The Chief Posted September 26, 2023 Share #1 Posted September 26, 2023 https://www.synology.com/en-global/releaseNote/DSM Спойлер Version: 7.2.1-69057 (2023-09-26) Important Note After installing this update, you will not be able to downgrade to a previous DSM version. This update will restart your Synology NAS. For the models below, you can only download the upgrade patch from Synology Download Center because you won't receive notifications for this update on your DSM. FS Series: FS3017, FS2017, FS1018 XS Series: RS18016xs+, RS4017xs+, RS3617xs+, RS3617xs, RS3617RPxs, RS18017xs+, DS3617xs, DS3617xsII, DS3018xs Plus Series: RS2416RP+, RS2416+, DS916+, DS716+II, DS716+, DS216+II, DS216+, DS1817+, DS1517+, RS2818RP+, RS2418RP+, RS2418+, RS818RP+, RS818+, DS1618+, DS918+, DS718+, DS218+, RS1219+ Value Series: DS416, DS416play, DS216, DS216play, DS116, RS816, DS1817, DS1517, RS217, DS418play J Series: DS416slim, DS416j, DS216j, DS418j, DS218j, DS419slim, DS119j What’s New NFS clients can now access information on shared folder quotas. Storage Manager has been modularized into a package to provide better system maintenance and update flexibility. Supports password setting by new users via links provided in emails. Fixed Issues Fixed an issue where Synology Account could not be signed out. Fixed a security vulnerability regarding Ghostscript (CVE-2023-36664). Fixed a security vulnerability regarding Sudo (CVE-2023-22809). Fixed a security vulnerability regarding OpenSSL (CVE-2023-1255). Fixed a security vulnerability regarding Zlib (CVE-2023-37434). Notes: This version is released in a staged rollout. 1 Quote Link to comment Share on other sites More sharing options...
The Chief Posted September 26, 2023 Author Share #2 Posted September 26, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: ARPL-i18n 23.9.6 / DS918+ (real SN) - Using custom extra.lzma: NO - Installation type: BAREMETAL — ASUS Z170I Pro Gaming (real MAC) / G4620 - Additional comments: First updated ARPL-i18n to version 23.9.6 with DSM 7.2.1 support, then updated DSM via GUI. Edited September 26, 2023 by The Chief Quote Link to comment Share on other sites More sharing options...
Rattagnau Posted September 26, 2023 Share #3 Posted September 26, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 update 3 - Loader version and model: ARPL-i18n 23.9.6 / DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Xeon X5690 - Asus P6T - 24GB 1333mhz ECC DDR3 - NIC HP NC360T PCIe - LSI 9207-8i - Additional comments: Manual update via GUI. Edited September 26, 2023 by Rattagnau Typo Quote Link to comment Share on other sites More sharing options...
tdse13 Posted September 27, 2023 Share #4 Posted September 27, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 update-3 - Loader version and model: PeterSuh-Q3/tinycore-redpill latest version - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock J4105-ITX - Additional comments: Manual update Quote Link to comment Share on other sites More sharing options...
The Chief Posted September 28, 2023 Author Share #5 Posted September 28, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: ARPL-i18n 23.9.7 / DS918+ (real SN) - Using custom extra.lzma: NO - Installation type: BAREMETAL — Asrock J3355B-ITX (real MAC) - Additional comments: First updated ARPL-i18n to version 23.9.7 with DSM 7.2.1 support, then updated DSM via GUI. Edited September 28, 2023 by The Chief Quote Link to comment Share on other sites More sharing options...
nicoueron Posted September 29, 2023 Share #6 Posted September 29, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: ARPL-i18n 23.9.6 / DS920+ (real SN) - Using custom extra.lzma: NO - Installation type: BAREMETAL — Intel Core i7 (real MAC) - Additional comments: First reboot to arpl menu from DSM, then update ARPL-i18n to version 23.9.6 and rebuild the loader with DSM 7.2.1 support, then updated DSM via GUI. Quote Link to comment Share on other sites More sharing options...
Ashman Posted September 29, 2023 Share #7 Posted September 29, 2023 1st Unit: Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 update-3 - Loader version and model: Latest ARC Loader - DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Datto Nas - Gigabyte Ga-97N Intel i7-4790 8GB Ram - Additional comments: Manual update 2nd Unit: Outcome of the update: UNUSABLE AFTER UPDATE - DSM version prior update: DSM 7.2-64570 update-3 - Loader version and model: Latest Arc Loader - DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - 4 Bay nas Chassis with Gigabyte N3150-ITX - 4 GB Ram - Additional comments: Manual Update installed without issue. Applied the update and when it rebooted, Unit would not see drives after update (was using Tinycore Redpill Loader prior to this update - Booted to Redpill and updated loader and after that network card would not grab an IP Booted into tinycore and it gave errors trying to setup the loader - Changed Loader to ARC Loader and ARC loader went flawless Grabbed IP, went through all loader settings and then Booted with ARC loader and system migrated fine and could access DSM but it was Very slow just opening control panel would take 30 to 45 seconds and clickign anything would take about the same amount of time or would just hang - After system has been up overnight, Can ping the device can get to the login screen but unit will not get past password screen. Cannot access shares via network unable to connect. Synology Assistant does not locate the Nas on the network - Find.synology.com Finds the unit right away without issue but still cannot access DSM past login screen or see shares. UPDATE: On the unit I was having issues with, I made a new Arc loader usb. I then deleted the versioning file by selecting allow downgrade. Upon boot I was able to select to remove my configuration but keep files and then reinstalled DSM 7.2.1-69057. System rebooted and is now running very nice and snappy. I suspect there was some corruption potentially of a configuration file. So far so good. Will continue testing. 1 Quote Link to comment Share on other sites More sharing options...
bluesnow Posted September 30, 2023 Share #8 Posted September 30, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1-42661 - Loader version and model: ARPL-i18n v23.9.7 / DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MSI H97 Mate, i7-4790, 16 GB DDR3, 4 x 4TB, 3 x 16TB, NIC Intel X540-T2, Realtek 8111G - Additional comments: manual update (with some wierd) After migration on first time works,without lost data and all recover. In a reboot test, the loader crash trying to access file. Try with another USB drive, make the pen drive about 4 times on different devices without no luck with arpl-i18n 23.9.4 version. Finally reset BIOS and change some values (Hot Swap, UEFI boot) and with arpl-i18n v23.9.7, finally all works without problems again. But with the latest version of DSM "accidentally" download by arpl with the config menu. Edited September 30, 2023 by bluesnow Quote Link to comment Share on other sites More sharing options...
AlexFullmoon Posted October 1, 2023 Share #9 Posted October 1, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2 64570 Update 3 - Loader version and model: arpl-i18n v23.8.11 -> v23.9.7 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE Microserver Gen7 N54L - Additional comments: Rebuilt flash; model 1621+; using tg3 driver, "disable_mtrr_trim" synoinfo. Edited October 1, 2023 by AlexFullmoon Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 2, 2023 Share #10 Posted October 2, 2023 Multiple threads have been merged into this one. 1 Quote Link to comment Share on other sites More sharing options...
valix Posted October 2, 2023 Share #11 Posted October 2, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2 64570 Update 3 (3622xs+) - Loader version and model: arpl-i18n v23.8.5 -> v23.9.7 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE Microserver Gen8 (Xeon E3 1220Lv2), Aquantia AQtion AQC107 NIC -> chosen Matching Modules - Additional comments: Rebuilt flash; model 3622xs+; Active Backup for Business needed a new activation. Edited October 2, 2023 by valix 1 Quote Link to comment Share on other sites More sharing options...
Flautista1988 Posted October 2, 2023 Share #12 Posted October 2, 2023 - Outcome of the update: FAILED on DS3622xs+ SUCCESSFUL but changed by DS923+ - DSM version prior update: DSM 7.2 64570 Update 3 (DS3622xs+) - Loader version and model: arpl-i18n v23.8.5 -> v23.9.7 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Additional comments: MAC issue, rebulit flash with DS923+ loader, no data loss and everything works fine. Quote Link to comment Share on other sites More sharing options...
Innocent Posted October 2, 2023 Share #13 Posted October 2, 2023 - Outcome of the update: FAILED on DS3622xs+ - DSM version prior update: DSM 7.2 64570 Update 3 (DS3622xs+) – was working very fine till update... - Loader version and model: tinycore-redpill (latest I think – updated it when installed DSM 7.2 64570 Update 3) - Using custom extra.lzma: NO - Installation type: Vm based – QNap TS-453D - Additional comments: Manual update via DSM FAILED. After reboot DSM was on recovery. Recovery did not help. Restarted into Tiny Core Image Build. ./rploader.sh clean ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DS3622xs+ ./rploader.sh satamap ./rploader.sh build ds3622xsp-7.2.0-64570 exitcheck.sh reboot FAILED Now HDD's not detected by DMS. Quote Link to comment Share on other sites More sharing options...
JohnSam15 Posted October 3, 2023 Share #14 Posted October 3, 2023 (edited) - Update: FAILED on DS918+ - DSM version before update: DSM 7.2 64570 Update 3 (DS918+) - Loader version and model: (TCRP) tinycore-redpill v0.9.4.9c - 23-10-01 - Using custom extra.lzma: NO - Installation type: VM - PROXMOX - B560M-A PRO + REALTEK 8125b (4PORTs) - Additional comments: Update via GUI DSM FAILED. Restarted into Tiny Core Image Build. Restored previous build - work OK ./rploader.sh clean ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh build ds918p-7.2.0-64570 exitcheck.sh reboot Edited October 3, 2023 by JohnSam15 Quote Link to comment Share on other sites More sharing options...
newuser7 Posted October 4, 2023 Share #15 Posted October 4, 2023 - Outcome of the update: SUCCESSFUL (kind of) - DSM version prior update: DSM 7.2 64570 Update 3 (DS3622xs+) - DSM version AFTER update: DSM 7.2.1 69057 (DS923+) - Loader version and model: arpl-i18n v23.8.5 -> v23.9.7 - Using custom extra.lzma: NO - Installation type: BAREMETAL - J5040 - Additional comments: Rebuilt flash; Note: Failed initially with DS3622xs+, tried 3 times. Managed to boot into DSM boot screen, going through steps to update to DSM7.2.1, and it failed at approximately 50% mark, tried both direct download or manual upload of file Following the comment from @Flautista1988 above, I selected DS923+ and booted it fine. File seems to be accessible so far, dockers running fine. Not sure what am I missing by changing from 3622xs+ to 923+, will need to read the doco to find out. Would like to get back to 3622xs+ if possible Quote Link to comment Share on other sites More sharing options...
DroidBoy Posted October 4, 2023 Share #16 Posted October 4, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: TCRP v0.9.4.9c with Friend - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Lenovo V330 laptop - Additional comments: Manual update via DSM Control Panel Quote Link to comment Share on other sites More sharing options...
Sonnenblume Posted October 4, 2023 Share #17 Posted October 4, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2 64570 Update 3 - DSM version AFTER update: DSM 7.2.1 69057 - Loader version and model: wjz304/arpl-i18n v23.6.6 (before) -> v23.9.7 (now), DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL Quote Link to comment Share on other sites More sharing options...
zsdd Posted October 4, 2023 Share #18 Posted October 4, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: ARPL-i18n 23.9.7 / DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Leno M700 Tiny minipc, Pentium G4400T, 8GB RAM, Onboard Intel I219-LV NIC - Additional comments: 1. Reboot to arpl, updated loader to latest version 2. Reboot to DSM, uploaded latest .pat file from synology 3. Reboot to updated DSM - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: ARPL-i18n 23.9.7 / DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Fujitsu PRIMERGY TX1310 M1 Tower Server, Intel i3-4130, 4GB RAM, Onboard Intel I210 NIC - Additional comments: 1. Reboot to arpl, updated loader to latest version 2. Reboot to DSM, uploaded latest .pat file from synology 3. Reboot to updated DSM Edited October 4, 2023 by zsdd Quote Link to comment Share on other sites More sharing options...
keqas78 Posted October 6, 2023 Share #19 Posted October 6, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 ( @pocopico's TCRP v0.9.4.9c with Friend 0.0.5j - DS3622xs+) - Loader version and model: @Peter Suh's TCRP 0.9.5.0 (M-Shell) / Friend 0.0.9 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP ProLiant MicroServer Gen8 - Additional comments: 1. Rebuilt loader with Peter Suh's TCRP (DSM 7.2.1-69057, DS3622xs+) 2. After reboot DSM offered migration -> loaded DSM_DS3622xs+_69057.pat manually Edited October 6, 2023 by keqas78 2 Quote Link to comment Share on other sites More sharing options...
Hello World Posted October 7, 2023 Share #20 Posted October 7, 2023 On 10/4/2023 at 4:38 PM, DroidBoy said: ri - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 ( @pocopico's TCRP v0.9.4.9c with Friend 0.0.5j - DS3617xs+) - Loader version and model: @Peter Suh's TCRP 0.9.5.0 (M-Shell) / Friend 0.0.9 - DS3617xs+ - Using custom extra.lzma: NO - Installation type: ESXI 7.0 U3 - Additional comments: 1. Rebuilt loader with Peter Suh's TCRP (DSM 7.2.1-69057, DS3617xs+) 2. After reboot DSM offered migration -> loaded DSM_DS3617xs+_69057.pat manually 1 Quote Link to comment Share on other sites More sharing options...
merve04 Posted October 7, 2023 Share #21 Posted October 7, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 7.2-64570 U3 - Loader version and model prior to update: Peter Suh's TCRP v0.9.4.3-2 w\Friend 0.0.8 (DVA1622) - Loader version and model after update: ARC 23.10.2 (DVA1622) - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte B365-DS3H, i5-8400, 8x12TB, 2x4TB - Additional comments: Updated via DSM GUI, rebooted, login to TCRP, let it auto update, initiate 7.2.1 loader build, no go. Rebuild USB with latest Peter Suh's v0.9.5.0 w\Friend 0.0.9 (DVA1622), no go, rebuild loader several times, different USBs, never would complete building loader, always failed on backup. Rebuild loader with latest ARC, booted back in DSM sucessfully. Edited October 7, 2023 by merve04 Quote Link to comment Share on other sites More sharing options...
satdream Posted October 8, 2023 Share #22 Posted October 8, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 U3 - Loader version and model: ARC Loader v23.10.2a DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen8 - 16Gb - Intel Xeon E3-1265L v2 2.5 Ghz - Intel NIC - SAS9202-16E-LSI - QNAP USB 3.0 Ethernet 5GbE - Additional comments: Update loader restoring config was not working, had to perform migration w/same S/N etc. then boot succesfull. QNAP USB 3.0 Ethernet 5GbE and all 20 HDDs + 2 SSDs perfectly working 1 Quote Link to comment Share on other sites More sharing options...
Nick4 Posted October 11, 2023 Share #23 Posted October 11, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 - Loader version and model: ARPL-i18n v23.6.x -> v23.10.1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte H270N Wi-Fi, Intel i3 7100T - Additional comments: Reboot required Spoiler 1. Back up DSM config. 2. Reboot to ARPL-i18n config mode. 3. Use the update menu update to update ARPL-i18n to the latest version. 4. Use "Boot to loader" in the menu and confirm to update the bootloader with the new changes. 5. When booted, manually download the update .pat file and install the update in DSM. 6. When rebooting during the update, go to ARPL-i18n config mode. 7. Select "Build the loader" in the menu. 8. Select "Boot the loader" in the menu. Quote Link to comment Share on other sites More sharing options...
valix Posted October 12, 2023 Share #24 Posted October 12, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2 64570 Update 3 (3622xs+) - Loader version and model: arpl-i18n v23.8.5 -> v23.10.0 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Fujitsu D3417-A1x w/ Xeon E3-1225v5, Aquantia AQtion AQC107 NIC, NVMe RW-Cache -> chosen all Modules - Additional comments: Update Menu, Rebuilt flash; model 3622xs+; Active Backup for Business needed a new activation Edited October 12, 2023 by valix Quote Link to comment Share on other sites More sharing options...
killerzac Posted October 13, 2023 Share #25 Posted October 13, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057 (3622xs+) - DSM current version after update: DSM 7.2.1 69057 update 1 (3622xs+) - Loader version and model: arpl-v1.1-beta2 - Using custom extra.lzma: NO - Installation type: ESXi - Additional comments: Only Reboot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.