Peter Suh Posted April 11, 2022 Share #2251 Posted April 11, 2022 (edited) The "RedPill TinyCore Loader Installation Guide for DSM 7.0.1 Bare Metal" has been approved to be listed as a separate topic in the "Tutorials and Guides" section. Please forget about the postupdate action, which is the transition action in the middle. @pocopico agreed to this. Guide to Two Step Update (TSU) that has been built more than once Based on the approved guide, I'll upload it as the second guide. Edited April 11, 2022 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 11, 2022 Share #2252 Posted April 11, 2022 @dolbycattold me how to use the REALTEK USB LAN card, so I'm sharing it. ------------------------------------------------------------------------------------------- The NIC is a USB 2.5G LAN. The 2.5G environment is not yet available, so the speed is meaningless, but it works well. https://github.com/bb-qq/r8152/releases For DS920+ r8152-geminilake-2.15.0-5.spk I applied the file and did it as below. sudo install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su Quote Link to comment Share on other sites More sharing options...
zahni Posted April 11, 2022 Share #2253 Posted April 11, 2022 Hi guys, After a lot of activities and posting here recently about migrating to version 7.1, I now have a quick question. What is the best way to upgrade my ds3622xsp(Baremetal on HP Microserver Gen8) , which is running on 7.01, to broadwellnk-7.1.0-42621 ? Thanks in advance for the support ! Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 11, 2022 Share #2254 Posted April 11, 2022 30 minutes ago, zahni said: Hi guys, After a lot of activities and posting here recently about migrating to version 7.1, I now have a quick question. What is the best way to upgrade my ds3622xsp(Baremetal on HP Microserver Gen8) , which is running on 7.01, to broadwellnk-7.1.0-42621 ? Thanks in advance for the support ! Here's the tutorial your looking for My personal experience was using dsm701, manual update to 7.1-42661 from synology, on the reboot press down arrow on keyboard to load back to TC and complete the 2 build upgrade process linked by peter suh.. worked for me first try Good luck 1 1 Quote Link to comment Share on other sites More sharing options...
zahni Posted April 11, 2022 Share #2255 Posted April 11, 2022 (edited) 1 hour ago, phone guy said: Here's the tutorial your looking for My personal experience was using dsm701, manual update to 7.1-42661 from synology, on the reboot press down arrow on keyboard to load back to TC and complete the 2 build upgrade process linked by peter suh.. worked for me first try Good luck Hi @phone guy, Thanks a lot for your Response. I'll try it out soon. Edited April 11, 2022 by zahni Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 11, 2022 Share #2256 Posted April 11, 2022 On 4/9/2022 at 7:46 PM, Peter Suh said: The second NIC is not an onboard type, but an external USB type NIC. I have the same model There have been no successful cases of REALTEK USB NIC I tried to use it, but I failed. It seems like the driver needs to be modified, but only @pocopico can solve it. Found a solution to getting ReakTek USB lan adapters to work. My onboard 2nd NIC port. It seems we were fighting against dsm removing that function of supporting usb lan adapters, not having the correct r8152 driver at build. It required a modified r8152 driver that will load and run in dsm7 with its restrictions in place. This guy figured it out, and my second nic port worked immediately. though it still shows it default mac and not mac2= in user_config.json, I do not how to change its mac, if anyone can help with that. https://github.com/bb-qq/r8152/releases he has instruction, basically get his file in the right folder and presto, my second nic port eth1 internal but obviously on the usb bus not the pci bus. Instantly worked... @pocopico needs to add this in the package building, that way it will just work on build. @IG-88 tried to help me with this too, so I hope he gets the chance to see it working and hopefully get it included in the next release or at least an easy add ext command. @Jizar Stoffel method didnt work for me, but this method did. ds918 apollolake dsm7.1-42661 works no issues. Thank you all for the help. 1 Quote Link to comment Share on other sites More sharing options...
totikk Posted April 11, 2022 Share #2257 Posted April 11, 2022 Hello. I'm trying to install 7.1.0-42661 DS3615xs, clean install, bare metal on lga775 Q9950. Use this method : ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build bromolow-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Everything goes well, however, after installing and trying to connect to the web, "Sorry, the page you are looking for is not found." and turns off. 7.0.1-42218 - installs and works without problems. Can someone help ? Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 11, 2022 Author Share #2258 Posted April 11, 2022 33 minutes ago, totikk said: Hello. I'm trying to install 7.1.0-42661 DS3615xs, clean install, bare metal on lga775 Q9950. Use this method : ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build bromolow-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Everything goes well, however, after installing and trying to connect to the web, "Sorry, the page you are looking for is not found." and turns off. 7.0.1-42218 - installs and works without problems. Can someone help ? did the redpill-misc got auto included ? if not you should add it. Quote Link to comment Share on other sites More sharing options...
Bose321 Posted April 11, 2022 Share #2259 Posted April 11, 2022 I finally got my ethernet adapter to work on Unraid. However, now I am struggling with the disks to work. I've got the loader as a USB, and got one virtual SATA disk. When I run lspci -nnq I see 1 SATA controller with 6 disks (which is weird?). I've set my virtual disk as first one. When I run the satamap I get these values: SataPortMap=6 DiskIdxMap=00 Those seem logical but it gets stuck on 55% when installing. How can I retrieve the correct values? I don't really understand how/why the controller returns there are 6 disks. Should I try 1 and 00? Quote Link to comment Share on other sites More sharing options...
totikk Posted April 11, 2022 Share #2260 Posted April 11, 2022 15 minutes ago, pocopico said: did the redpill-misc got auto included ? if not you should add it. No, it didtn't. at what step should I do this, and can you write this command in full, with the repository address. Unfortunately, I have very little knowledge of Linux. Thank you Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 11, 2022 Author Share #2261 Posted April 11, 2022 2 minutes ago, totikk said: No, it didtn't. at what step should I do this, and can you write this command in full, with the repository address. Unfortunately, I have very little knowledge of Linux. Thank you before executing build you can use ./rploader.sh ext <platform> add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json 1 Quote Link to comment Share on other sites More sharing options...
loveburn Posted April 11, 2022 Share #2262 Posted April 11, 2022 45 минут назад, pocopico сказал: rploader.sh ext It's a additional modules (drivers) include mode before building loader? Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 11, 2022 Share #2263 Posted April 11, 2022 https://github.com/pocopico/redpill-load/raw/master/redpill-virtio/rpext-index.json @pocopico it looks like here within the /rpext-index.json is a syntax error at the end of the file: <<<<<<< HEAD ======= >>>>>>> develop Could you maybe check this? Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 11, 2022 Share #2264 Posted April 11, 2022 One additional point when I add the acpid extension via: ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-acpid/rpext-index.json I receive the following error at the end of the build process: [-] The extension jumkey.acpid2 was found. However, the extension index has no recipe for ds3622xsp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [-] Failed to update recipe for jumkey.acpid2 extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) @pocopico should the url parameter point to your repo? Quote Link to comment Share on other sites More sharing options...
totikk Posted April 11, 2022 Share #2265 Posted April 11, 2022 50 minutes ago, pocopico said: you can use It doesn't help. I do so: ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh ext bromolow-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build bromolow-7.1.0-42661 // at this stage it says extantion exist, and continuing building 7.1.0-42661 // ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; sudo reboot then install DSM with no errors, and after reboot "Page you looking for is not found" and immediately sutdown Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 11, 2022 Author Share #2266 Posted April 11, 2022 6 minutes ago, Dreadnought said: One additional point when I add the acpid extension via: ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-acpid/rpext-index.json I receive the following error at the end of the build process: [-] The extension jumkey.acpid2 was found. However, the extension index has no recipe for ds3622xsp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [-] Failed to update recipe for jumkey.acpid2 extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) @pocopico should the url parameter point to your repo? 10 minutes ago, Dreadnought said: https://github.com/pocopico/redpill-load/raw/master/redpill-virtio/rpext-index.json @pocopico it looks like here within the /rpext-index.json is a syntax error at the end of the file: <<<<<<< HEAD ======= >>>>>>> develop Could you maybe check this? Check both, fixed i think 2 1 Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 11, 2022 Share #2267 Posted April 11, 2022 (edited) 27 minutes ago, pocopico said: Check both, fixed i think @pocopico could you please also correct the url parameter for https://github.com/pocopico/redpill-load/raw/master/redpill-virtio/rpext-index.json Here I get the same error like for acpid2 before. acpid2 looks great now. UPDATE: @pocopico thanks for your fix, now the build process is working Edited April 11, 2022 by Dreadnought 1 Quote Link to comment Share on other sites More sharing options...
ditheo Posted April 11, 2022 Share #2268 Posted April 11, 2022 1 hour ago, totikk said: It doesn't help. I do so: ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh ext bromolow-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build bromolow-7.1.0-42661 // at this stage it says extantion exist, and continuing building 7.1.0-42661 // ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; sudo reboot then install DSM with no errors, and after reboot "Page you looking for is not found" and immediately sutdown I had the same error with you. How many network cards do you have? is it Baremetal or vm? Quote Link to comment Share on other sites More sharing options...
SirNoish Posted April 11, 2022 Share #2269 Posted April 11, 2022 (edited) Sorry for my English by Google. I am having problems with the loaders generated with TC in virtual with virtualbox. For example, with the 918+ loader I have no problems when I try the loader in baremetal (asrock j1900), if I try it in virtualbox (Gigabyte P55A-UD3R Xeon X3470) it doesn't assign me an ip. With other models, DVA3221 or 3615xs, I can't get the network card to assign me an IP either. In the 918+ loader I have the driver for the intel e1000e, in the dva3221 loader I also have the same e1000e driver but it doesn't work, I don't see the device on my router. Do you know what I can look to find the problem? Regards, and thank you very much. Edited April 11, 2022 by SirNoish Quote Link to comment Share on other sites More sharing options...
totikk Posted April 11, 2022 Share #2270 Posted April 11, 2022 (edited) 1 hour ago, ditheo said: I had the same error with you. How many network cards do you have? is it Baremetal or vm? Baremetal. It's Asus P5Q-E motherboard with integrated 2 LAN adapters I don't think it's related to network cards. I tried disabling each of them in the BIOS. And after installing the DSM, there is access to it. Edited April 11, 2022 by totikk Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 11, 2022 Share #2271 Posted April 11, 2022 (edited) 3 hours ago, Dreadnought said: @pocopico could you please also correct the url parameter for https://github.com/pocopico/redpill-load/raw/master/redpill-virtio/rpext-index.json Here I get the same error like for acpid2 before. acpid2 looks great now. UPDATE: @pocopico thanks for your fix, now the build process is working I was able to create the loader and install DSM 7.1-42661 (including redpill-misc extension) but I have still the shutdown issue. Edited April 11, 2022 by Dreadnought Quote Link to comment Share on other sites More sharing options...
ditheo Posted April 11, 2022 Share #2272 Posted April 11, 2022 1 hour ago, totikk said: Baremetal. It's Asus P5Q-E motherboard with integrated 2 LAN adapters I don't think it's related to network cards. I tried disabling each of them in the BIOS. And after installing the DSM, there is access to it. 22 minutes ago, Dreadnought said: I was able to create the loader and install DSM 7.1-42661 (including redpill-misc extension) but I have still the shutdown issue. log in to serial console and then go to /usr/syno/lib/systemd/scripts give command : sudo ./syno-kernel-modules-load.sh That I ran to my proxmox and the problem is gone. See if you can solve with this temporary solution Quote Link to comment Share on other sites More sharing options...
Badger Posted April 11, 2022 Share #2273 Posted April 11, 2022 21 hours ago, pocopico said: See my previous post Can't ssh into the DSM.... "connection refused". Right now the DSM is at the "recover" screen. Quote Link to comment Share on other sites More sharing options...
ditheo Posted April 11, 2022 Share #2274 Posted April 11, 2022 1 minute ago, Badger said: Can't ssh into the DSM.... "connection refused". Right now the DSM is at the "recover" screen. plain telnet? Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 11, 2022 Share #2275 Posted April 11, 2022 2 minutes ago, ditheo said: log in to serial console and then go to /usr/syno/lib/systemd/scripts give command : sudo ./syno-kernel-modules-load.sh That I ran to my proxmox and the problem is gone. See if you can solve with this temporary solution I am testing on a barematel device without serial Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.