tdutrieux
-
Posts
16 -
Joined
-
Last visited
tdutrieux's Achievements
Newbie (1/7)
0
Reputation
-
Do you mean when building the loader, or when bootlng the loader after building ? If it's when booting, how to access the log ? Sorry for being a bit noob... Thanks.
-
Hi everybody. I currently have a problem for building DS918+ (7.0.1 - 42218) Platform is ESXI 7.0u3 Install went smooth but when DSM is installed, I get 'Recoverable' is Synology Assistant. Then I do 'recovery' and reboot -> still 'Recoverable'. BTW, I tried exactly the same setup and installation steps but with DS3622xs, and it works perfectly. Seems then to have a specific problem with DS918+. Anybody experienced the same problem ? Thanks in advance, TitiD
-
Hi there, Anybody have some guidance about choose the right NAS model regarding the CPU ? DSM-Redpill will be hosted on ESXI V7.0 with a Core I7-7700 @3.6GHz) CPU. I would say that the DS918+ is OK as the Apollo Lake is the cheap version of Kaby Lake (Core I7-770). Any thought ? Thanks, TitiD
-
Hey, the trick works ! Thanks for the help. Regards, TitiD
-
Hi, thanks for helping but still the same problem with this config :
-
Maybe could somebody make an OVF for ESXi that's working well for testing ? Thanks ! TitiD
-
Hello, If I'm correct, both files are located on the synoboot image, right ? I didn't change anything on the synoboot, just using the downloaded files right away. Regards, TitiD
-
Yes, fore sure ! I forgot to mention... Regards, TitiD
-
Nope ! I've another VM with DSM6.1 and LSI 9008-IT as PCI passthrough and 5 HDD. If I connect the LSI to the DSM6.2 VM, one HDD takes drive 1. So anybody else experiencing the same issue ? Thanks, TitiD
-
Hi, I experience one small problem. I'm on ESXi6.5 with synoboot as SATA0:0 and a virtualdisk as SCSI0:0 The system bootup and seems to work fine. The only problem is that I don't have a drive 1, and the virtual disk shows as drive 2. BTW, the synoboot disk isn't shown. I've tried with both 3615 and 3617. Anybody experiencing that ? and solved that ? Thanks, TitiD
-
Hello all ! I've successfully installed DSM6 using Jun V1.01. System is : - ESXi 6 - LSI2008 in ITmode in PCI passthrough I currently still use a DSM 5.2 for 'production'. That means all home data (Documents/Media). It's now more than 1 month that everybody seems to be happy with the Jun's Loader. I'm asking myself now if it's safe enough to migrate production to DSM6. Any good or bad experience with a production DSM6 running on a similar setup ? Thanks for any input !!! KR, Tdutrieux
-
Hello, I'm using the same setup than you. When I tried with Jun's V1.0, I installed DSM6 on a separate virtual disk. It was just for testing and do not want to upgrade DSM on the disks connected to the LSI as they contain prod data (I still use them in a VM running DSM5.2) The VM started without any problem with the LSI connected via PCI passthrough. And DSM see the disk and volume present on the LSI (just complaining about the system partition but that's normal). Could you explain what's the exact step causing the issue ? Regards, TitiD
-
Hello ! Test report : I was able to install DSM6 using Jun's loader V1.0. The platform is ESXi6 with LSI2008 pci passthrough. Disks on the LSI are properly detected. I also first added a virtual disk to install DSM6 as I do not not want to do the migration right now. Cannot say anything on stability right now, just reporting my first test as it's the first time I can see disks on the LSI in ESXi. Now waiting further before migration of important data. KR, TitiD
-
Hello, Anyone managed to install DSM6 in ESXi with a LSI8211 configured in pci passthrough ? I tried myself but the disks connected to the LSI are not detected. Best regards, TitiD
-
Thanks for you reply. I think I'll wait some time before upgrading to DSM6 using PCI passthrough and LSI. Regards, Titi
