADATA SP600 2.9 PQ: 0 ANSI: 5 [ 32.200363] sd 0:0:0:0: got sata disk[0] [ 32.200467] ata2.00: Find SSD disks. [ADATA SP600] [ 32.204552] sd 0:0:0:0: [sata1] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.209405] scsi 1:0:0:0: Direct-Access ADATA SP600 2.3 PQ: 0 ANSI: 5 [ 32.217073] sd 0:0:0:0: [sata1] Write Protect is off [ 32.226213] sd 1:0:0:0: got sata disk[1] [ 32.231008] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 32.231114] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.235247] sd 1:0:0:0: [sata2] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.256981] sd 1:0:0:0: [sata2] Write Protect is off [ 32.257833] sata1: p1 p2 p3 < p5 > [ 32.262005] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 10 [ 32.266385] sd 0:0:0:0: [sata1] Attached SCSI disk [ 32.270920] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.291920] sata2: p1 p2 [ 32.295871] sd 1:0:0:0: [sata2] Attached SCSI disk [ 32.305701] Freeing unused kernel image (initmem) memory: 1344K [ 32.318469] Write protecting the kernel read-only data: 18432k [ 32.325473] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 32.332400] Freeing unused kernel image (rodata/data gap) memory: 344K [ 32.339001] rodata_test: all tests were successful [ 32.343855] Run /init as init process [ 32.347551] with arguments: [ 32.350540] /init [ 32.352838] withefi [ 32.355315] DiskIdxMap [ 32.358030] sataboot2 [ 32.360673] SataPortMap [ 32.363498] with environment: [ 32.366678] HOME=/ [ 32.369062] TERM=linux [ 32.371808] pid=0x5583 [ 32.374554] syno_port_thaw=1 [ 32.377814] SasIdxMap=0 [ 32.380649] vid=0x0781 [ 32.383387] HddHotplug=0 [ 32.386326] syno_hdd_detect=0 [ 32.389695] syno_hdd_powerup_seq=0 [ 32.894082] random: crng init done [ 33.066908] ACPI: bus type USB registered [ 33.071043] usbcore: registered new interface driver usbfs [ 33.076657] usbcore: registered new interface driver hub [ 33.082064] usbcore: registered new device driver usb [ 33.141176] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.146503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 33.155122] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009010 [ 33.164361] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 33.171902] hub 1-0:1.0: USB hub found [ 33.175745] hub 1-0:1.0: 14 ports detected [ 33.184702] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.190049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 33.197538] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 33.203942] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 33.212593] hub 2-0:1.0: USB hub found [ 33.216442] hub 2-0:1.0: 6 ports detected [ 33.457092] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 33.615666] Got empty serial number. Generate serial number from product. [ 33.748139] usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 38.270083] DMABUF-COMPAT BACKPORTED INIT [ 38.275337] DMAHEAP BACKPORTED INIT [ 38.280228] Loading dma-buf modules backported from I915-23.8.20 [ 38.287669] DMA BUF backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.300135] [drm] DRM BACKPORTED INIT [ 38.307277] [drm] DRM_KMS_HELPER BACKPORTED INIT [ 38.313629] I915 COMPAT BACKPORTED INIT [ 38.318976] Loading I915 modules backported from I915-23.8.20 [ 38.326187] I915 Backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.356418] [drm] I915 BACKPORTED INIT [ 38.362040] i915 0000:00:02.0: [drm] GT count: 1, enabled: 1 [ 38.368656] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 38.376268] type mismatch for e0000000,10000000 old: write-back new: write-combining [ 38.384996] Failed to add WC MTRR for [00000000bec5d527-00000000ac95f8d5]; performance may suffer. [ 38.385042] i915 0000:00:02.0: [drm] Transparent Hugepage support is recommended for optimal performance when IOMMU is enabled! [ 38.407012] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 38.417437] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 38.442136] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 38.450485] #PF: supervisor instruction fetch in kernel mode [ 38.456171] #PF: error_code(0x0010) - not-present page [ 38.462750] PGD 0 P4D 0 [ 38.465317] Oops: 0010 [#1] SMP NOPTI [ 38.469035] CPU: 1 PID: 4450 Comm: modprobe Tainted: G OE 5.10.55+ #69057 [ 38.477136] Hardware name: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 38.486024] RIP: 0010:0x0 [ 38.488683] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.495622] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.500909] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.508101] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.515302] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.522512] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.529716] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.536926] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.545064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.550888] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.558099] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.565302] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 38.572503] Call Trace: [ 38.575203] [<ffffffffa0281df5>] vma_get_pages+0x95/0x130 [i915] [ 38.582755] [<ffffffffa0284360>] ? i915_vma_pin_ww+0x370/0x9e0 [i915] [ 38.590526] [<ffffffff81226992>] ? __kmalloc+0x142/0x2e0 [ 38.596166] [<ffffffffa0284b24>] ? i915_ggtt_pin_for_gt+0x154/0x200 [i915] [ 38.604560] [<ffffffffa0218a5b>] ? intel_gt_init+0xab/0x930 [i915] [ 38.612298] [<ffffffffa01dde6e>] ? fwtable_read32+0x8e/0x210 [i915] [ 38.620072] [<ffffffffa01dd819>] ? gen6_write32+0x59/0x1e0 [i915] [ 38.627761] [<ffffffffa02772f8>] ? i915_gem_init+0x208/0x280 [i915] [ 38.635535] [<ffffffffa01b3a24>] ? i915_driver_probe+0x14f4/0x1d70 [i915] [ 38.643740] [<ffffffff8145360f>] ? create_pinctrl+0x2f/0x430 [ 38.649691] [<ffffffffa01c179b>] ? i915_pci_probe+0x9b/0x3d0 [i915] [ 38.657358] [<ffffffff8147062e>] ? local_pci_probe+0x3e/0x70 [ 38.663149] [<ffffffff814716f1>] ? pci_device_probe+0xd1/0x180 [ 38.669126] [<ffffffff81533c4d>] ? really_probe+0xed/0x420 [ 38.674783] [<ffffffff8153424e>] ? driver_probe_device+0x4e/0xa0 [ 38.680919] [<ffffffff81534521>] ? device_driver_attach+0xa1/0xb0 [ 38.687183] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.693431] [<ffffffff815345a2>] ? __driver_attach+0x72/0x100 [ 38.699308] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.705548] [<ffffffff81531aa1>] ? bus_for_each_dev+0x61/0x90 [ 38.711458] [<ffffffff81532faf>] ? bus_add_driver+0x10f/0x1c0 [ 38.717352] [<ffffffff81534e59>] ? driver_register+0x89/0xd0 [ 38.723329] [<ffffffffa047c033>] ? __init_backport+0x33/0x8c [i915] [ 38.730959] [<ffffffffa047c000>] ? 0xffffffffa047c000 [ 38.736151] [<ffffffff81000bfd>] ? do_one_initcall+0x3d/0x1c0 [ 38.742043] [<ffffffff810ff5d2>] ? do_init_module+0x22/0x250 [ 38.747869] [<ffffffff81227b5e>] ? kmem_cache_alloc_trace+0x12e/0x2a0 [ 38.754453] [<ffffffff810ff60a>] ? do_init_module+0x5a/0x250 [ 38.760268] [<ffffffff811023f8>] ? __do_sys_finit_module+0x88/0xb0 [ 38.766627] [<ffffffff81787853>] ? do_syscall_64+0x33/0x40 [ 38.772267] [<ffffffff8180007c>] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 38.779379] Modules linked in: i915(OE+) i2c_algo_bit i915_compat(OE) drm_mipi_dsi(OE) intel_gtt(OE) drm_kms_helper(OE) drm(OE) drm_panel_orientation_quirks(OE) hdmi(OE) dmabuf(OE) xhci_pci xhci_hcd usbcore usb_common [ 38.800237] CR2: 0000000000000000 [ 38.803619] ---[ end trace 5e832f8482f0d9cf ]--- [ 38.808637] RIP: 0010:0x0 [ 38.811294] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.818217] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.823485] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.830668] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.837872] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.845082] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.852283] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.859505] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.867711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.873526] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.880729] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.887957] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.002725] e1000e: Intel(R) PRO/1000 Network Driver [ 40.007740] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 40.014090] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 40.104357] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 40.196228] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:6d:73:b4 [ 40.204249] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 40.211206] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 42.441356] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) [ 43.488442] alx 0000:02:00.0 eth1: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:32:c7:f4:be] [ 43.921881] synobios open /dev/ttyS1 success [ 43.926217] Fail to get disk 1 led type [ 43.930084] Fail to get disk 2 led type [ 43.933982] Fail to get disk 3 led type [ 43.937856] Fail to get disk 4 led type [ 43.941730] Fail to get disk 5 led type [ 43.945614] Fail to get disk 6 led type [ 43.949506] Fail to get disk 7 led type [ 43.953404] Fail to get disk 8 led type [ 43.957295] Fail to get disk 9 led type [ 43.961176] Fail to get disk 10 led type [ 43.965148] Fail to get disk 11 led type [ 43.969126] Fail to get disk 12 led type [ 43.973140] 2023-11-22 15:24:50 UTC [ 43.976667] synobios: load, major number 201 [ 43.981004] Brand: Synology [ 43.983844] Model: SA-6400 [ 43.986584] synobios cpu_arch proc entry initialized [ 43.991599] synobios crypto_hw proc entry initialized [ 43.996696] synobios syno_platform proc entry initialized [ 44.013547] Module [epyc7002_synobios] is removed. [ 44.018527] synobios: unload [ 44.765760] md: md0 stopped. [ 44.770835] md: kicking non-fresh sata2p1 from array! [ 44.783741] md/raid1:md0: active with 1 out of 4 mirrors [ 44.791758] md0: detected capacity change from 0 to 8589869056 [ 45.463459] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 45.550406] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 45.787931] Module [r8168] is removed. [ 46.005574] loop: module loaded [ 49.300658] Module [rp] is removed. [ 49.497821] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 49.571437] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.571441] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.580105] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.593332] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.602500] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.611089] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.720133] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 53.346840] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 53.346845] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.356463] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.495386] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 53.522178] systemd[1]: Detected architecture x86-64. [ 53.527668] systemd[1]: Set hostname to <SA6400>. [ 55.691746] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 55.745024] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 55.759345] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 55.774547] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. [ 55.787073] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 55.805231] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-fixed-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory. [ 55.822149] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 55.941782] zram: Added device: zram0 [ 55.950711] zram: Added device: zram1 [ 55.951112] systemd-journald[6879]: Received request to flush runtime journal from PID 1 [ 55.962014] zram: Added device: zram2 [ 55.975264] zram: Added device: zram3 [ 55.975518] cryptd: max_cpu_qlen set to 1000 [ 56.009856] AVX2 version of gcm_enc/dec engaged. [ 56.015597] AES CTR mode by8 optimization enabled [ 56.064282] md: md1 stopped. [ 56.071298] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 56.084383] md/raid1:md1: active with 1 out of 4 mirrors [ 56.095911] NET: Registered protocol family 10 [ 56.102151] Segment Routing with IPv6 [ 56.102297] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 56.106474] md1: detected capacity change from 0 to 2147418112 [ 56.136840] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 56.188835] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 56.195260] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 56.224576] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 56.231733] Copyright(c) 2007 - 2020 Intel Corporation. [ 56.262695] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 56.270434] Copyright(c) 1999 - 2020 Intel Corporation. [ 56.283148] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 56.297401] zram0: detected capacity change from 0 to 2468347904 [ 56.318106] Adding 2410492k swap on /dev/zram0. Priority:1 extents:1 across:2410492k SS [ 56.330790] zram1: detected capacity change from 0 to 2468347904 [ 56.354163] Adding 2410492k swap on /dev/zram1. Priority:1 extents:1 across:2410492k SS [ 56.366819] zram2: detected capacity change from 0 to 2468347904 [ 56.405165] Adding 2410492k swap on /dev/zram2. Priority:1 extents:1 across:2410492k SS [ 56.416844] zram3: detected capacity change from 0 to 2468347904 [ 56.479964] qed_init called [ 56.483764] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 56.490725] creating debugfs root node [ 56.508692] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 56.518129] Adding 2410492k swap on /dev/zram3. Priority:1 extents:1 across:2410492k SS [ 56.570840] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 56.581469] creating debugfs root node [ 56.740029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 56.748574] ehci-pci: EHCI PCI platform driver [ 56.753350] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 56.758656] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 56.766114] ehci-pci 0000:00:1a.0: debug port 2 [ 56.774635] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 56.781536] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 56.795090] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 56.801347] hub 3-0:1.0: USB hub found [ 56.805199] hub 3-0:1.0: 2 ports detected [ 56.809991] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 56.815296] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 56.822820] ehci-pci 0000:00:1d.0: debug port 2 [ 56.831306] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 56.838209] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000 [ 56.850090] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 56.856347] hub 4-0:1.0: USB hub found [ 56.860164] hub 4-0:1.0: 2 ports detected [ 56.867917] uhci_hcd: USB Universal Host Controller Interface driver [ 56.919905] synobios open /dev/ttyS1 success [ 56.925683] Fail to get disk 1 led type [ 56.930962] Fail to get disk 2 led type [ 56.930964] Fail to get disk 3 led type [ 56.930971] Fail to get disk 4 led type [ 56.946798] Fail to get disk 5 led type [ 56.952096] Fail to get disk 6 led type [ 56.957375] Fail to get disk 7 led type [ 56.962620] Fail to get disk 8 led type [ 56.962622] Fail to get disk 9 led type [ 56.962624] Fail to get disk 10 led type [ 56.962630] Fail to get disk 11 led type [ 56.981062] Fail to get disk 12 led type [ 56.985110] 2023-11-22 15:25:3 UTC [ 56.989861] synobios: load, major number 201 [ 56.995575] Brand: Synology [ 56.999783] Model: SA-6400 [ 56.999793] synobios cpu_arch proc entry initialized [ 57.008936] synobios crypto_hw proc entry initialized [ 57.014053] synobios syno_platform proc entry initialized [ 57.095088] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 57.117095] usb-storage 2-5:1.0: USB Mass Storage device detected [ 57.123596] scsi host6: usb-storage 2-5:1.0 [ 57.128026] usbcore: registered new interface driver usb-storage [ 57.135093] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 57.145762] usbcore: registered new interface driver uas [ 57.254449] Got empty serial number. Generate serial number from product. [ 57.262186] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.581794] hub 3-1:1.0: USB hub found [ 57.585728] hub 3-1:1.0: 6 ports detected [ 57.589800] Got empty serial number. Generate serial number from product. [ 57.597484] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.607718] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1 [ 57.618270] hub 4-1:1.0: USB hub found [ 57.622201] hub 4-1:1.0: 8 ports detected [ 57.908805] Module [adt7475] is removed. [ 57.919183] Module [hwmon_vid] is removed. [ 58.137477] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 58.146654] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 58.147084] sd 6:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 58.161159] sd 6:0:0:0: [synoboot] Write Protect is off [ 58.166454] sd 6:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 58.172459] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 58.196004] synoboot: synoboot1 synoboot2 synoboot3 [ 58.203013] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 59.934465] alx 0000:02:00.0 eth1: NIC Up: 1 Gbps Full [ 59.939924] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 59.972117] Module [adt7475] is removed. [ 60.063404] Module [hwmon_vid] is removed. [ 60.473001] ext2: synoboot2 mounted, process=synoencvolume [ 60.481681] ext4: synoboot2 mounted, process=synoencvolume [ 60.512786] vfat: synoboot2 mounted, process=synoencvolume [ 60.548190] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 60.560842] synoboot2 unmounted, process=synoencvolume [ 61.171320] 8021q: 802.1Q VLAN Support v1.8 [ 61.454819] md: md2 stopped. [ 61.484101] md/raid1:md2: active with 1 out of 1 mirrors [ 61.492390] md2: detected capacity change from 0 to 21030961152 [ 62.143204] Module [adt7475] is removed. [ 62.159280] Module [hwmon_vid] is removed. [ 65.645110] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 66.785068] raid6: avx2x4 gen() 7478 MB/s [ 66.806065] raid6: avx2x4 xor() 3991 MB/s [ 66.827066] raid6: avx2x2 gen() 7145 MB/s [ 66.848065] raid6: avx2x2 xor() 4395 MB/s [ 66.869067] raid6: avx2x1 gen() 6675 MB/s [ 66.890064] raid6: avx2x1 xor() 4048 MB/s [ 66.911069] raid6: sse2x4 gen() 3865 MB/s [ 66.932068] raid6: sse2x4 xor() 2426 MB/s [ 66.953066] raid6: sse2x2 gen() 4092 MB/s [ 66.974065] raid6: sse2x2 xor() 2447 MB/s [ 66.995068] raid6: sse2x1 gen() 3309 MB/s [ 67.016067] raid6: sse2x1 xor() 2173 MB/s [ 67.020398] raid6: using algorithm avx2x4 gen() 7478 MB/s [ 67.025863] raid6: .... xor() 3991 MB/s, rmw enabled [ 67.030874] raid6: using avx2x2 recovery algorithm [ 67.037807] xor: automatically using best checksumming function avx [ 67.166592] Btrfs loaded, crc32c=crc32c-intel [ 68.350853] BTRFS: device label 2023.11.21-13:13:28 v69057 devid 1 transid 63 /dev/mapper/cachedev_0 scanned by mount (10695) [ 68.362892] BTRFS info (device dm-2): enabling auto syno reclaim space [ 68.369524] BTRFS info (device dm-2): enabling ssd optimizations [ 68.375612] BTRFS info (device dm-2): using free space tree [ 68.381264] BTRFS info (device dm-2): using block group cache tree [ 68.387548] BTRFS info (device dm-2): has skinny extents [ 68.398427] BTRFS info (device dm-2): root of syno feature tree is null [ 71.582720] Synotify use 16384 event queue size [ 71.587781] Synotify use 16384 event queue size [ 72.087538] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 72.732471] ata1.00: configured for UDMA/100 [ 72.736798] ata1 : EH complete [ 72.739896] Invalid parameter [ 72.903216] ext2: synoboot2 mounted, process=synopkicompatsy [ 72.915727] ext4: synoboot2 mounted, process=synopkicompatsy [ 72.922754] vfat: synoboot2 mounted, process=synopkicompatsy [ 72.959588] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 72.975144] synoboot2 unmounted, process=synopkicompatsy [ 74.288639] ata2.00: configured for UDMA/100 [ 74.292985] ata2 : EH complete [ 74.296071] Invalid parameter [ 87.493354] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(213ba3a11353). [ 88.568726] syno_extent_pool: module license 'Proprietary' taints kernel. [ 88.583112] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 88.657758] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 88.669862] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 88.679873] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 89.873980] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 89.882341] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 89.890200] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 89.899348] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 89.907738] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 89.915752] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 90.861827] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 91.442369] The mempool could be used by other devices [ 91.828782] ext2: synoboot1 mounted, process=syno_bios_log_c [ 91.859900] ext4: synoboot1 mounted, process=syno_bios_log_c [ 91.907407] vfat: synoboot1 mounted, process=syno_bios_log_c [ 91.991823] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 92.045526] synoboot1 unmounted, process=syno_bios_log_c [ 93.057033] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 98.575998] fuse: init (API version 7.32) Haswell, which is an old device, is said to be impossible to debug, but I am uploading the results of dmesg -w for reference. I tested it with the last test build you shared.

Has anyone had issues with HDD hibernation on DSM 7.1 on a DS918+ setup. I've checked the scemd.log and it shows the below, i read in the past there was an issue with the HDD led stopping the drives going to sleep but the error was more obvious then the below just mentions the hdd LED. It says waking but they don't appear to go to sleep and also thought there would be a corresponding log entry for sleeping. I've set the drives to hibernate after 10 mins and also enabled logging. I guess also as it's only showing hibernation for seconds the drive never really spins down so that's why i can't tell. Maybe need to figure out what's keeping it awake. # tail -f /var/log/scemd.log 2022-06-28T18:28:21+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 18:27:59] 2022-06-28T18:28:24+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T18:39:22+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 18:39:00] 2022-06-28T18:39:24+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T18:58:46+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 18:58:24] 2022-06-28T18:58:48+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T19:09:51+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 19:09:29] 2022-06-28T19:09:53+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T19:29:31+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 19:29:09] 2022-06-28T19:29:33+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T20:00:06+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 19:59:44] 2022-06-28T20:00:10+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T20:11:27+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 20:11:05] 2022-06-28T20:11:30+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T20:28:07+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 20:27:45] 2022-06-28T20:28:11+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED 2022-06-28T20:39:24+00:00 nas scemd[12467]: event_disk_hibernation_handler.c:47 The internal disks wake up, hibernate from [Jun 28 20:39:00] 2022-06-28T20:39:27+00:00 nas scemd[12467]: led.c:334 Enable power & phy LED

Hi there, I installed in the past 2 old NASs with DSM 7.1 (with tinycore redpill) which have been working for months now, without any issues. I would like now to install it on a desktop pc(that I have laying around for some years) that still has some power in it and replace a small and slow 1-bay Synology nas The hardware: Asus motherboard Z97(up to 12 SATA drives can be connected) Core i7-4790K (4.0Ghz) 32 Gb RAM 4x 1Tb harddrives( I will be hadding more drives with higher capacity (4Tb) once the systems is running) 3x 500Gb SSD(maybe use it for cache) 1x GeFORCE GTX 770 Installation Steps Flash tinycore on a usb stick boot the tiny-core and bring a terminal up ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DVA3221 realmac ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh backup now ./rploader.sh build denverton-7.1.0-42661 sudo reboot I am able to find the NAS with http://find.synology.com/ Then I download the pat image https://www.synology.com/en-global/support/download/DVA3221?version=7.1#system](https://www.synology.com/en-global/support/download/DVA3221?version=7.1#system)** Now the system is running stable for some weeks now. The only issue I am facing is with power management. I would like to put the hdd to hibernate in order to save some power ... and even turn the system off when not being used longer than 2 hours. Where should I been looking for?

Hi, i install xpenology loader 1,03b DSM v. 6.2-23739 HW: HP Pro 3500 MT CPU:I3-3220 RAM:8 GB Exist in xpenology hibernation mode S2/S3 ? now when i set hibernation in control panel, e.g. 30 minutes for HDD and 30 min for auto shutdown i can wake up only with magic packet app. when i set only hibernation HDD, the HW consuption still more than 25 W (i want turn down this consuption). My DS115j when it is in sleep mode turn off fan but Samsung tv still see this NAS and wake up it. But Xpenology when i set Auto poweroff (HDD hibernation 30min + auto poweroff 30min) it is not visible for any devices in network...

You've grown the problem too far out of hand. It seems that Synology experts have tried the method not recommended. The first thing I mentioned was disk hibernation. This should not be attempted. Moreover, power saving on USB disk is even worse. If you have no choice but to use an external disk, Synology recommends ESATA instead of USB interface. It seems risky to you to proceed with building the DS3622xs+ 7.2-64570 with a USB disk. You said you have a N54L, do you have 4 internal HDDs and 2 USB HDDs? Remove the USB-type HDD even now so that it does not participate in DSM update. Only 4 built-in SATA HDDs can be used to stably update, and USB HDDs can be installed afterwards. (I recommend avoiding it if possible.) As far as is known, N54L with old AMD CPU is said to work only in Jot. Last time I finished distributing Jot available on 7.2-64570 on M SHELL, and on page 34 of this topic you responded that you put the new feature to good use. I don't understand why it has to stay at 7.2-64561 again now. Wasn't the migration from DS3622xs+ to 7.2-64570 successful last time? Please let me know what I am misunderstanding.

I haven't tried changing the disk hibernation mode myself. I didn't think to try it because I only knew that it had a bad effect on disk life. I only know that there is a way to apply it since DSM 7.2.

On my DS918+ HDD works every 2 seconds and write something on it. In similar time was installed 7 firmware and latest update to it. Also SMART test was completed, thinking that there are some bad sectors exists, but it does not help and DSM do not go to sleeping mode. Advises from Synology does not help and it continue https://kb.synology.com/ru-ru/DSM/tutorial/What_stops_my_Synology_NAS_from_entering_System_Hibernation After reviewing some logs have found, that one process agetty try to write data on HDD, get error and after two seconds try to write again and this is endless. Please advise who knows how to stop this process and make normal hibernation.

Hello, I just succeed to install my Xpenology using TCRP on ESXI 6.7 (due to hardware limitation, my SAS card isn't supported by ESXI 7+), using my raw disks directly into DSM (2 disks RAID managed by DSM, 2 disk in basic mode). I tried to activate the hibernation to the unused disks from DSM, but without success, and since the firmwares of the disks are generated by ESXI, I'm looking if I have something to manage on the ESXI interface to allow the disks to sleep... Thanks!!

schau dir die logs an, evtl. kann man da etwas sehen außerdem wäre zu hinterfragen ob es wirklich das system steht oder du nur nicht mehr über netzwerk dran kommst falls du irgendwas mit power schedule aktiv hast abschalten, bei hdd hibernation auch alles abschalten ich würde einen extra usb stick und einzelplatte nehmen und mal mit dem gleichen system (1621?) eine frische installtion mit defaults versuchen, wenn sich das reproduzieren lässt mal auf 3622 wechseln und sehen oh es da auch passiert, von usb booten und ein hardware stress test programm 1-2 tage laufen lassen um zu sehen ob es da etwas gibt wenn der ram 2 riegel sind dann mal nur mit einem versuchen und dann den anderen, netzteil wechseln wenn möglich (wenn man eins hat sind das nur ein paar handgriffe)

Same here.. I can't seem to get the drives to hibernate and by extension the whole system via the 'auto poweroff' feature. Things I've tried so far: Editing the file '/etc.defaults/syslog-ng/patterndb.d/scemd.conf' so that '/var/log/scemd.log points to /dev/null' Using hdparm -Y /dev/sdx to put the drives on standby mode - they quickly resume, even drives not used by DSM (Uninitialized) Tried this supposed solution - it didn't work Wiped the drive clean and reinstalled DSM from scratch then tested with only the default apps installed Specs of my system: Motherboard: Gigabyte GA-H61M-DS2 Processor: i5-3470 Drive: Hitachi HTS541680J9SA00 Loader: tinycore-redpill-uefi.v0.9.4.0 Platform: DS3622xs+ DSM Version: DSM 7.1.1-42962 Update 3 (Manually updated from Update 1 via ./rploader.sh postupdate) Something else I tried.. I ran 'cat /sys/power/state' which returned 'disk' meaning that system hibernation is supported. Naturally I ran 'echo disk > /sys/power/state' as root which put the system into hibernation, so it works! I was able to wake it up with a magic packet with a notification popping up that the NAS was shutdown improperly. My scemd.log is full of these errors which get logged every few seconds as from the screenshot below.

Hello, i've already read some posts about hibernation but couldn't find the answer i'm searching for. I'm intersted in HDD hibernation mode because I don't use my DS daily and it's in my living room. I can clearly hear the disks spinning while watching a movie etc. The function in the control panel isn't working as expected, I only could find one entry where the DS stated "Internal disks woke up from hibernation." The rest of the time the disks were spinning even if the DS wasn't in use. The only package i have installed is "Synology Drive Server: When there are any devices connected to Synology Drive server." and i'm using DDNS - DSM version prior update: DSM 6.2.2-24922 UPDATE 5 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: 0.8_syno ds918+ - Installation type: BAREMETAL - ASRock J4105-ITX In this post is an "fix" described how to get hibernation to work. But i'm not sure what happens after the reboot because I have already used a custom extra.lzma used to get my network card to work.

Hello @asheenlevrai I am quite sure that hibernation just only spins down the disks . I think the original synology hardware use special sensors for controlling the fan speed via pwm, so in that way you have to build additional kernel modules according you motherboard and modify the DSM scripts that controls the fan speed (better check your motherboard bios for quiet mode or similar powersave modes) I checked this symlink with DS3617xs and DS3622xs+ and it worked fine. As for the update from DSM7.1.0-42661 to DSM7.1.1-42962 , you can manually update to DSM7.1.1-42962 , boot to TCRP loader and run ./rploader postupdate in order to recreate initrd and patch the kernel image but i lack of such an experience .

Hey What is the current status about hibernation? supported? broken? Thanks

Hello @Sak1s Is this trick "universal"? I need to enable hibernation on the following rig: - DS3622xs+, TCRP 0.9.3 with friend, DSM7.1.0-42661 (I'd like to upgrade DSM7.1.1-42962 if that's possible, still looking into it) - bare metal - Asus MB with Z77 chipset - i7-3770 (Ivy Bridge) Does hibernation only spin down the disks or can it also stop the fans? (case fans, CPU fan, ...) Thanks -a-

Hi. From my point of view: Question 1. I would go with jbod. I think you know that raid is not a replacement for backup and raid 5 will wear ssd faster so if you have backups, the chance for one ssd to fail, if they are from a good known brand, it's unlikely. I have a jbod with 2 and 4 tb ssd and it's doing fine. You can also install Petaspace, make storage pools and volume for each ssd and create a shared folder with Petaspace so that all ssd will be like one volume. With Petaspace, all data will be spread across all ssds, like one file on 1st ssd, second file on 2nd and so on. With jbod data is filled till the disk is full, then it moves to the second one. Question 2. You can make any storage pool you need, but be advised, when created, all data stored will be deleted Question 3. exFat is supported on external drives only. Internal you can have either btrfs or ext4. Btrfs is mandatory for virtual machine. Question 4. AFAIK transcoding is available on DS918 only, which is a great platform, you can have as many disk as you like (almost, max is 24, i think) One important aspect is hdd/ssd hibernation, so that drives wont spin/work all the time, check scemd log for errors.