pocopico Posted April 12, 2022 Author Share #2351 Posted April 12, 2022 36 minutes ago, Jeja said: Hi all, i'm trying to build a new DS3622xs VM on esxi, i'm following the 2 step update guide, but i'm getting this error after ./rploader.sh build broadwellnk-7.1.0-42661 @pocopico ? Increase RAM 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2352 Posted April 12, 2022 23 minutes ago, Bose321 said: I've put the TCRP disk on as a USB, and the data disk as a SATA disk. Should that be enough, or should I still put the data disk on another controller? Oh so you are using QEMU or Proxmox ? Then USB is fine as long as it is listed correctly with fdisk -l inside DSM installation After you get this message telnet is started. You can telnet and check Quote Link to comment Share on other sites More sharing options...
Jeja Posted April 12, 2022 Share #2353 Posted April 12, 2022 1 hour ago, pocopico said: Increase RAM VM had 6GB ram and increased to 16GB still same error Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2354 Posted April 12, 2022 (edited) 25 minutes ago, Jeja said: VM had 6GB ram and increased to 16GB still same error OK it was a recent commit that caused this issue. It should now be fixed. Sorry for the inconvinience Edited April 12, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
Jeja Posted April 12, 2022 Share #2355 Posted April 12, 2022 5 minutes ago, pocopico said: OK it was a recent commit that caused this issue. It should now be fixed. Sorry for the inconvinience No problem ! Big thanks for the hard work Quote Link to comment Share on other sites More sharing options...
petr_z Posted April 12, 2022 Share #2356 Posted April 12, 2022 40 минут назад, Jeja сказал: VM had 6GB ram and increased to 16GB still same error increase 8gb->16gb on vm workstation 6.2 is work. 1 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted April 12, 2022 Share #2357 Posted April 12, 2022 (edited) is the two steps update procedere needed for dsm 7.1 or is there a manual for fresh install 3622xs 7.1.42661 little bit confused ? thank you very much Edited April 12, 2022 by nemesis122 Quote Link to comment Share on other sites More sharing options...
Bose321 Posted April 12, 2022 Share #2358 Posted April 12, 2022 2 hours ago, pocopico said: Oh so you are using QEMU or Proxmox ? Then USB is fine as long as it is listed correctly with fdisk -l inside DSM installation After you get this message telnet is started. You can telnet and check I'm using Unraid, which is Qemu I believe. When I run fdisk -l I don't see the USB, I only see the disk with 1 and 00 setting. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2359 Posted April 12, 2022 3 minutes ago, Bose321 said: I'm using Unraid, which is Qemu I believe. When I run fdisk -l I don't see the USB, I only see the disk with 1 and 00 setting. you should see the synoboot device. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2360 Posted April 12, 2022 11 minutes ago, nemesis122 said: is the two steps update procedere needed for dsm 7.1 or is there a manual for fresh install 3622xs 7.1.42661 little bit confused ? thank you very much Its is not required. For a fresh system you can start building 7.1.0-42661 from TC. If you have a system already running with 7.0.1 or 7.1.42621 then you can use the post update 1 Quote Link to comment Share on other sites More sharing options...
sam juan Posted April 12, 2022 Share #2361 Posted April 12, 2022 33 minutes ago, pocopico said: Its is not required. For a fresh system you can start building 7.1.0-42661 from TC. If you have a system already running with 7.0.1 or 7.1.42621 then you can use the post update it failed at 41% for me for TSU yesterday; but fine with fresh 7.0.1 first then upgraded to 7.1. will try fresh 7.1 (TSU) in another NAS box; will try it to install the pat from synology and not from the cache. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2362 Posted April 12, 2022 16 minutes ago, sam juan said: it failed at 41% for me for TSU yesterday; but fine with fresh 7.0.1 first then upgraded to 7.1. will try fresh 7.1 (TSU) in another NAS box; will try it to install the pat from synology and not from the cache. Yes it failed yesterday on a fresh install DS3622xs+ on a physical system and then i did some research and found something new and i think i've fixed that. I tried today after the new fix and it went fine. 1 Quote Link to comment Share on other sites More sharing options...
xPalito93 Posted April 12, 2022 Share #2363 Posted April 12, 2022 54 minutes ago, pocopico said: Its is not required. For a fresh system you can start building 7.1.0-42661 from TC. If you have a system already running with 7.0.1 or 7.1.42621 then you can use the post update Is this going to be the normal procedure moving forward? Like, if 7.2 comes out will we always have to do a two step update or will there be a way to update manually via the GUI without accessing TC? Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2364 Posted April 12, 2022 1 minute ago, xPalito93 said: Is this going to be the normal procedure moving forward? Like, if 7.2 comes out will we always have to do a two step update or will there be a way to update manually via the GUI without accessing TC? I'm afraid no one knows until we see it ... but TSU will most likely work 1 Quote Link to comment Share on other sites More sharing options...
petr_z Posted April 12, 2022 Share #2365 Posted April 12, 2022 (edited) 1 час назад, pocopico сказал: Its is not required. For a fresh system you can start building 7.1.0-42661 from TC. If you have a system already running with 7.0.1 or 7.1.42621 then you can use the post update Not building for fresh system from TC for for DVA3221. Edited April 12, 2022 by petr_z Quote Link to comment Share on other sites More sharing options...
petr_z Posted April 12, 2022 Share #2366 Posted April 12, 2022 Also not building with 2 step update for DVA3221, after building, reboot and install pat i'm getting this error. Quote Link to comment Share on other sites More sharing options...
cpresco Posted April 12, 2022 Share #2367 Posted April 12, 2022 @anyone I'm considering migrating from DS918+ to DS3622xs+ for various reasons and recommendations I've seen in this thread. DSM is currently at 7.0.1-42218U3. TCRP is 0.4.5. Hardware is in my sig. Are these the correct steps for migrating an existing DS918+/7.0.1-42218U3 to DS3622xs+/7.0.1-42218U3? 1. Backup all data 2. Create a new USB loader with TCRP 0.4.6 from pocopico github 3. Remove existing USB loader and boot with new USB loader 4. Select Tiny Core Image Build during boot 5. Run following commands ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh clean now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build broadwellnk-7.0.1-42218 I'm guessing that DSM will do it's own migration when I access DSM after the reboot. Once I have a successful migration to DS3622xs+/7.0.1-42218U3 I'll be considering the upgrade to DSM7.1 and am guessing that would be the two step update but I'm not sure what the sequence of events/commands would be for that. Quote Link to comment Share on other sites More sharing options...
RacerX Posted April 12, 2022 Share #2368 Posted April 12, 2022 (edited) In test When I try ./rploader.sh build broadwellnk-7.1.0-42661 I'm getting an error #] Extension redpill-boot-wait index is already up to date [#] Updating redpill-misc extension... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/r pext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################################## 100.0% [#] Extension redpill-misc index is already up to date [#] Updating redpill-misc extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_42661 platforms extensions... [-] The extension jumkey.misc was found. However, the extension index has no recipe for ds3622x sp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the curre ntly known information about [-] the extension stored locally: [#] ========================================== jumkey.misc ==================================== ====== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.jso n [#] Platforms supported: ds1621p_42218 ds3617xs_42218 ds3617xs_42550 ds918p_42550 ds3622xsp_422 18 ds3615xs_42550 ds2422p_42218 ds3622xsp_42550 ds920p_42218 ds920p_42550 ds918p_42218 ds3615xs _42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for jumkey.misc extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== jumkey.misc ==================================== ====== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.jso n [#] Platforms supported: ds1621p_42218 ds3617xs_42218 ds3617xs_42550 ds918p_42550 ds3622xsp_422 18 ds3615xs_42550 ds2422p_42218 ds3622xsp_42550 ds920p_42218 ds920p_42550 ds918p_42218 ds3615xs _42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds3622xsp_42661 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors tc@box:~$ [#] Extension redpill-misc index is already up to date [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.jso n [#] Platforms supported: ds1621p_42218 ds3617xs_42218 ds3617xs_42550 ds918p_42550 ds3622xsp_422 18 ds36 Edited April 12, 2022 by RacerX Quote Link to comment Share on other sites More sharing options...
sam juan Posted April 12, 2022 Share #2369 Posted April 12, 2022 1 hour ago, pocopico said: Yes it failed yesterday on a fresh install DS3622xs+ on a physical system and then i did some research and found something new and i think i've fixed that. I tried today after the new fix and it went fine. thanks @pocopico - it works now for me for TSU, fresh install 7.1. Quote Link to comment Share on other sites More sharing options...
MSXGames Posted April 12, 2022 Share #2370 Posted April 12, 2022 10 hours ago, Alekc said: Hello! Thank you @pocopico for hard work! I've got baremetal installation with 918+. After update form 7.01 to 7.1 application center have no internet connection and I can't install any apps. Somebody know something about it? Check if yout ime setting are okay. I had this issue once, when done a time setting all was fine. You can use the sync button. Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 12, 2022 Share #2371 Posted April 12, 2022 26 minutes ago, RacerX said: In test When I try ./rploader.sh build broadwellnk-7.1.0-42661 I'm getting an error #] Extension redpill-boot-wait index is already up to date [#] Updating redpill-misc extension... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/r pext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################################## 100.0% [#] Extension redpill-misc index is already up to date [#] Updating redpill-misc extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_42661 platforms extensions... [-] The extension jumkey.misc was found. However, the extension index has no recipe for ds3622x sp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the curre ntly known information about [-] the extension stored locally: [#] ========================================== jumkey.misc ==================================== ====== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.jso n [#] Platforms supported: ds1621p_42218 ds3617xs_42218 ds3617xs_42550 ds918p_42550 ds3622xsp_422 18 ds3615xs_42550 ds2422p_42218 ds3622xsp_42550 ds920p_42218 ds920p_42550 ds918p_42218 ds3615xs _42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for jumkey.misc extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== jumkey.misc ==================================== ====== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.jso n [#] Platforms supported: ds1621p_42218 ds3617xs_42218 ds3617xs_42550 ds918p_42550 ds3622xsp_422 18 ds3615xs_42550 ds2422p_42218 ds3622xsp_42550 ds920p_42218 ds920p_42550 ds918p_42218 ds3615xs _42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds3622xsp_42661 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors tc@box:~$ [#] Extension redpill-misc index is already up to date [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.jso n [#] Platforms supported: ds1621p_42218 ds3617xs_42218 ds3617xs_42550 ds918p_42550 ds3622xsp_422 18 ds36 Use the following command to add the redpill-misc extension: ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json 1 Quote Link to comment Share on other sites More sharing options...
RacerX Posted April 12, 2022 Share #2372 Posted April 12, 2022 (edited) In test Before I posted the last message I ran this and then I encountered the error it' new I haven't seen this before..... ./rploader.sh download broadwellnk-7.1.0-42661 ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 I tryed it with /rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json Works fine build is clean Thanks Edited April 12, 2022 by RacerX Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2373 Posted April 12, 2022 (edited) 3 hours ago, petr_z said: Also not building with 2 step update for DVA3221, after building, reboot and install pat i'm getting this error. if you don’t have nvidia GPU you have to comment out some files. Also if you run this on older CPU there is another thing you need to comment Edited April 12, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
ulissessantos Posted April 12, 2022 Share #2374 Posted April 12, 2022 18 minutes ago, pocopico said: if you don’t have nvidia GPU you have to comment out some files. Also if you run this on older CPU there is another thing you need to comment Please, which files? I MY PC is HP DC7900, Intel Quad Core 2 q9550 2,83 GHz 12m/lga775, 8 gb Quote Link to comment Share on other sites More sharing options...
OUTSIDE Posted April 12, 2022 Share #2375 Posted April 12, 2022 9 hours ago, pocopico said: fixed. how? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.