Qoo Posted November 3, 2016 Share #976 Posted November 3, 2016 I'm still stuck on the "Booting the kernel ..." with no DSM access screen after leaving it over night. I've checked my router/switch and the server doesn't have an assigned ip address. Same here, after it worked for about two Weeks with restarts every day... Quote Link to comment Share on other sites More sharing options...
connectit Posted November 3, 2016 Share #977 Posted November 3, 2016 Hey there, I've failed booting from USB on my Microserver Gen. 8. Anybody running successfully Juns v1.0.1 on a HP Microserver? The problem maybe is the GPT partition table which comes from Win32DiskImager. But is there an alternate tool to create an MBR formated boot drive? Edit: Problem was a defect USB Stick, trying another works like a charm Quote Link to comment Share on other sites More sharing options...
nols Posted November 3, 2016 Share #978 Posted November 3, 2016 I would love to have a Hyper-V Iso Image Quote Link to comment Share on other sites More sharing options...
gtaking112 Posted November 3, 2016 Share #979 Posted November 3, 2016 Does someone have step by step instructions for editing the vmdk file to add serial/mac? I have been running DSM 6 on bare metal for a few day without issue but I am trying to migrate to ESXi. Running into odd "Operation Failed" messages when trying to edit settings for example changing the port from 5000. Any help would be greatly appreciated thanks Quote Link to comment Share on other sites More sharing options...
jjLDN Posted November 3, 2016 Share #980 Posted November 3, 2016 For those interrested, the update 6.1 Beta do NOT works via update function, using the given pat file by Synology https://global.download.synology.com/do ... _14871.pat Did you manage to install it manually and works fine with patcher? Quote Link to comment Share on other sites More sharing options...
jjLDN Posted November 3, 2016 Share #981 Posted November 3, 2016 (edited) For those interrested, the update 6.1 Beta do NOT works via update function, using the given pat file by Synology https://global.download.synology.com/do ... _14871.pat Did you manage to install it manually and works fine with patcher? Edited November 3, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
bartjuu Posted November 3, 2016 Share #982 Posted November 3, 2016 I would love to have a Hyper-V Iso Image Me to! Guys, is there any insight in an Hyper-V ISO image? Quote Link to comment Share on other sites More sharing options...
jokerigno Posted November 3, 2016 Share #983 Posted November 3, 2016 Does anybody tried this loader with Dell T20 Poweredge? Inviato dal mio A0001 utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
sweebee Posted November 3, 2016 Share #984 Posted November 3, 2016 Something changed in the bios synoboot? the first one i could open on my mac. Loaded the v1.01 to an usb stick but i can't open the stick on my mac to change the grub.cfg. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 3, 2016 Share #985 Posted November 3, 2016 (edited) Something changed in the bios synoboot? the first one i could open on my mac. Loaded the v1.01 to an usb stick but i can't open the stick on my mac to change the grub.cfg. This is expected and is explained a few pages back. Have a read. Edited November 4, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
gritor Posted November 3, 2016 Share #986 Posted November 3, 2016 I updated my HP N54L 5.2 to 6.0.2 and worked very well, after that, I updated to update 2, and now doesn't work any service SSH,HTTP,etc I cant conect to web DSM 5000 port. I try to reinstall 6.0.2 but dont find the dsm in synology assistant. Any idea? Quote Link to comment Share on other sites More sharing options...
trublu Posted November 4, 2016 Share #987 Posted November 4, 2016 I get to this screen but can't connect to or find dsm using synology assistant. Any pointers from anyone? http://imgur.com/a/c8Ysx Looks like I found my issue. My machines has C2000 SoC I354 Quad GbE NIC controllers & LSI SAS 9211-8i. The first image (setsunakawa's) I tried supported my NIC but not the LSI HBA. Jun's image suppports the LSI HBA but not the NICs. Can someone point me to a wiki or documentation that can help me with building in additional drivers? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 4, 2016 Share #988 Posted November 4, 2016 (edited) I updated my HP N54L 5.2 to 6.0.2 and worked very well, after that, I updated to update 2, and now doesn't work any service SSH,HTTP,etc I cant conect to web DSM 5000 port. I try to reinstall 6.0.2 but dont find the dsm in synology assistant. Any idea? As far as I am aware people who have updated to update 2 didn't have any problems, so the issue must be coming from your machine or from an update that went wrong. The reasons behind your issue could be multiple. I did experience something similar to you but only when I changed mtu to 9000. I couldn't access my machine through most services but strangly I could still access plex and a few other stuff through very specific ports. Are your NICs bonded? If not do you have mtu set above 1500? If yes you might have to acces your installation through a live ununtu cd. If you search this thread you will find my posts about it. If it's none of the above then come back here. Edited November 4, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
gtaking112 Posted November 4, 2016 Share #989 Posted November 4, 2016 Hi Folks, I successfully edited the vmdk to add my actual Synology serial without issues by mapping and editing the vmdk on VMWare Workstation I have successfully installed and updated DSM 6 on ESXi but I cannot boot with my LSI 9211-8i in IT mode via PCI Passthrough. When I add the card to the VM, It will disconnect me from the host and fail to boot. Anyone with this card encounter this issue? I'm using Jun's Mod V1.01. I've seen a few people say this card works without issue so I'd be interested to know your step by steps. Cheers Quote Link to comment Share on other sites More sharing options...
loonyd Posted November 4, 2016 Share #990 Posted November 4, 2016 can't find my APC BK650 UPS, anyone has the same problem? Quote Link to comment Share on other sites More sharing options...
neonflx Posted November 4, 2016 Share #991 Posted November 4, 2016 has anyone been able to get 2 or more Nic's working, I have a single card that is recognized and I have tried 2 quad cards 210i and older intel pro quad and while they are recognized I can't get an ip, Quote Link to comment Share on other sites More sharing options...
quicknick Posted November 4, 2016 Share #992 Posted November 4, 2016 has anyone been able to get 2 or more Nic's working, I have a single card that is recognized and I have tried 2 quad cards 210i and older intel pro quad and while they are recognized I can't get an ip, Been able to use 4 no issues. Sent from my SM-N920T using Tapatalk Quote Link to comment Share on other sites More sharing options...
quicknick Posted November 4, 2016 Share #993 Posted November 4, 2016 I will be providing updated loader with configuration tool to assist everyone modifying configurations from within xpenology so no one will have to modfy in boot cds or other methods. I will start a new thread on that this weekend. Stay tuned! Sent from my SM-N920T using Tapatalk Quote Link to comment Share on other sites More sharing options...
quicknick Posted November 4, 2016 Share #994 Posted November 4, 2016 I get to this screen but can't connect to or find dsm using synology assistant. Any pointers from anyone? http://imgur.com/a/c8Ysx Looks like I found my issue. My machines has C2000 SoC I354 Quad GbE NIC controllers & LSI SAS 9211-8i. The first image (setsunakawa's) I tried supported my NIC but not the LSI HBA. Jun's image suppports the LSI HBA but not the NICs. Can someone point me to a wiki or documentation that can help me with building in additional drivers? A new loader with included drivers will be out in the coming days. Stay tuned. Sent from my SM-N920T using Tapatalk Quote Link to comment Share on other sites More sharing options...
apple3000 Posted November 4, 2016 Share #995 Posted November 4, 2016 Just convert synoboot.img to vhd with Starwind Convert. work very well. Boot but if you fail, it maybe ethernet problem.. Quote Link to comment Share on other sites More sharing options...
D.S Posted November 4, 2016 Share #996 Posted November 4, 2016 has anyone been able to get 2 or more Nic's working, I have a single card that is recognized and I have tried 2 quad cards 210i and older intel pro quad and while they are recognized I can't get an ip, Been able to use 4 no issues. Sent from my SM-N920T using Tapatalk Could you advise what config on grub.cfg to make 4 nic work? I tried to add mac address / remove mac, but both can't work. I'm using 2 onboard Intel Lan and one single Intel Lan card with 2 ports. Quote Link to comment Share on other sites More sharing options...
cferra Posted November 4, 2016 Share #997 Posted November 4, 2016 I will be providing updated loader with configuration tool to assist everyone modifying configurations from within xpenology so no one will have to modfy in boot cds or other methods. I will start a new thread on that this weekend. Stay tuned! Sent from my SM-N920T using Tapatalk Thanks quicknick! Could you possibly bake in the Mellanox drivers too? Quote Link to comment Share on other sites More sharing options...
tdutrieux Posted November 4, 2016 Share #998 Posted November 4, 2016 Hi Folks, I successfully edited the vmdk to add my actual Synology serial without issues by mapping and editing the vmdk on VMWare Workstation I have successfully installed and updated DSM 6 on ESXi but I cannot boot with my LSI 9211-8i in IT mode via PCI Passthrough. When I add the card to the VM, It will disconnect me from the host and fail to boot. Anyone with this card encounter this issue? I'm using Jun's Mod V1.01. I've seen a few people say this card works without issue so I'd be interested to know your step by steps. Cheers Hello, I'm using the same setup than you. When I tried with Jun's V1.0, I installed DSM6 on a separate virtual disk. It was just for testing and do not want to upgrade DSM on the disks connected to the LSI as they contain prod data (I still use them in a VM running DSM5.2) The VM started without any problem with the LSI connected via PCI passthrough. And DSM see the disk and volume present on the LSI (just complaining about the system partition but that's normal). Could you explain what's the exact step causing the issue ? Regards, TitiD Quote Link to comment Share on other sites More sharing options...
snakefox666 Posted November 4, 2016 Share #999 Posted November 4, 2016 Hello All, I have updated my HP N40L successfully, thanks for the authors of this loader !!! Just a "little" thing regarding the UPS, nothing was detected and it was working before in 5.2 (USB UPS) Any idea ? Quote Link to comment Share on other sites More sharing options...
michelb Posted November 4, 2016 Share #1000 Posted November 4, 2016 can't find my APC BK650 UPS, anyone has the same problem? Yes same problem no UPS support Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.