trublu

Members
  • Content count

    52
  • Joined

  • Last visited

Community Reputation

0 Neutral

About trublu

  • Rank
    Regular Member
  1. trublu

    DSM 6.1.1-15101

    Updated to 6.1.1-15101 u2 using Jun's v.1.02a loader. No issues so far.
  2. trublu

    DSM 6.1.1-15101

    I'm also up and running on 6.1.1-15101 I had 6.1.15047 running using the Jun 1.02a bootloader so I simple used the DSM update menu BUT did a manual install using the pat file from the Synology site and then updating after reboot.
  3. trublu

    DSM 6.1.x Loader

    Did you already have an existing DSM install? This happened to me and the only fix was to use the original usb drive that i'd used for the already running DSM even though the non-working USB was fine.
  4. trublu

    Jun's Alpha Loader for DSM 6.1

    redacted*
  5. trublu

    DSM 6.1.x Loader

    I put logs up but gave up on v1.02a2 ds3617xs. I dont think juns patch for it is working just yet. Rolled back to 1.02a ds3615xs with injected broadcom 3617xs works fine for me. What DSM version?
  6. trublu

    DSM 6.1.x Loader

    thanks, found it. Noticed that the newer rmadisk yoou used has an earlier date than the 1.01 image
  7. trublu

    DSM 6.1.x Loader

    Which ramdisk.lzma are you referring to as the latest? Sorry I did't typed it correctly it's https://mega.nz/#F!Oc8TCLgD!IiullNuGs95 ... w!qVVE2RSa How did you modify the img file to add the newer ramdisk.lzma?
  8. trublu

    DSM 6.1.x Loader

    I had the same problem this is the motherboard that I'm using https://www.supermicro.com/products/mot ... 0SLH-F.cfm. I did some digging thru the forum and what you need to do is to edit grub.cfg. Apparently you have to load ramdisk.lzma first. Open grub.cfg and look for initrd $img/ramdisk.lzma $img/$extra_initrd reaplce with initrd $img/$extra_initrd $img/ramdisk.lzma. I had to replace ramdisk.lzma with the latest one. Just put ramdisk.lzma into image\DS3615xs\. I couldn't find synology via http://find.synology.com so just ad :5000 at the end of ip. Worked like a charm, was able to upgrade to the latest dsm without issues. Also if you wish to gain SHR you need to edit synoinfo.conf. I found this guide i'ts not in English but it will do http://www.hdvietnam.com/threads/nang-c ... c.1269562/ Which ramdisk.lzma are you referring to as the latest?
  9. trublu

    USB 3.0 Gigabit Ethernet Adapter

    The Plugable USB3-E1000 works with Quicknick's and Jun's loaders.
  10. Did you change sataPortMap to get this working with your 8-bay UNAS?
  11. edit /etc.defaults/synoinfo.conf add: support_syno_hybrid_raid="yes" remove/comment out: supportraidgroup="yes"
  12. Hardware: UNAS NSC-800 with SAS Backplane Motherboard: Supermicro a1sai-2750f with I354 LAN chpset LSI SAS 9211-8i Install Type: Baremetal with DSM 5 currently installed Issue: Network/Disks not found Network card isn't recognized (no DHCP leases). However, when I connect an AX88179 USB LAN adapter, the other NICs then show up in Synology Assistant. At this point i then get an option to install but no HDDs are detected. Thanks for any insight! Are the SATA ports set to AHCI? Onboard SATA ports are disabled.
  13. trublu

    DSM 6.1.x Loader

    2 out of my 8 disks don't show in storage manager and this is resulting in a degraded volume. i also noticed that the two missing disks show up as ejectable external devices. Does any one know how to fix this?
  14. Hi trublu, When you say USB LAN adapter, which make/model did you use? I'm using Plugable Technologies USB3-E1000. It uses an AX88179 chipset.
  15. No, but you can buy me a glass of red wine or a bottle of it [emoji3] Sent from my SM-N920T using Tapatalk Hey UNSC-117, i see you're using the 8 bay UNAS also. Did you have any issues with all eight drives showing up in DSM 6? Did you make any change to sataPortMap? Thanks