SK360

Can't you just vi the file from ssh at that point?

Will check it when I can get home to hardboot it. I was hoping I could SSH from work to reboot it but it keeps saying connection reset by peer. It ran for days ok after the card and hard drive were added, I did a Python, SABNZBD and SickBeard update last night from package center and woke up this morning to this issue for the first time. Hardbooted it and it was fine but by the time I got to work I was unable to access the webgui again. SAB/CP/SB are still running just fine and accessible and I can get in via DS File on my iPhone and browse my shares fine. I may try and switch to nanoboot & 4482 when I get home and see what happens or reinstall 4458 and see if it helps.

Having some issues running gnoBoot and 5.0-4458 Update 2. I ran out of space on my main storage volume so I added a SIL3132 SATA card and another 2TB drive. All was fine, it took about 38 hours to expand and all seemed great. Now I am having an issue where DSM web interface will just stop working. I am getting Internal Server Error - 500 and I can't SSH either. But Sickbeard, SAB, Couchpotato and all my network shares are still accessible. If I hard boot it, DSM will come up for a bit again and then die. Not sure what is going on

So this chipset works using Gnoboot?

Affected Products: OpenSSL 1.0.1 through 1.0.1f (inclusive) Vendor products with OpenSSL embedded (vendors will be publishing security advisories with patch releases as the week progresses) Non-Affected Products: OpenSSL 1.0.1g, 1.0.0 branch and 0.9.8 branch So you are fine.

I shut my box down, pulled the Trantor USB stick, wrote the gnoboot image to it, put it back in, picked gnoboot.me and updated using the latest full .pat file. Just like is outlined here... viewtopic.php?f=2&t=2545

Updated fine using antelos procedure using Gnoboot 10.4. Thanks.

viewtopic.php?f=2&t=2545 Followed the steps on the first post and had no issues moving from 4.3 3810 to 5.0 4458. My shares didn't show up at first but then I realized its because permissions got reset. After I added admin back to read/write on everything, all my data is here.

This is the tail of my messages file... I see these Kernel messages and they concerned me... but everything seems to work OK... is this ok? Jan 23 17:32:50 DiskStation avahi-daemon[10848]: Failed to add service 'DiskStation' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record Jan 23 22:33:09 DiskStation pulseaudio[15160]: [pulseaudio] shm.c: Failed to read /dev/shm/: No such file or directory Jan 23 22:33:09 DiskStation pulseaudio[15160]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/syno/libexec/dbus-daemon-launch-helper: Success Jan 23 22:33:09 DiskStation pulseaudio[15160]: [pulseaudio] socket-server.c: bind(): Address already in use Jan 23 22:33:09 DiskStation pulseaudio[15160]: [pulseaudio] module.c: Failed to load module "module-cli-protocol-unix" (argument: ""): initialization failed. Jan 23 17:35:09 DiskStation kernel: [ 228.568172] ------------[ cut here ]------------ Jan 23 17:35:09 DiskStation kernel: [ 228.568227] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371() Jan 23 17:35:09 DiskStation kernel: [ 228.568304] Hardware name: G31M-S2L Jan 23 17:35:09 DiskStation kernel: [ 228.568343] Modules linked in: snd_pcm_oss(O) snd_mixer_oss(O) snd_usb_audio(O) snd_pcm(O) snd_timer(O) snd_hwdep(O) snd_usbmidi_lib(O) snd_rawmidi(O) snd_seq_device(O) snd(O) snd_page_alloc(O) soundcore cifs udf isofs loop nfsd exportfs rpcsec_gss_krb5 ip6t_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_limit xt_state xt_tcpudp xt_multiport ipt_LOG usbhid nf_conntrack_ipv4 hid nf_defrag_ipv4 nf_conntrack usblp iptable_filter usb_storage ip_tables x_tables uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) synoacl_ext4(P) synoacl_vfs(P) btrfs zlib_deflate libcrc32c hfsplus md4 hmac ixgbe be2net igb(O) i2c_algo_bit dca fuse vfat fat cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc chainiv des_generic crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand acpi_cpufreq mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree usbcore psnap p8022 llc usb_common ipv6 sg r8101(O) r8168(O) tg3(O) e1000e(O) alx(O) mdio compat(O) [last unloaded: bromolow_synobios] Jan 23 17:35:09 DiskStation kernel: [ 228.569071] Pid: 1213, comm: md0_raid1 Tainted: P O 3.2.40 #15 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] Call Trace: Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_qc_issue+0x51/0x371 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_qc_issue+0x51/0x371 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? warn_slowpath_common+0x78/0x8d Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_qc_issue+0x51/0x371 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_qc_reinit+0x6d/0x7d Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_ioc32+0x15/0x15 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_scsi_translate+0xda/0x10f Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? ata_scsi_queuecmd+0x3f/0x70 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? scsi_dispatch_cmd+0x24b/0x276 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? scsi_request_fn+0x42e/0x45d Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? blk_queue_bio+0x294/0x2ad Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? generic_make_request+0x91/0xd0 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? submit_bio+0xa6/0xaf Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? md_super_write+0x58/0x83 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? md_update_sb+0x2df/0x435 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? md_check_recovery+0x20c/0x563 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? raid1d+0x33/0x123a Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? finish_task_switch+0x5a/0x79 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? need_resched+0x1e/0x28 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? __switch_to+0x116/0x22e Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? finish_task_switch+0x5a/0x79 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? schedule_timeout+0x1e/0xb8 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? md_thread+0xe4/0x102 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? wake_up_bit+0x22/0x22 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? md_trim_bio+0x105/0x105 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? kthread+0x6a/0x72 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? kernel_thread_helper+0x4/0x10 Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? kthread_bind+0x5c/0x5c Jan 23 17:35:09 DiskStation kernel: [ 228.569071] [] ? gs_change+0xb/0xb Jan 23 17:35:09 DiskStation kernel: [ 228.569071] ---[ end trace 216723e0f316c72f ]---

I have this release up and running on my gigabyte G31M-S2L... It's ICH7. I thought that ICH7 wasn't supousted to work?

I just finished the swap. Everything came up fine. Not sure if it mattered but I put the sata cables back into the same numbered ports 0-3 where they were before.

I have xpenology running on an old power hungry pentium D setup now. I just freed up a Core 2 Duo machine and would like to put that motherboard/processor in my XPEnology box. Will I have any issues if I just hook the hard drives up and boot from the same USB drive? I don't want to format the drives. It seems like it would be ok from posts I've found but figured I'd ask.

My ICH8 won't get past the AHCI bios screen with XPEnology installed either. Have to run in IDE. Works fine if I blow the partitions away.

Worked fine

Updated just fine executing the same script used for update 2

Having a strange issue with my intel DG965RY motherboard (ICH8) latest bios just updated... I have 3 2TB drives connected and they have worked fine in unraid in AHCI. When I install XPEnology and it reboots the box to write configuration it hangs on the POST screen. Only way to get it to go is to reset the bios and leave it in IDE mode. If I wipe the drives via a usb thumb drive I can get past the POST screen in AHCI no problem. I am currently up and running in IDE mode but would love to get it in AHCI. Anyone have any suggestions? This is frustrating.

We had the same problem. You have to go into the firewall settings in XPEnogyand allow the ports. I set it to all and the apps worked just fine.

Anyone using XPEnology with a USB 3.0 PCIe card? My motherboard doesn't have eSATA or USB 3.0 and I am looking for a way to speed up backup times to an external hard drive... Looking at an add in card like this. http://www.amazon.com/Anker%C2%AE-Expre ... er+usb+3.o But I don't see much or any mention of anyone using something like this successfully. Thanks.