Search the Community

Last test : edit directly to grub, press "e" on start. After edit, press F10 "SataPortMap" : "3" "DiskIdxMap" : "00" "sata_remap" : "4\\>0:5\\>1:6\\>2"

Edit your user_config.json "SataPortMap" : "4", "DiskIdxMap" : "00", "sata_remap" : "4\\>0:5\\>1:6\\>2:7\\>3" }, WARNING : If the last argument is not sata_remap add a "," After, compil your loader and test ! @IG-88 Can you watch this please?

Thanks for your reply! Sadly with SataPortMap=4 i get the same error.. I also tryed the linked Tutorial but with that i no longer find my NAS after building the bootloader. Used Plattform: DS3622xs+ used architecture:broadwellnk.

Hi, Your chipset on your motherboard is an INTEL B660, It manages 4 sata ports (present on the motherboard). Why map your USB port? Your usb stick is recognized by the VID and PID that you enter in user_config.json (./rploader.sh identifyusb) Test : SataPortMap=4 DiskIdxMap=00 For any help, read :

Most of the ESXi XPe tutorials suggest that the user installs a virtual disk as an example device, separate from the loader vmdk. Maybe you want to use a virtual disk in your installation, and maybe you would rather use a passthrough controller. It is not always clear and often people install the virtual disk when it isn't necessary. Because we map the loader vmdk away (with SataPortMap=10 and DiskIdxMap=1) that causes the vmdk to be assigned outside of the addressable port range (assuming 16 ports). Any SATA devices on that same controller (SATA0) would be similarly not addressable, so we ask the user to add a second SATA controller (SATA1) for the virtual disks (or RDM devices) to be attached to. Those are then addressed at the beginning of the port range (SataPortMap=1000 and DiskIdxMap=1n, where n is the number of virtual disks). In @aerolite's case, they did not need a "21GB" virtual disk because data drives were being delivered via LSI HBA but it appears they had created one and set up the virtual controller as above. Non-SATA ports tack onto the end of whatever SATA ports are reserved by SataPortMap/DiskIdxMap. So they were asking how to get the starting port for the HBA back to the beginning of the range. Therefore, since they do not need the 21GB disk it can be deleted, the SATA1 controller also deleted, and SataPortMap and DiskIdxMap adjusted. With no SATA devices in the system (aside from the loader vmdk) then SataPortMap=1000 and DiskIdxMap=1. Unusually, the last SataPortMap 00 is required so that the HBA knows where to start addressing its ports. Unfortunately, there is an anomaly exhibited with TCRP/DSM7/HBA's that causes a single port gap between the last SATA disk and the first HBA disk. I haven't figured out how to make that go away outside of a device tree configuration.

Info pour l'update du N54L avec 6 Disques Dur selon cette procédure faite à l'époque (2019) et en réactivant la NIC Interne tout en laissant la carte HP NC360T Téléchargement du tinycore-redpill.v0.8.0.0.img.gz sur le GitHub: https://github.com/pocopico/tinycore-redpill Flash de la Micro carte (j'utilise un porte carte micro-Sd) avec balena Etcher simple et efficace. Mise en place de la clé USB à l'intérieur du Serveur N54L Démarrage puis paramètrage du BIOS pour remettre en service le NIC interne Redémarrage sur le serveur et boot sur la clé USB toute fraiche Lancement du Tiny et commande pour récupérer l'adresse IP affectée au serveur ifconfig Depuis un pc sur le même réseau : commandes avec Terminal (ou autre soft sous windaube) ssh tc@votre ip local (ex:ssh tc@192.168.1.9) Mot de passe : P@ssw0rd update the TCRP script ./rploader.sh update update the TCRP support file ./rploader.sh fullupgrade Identification auto du PID/VID de la clé USB ./rploader.sh identifyusb création d'un Serial number/MAC (j'en profite pour passer upgrader du DSM3615xs au DS3622xs+ deux possibilités : random MAC address ./rploader.sh serialgen DS3622xs+ real MAC address ./rploader.sh serialgen DS3622xs+ realmac mapping auto de ma grappe HDD ./rploader.sh satamap pour mon cas (6HDD) Recommended settings: SataPortMap=6 DiskIdxMap=00 Pour ajouter une extension spécifique : pour ma part je vais tester l'extension "Power button package"' qui me permettait de mettre en veille le serveur avec le bouton "Power" en facette du serveur. Cette extension devait être installer manuellement depuis le serveur sous DSM6 (cf. tuto) ./rploader.sh ext <architecture>-<version>-<DSMreleasenumber> <extensionurl> ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-acpid/rpext-index.json une fois tout cela fait, ouverture de user_config.json (ici avec VI) vi user_config.json Vérification de tous les paramètres et ajouts d'autres adresse MAC une fois modifié: escape puis :X pour sauvegarder et sortir de VI Compile ensuite avec le bon .pat Synology DSM. Commande DS3615XS 7.0.1 ./rploader.sh build bromolow-7.0.1-42218 DS3615XS 7.1 ./rploader.sh build bromolow-7.1.0-42661 DS3622XS+ 7.0.1 ./rploader.sh build broadwellnk-7.0.1-42218 DS3622XS+ 7.1 ./rploader.sh build broadwellnk-7.1.0-42661 Une fois fait, reboot du serveur sudo reboot Paramétrage de mon DSM Première réglage: la récupération du gestionnaire d'alimentation créé par Renaud Métrich. Ce dernier me permet de mettre en veille le serveur selon plusieurs possibilités bien expliqués dans l'extension depuis DSM Téléchargement du spk ici. Puis installation Manuelle obligatoire depuis DSM (Attention de décocher lancer après installation car une commande SSH est obligatoire avant lancement du soft pour l'autoriser a utiliser les droits root La commande SSH: sudo cp /var/packages/AdvancedPowerManagerDSM7/conf/privilege.root /var/packages/AdvancedPowerManagerDSM7/conf/privilege

I can finally report that I fixed it. What I did to resolve my issue tried to determine if it is a hardware/software failure connected 8 disks to 1 HBA (HBA2 was not installed at that time) and checked if every disk was listed (computer management in windows server 2016, another OS would probably work as well) unplugged HBA1 and connected HBA2 -> also checked if 8 disks were listed -> one disk was missing, so I checked all connectors and one was loose. flashed firmware of my second HBA. connected both HBAs, installed 22 disks and all were listed in WIN server 2016 unplugged my X540-T2 10Gbit NIC installed Xpenology as follows ran command by command ./rploader.sh clean ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DS3622xs+ vi user_config.json adapted my user_config.json to my environment { "extra_cmdline": { "pid": "0x1000", "vid": "0x090c", "sn": "xxxxxxxxxxxxx", "mac1": "xxxxxxxxxxxxx", "mac2": "xxxxxxxxxxxxx", "mac3": "xxxxxxxxxxxxx", "SataPortMap": "", "DiskIdxMap": "" }, "synoinfo": { "esataportcfg" : "0x00", "usbportcfg" : "0xc00000", "internalportcfg" : "0x3fffff", "maxdisks": "22", "support_bde_internal_10g": "no", "support_disk_compatibility": "no", "support_memory_compatibility": "no" }, "ramdisk_copy": {} ran these commands to finish the tcrp loader ./rploader.sh build broadwellnk-7.1.0-42661 ./rploader.sh backup ./rploader.sh backuploader exitcheck.sh reboot plugged my x540 in connected my LAN cable to one of the LAN ports booted from USB and installed the appropriate DSM_DS3622xs+_42661.pat Special thanks to @Peter Suh @IG-88 @flyride for your support.

I have been running a Volume1 SHR-2 (with 2 disks protection) under DSM 6.x on proxmox for years without too many problem... For the last few months I was not more able to update to DSM 6.X updates, the pat file was retunring as corrupted each time I was trying (I did not investigate furthermore...) More recently 2 out of my 8 disks started to show bad health, but I had no time to deal with that. Then one day, after a reboot, my DSM 6.2.??? showed up with 'Configuration lost' ! Rather than trying to repair this old version, I took advantage to migrate to 7.1 with TCRP TCRP did not recognized my 2nd passthrouh SATA controller so I rearranged the disks in order to use only one controller card, the 4 others disks being held by the onboard controller (4 passtrough motherboard disks + 1 passtrough 4 slots Marvell SATA controller with 4 disks). One out of my two 4Tb WD red HDD was having massives I/O errors I have sent it back under warranty). After different tried, I had to change to DS3622xs+ to make it run. I configured user_config.json with SataPortMap=44 and DiskIdxMap=0004 This is what I get with : Proxmox disks (those are those of the controller card, the 4 others are not seen because in passthrough under the running Xpenology VM) : VM configuration : All the disks are recognized (except the one gone under warranty) and I thought naively that thanks to SHR-2 DSM will be able to rearrange the Volume. I am really not an IT expert, specially when it comes about partitionning, LVM, disk management ... My wife has many sensible datas on that volume and I have been very busy these last few months so I haven't been very serious about backups (I know !... ) She will probably ask divorce if I do not manage to recover thoses files 🤔! Any help in order to recover my data (and my mariage 😀) would be much much appreciated. Thanks in advance.

SataPortMap has no effect on platforms that use DTS. If you use JUNs mode, then the disks should be added automatically. If you want to manually edit the DTS file then you can use the redpill-dtb-static. Maybe you also want to try the ARPL it DVA1622 builds and run OK on my test system The 16Port DTS file for manuall edit can be found here -> https://github.com/pocopico/tinycore-redpill/raw/develop/dva1622-16port.dts

Background: Fresh installation, loader is 1.02b Chips for 2 port extender ASM1061. Chips for 4 port extender Marvell 9215 When you use PCIE (or Mini-PCIE) sata extender , the HDD slot may not be follow the sequence For example. It gives HDD#1,2,5,6 instead of HDD#1,2,3,4 I did some reading in below links https://github.com/evolver56k/xpenology/blob/master/synoconfigs/Kconfig.devices It shows there are three command may help to re-arrange the HDD slot in order. SataPortMap is define number of sata ports each of the sata host controller has DiskIdxMap defines first sata port number for each of the sata host controller sata_remap can help re-arrange SATAslot sequence ( not sure can re-arrange across different host or not) I have tried play around with above three command with different setting. But didn't work out. Because there isn't any successful examples that I have find. Can any one share their successful examples I have 3 scenario need to solve. Scenario#1 Motherboard has 2 sata port #1 and #2 . PCIE extender 2 sata ports DSM shows HDD #1,2,5,6 (skipped 3,4) How to configure so that it shows HDD#1,2,3,4 Scenario#2 Motherboard has 4 sata #1-#4 . PCIE extender 4 sata ports DSM shows HDD #1,3,5,6 (skipped 2,4). for 4 ports from motherboard, and HDD#7,8,9,10 for 4 ports from PCIE extender I suspected this MotherBoard has 3 sata controller on it. I tried to config SataPortMap = 1124, but it didnt worked out How to configure so that it shows HDD#1,2,3,4 (MB),5,6,7,8 (PCIE) Scenario#3 Motherboard has 4 sata #1-#4 . PCIE extender 2 sata ports When no PCIE extender connected. DSM shows HDD#1,2,3,4 (from MB) Once PCIE extender is connected. DSM shows HDD#1,2 (from MB), 3,4(from extender), 5,6 (from MB) It's like sata extender pushing port #3,4 to position of port #5,6 I suspected somehow the extender sata host has higher priority than the 2nd host on motherboard How to configure so that it shows HDD#1,2,3,4 (From MB) ,5,6 (from extender) ? Thanks a lot for reading and helping.

DS3622xs+ Motherboard: Supermicro X11SRM-VF CPU: 8core/8thread RAM: 128GB ECC HBA: LSI SAS3224 Network: connectx-3 I also tried ESXI with this guide VM boots and can install DSM with one virtual disk, but as soon as I add either one of the PCIE passthrough device (SAS3224 or connectx-3), it automatically shutdown. I see that during builds the ./rploader found driver for both devices. Here is my config: { "extra_cmdline": { "pid": "removed", "vid": "removed", "sn": "removed", "netif_num": "2", "mac1": "removed", "mac2": "removed", "SataPortMap": "11", "DiskIdxMap": "1000" }, "synoinfo": { "internalportcfg": "0xffff", "maxdisks": "16", "support_bde_internal_10g": "no", "support_disk_compatibility": "no", "support_memory_compatibility": "no" }, "ramdisk_copy": {} }

Wrong SataPortMap will not cause KP. Can you capture the KP ? The most common issue would be the cpu emulation. Q35 was/is the right one.

Need some help before I give up trying this and move to TrueNAS or OpenmediaVault (both install seamlessly). I have made countless attempts and installing this on my Ryzen PC but have not been able to get it to work. I am sure there are issues with detecting my disks but can't be sure. I have attempted almost all of the sataportmap/ diskidxmap systems but have never got it to work. My current configuration is a DS918+ DSM 7.0.1-42218. satamap shows Bad Ports: -5 -4 -1 0. Don't understand this. Anyway I updated the values that came up to the user_config.json file and continued the build. tc@box:~$ sudo ./rploader.sh satamap now Found "01:00.1 Advanced Micro Devices, Inc. [AMD] Device 43b7 (rev 02)" Detected 8 ports/4 drives. Bad ports: -5 -4 -1 0. Override # of ports or ENTER to accept <8> Found "0a:00.2 Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)" Detected 4 ports/1 drives. Bad ports: 1 2. Override # of ports or ENTER to accept <4> Computed settings: SataPortMap=84 DiskIdxMap=0008 WARNING: Bad ports are mapped. The DSM installation will fail! Should i update the user_config.json with these values ? [Yy/Nn] y Done. I am pretty sure this will fail. Rebooted the PC and as expected came up with bad disks. Any help appreciated. I am attaching the output of the dmesg and the lspci -tvnnq outputs and the build dialogue. Motherboard ASUS Prime B350M-A. CPU Ryzen 5 1600 Memory 16 GB Motherboard has 6 SATA ports. All have been set to "Hot Plug" Enabled. SATA mode is set to AHCI. M2_SATA Port is empty. Thanks in advance to who ever can help. Also would like to acknowledge the efforts of @pocopicoand @Peter and many others that have been involved in this project. device.txt disk.txt DS918-build pci.txt

I tried some times build, but fail in migrate or reinstalling at 55% Edit: got some errors: @Peter Suh ./myv.sh DS3622xs+J noconfig manual Rploader Version : 0.8.0.3 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : jun Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : redpill-dtb-static redpill-misc Extensions URL : "https://github.com/PeterSuh-Q3/rp-ext/raw/main/redpill-dtb-static/rpext-index.json", "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds3622xsp_42218 MODEL : DS3622xs+ Local Cache Folder : /mnt/sdf3/auxfiles DATE Internet : 03072022 Local : 03072022 Checking Internet Access -> OK Cloning into 'redpill-lkm'... remote: Enumerating objects: 1257, done. remote: Counting objects: 100% (329/329), done. remote: Compressing objects: 100% (44/44), done. remote: Total 1257 (delta 306), reused 290 (delta 284), pack-reused 928 Receiving objects: 100% (1257/1257), 470.09 KiB | 1.11 MiB/s, done. Resolving deltas: 100% (869/869), done. Cloning into 'redpill-load'... remote: Enumerating objects: 2042, done. remote: Counting objects: 100% (14/14), done. remote: Compressing objects: 100% (9/9), done. remote: Total 2042 (delta 3), reused 12 (delta 3), pack-reused 2028 Receiving objects: 100% (2042/2042), 114.71 MiB | 5.21 MiB/s, done. Resolving deltas: 100% (958/958), done. [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.r8125 ========================================== [#] Extension name: r8125 [#] Description: Adds Realtek RTL8125 2.5Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8125 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Rploader Version : 0.8.0.3 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : jun Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : redpill-dtb-static redpill-misc Extensions URL : "https://github.com/PeterSuh-Q3/rp-ext/raw/main/redpill-dtb-static/rpext-index.json", "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds3622xsp_42218 MODEL : DS3622xs+ Local Cache Folder : /mnt/sdf3/auxfiles DATE Internet : 03072022 Local : 03072022 Checking Internet Access -> OK Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.r8168 ========================================== [#] Extension name: r8168 [#] Description: Adds RealTek RTL-8168 Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8168 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42218 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Do you want add driver? Y/N : n Call my.sh now... Checking Internet Access -> OK Checking if a newer mshell version exists on the repo -> Version is current MODEL is DS3622xs+ tcrppart is sdf3 TARGET_PLATFORM is broadwellnk SYNOMODEL is ds3622xsp_42218 This is the jumkey's jun mode of TCRP. jun mode skips fullupgrade. If fullupgrade is required, please handle it separately. ########################################################################################################################################### 100.0% ########################################################################################################################################### 100.0% ########################################################################################################################################### 100.0% ########################################################################################################################################### 100.0% this model skip fullupgrade for custom adjustment SN Gen/Mac Gen/Vid/Pid/SataPortMap detection skipped!! DSM PAT file pre-downloading in progress... https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 345M 100 345M 0 0 13.1M 0 0:00:26 0:00:26 --:--:-- 14.6M Pat file sha256sum is : f38329b8cdc5824a8f01fb1e377d3b1b6bd23da365142a01e2158beff5b8a424 verifyid sha256sum is : f38329b8cdc5824a8f01fb1e377d3b1b6bd23da365142a01e2158beff5b8a424 pat file sha256sum is OK ! Loader Building in progress... Loader Manual Building in progress... Rploader Version : 0.8.0.3 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : jun Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : redpill-dtb-static redpill-misc Extensions URL : "https://github.com/PeterSuh-Q3/rp-ext/raw/main/redpill-dtb-static/rpext-index.json", "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds3622xsp_42218 MODEL : DS3622xs+ Local Cache Folder : /mnt/sdf3/auxfiles DATE Internet : 03072022 Local : 03072022 Checking Internet Access -> OK Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. No extra build option or static specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds3622xsp_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwellnk.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/src/check-redpill.sh Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found SATA Controller : pciid 8086d00008c02 Required Extension : ahci Searching for matching extension for ahci Found Ethernet Interface : pciid 10ecd00008125 Required Extension : No matching extension Found Ethernet Interface : pciid 10ecd00008125 Required Extension : No matching extension Found Ethernet Interface : pciid 10ecd00008125 Required Extension : No matching extension Found Ethernet Interface : pciid 10ecd00008125 Required Extension : No matching extension Found VGA Controller : pciid 10ded00000a65 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.r8169 ========================================== [#] Extension name: r8169 [#] Description: Adds RealTek RTL-8169 Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8169 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42218 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Found Ethernet Interface : pciid 10ecd00008168 Required Extension : r8169 Searching for matching extension for r8169 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json" Found SATA Controller : pciid 1b21d00001064 Required Extension : No matching extension ------------------------------------------------------------------------------------------------ Starting loader creation Found tinycore cache folder, linking to home/tc/custom-module Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK Processing add_extensions entries found on custom_config.json file : redpill-dtb-static redpill-misc Adding extension "https://github.com/PeterSuh-Q3/rp-ext/raw/main/redpill-dtb-static/rpext-index.json", [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/PeterSuh-Q3/rp-ext/raw/main/redpill-dtb-static/rpext-index.json... [#] Downloading remote file https://github.com/PeterSuh-Q3/rp-ext/raw/main/redpill-dtb-static/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ########################################################################################################################################### 100.0% [OK] [#] ========================================== redpill-dtb-static ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/redpill-dtb-static/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_42661 ds1621p_42661 ds2422p_42661 ds2422p_42218 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42661 ds1621p_42621 [#] ======================================================================================= Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ########################################################################################################################################### 100.0% [OK] [#] ========================================== redpill-misc ========================================== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc [#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc [#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc [#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Updating extension : redpill-dtb-static contents for model : ds3622xsp_42218 [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_42218 platforms extensions... [-] The extension redpill-dtb-static was found. However, the extension index has no recipe for ds3622xsp_42218 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== redpill-dtb-static ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/redpill-dtb-static/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_42661 ds1621p_42661 ds2422p_42661 ds2422p_42218 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42661 ds1621p_42621 [#] ======================================================================================= [-] Failed to update recipe for redpill-dtb-static extension for platform ds3622xsp_42218. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== redpill-dtb-static ========================================== [#] Extension name: Device tree binary [#] Description: Create your own device tree binary [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/redpill-dtb-static/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_42661 ds1621p_42661 ds2422p_42661 ds2422p_42218 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42661 ds1621p_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** Updating extension : redpill-misc contents for model : ds3622xsp_42218 [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_42218 platforms extensions... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ########################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension redpill-misc platform ds3622xsp_42218 [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/install.sh ########################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/install.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/install-all.sh ########################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/install-all.sh file... [OK] [#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/ttyd ########################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/ttyd file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/install_rd.sh ########################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/install_rd.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/lrzsz.tar.gz ########################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/lrzsz.tar.gz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/... [OK] [#] Successfully processed recipe for extension redpill-misc platform ds3622xsp_42218 [#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42218/... [OK] Protocol spec without prior Class and Subclass spec at line 23281 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 5598 100 5598 0 0 96517 0 --:--:-- --:--:-- --:--:-- 96517 Downloading dtc binary ########################################################################################################################################### 100.0% No cached dtb file found in /home/tc/custom-module/ds3622xsp.dtb Found 5 disks and 0 nvme Collecting disk paths Found local disk sda with path 00:1f.2, adding into internal_slot 1 with portnumber 2 Found local disk sdb with path 00:1f.2, adding into internal_slot 2 with portnumber 3 Found local disk sdc with path 00:1f.2, adding into internal_slot 3 with portnumber 4 Found local disk sdd with path 00:14.0, adding into internal_slot 4 with portnumber 30 Found local disk sde with path 00:14.0, adding into internal_slot 5 with portnumber 31 NO NVME disks found, returning Patching USB to include your loader. Loader found in 3-3 port Converting dts file : ds3622xsp.dts to dtb file : >ds3622xsp.dtb dtb extension is not loaded and its required for DSM to find disks on ds3622xsp_42218 Copy of the DTB file ds3622xsp.dtb to was not succesfull. Please remember to replace the dtb extension model file ... execute manually : cp ds3622xsp.dtb and re-run Backup in progress... Clearing local redpill files Please make sure you are using the latest 1GB img before using backup option Current /home/tc size is 2.4M , try to keep it less than 1GB as it might not fit into your image Should i update the sdf with your current files [Yy/Nn] Backing up home files to sdf : Backing up files to /mnt/sdf3//mydata.tgz Done. root@box:/home/tc# that driver r8169 is downloading wrong.. because my drivers lan are r8168 and r8125 hmmm.. why is downloading it?

Nope, it's not like that. Drive 8 and Drive 10 are sata #2 and sata #4. My best guess is that sata #1 and sata #3 (Drive 7 and Drive 9) are not recognized. Here's a screenshot with 4 disks connected Perhaps my sata port config is wrong? SataPortMap=64 DiskIdxMap=0006 Any idea?

Hey everyone! I actually got my Xpenology fully booted thanks to this virtualization guide and this general install guide, but neither provided me enough details to get my raid card active. To begin, here are my specs: VM or BareMetal : VM - ESXi 6.7U3 Hardware (Motherboard/CPU) : Gigabyte M370M DS3H / Intel 8400 Storage-Controller: 1x LSI SAS 9211-8i (HBA in IT mode) Hot Plug/Hot Swap Applied : Yes version of rploader.sh : 0.8.0.3 Platform (DS3622xsp/DS918+/DS920+/DVA3221/DS1621+/DS3615xs/DS3617xs) : 3622xs+ Platform Version (6.2.4/7.0.1/7.1) : 7.1 Platform Revision (42218/42661/42661-U1) : 42661 Current Status : Boots to kernel, but with virtualized disk. As the virtualized guide suggested, I have two SATA Controllers, one with TCRP and the other is just a virtual disk. I also have my LSI 9211-8i in there in IT Mode. lspci -kkq reveals: 0b:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Fujitsu Technology Solutions HBA Ctrl SAS 6G 0/1 [D2607] So its registered by the machine, I just need it initialized by Synology. I read about drivers in the guide linked above, so I ran the following commands: ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-e xt/master/mpt2sas/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-e xt/master/mpt3sas/rpext-index.json I didn't know which had the driver I needed, and frankly I didn't see any negatives by doing both, so I did both. Now I get this, basically saying it sees the controller, but that is has zero drives. It is also saying that a single SCSI/HBA has 63 drives. I have one drive connected to the SAS: root@box:/home/tc# ./rploader.sh satamap now Machine is VIRTUAL Hypervisor=VMware Found SCSI HBAs, We need to install the SCSI modules Don't run this as root. Found "02:03.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found "02:04.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Defaulting 8 virtual ports for typical system compatibility Override # of ports or ENTER to accept <8> ds Non-numeric, overridden to 0 Found SCSI/HBA "0b:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid bus number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (63 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) Found SCSI/HBA "03:00.0 VMware PVSCSI SCSI Controller (rev 02)" (0 drives) Computed settings: SataPortMap=10 DiskIdxMap=1000 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file I seemingly have all the pieces here, just need some help putting it altogether. I plan on connecting eight drives absolute max, and have four drives in the short term. For testing, there is currently one drive plugged into my LSI card with a SAS cable. I would really appreciate some guidance.

I tested with VMWare and no works, with data vmdk SataPortMap=11 DiskIdxMap=1000 and without data vmdk SataPortMap=1 DiskIdxMap=1000. I will continue to try other options. Thanks.

Data VMDK needs to be on SATA1:0. Add another virtual SATA controller. Data VMDK is not strictly necessary since you have LSI disks. Without data VMDK and no secondary SATA controller, SataPortMap=1 DiskIdxMap=1000 With data VMDK and a secondary SATA controller, SataPortMap=11 DiskIdxMap=1000

I don´t understant what do you want to tell me. Loader image vmdk is sata 0:0 Data vmdk is is sata 0:1 I change grub.cfg with SataPortMap=1 and DiskIdxMap=1000 and no works.

I forgot to mention that your option to use the ds3622 gave an error: tc@box:~$ sudo ./rploader.sh serialgen DS3622xs now Error : DS3622xs is not an available model for serial number generation. Available Models : DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621+ tc@box:~$ sudo ./rploader.sh serialgen DS3622xs+ now Serial Number for Model : 20C0SQRZFTQQL Mac Address for Model DS3622xs+ : 00:11:32:87:31:D1 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ sudo ./rploader.sh satamap now Found "00:1f.2 Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)" Detected 6 ports/3 drives. Override # of ports or ENTER to accept <6> Computing settings: SataPortMap=6 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] y done. Rest of the outpot on terminal: tc@box:~$ sudo ./rploader.sh identifyusb now Found Lexar JumpDrive SerialNumber: 3189564879 Vendor ID : 0x05dc Product ID : 0xa205 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ tc@box:~$ sudo ./rploader.sh build bromolow-7.0.1-42218 Rploader Version : 0.8.0.3 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : bromolow TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 3 MODULE_ALIAS_FILE : modules.alias.3.json SYNOMODEL : ds3615xs_42218 MODEL : DS3615xs Local Cache Folder : /mnt/sdd3/auxfiles DATE Internet : 01072022 Local : 01072022 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current Cloning into 'redpill-lkm'... remote: Enumerating objects: 1257, done. remote: Counting objects: 100% (329/329), done. remote: Compressing objects: 100% (44/44), done. remote: Total 1257 (delta 306), reused 290 (delta 284), pack-reused 928 Receiving objects: 100% (1257/1257), 470.09 KiB | 388.00 KiB/s, done. Resolving deltas: 100% (869/869), done. Cloning into 'redpill-load'... remote: Enumerating objects: 2042, done. remote: Counting objects: 100% (14/14), done. remote: Compressing objects: 100% (9/9), done. remote: Total 2042 (delta 3), reused 12 (delta 3), pack-reused 2028 Receiving objects: 100% (2042/2042), 114.71 MiB | 5.92 MiB/s, done. Resolving deltas: 100% (958/958), done. No extra build option or static specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds3615xs_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-3.10.108.tgz Extracting module Got redpill-linux-v3.10.108.ko Testing modules.alias.3.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.e1000e ========================================== [#] Extension name: e1000e [#] Description: Adds Intel(R) PRO/1000 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/e1000e [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42218 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d00001502 Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found SATA Controller : pciid 8086d00001c02 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.e1000e/pocopico.e1000e.json). For more info use "ext-manager.sh info pocopico.e1000e" *** Process will exit *** Found Ethernet Interface : pciid 8086d000010d3 Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found VGA Controller : pciid 102bd00000532 Required Extension : No matching extension ------------------------------------------------------------------------------------------------ Starting loader creation Found tinycore cache folder, linking to home/tc/custom-module Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y cp: cannot stat '/home/tc/custom-module/*42218*.pat': No such file or directory Processing add_extensions entries found on custom_config.json file : [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== redpill-boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating pocopico.e1000e extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension pocopico.e1000e index is already up to date [#] Updating redpill-boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension redpill-boot-wait index is already up to date [#] Updating redpill-boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3615xs_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3615xs_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.e1000e platform ds3615xs_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/e1000e-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/e1000e-3.10.108.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/e1000e-3.10.108.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/e1000e-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/src/check-e1000e.sh to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/check-e1000e.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/check-e1000e.sh file... [OK] [#] Successfully processed recipe for extension pocopico.e1000e platform ds3615xs_42218 [#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds3615xs_42218 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3615xs_42218/boot-wait.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3615xs_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension redpill-boot-wait platform ds3615xs_42218 [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3615xs_42218/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds3615xs_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3615xs_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 339M 100 339M 0 0 5946k 0 0:00:58 0:00:58 --:--:-- 6162k [#] Verifying /home/tc/redpill-load/cache/ds3615xs_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds3615xs_42218.pat file to /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/zImage to /home/tc/redpill-load/build/1656681669/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1656681669/rd-ds3615xs_42218-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1656681669/rd-ds3615xs_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1656681669/rd-patched-ds3615xs_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3615xs_42218 platform extensions to /home/tc/redpill-load/build/1656681669/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1656681669/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sdd1 to localdiskp1 /dev/sdd2 localdiskp2 Creating tinycore entry menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS3615xs v7.0.1-42218 (USB, Verbose)' { menuentry 'RedPill DS3615xs v7.0.1-42218 (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { Caching files for future use Found /home/tc/redpill-load/cache/ds3615xs_42218.pat, copying to cache directory : /mnt/sdd3/auxfiles Saving user session for future use. Saving current extensions -> OK ! Saving current user_config.json -> OK ! tc@box:~$ client_loop: send disconnect: Broken pipe Mac-mini-van-Bob:~ bobwalberg$

DVA1622 does not use SataPortMap but DTS as does 920+ and ds1621+. If the automatic patching is not working for you, you can always use the manual edit process and place the file under /home/tc/custom-module prior building the loader. The process is explained a few posts back

@IG-88 Tried the settings: "SataPortMap" : "6", "DiskIdxMap" : "00", "sata_remap" : "10\\>2:11\\>3" Now shows drive errors on disks 3, 4, 7, 8 Will try with the DiskSeqReverse parameter.

Looking at this happening at another instance, try SataPortMap=1 and DiskIdxMap=1000

well its also possible to revert the order of a controller, 7,8 is on the 2rd controller 1st and 2nd port as dummy found, if we revers the order of the 2nd controller the two usable ports will be 1st and 2nd port on that controller ... "SataPortMap": "22", "DiskIdxMap": "0006", "DiskSeqReverse": "04" },

maybe one last try? user-config-json.txt ... "SataPortMap": "6", "DiskIdxMap": "00", "sata_remap": "10\\>2:11\\>3" }, in theory it should map the two ports ata11/ata12 into the 1st dummy gap (ata3/ata4), close the gap and leave only 6 ports usable