bonestaak

Find MAC in another menu (sysinfo) of Synology

Is there a simple way to just find out the Mac address on the motherboard of my expenology from my work computer? I don't see it when booting the motherboard.

Hmm, i just have 1 Nic, but should i insert my nics mac adres? or just all the 3 rows from you here above? and how about netif_num?

And also Virtual Machine Manager does not work, When making Cluster... Plof program ended and you can not see logbook as the program must first ended making cluster

DS920+

And now i changed the two hd and the ssd from controller, now after init i got 2 reds pro available, So i think i have now the drives on the Intel Corporation .. controller and now the SSD should on the ASMedia, i think there must be a driver (if there is) for the ASM1062 As i want to use beside Plex also Home Assistant i want to use de SSD for Docker (as i think the Home Assistant does communicate a lot with the drives). But the new situation is already better than the old. For this moment i just have not made a pool.

I did cmdline menu show SATA see printscreen but then what? new driver? i see there are 2 controllers, i have attached 2 drives to 1 and 1 (ssd) to the other. But after restart there is only 1 drive available. How to make a drive map?

As there is nowhere an answer how to download the r8169 i deleted it. Again built. Then patch or pattern does not match. Change Pat version. Then start again, Very strange when the Syno is started up! i got the Synology from the old (yesterday) install, so with user and password to fill in. How is that possible, that is not overwrite or erased? So no new format. And of course i have attached 3 drive It is seen in de bios when startup and del, but also with this bootloader, only 1 drive is available, so my new Synology is just a "DS120+" No backup, no raid1 so when i put up the music files and movies for Plex i must also copy these files directly to a connected dock with a second drive (if it is still possible on dsm7 to connect an USB drive). I have worked with a Truenas system but too bad it dit not support Home Assistant "Supervised" only Core, and in Core you cannot add zwave or zigbee sticks so beside the Truenas with consume about 60 watts and an other pc to hold Home Assistant with an extra 20 watts. I used for this experiment an motherboard from ASRock with a J5005 and that used about 10 watts! I have used this Motherboard before i dit go to Truenas with DSM 6.2 and it dit work with the 3 drives and a docker (for HomeAssistant). But i tried it with the bootloader for 6.2 and it went wrong with the install of the diskmanager, about 15 procent ending. I think when we should use motherboards with this low power like also more expensive C3958 intel with ECC support (thats why i went to Truenas with a Xeon processor and ECC memory) I think they wil not work with Expenology. It wil only work with Common motherboards (high power) that were shipped with low cost PC's So now i must wait for a long time before i can use music and video again as the better real Syno's who works with ECC and of course Docker are very expensive. Too bad there is no good documentation for Expenology.

addon r8169 not found. Tried to download (option) but then file format not recqognised. I have 3 drives 2 same red pros and 1 ssd But when using Redpill i got working Syno but with just only 1 drive. How to setup for 3 drives?

Which file to download? there is no img, only arpl-main.zip and that seemes to be not bootable (motherboard always came back to bios setup)

But when choosing 3622 The system said: there is no key, choose from another. Anyway, i heard from another that he has the same problem, the system is loading the wrong pattern. I dit have another motherboard so i threw away the old expensive board with the ECC memory. Now i use the ASRock motherboard with J5005 processor (looks a lot like the J41.. on the ds920+ but a little faster. Installing in just about 10 minutes Now i got the system and the desktop, but 1 problem: i got 3 drives (2 Red plus for raid 1 and one SSD for Docker. But too bad (althoug the motherboard gives all 3 Syno just find only 1 drive.

I forgot to mention that your option to use the ds3622 gave an error: tc@box:~$ sudo ./rploader.sh serialgen DS3622xs now Error : DS3622xs is not an available model for serial number generation. Available Models : DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621+ tc@box:~$ sudo ./rploader.sh serialgen DS3622xs+ now Serial Number for Model : 20C0SQRZFTQQL Mac Address for Model DS3622xs+ : 00:11:32:87:31:D1 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ sudo ./rploader.sh satamap now Found "00:1f.2 Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)" Detected 6 ports/3 drives. Override # of ports or ENTER to accept <6> Computing settings: SataPortMap=6 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] y done. Rest of the outpot on terminal: tc@box:~$ sudo ./rploader.sh identifyusb now Found Lexar JumpDrive SerialNumber: 3189564879 Vendor ID : 0x05dc Product ID : 0xa205 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ tc@box:~$ sudo ./rploader.sh build bromolow-7.0.1-42218 Rploader Version : 0.8.0.3 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : bromolow TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 3 MODULE_ALIAS_FILE : modules.alias.3.json SYNOMODEL : ds3615xs_42218 MODEL : DS3615xs Local Cache Folder : /mnt/sdd3/auxfiles DATE Internet : 01072022 Local : 01072022 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current Cloning into 'redpill-lkm'... remote: Enumerating objects: 1257, done. remote: Counting objects: 100% (329/329), done. remote: Compressing objects: 100% (44/44), done. remote: Total 1257 (delta 306), reused 290 (delta 284), pack-reused 928 Receiving objects: 100% (1257/1257), 470.09 KiB | 388.00 KiB/s, done. Resolving deltas: 100% (869/869), done. Cloning into 'redpill-load'... remote: Enumerating objects: 2042, done. remote: Counting objects: 100% (14/14), done. remote: Compressing objects: 100% (9/9), done. remote: Total 2042 (delta 3), reused 12 (delta 3), pack-reused 2028 Receiving objects: 100% (2042/2042), 114.71 MiB | 5.92 MiB/s, done. Resolving deltas: 100% (958/958), done. No extra build option or static specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds3615xs_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-3.10.108.tgz Extracting module Got redpill-linux-v3.10.108.ko Testing modules.alias.3.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.e1000e ========================================== [#] Extension name: e1000e [#] Description: Adds Intel(R) PRO/1000 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/e1000e [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42218 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d00001502 Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found SATA Controller : pciid 8086d00001c02 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.e1000e/pocopico.e1000e.json). For more info use "ext-manager.sh info pocopico.e1000e" *** Process will exit *** Found Ethernet Interface : pciid 8086d000010d3 Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found VGA Controller : pciid 102bd00000532 Required Extension : No matching extension ------------------------------------------------------------------------------------------------ Starting loader creation Found tinycore cache folder, linking to home/tc/custom-module Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y cp: cannot stat '/home/tc/custom-module/*42218*.pat': No such file or directory Processing add_extensions entries found on custom_config.json file : [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== redpill-boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating pocopico.e1000e extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension pocopico.e1000e index is already up to date [#] Updating redpill-boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension redpill-boot-wait index is already up to date [#] Updating redpill-boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3615xs_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3615xs_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.e1000e platform ds3615xs_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/e1000e-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/e1000e-3.10.108.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/e1000e-3.10.108.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/e1000e-3.10.108.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/src/check-e1000e.sh to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/check-e1000e.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3615xs_42218/check-e1000e.sh file... [OK] [#] Successfully processed recipe for extension pocopico.e1000e platform ds3615xs_42218 [#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds3615xs_42218 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3615xs_42218/boot-wait.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3615xs_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension redpill-boot-wait platform ds3615xs_42218 [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3615xs_42218/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds3615xs_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3615xs_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 339M 100 339M 0 0 5946k 0 0:00:58 0:00:58 --:--:-- 6162k [#] Verifying /home/tc/redpill-load/cache/ds3615xs_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds3615xs_42218.pat file to /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/zImage to /home/tc/redpill-load/build/1656681669/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1656681669/pat-ds3615xs_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1656681669/rd-ds3615xs_42218-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1656681669/rd-ds3615xs_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1656681669/rd-patched-ds3615xs_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3615xs_42218 platform extensions to /home/tc/redpill-load/build/1656681669/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1656681669/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sdd1 to localdiskp1 /dev/sdd2 localdiskp2 Creating tinycore entry menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS3615xs v7.0.1-42218 (USB, Verbose)' { menuentry 'RedPill DS3615xs v7.0.1-42218 (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { Caching files for future use Found /home/tc/redpill-load/cache/ds3615xs_42218.pat, copying to cache directory : /mnt/sdd3/auxfiles Saving user session for future use. Saving current extensions -> OK ! Saving current user_config.json -> OK ! tc@box:~$ client_loop: send disconnect: Broken pipe Mac-mini-van-Bob:~ bobwalberg$

Now tried https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ there are more commands, and the first time it dit not asked for a .pat directly installing dsm 0-100% so restart, and again directly installing dsm whitin a few seconds, and again restart and again instarting dsm few seconds 100% then when restarting i selected the second row on the new machine boot rows and now it asked for a .pat, > also tried the upgrades but all aboud 8% 40% 56& error installing.

Hmm, i saw on the reference that Only the Haswell do hardware encoding? So i must take an installer that does not support Hardware encoding? I need the Synology for 2 things: Plex (pass) and HomeAssistant (and i think for the supervised version i must use Docker).

I have a motherboard Supermicro x9SRi-3F with a Xeon e31220, when i tried to install Tinycore redpill .. when inserting serial command there was no compatible serialloader, so i had to try another serialloader with another intel (I3) Also tried bootloaders for 6.1 and 6.2 none of them are loading, only happy hacking then nothing. Which bootloader (DSM six or seven) do work with the xeon e31220?