interested 0 Posted December 11, 2013 Share Posted December 11, 2013 djelusion > try again Quote Link to post Share on other sites
Trantor 11 Posted December 11, 2013 Author Share Posted December 11, 2013 Hi Trantor,Any approx timescales on v1.1 ? I hope this week-end if I have enought free time Hi,I tried to update my ESXi virtual machine running DSM 4.2-3202 but I got error 21, any idea? Thanks! I'have build a working DSM 4.3 ESXi version with PVSCSI support(based on jukolaut work). Tested with ESXi 5.5 (but I'm not sure everything work properly.) I will post this, so expert ESXi people can give feedbacks Quote Link to post Share on other sites
colombodk 0 Posted December 11, 2013 Share Posted December 11, 2013 Trantor, I was wondering if you could try to make a test build suited to 32-bit CPUs? Given that the DS214play uses a 32-bit only (not able to process 64-bit) Intel Evansport SoC, the Intel Atom CE5335, it *must* be possible to compile and make a 32-bit version of XPEnology. I believe that a somewhat limited version of 4.2 was hacked, but it didn't work well and installation and setup was, well, cumbersome and limiting (file system usage limited to EXT2). Info from CPU-World: "The platform will support 32-bit Linux..." http://www.cpu-world.com/news_2012/2012 ... vices.html Evansport GPL: http://sourceforge.net/projects/dsgpl/f ... nsport%29/ Offering a 32-bit version opens up XPEnology usage for a whole range of older legacy hardware, such as the Intel 32-bit CPUs: Pentium 4, Core Duo, Pentium M etc. Looking forward to testing the v1.1. Do you have any idea of how many use XPEnology? Quote Link to post Share on other sites
vaguecupid 0 Posted December 13, 2013 Share Posted December 13, 2013 I have stall DSM on my NAS,but I find the disk cannot hibernate,the system writes data to the file every few minutes ,the location of the file is /var/log/messages. I open the file,like this: Dec 13 12:58:05 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:02:08 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:02:09 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:02:10 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:04:16 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:04:37 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:04:37 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:04:37 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:04:49 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:05:16 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:05:19 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:05:44 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:05:45 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:05:48 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:10:20 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:10:20 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:11:28 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:11:28 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:11:28 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:12:36 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:12:36 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result How to solve this problem,Thanks! Quote Link to post Share on other sites
xhitmanx 0 Posted December 13, 2013 Share Posted December 13, 2013 Hi@all Have some Problems after installation System going down in a Loop . some after boot the same think..... Hardware: DellT1500 with Adaptec ICP5165BR Quote Link to post Share on other sites
Trantor 11 Posted December 13, 2013 Author Share Posted December 13, 2013 Hi@all Have some Problems after installation System going down in a Loop . some after boot the same think..... Hardware: DellT1500 with Adaptec ICP5165BR Upcoming v1.1 will include latest aacraid driver (already in pre v1.1_v2 in drivers requests topic). But dsmatom own a RocketRAID 3620 Controller, disks are detected by the system but not by DSM Quote Link to post Share on other sites
nols 0 Posted December 13, 2013 Share Posted December 13, 2013 When I have an Raid Controller, LSI, Adaptec etc. Does the DSM create a Software-Rad or the Controller an Hardware-Raid an the DSM see one Volume? Quote Link to post Share on other sites
didlawowo 0 Posted December 14, 2013 Share Posted December 14, 2013 thx you for this job i wanna ask if it's possible to add the driver for usb ethernet gigabit ax88179_178a.ko in your next release ? i have seen dsm 5.0 beta open in january i hope it could be fun if it was possible to enjoy with Quote Link to post Share on other sites
xhitmanx 0 Posted December 14, 2013 Share Posted December 14, 2013 Hi@all Have some Problems after installation System going down in a Loop . some after boot the same think..... Hardware: DellT1500 with Adaptec ICP5165BR Upcoming v1.1 will include latest aacraid driver (already in pre v1.1_v2 in drivers requests topic). But dsmatom own a RocketRAID 3620 Controller, disks are detected by the system but not by DSM Hello@all Is is Great my system (Dellt1500 With Adaptec ICP5165BR) is running. I test it and give responce.. Great Great jop awesome in use pre v1.1_v2 with 4.3 build 3810++ (repack v1.0) Quote Link to post Share on other sites
Lockon 0 Posted December 14, 2013 Share Posted December 14, 2013 Smooth upgrade from v4.3 repackv 1.0 to update2 (4.3-3810). Anyone familar what could cause 'Thermal status' under ControlPanel/SystemInformation/General always showing 40C/104F ? Built on Asrock B75M R2 (intel Ivy brdige). Quote Link to post Share on other sites
vaguecupid 0 Posted December 15, 2013 Share Posted December 15, 2013 I have stall DSM on my NAS,but I find the disk cannot hibernate,the system writes data to the file every few minutes ,the location of the file is /var/log/messages.I open the file,like this: Dec 13 12:58:05 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:02:08 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:02:09 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:02:10 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result Dec 13 13:04:16 FrankLv-NAS file_download.cgi: file_download.cpp:742 sharing redirect faild to fetch query result How to solve this problem,Thanks! EDIT by Trantor : Thank you for this, but no need to yell ^^ I have found the problem. I change port 5000 to 9001,I change port back to 5,000,DSM can hibernate. Quote Link to post Share on other sites
Bagpuss 2 Posted December 18, 2013 Share Posted December 18, 2013 Installed 4.3-3810 with v1.1-beta2 of synoboot on a N36L MicroServer with 8GB ram and 5x3TB drives. Everything works fine out of the box (as far as I can tell). Only thing I've not yet tested is WOL. Massive thanks to everyone who has worked hard on this new release! Quote Link to post Share on other sites
texasPI 0 Posted December 18, 2013 Share Posted December 18, 2013 How do I apply update 2 to 4.3 3810? Quote Link to post Share on other sites
dyonissos 0 Posted December 18, 2013 Share Posted December 18, 2013 Installed 4.3-3810 with v1.1-beta2 of synoboot on a N36L MicroServer with 8GB ram and 5x3TB drives.Everything works fine out of the box (as far as I can tell). Only thing I've not yet tested is WOL. Massive thanks to everyone who has worked hard on this new release! Same on a gen8 Microserver (G2020T CPU, 2 GB RAM, 1x TB WD RED) The only issue is the noise. Fan is running constantly at 40-45% and it's a bit annoying. Quote Link to post Share on other sites
MarsManden 0 Posted December 18, 2013 Share Posted December 18, 2013 How do I apply update 2 to 4.3 3810? viewtopic.php?f=2&t=1082&start=330#p9060 Quote Link to post Share on other sites
texasPI 0 Posted December 18, 2013 Share Posted December 18, 2013 How do I apply update 2 to 4.3 3810? viewtopic.php?f=2&t=1082&start=330#p9060 Thank you. Quote Link to post Share on other sites
etsi 0 Posted December 18, 2013 Share Posted December 18, 2013 Thanks that worked for me too, upgrade done. Quote Link to post Share on other sites
sab 0 Posted December 19, 2013 Share Posted December 19, 2013 After the upgrade to 4.3 stopped working Bluetooth adapter asus bt-211. Writes insert the adapter... Quote Link to post Share on other sites
texasPI 0 Posted December 19, 2013 Share Posted December 19, 2013 I'm having a problem checking for updates. Everything was working fine yesterday and I have not made any changes. Any ideas on what might be the problem? My internet connection is fine. Quote Link to post Share on other sites
texasPI 0 Posted December 19, 2013 Share Posted December 19, 2013 After the upgrade to 4.3 stopped working Bluetooth adapter asus bt-211. Writes insert the adapter... I have the same problem with that adapter too. Quote Link to post Share on other sites
nsfw 0 Posted December 19, 2013 Share Posted December 19, 2013 Anyone try 3810 update 3 that was just released? Quote Link to post Share on other sites
Bagpuss 2 Posted December 19, 2013 Share Posted December 19, 2013 Anyone try 3810 update 3 that was just released? Yes. I've installed it on my N36L MicroServer, and it appears to work just fine. I did the following: 1) Download update using the DSM Update tool. 2) Create task that contains the following code: sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info 3) Run this task manually. 4) Logged in as root, and verified that autoupd@te.info was modified correctly (which it was). 5) Clicked update button in DSM update. The MicroServer rebooted, but hung during bootup. The last message before the hang is: [ 0.288134] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff]) I then power cycled the machine, and it all booted up just fine. I am running the v1.1 beta2 of synoboot, but I'm not sure if this is important. Hope that helps, Andy. Quote Link to post Share on other sites
vanaema78 0 Posted December 19, 2013 Share Posted December 19, 2013 Are there any guides with help how to upgrade from 4.2? Thanks. Quote Link to post Share on other sites
SK360 0 Posted December 19, 2013 Share Posted December 19, 2013 Updated just fine executing the same script used for update 2 Quote Link to post Share on other sites
texasPI 0 Posted December 20, 2013 Share Posted December 20, 2013 I'm having a problem checking for updates. Everything was working fine yesterday and I have not made any changes. Any ideas on what might be the problem? My internet connection is fine. I got my issue sorted out. I had to delete the previous update file (update 2) before it would allow me to check for new updates. Thanks to tantonsen in this thread: http://xpenology.com/forum/viewtopic.php?f=2&t=1959 Now the dsm4.3-3810 can be update to DSM 4.3-3810 UPDATE 3. who can break it? Hi, If ur all ready on Ver2 You must remove files autoupd@te.info from the root folder (rm /autoupd@te.info* via SSH) and follow instructions again: Download DSM update 3, execute code below and finaly install update. sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.