Search the Community

The NIC in question is a card that supports the Intel ixgbe module. Redfill loaders support this module by default. And, I have a feeling that the dgbutils addon is causing you problems all the way through. I would like to provide a way to remove this addon. Is it possible to try something like below? Of the four windows where we built the loader earlier, try the fourth window in the bottom right. vi *load/b*.json Go to the dgbutils line Delete only the relevant line with dd :wq! Save and exit Rebuild loader.

I just have a question regarding the new Intel X520-SR2 10GbE Dual Port NIC I put recently to the Server. Do you know whether drivers are available for this in the DSM image, or how to install them additionally?

Прошу помочь. Имею Thecus N5200BR PRO Выпуска 2008 года. Intel Celeron М, 1500 Mhz, Объем оперативной памяти DDR, 512 Мб, Объем флеш памяти 128 мб, WAN порт и 4 порта Ethernet 1000 Мбит./с. Возможно установить на железо с такими параметрами какую либо версию XPEnology ?

- Outcome of the update: SUCCESSFUL - DSM version prior update: -- - DSM version AFTER update: DSM 7.2.1 69057-Update 4 (clear installation) - Loader version and model: AuxXxilium arc-c-24.3.31 - Using custom extra.lzma: (Full automated Installation as SA6400 with custom Kernel) - Installation type: CPU : Intel N100 MB : Aliexpress NAS Motherboard - Additional comments: N100 iGPU perfectly detected and works

Hello, I'm successfully running xpenology on ARC Loader on SA6400 for my Intel N100 architecture. Everything is working well but : - CPU detection clock is at 2.9 instead of 3.4 Ghz - Windows Virtual Machine or Windows Docker detect a 0.8 Ghz and crash every 10 mn If someone got any solution, it would be great !

After nearly more than one year I have a problem on my DS3622x (on ESXi-7.0U3o-22348816) Today in the morning I rebooted and Redpill Friend updated to 0.0.6 and I lost three drives. I checked them in the BIOS on the LSI SAS9211-8i IT controller and all are visible. I am not quite sure what could happened. I thought maybe something crashed so I decided to update to DSM 7.2, (I was going to do it anyway ) so I did it and I used new tinycore-redpill.v0.10.0.0.vmdk file and create new bootloader I used the same MAC and SN. I have one physical drive (HDD) connected to SATA port on the motherboard and 6 SSD drives connected to above SAS controller -> pass-through. After I type ./rploader.sh satamap tc@box:~$ ./rploader.sh satamap Machine is VIRTUAL Hypervisor=VMware Found SCSI HBAs, We need to install the SCSI modules scsi-5.10.3-tinycore64 is already installed! Succesfully installed SCSI modules Found "02:00.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found "02:01.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Defaulting 8 virtual ports for typical system compat ibility Override # of ports or ENTER to accept <8> Found SCSI/HBA "03:00.0 LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)" (0 drives) Computed settings: SataPortMap=18 DiskIdxMap=1000 Should i update the user_config.json with these values ? [Yy/Nn] y Done. I created bootloader and proceed with installation and upgrade. In the new system I still cannot see these three drives: ( I attached pictures) I would like ask for the advice or help what I can do. Thanks M

User@NAS-BOX-3:/$ lspci -nn 0000:00:00.0 Class [0600]: Device [8086:0c08] (rev 06) 0000:00:01.0 Class [0604]: Device [8086:0c01] (rev 06) 0000:00:14.0 Class [0c03]: Device [8086:8c31] (rev 05) 0000:00:16.0 Class [0780]: Device [8086:8c3a] (rev 04) 0000:00:1a.0 Class [0c03]: Device [8086:8c2d] (rev 05) 0000:00:1b.0 Class [0403]: Device [8086:8c20] (rev 05) 0000:00:1c.0 Class [0604]: Device [8086:8c10] (rev d5) 0000:00:1c.2 Class [0604]: Device [8086:8c14] (rev d5) 0000:00:1c.3 Class [0604]: Device [8086:244e] (rev d5) 0000:00:1c.4 Class [0604]: Device [8086:8c18] (rev d5) 0000:00:1d.0 Class [0c03]: Device [8086:8c26] (rev 05) 0000:00:1f.0 Class [0601]: Device [8086:8c50] (rev 05) 0000:00:1f.2 Class [0106]: Device [8086:8c02] (rev 05) 0000:00:1f.3 Class [0c05]: Device [8086:8c22] (rev 05) 0000:01:00.0 Class [0104]: Device [1000:0072] (rev 02) 0000:03:00.0 Class [0200]: Device [10ec:8168] (rev 09) 0000:04:00.0 Class [0604]: Device [1b21:1080] (rev 04) 0000:05:00.0 Class [0200]: Device [10ec:8169] (rev 10) 0000:06:00.0 Class [0300]: Device [10de:0ca3] (rev a2) 0000:06:00.1 Class [0403]: Device [10de:0be4] (rev a1) 0001:09:00.0 Class [0106]: Device [1b4b:9235] (rev 11) 0001:0c:00.0 Class [0106]: Device [1b4b:9235] (rev 11)

What is this? tc@box:~$ ./rploader.sh satamap now usb Loader BUS: usb Found SCSI HBAs, We need to install the SCSI modules scsi-5.10.3-tinycore64 is already installed! Succesfully installed SCSI modules Found "00:1f.2 Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)" Detected 6 ports/5 drives. Override # of ports or ENTER to accept <6> Found SCSI/HBA "01:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 02)" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid bus number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (84 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) Computed settings: SataPortMap=6 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file tc@box:~$ exit In fact, the model is Controladora Fujitsu Lsi 9211-8i Model: D2607-a21. Is that error means that my HBA is not been recognised? 5 of 6 HDD on HBA is been shown on DSM.

Имеется: 1. оригинал/ископаемое с 4*1тб на ДСМ 4.2 2. Свежеустановленный 3617 дсм 7,2 на компе с 500+1000 хдд задача: скинуть самое важное со старого рейда на "новый" (SHR 500gb) прямо внутри хрени ОЧЕНЬ желательно не убить старый том. Мало ли что. Возможно ли это в принципе ?

Performance problems: I set up a Syno DS3622xs+ with the latest ARC loader with all options such as M.2 Cash and M2. Volume etc. The hardware I use is an ASUS board «ASUS TUF GAMING B560M-PLUS (LGA 1200, Intel B560, mATX)» and an Intel Core I7-10700k 8 Core, 64GB RAM. 2 x M2 bars. For storage, I installed 3x 18TB Seagate Raid5 as volume 1, 2 x Samsung 970pro in Raid1 mode as volume 2, and a collection of SSD as basic as volume 3. All packages and VMs are installed on Volume-2. I have major performance problems with the VMs. When using a W10, your face falls asleep, the cursor lags behind, etc.! My original DS1621 with AMD processor runs quite well. The HDs are constantly running ok, but when I log in it sometimes takes up to 10 seconds until I can log in, but not always. Does anyone have any idea why this might be

Hello everyone, After experimenting with several XPnology I managed to perform the simple installation I managed to get it working easily!! To carry out the process we will need to download the following zip and carry out the process 1. Download XPenology - Citrix 7.6.zip Site https://www.mediafire.com/file/yy61n0pvobebqlr/XPenology_-_Citrix_7.6.zip 2. Install the XEnOrchestra panel on XenServer from the following Site https://github.com/ronivay/XenOrchestraInstallerUpdater 3. We will load the virtual machine synoboot.vmdk (Do not start VM) 4. We will enter the XenOrchestra Panel and change the NIC type to Intel e1000 and change the MAC to the internal file 5. Start the virtual machine 6. Use Synology Assistant to search for the new DSM VM 7. After finding the new DSM VM, right click and connect (it would open a browser to the DSM IP) or just use the native Wizard installation 8. In the installation menu, DSM should see a virtual disk connected (usually in that step it appears that there was no disk connected) 9. Follow the wizard to install DSM, and everything should work perfectly. PD1 - When loading the vmdk we will use 2 cores and 2GB of ram I hope this helps someone. Excuse my terrible English Greetings

Операционная система DSM 7.1.1-42962 Update 4 Материнская плата: Topton NAS N6005/N5105 4x Intel i226-V 2,5G Nics Dual M.2 NVMe Six SATA3.0 2 * DDR4 HDMI2.0 Mini ITX Оперативная память: Kingston FURY Impact 32Gb (2x16Gb) 3200MHz. (Память работает в режиме 2933MHz!). (Так же пробовал 2x32Gb того же производителя с частотой 3200MHz - работать отказалась). Корпус: INNOVISION (копия Negorack NR-ITX1). Корпус из качественного толстого металла, основательный на 4 корзины + внутреннее крепление диска форм-фактора 2,5. Из минусов: шум от корпусного вентилятора и блока питания, который, к слову, заказывал вместе с корпусом, не дает покоя, но это уже вопрос дальнейшей доработки. Здесь я планирую установить что-нибудь от Noctua + плату регулировки оборотов, вот только пока не решил, либо с датчиком температуры, либо с ручным регулятором, или же вообще через 4pin разъем от CPU Fan подключить, буду рад советам. Ножки у корпуса пластмассовые, вибрация от дисков передается на стол, проблему решил приклейкой каких то 3М пятаков прорезиненных, валялись не помню откуда. В планах заказать резиновые демпфирующие ножки, а так же демпфирующие прокладки крепления дисков в корзины. Использовал загрузчик arpl-1.1-beta2a Система завелась. Тестирую и разбираюсь. Имеется статический IP, роутер Keenetic Peak, на нем пробросил порты до сервера, на компьютере Synology Drive заработал, на iPhone тоже, на телефоне так же установил DS file попробовать, тоже все без проблем. Сейчас пока система работает в тестовом режиме, пока что просто балуюсь, в дальнейшем установка 4x18Tb диска Seagate Exos X18. Есть несколько проблем, которые пока что удалось обнаружить: 1. Имеется принтер старичок HP LaserJet 1018, подключил его к серверу. Не могу заставить адекватно работать. Отправляю задание на печать, он стоит молчит, прихожу с работы - лежат отпечатанные страницы.... 2. Штатная Download Station жрет место на диске. При попытке перейти на более привычный Transmission все хорошо, но почему то падает скорость отдач, тут что то с самим Transmission, потому что при активации на Keenetic статистика отданного так же меньше чем ранее с этими же торрентами на ПК. 3. Video Station никак не хочет показывать видео. Да и вообще с телевизора LG (WebOS) не воспроизводит аудио дорожки очень большого количества фильмов, в то время как на Android приставке через VLC Player все отлично. 4. Не понимаю пока что как проверить работу транскодирования, как узнать работает оно или нет. 5. Как проверить разгон/замедление работы процессора (снижение/повышение) частоты. 6. Имеется SSD SATA Samsung 1Tb, я так понимаю кроме для виртуальных машин или файлов его больше никак не использовать? 7. Есть желание прикупить nvme накопитель, есть ли смысл приобретать Samsung 990 PRO, будет ли оправдано использование его скорости, или можно что то попроще, и на какой объем? Использовать хочу в качестве кэша.

J'ai ajouté une carte ASMedia ASM1166 avec 6 prises Sata (standard) acheté sur Amazon la carte a été reconnue sans aucun souci. ma config : - i7 4770 ASUS Z97 PRO - GTX 1650 - 10Gtek® Carte Réseau 10GbE PCIE pour Intel X540-T2 - X540 Chip, Dual RJ45 Ports - Tbest Carte Sata, Asm1166 6 Ports Loader ARC DSM 7.2 DVA3221 la migration de ma configuration est terminé. merci à tous de votre aide.

Hello. I'll start right away in order. I put it here on this guide https://github.com/fbelavenuto/arpl Specifications of my PC ( i5-12400, 16GB, Asus Prime B660M-A D4, 3xSkyhawk 4TB 1xSSD M.2 NVMe 250Gb Kingston NV1 SNVS/250G) Then when I put it using the Arpl method, the bootloader is installed on my USB flash drive, everything is fine. But at the Booting stage.... the computer is not responding. There is no access by IP. But at the boot stage, the IP is obtained via DHCP and it is visible for 3 seconds while there is still no Booting stage.... I tried this guide but all to no avail. On this guide at the stage ./rploader.sh satamap writes me 1 2 3 4 bad ports.https://xpenology.com/forum/topic/62221-tutorial-installmigrate-to-dsm-7x-with-tinycore-redpill-tcrp-loader/ , but all to no avail. On this guide at the stage ./rploader.sh satamap writes me 1 2 3 4 bad ports. Found "00:17.0 Intel Corporation Device 7ae2 (rev 11)" Detected 8 ports/3 drives. Bad ports: 1 2 3 4. Override # of ports or ENTER to accept <8> Computed settings: SataPortMap=8 DiskIdxMap=00 WARNING: Bad ports are mapped. The DSM installation will fail! And I do not know what else to do in this situation because in the Arpl method it freezes there at the loading stage. Here I can't make a flash drive because at the sata stage I have an error, if I make a build, it freezes at the flash drive build stage. Please help me, what can I do?

Hola. Haciendo una búsqueda en el foro encontré este post. Estoy configurando una red 2.5g entre Mac, switch 2.5 y Xpeno. Para el NAS tengo un par de adaptadores USB a 2.5g que podría usar. Concretamente tengo un D-Link DUB-E250 y un UGREEN 2.5G Ethernet Adapter (PN 25052). He visto que no se pueden usar nativamente en Synology este tipo de adaptadores y bicheando por internet encontré drivers para instalación manual de Realtek RTL8152/RTL8153/RTL8156 (versión Apollo Lake para un intel celeron J3455). En principio, el UGREEN es compatible. El DLink no sé el chipset que tiene. Mi pregunta es, ¿creéis que funcionarán? Además, en github comentan que tras la instalación hay que ejecutar un comando por SSH para que funcione y fuerce la instalación del driver: sudo install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su ¿Esto es seguro? Es decir, ¿rompería algo de la instalación de Xpenology mediante ARC loader? Muchas gracias de antemano.

Коллеги. tinycore-redpill v0.9.4.0 на Intel NUC DN2820FYKH. Родную Intel® Wireless-N 7260 + Bluetooth 4.0 карту система не видит. Подскажите, есть ли какая-то возможность передать в виртуальную машину PCIe WiFi/bluetooth карту? В идеале стоковую, но может быть есть какие-то "из коробки" совместимые PCIe/M.2, такое тоже бы устроило. Нужен бы и WiFi, и bluetooth. Порт USB2.0 осталься один свободный, не хотелось бы гроздья USB хабов/адаптеров развешивать. Спасибо за внимание.

Всем привет. Прошу дать рекомендации по выбору "железа" для установки DSM 920+ из двух существующих вариантов: 1 Вариант: ASUS P8H61-MX R2.0 Intel Pentium G2010 2,8GHz DDR3 Kingston HyperX Genesis KHX1333C9D3K2/4G (2Gb + 2Gb = 4Gb ) 2 Вариант: ASUSTeK P5Q-VM DO Intel Core2 Quad CPU Q9550 2,83GHz Kingston DDR2-800MHZ KVR800D2N6/2G (2Gb + 2Gb + 2Gb + 2Gb= 8Gb )

Спасибо! Будем пробовать. А сетевуху Intel ставить некуда уже. В одном слоте сетевая Mellanox - нужна для работы. Во втором - UBS-контроллер, чтобы после переезда ИБП работал

Dear Guys, I'm totally confused, but I hope, I can find help: System: Asus Q370M-C + Intel 9100, bare metal DS3622XS+ with 7.1.1-42962 The system ran over a half year. 50 days ago I had problems with booting. After little bit BIOS-Playing with UEFI and Legacy the 5th time the USB-Stick show me his boot-menu and I choose the right one. It starts and work until today. Today I must reboot my Xpenology-NAS and now, I can't boot anymore! BIOS reset etc. doesn't work (UEFI adjustment). I put the stick in another PC and after booting, the message was: error: symbol "grub_disk_native_sectors" not found Entering rescue mode... grub rescue> _ What can I do? Can I repair the stick or should I creat a new one? I want only my NAS back.... Thanks a lot! Best Regards!

Hello, I've been struggling with the memory and CPU performance of DSM on Intel systems for about a year. Someone who only runs DSM as a USB hard drive on the router will certainly not care about this topic. Maybe the reference to the anyway faulty Apollo Lake CPUs: https://www.computerbase.de/2019-09/intel-apollo-lake-lpc-degradation-defekt-stepping/ My focus is on Intel boards with Braswell to Skylake CPUs, as these are very energy-efficient and at the same time affordable for use as NAS, or are already left over as a superseded device. Now the problems that plague me: - the CPU only runs on the base clock frequency and not on boost, on systems where Intel EIST cannot be switched off in the BIOS. - Memory modules only run at 1066MHz, but they should work at 1600 or 1866MHz. Since in Linux dmidecode -t 17 is displayed incorrectly also in Windows Task Manager/Performance/Memory/far right, I decided to use the 7-zip program, which is available on all OSs. Anyone whose test is far below my "reference system" should probably consider running Xpenology on Windows in the Virtualbox. C:\Program Files\7-Zip>7z b -mmt3 -md26 7-Zip 23.01 (x64) : Copyright (c) 1999-2023 Igor Pavlov : 2023-06-20 mt3 d26 Windows 10.0 17763 x64 6.4C04 cpus:4 128TB f:110B0774C Intel(R) Pentium(R) CPU J3710 @ 1.60GHz (406C4) (40E->410) 1T CPU Freq (MHz): 2522 2576 2596 2611 2590 2596 2606 2T CPU Freq (MHz): 199% 2610 199% 2604 RAM size: 16284 MB, # CPU hardware threads: 4 RAM usage: 814 MB, # Benchmark threads: 3 Compressing | Decompressing Dict Speed Usage R/U Rating | Speed Usage R/U Rating KiB/s % MIPS MIPS | KiB/s % MIPS MIPS 22: 6797 313 2114 6613 | 134339 397 2888 11461 I look forward to your assessments. Best regards

еще раз. беру 4 харда из сино, втыкаю в комп с хренью, где shr (500+1000), что мне скажет хрень? не убьет ли она том и не вольет ли молча в свой SHR еще 4 хдд ??

Bonjour, Fraichement arrivé sur le forum avec pour éventuel projet de monter un serveur XPEnology, après avoir regardé un peu les faq, je me retrouve avec quelques questions (peut-être bêtes et je m'en excuse d'avance) : - J'ai eu a une certaine époque un DS712 avec une extension DX513. Sur un serveur DIY, comment "émule" t-on le DX513 ? Il "suffit" de mettre tous les disques dans le pc ? Le souci serait de trouver un boitier suffisamment conséquent pour pouvoir y stocker 5 à 8 disques dedans ? - J'ai cru lire qu'il était conseillé de partir plutôt sur une config à base d'intel, j'imagine qu'on peut partir du coup sur plus ou moins n'importe quel proco vu que les Syno tournaient sur des Atom et des Celeron ? - Niveau RAM, 8 Go doivent être suffisant je suppose, voire 16 GO (mais ça me semble un peu surdimensionné, je ne prévois pas de me servir de la virtualisation sous DSM) - Entre installation en "dur" (sur une machine physique dédiée) ou une virtualisation de DSM, que conseillez vous et pourquoi (par curiosité si les avis divergent) ? Merci d'avance

Sorry if this already exists. But I was trying to consolidate the information on the form into one thread to make it more helpful for other users. The Problem: After installing DSM on non-Synology hardware (Xpenology), you might notice that the fan is running at full speed and noisy. It doesn't matter what "fan speed mode" you set in "DSM > Control Panel > Hardware & Power". The reason is - DSM use a proprietary circuit on Synology hardware for fan control. On non-Synology hardware, this circuit does not exist, therefore DSM "fan speed mode" setting won't be able to control the fan speed. Solutions: There seems to be different solutions: Option 1: Utilize the DSM GUI. This solution uses a modified version of /usr/syno/bin/scemd so that the "fan speed mode" settings in DSM is redirected to your own fan speed control logic instead of Synology's proprietary circuit. This seems to be a more elegant solution as it retain the features of the DSM. Reference: https://github.com/NyaMisty/scemd_fanspeed_hook Option 2: Ignore the DSM GUI. This solution uses the /etc/fancontrol file to control the fan speed based on temperature. References: Please note: Either of the above solutions requires you to install hardware specific driver, which is usually missing from the 3rd-party loader. Otherwise, you'll get message like below: /opt/sbin/pwmconfig: There are no pwm-capable sensor modules installed I'm not a Linux guru. Can someone write a good document on how to load the sensor drivers? For your reference, this is an output of "sensors-detect" command: root@Q870:~# sensors-detect sensors-detect revision 5946 (2011-03-23 11:54:44 +0100) System: To be filled by O.E.M. Synoden Board: INTEL Corporation MAHOBAY This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): YES Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): YES Probing for Super-I/O at 0x2e/0x2f Trying family National Semiconductor'... No Trying family SMSC'... No Trying family VIA/Winbond/Nuvoton/Fintek'... Yes Found Fintek F71869A Super IO Sensors' Success! (address 0xa20, driver to-be-written') Probing for Super-I/O at 0x4e/0x4f Trying family National Semiconductor'... No Trying family SMSC'... No Trying family VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): YES Probing for IPMI BMC KCS' at 0xca0... No Probing for IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): YES Probing for National Semiconductor LM78' at 0x290... No Probing for National Semiconductor LM79' at 0x290... No Probing for Winbond W83781D' at 0x290... No Probing for Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): YES Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Next adapter: SMBus I801 adapter at f040 (i2c-0) Do you want to scan it? (yes/NO/selectively): YES Client found at address 0x50 Probing for Analog Devices ADM1033'... No Probing for Analog Devices ADM1034'... No Probing for SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for EDID EEPROM'... No Client found at address 0x52 Probing for Analog Devices ADM1033'... No Probing for Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': Chip `Intel digital thermal sensor' (confidence: 9) Driver `to-be-written': ISA bus, address 0xa20 Chip `Fintek F71869A Super IO Sensors' (confidence: 9) Note: there is no driver for Fintek F71869A Super IO Sensors yet. Check http://www.lm-sensors.org/wiki/Devices for updates. Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): YES Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors for initialization at boot time. You should now start the lm_sensors service to load the required kernel modules. Unloading i2c-i801... failed

Here's a AMD option (5xxx, 4xxx, and 3xxx Ryzen) with ECC support AND 8 SATA Ports: https://www.msi.com/Motherboard/PRO-B550M-VC-WIFI/Overview There are plenty of (intel or AMD) motherboards that would give you 8 SATA ports, but as for ECC - most will accept ECC RAM but will use it in non-ECC mode.. For that I think you'll need to go to industrial boards, or server boards. Here's a list of standard consumer motherboards with 8 SATA boards: https://pangoly.com/en/browse/motherboard?extra=SATA6Ports%3A8%2C10&sort=low

This could be a promising upgrade to my DS220+ if it can run Xpenology https://www.cnx-software.com/2023/10/25/aoostar-r1-an-intel-n100-2-bay-nas-mini-pc-and-2-5gbe-router/