pocopico Posted April 10, 2022 Author Share #2226 Posted April 10, 2022 5 minutes ago, ditheo said: I tried to upgrade a proxmox ds3622xs+ first with postupgrade , then the second method with fullupgrade from @Peter Suh post. Both of them seems to install fine but After about 2 minutes the vm shutdown itself with the this Stopped Check malware and execute rc.local What i did wrong? You need the redpill-misc extension. If you have serial or ssh connection to the DSM you can edit manually : /lib/modules-load.d/70-cpufreq-kernel.conf and comment or remove the line that start with acpi 2 Quote Link to comment Share on other sites More sharing options...
Kaneske Posted April 10, 2022 Share #2227 Posted April 10, 2022 @pocopico maybe you can help me before I have to wipe my whole system. My Installation is very strange after updating to official 7.1 The Storage Manager is missing i can’t create users. System doesnt Show Serial Number…SSH is Not activateable… Maybe i have to reinstall because of corrupt Installation of the Update… maybe a known issue…? Quote Link to comment Share on other sites More sharing options...
Badger Posted April 10, 2022 Share #2228 Posted April 10, 2022 Well I successfully migrated from 6.2 to 7.0. Then tried to go to 7.1. I used both the postupdate method and the "two step" method, but neither worked. The 'two step" method got pretty far, but the system shut down/crashed as the install was just finishing. I tried 3 or 4 times. Question is... if I go back to 7.0.1 or 6.2.3... is it true I will have to wipe my disks, because the migration to 7.0.1 was successful? I'm afraid that perhaps even a 7.0.1 loader won't work because the 7.1 install ran on for about 9 minutes before crashing. Please advise. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2229 Posted April 10, 2022 1 minute ago, Badger said: Well I successfully migrated from 6.2 to 7.0. Then tried to go to 7.1. I used both the postupdate method and the "two step" method, but neither worked. The 'two step" method got pretty far, but the system shut down/crashed as the install was just finishing. I tried 3 or 4 times. Question is... if I go back to 7.0.1 or 6.2.3... is it true I will have to wipe my disks, because the migration to 7.0.1 was successful? I'm afraid that perhaps even a 7.0.1 loader won't work because the 7.1 install ran on for about 9 minutes before crashing. Please advise. See my previous post Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2230 Posted April 10, 2022 33 minutes ago, Kaneske said: @pocopico maybe you can help me before I have to wipe my whole system. My Installation is very strange after updating to official 7.1 The Storage Manager is missing i can’t create users. System doesnt Show Serial Number…SSH is Not activateable… Maybe i have to reinstall because of corrupt Installation of the Update… maybe a known issue…? That is indeed strange. What is the platform you are using ? Quote Link to comment Share on other sites More sharing options...
Kaneske Posted April 10, 2022 Share #2231 Posted April 10, 2022 (edited) 3622xs+ worked flawlessly wit RC 7.1 Now I can only access my Data, copying meanwhile. But the whole OS look borked. Basics missing and functions won’t activate. Reinstall possible? Edited April 10, 2022 by Kaneske Quote Link to comment Share on other sites More sharing options...
Badger Posted April 10, 2022 Share #2232 Posted April 10, 2022 33 minutes ago, pocopico said: See my previous post Assuming you meant your previous post where you advised leaving disks as is..... So I created a 3622xs+ 7.0.1-4etc loader from scratch using this guide ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb DS3622xs+ ./rploader.sh satamap now ./rploader.sh backup now ./rploader.sh build broadwellnk-7.0.1-42218 Boots... then the installer won't allow the 7.0.1 .pat file. Specifies 7.1 42661 or later. So I download and click next. Tries to migrate.... reboots. Then says recover. Proceeded with recover for about 15 minutes, the comes back to "recoverable" in assistant. Somehow I don't think it is recoverable? Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 10, 2022 Share #2233 Posted April 10, 2022 6 hours ago, RedCat said: I can fix the 2% problem. But if i try upgrade 6.2.3 to 7.0.1 on proxmox, then the upgrade stop at 70%. If i try 6.2.3 to 6.2.4, then it go to 100%, and restart the VM. I install rp 6.2.4 loader on VM, but dont boot the xpenology... Help me pls I don't know how, I am sorry. I have personally done migrations on real synology hardware (dsm624 to dsm701), it just simply works. My limited time with xpenology has had the same results... once you get the rp build right it just works... If you are testing using a completely different vm as I suggested, at least you know you can always continue to keep your work dsm623 without fear of data loss, at least until you resolve the issue or someone else chimes in. Someone with more experience will have to inject some suggestion. I will restate again, using a test vm I cant see why a direct upgrade from dsm623, to dsm701 (easier) using official pat, inside dsm, then on the required reboot, load your test vm with the working proper rp701 loader and it should boot right into dsm701. Others have done the same thing. Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 10, 2022 Share #2234 Posted April 10, 2022 19 minutes ago, Badger said: Assuming you meant your previous post where you advised leaving disks as is..... So I created a 3622xs+ 7.0.1-4etc loader from scratch using this guide ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb DS3622xs+ ./rploader.sh satamap now ./rploader.sh backup now ./rploader.sh build broadwellnk-7.0.1-42218 Boots... then the installer won't allow the 7.0.1 .pat file. Specifies 7.1 42661 or later. So I download and click next. Tries to migrate.... reboots. Then says recover. Proceeded with recover for about 15 minutes, the comes back to "recoverable" in assistant. Somehow I don't think it is recoverable? I think he meant to comment out the acpi lines Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 10, 2022 Share #2235 Posted April 10, 2022 (edited) 6 hours ago, IG-88 said: drivers are not one big package that is all present in rp loader, every driver is a single extension that needs to be added, in your case r8152 it look like as if the driver is not present/loaded in 7.x (lsusb only shows the hardware but no loaded driver for it) if the extension is not added then it needs to be added manually to the loader I have tried to add the r8152 driver during the build process, but everytime it gives a red error that the package is already added and the process will end (or something to that effect) either I am not doing it right, or something... ? Is there a way to force add it on a working system like with postupdate or something? What would be the correct syntax ? Edited April 10, 2022 by phone guy Quote Link to comment Share on other sites More sharing options...
Doud Posted April 10, 2022 Share #2236 Posted April 10, 2022 Il y a 1 heure, pocopico a dit : Increase RAM size on the VM. Tinycore uses about 80% of the RAM size for its root partition. On usb stick of 8Gb sde3 is only 800Mb... With Mini Partition tool free you can easely up size of sde3 because when the img is write on your stick you have lot of free space analoued 1 Quote Link to comment Share on other sites More sharing options...
cferra Posted April 10, 2022 Share #2237 Posted April 10, 2022 (edited) 7 minutes ago, Doud said: On usb stick of 8Gb sde3 is only 800Mb... With Mini Partition tool free you can easely up size of sde3 because when the img is write on your stick you have lot of free space analoued TC extracts to ram every time it boots so some partitions are based on the ram size and not based on the usb stick that the image is on. Edited April 10, 2022 by cferra Quote Link to comment Share on other sites More sharing options...
Badger Posted April 10, 2022 Share #2238 Posted April 10, 2022 14 minutes ago, phone guy said: I think he meant to comment out the acpi lines Oh... OK. So I'll go back and create a loader for 7.1 via the "two step" process. Then boot... ssh in and comment out the acpi lines. I'll give it a try. thanks. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2239 Posted April 10, 2022 1 hour ago, Kaneske said: 3622xs+ worked flawlessly wit RC 7.1 Now I can only access my Data, copying meanwhile. But the whole OS look borked. Basics missing and functions won’t activate. Reinstall possible? Sure. Its possible to force re-install. While at GRUB , in the linux line you can add force_junior at the end of the line. Then you will end up in DSM GUI to reinstall. 4 Quote Link to comment Share on other sites More sharing options...
Kaneske Posted April 10, 2022 Share #2240 Posted April 10, 2022 Oh cool option @pocopico I will see if I can find it… Is it like pressing Spacebar or so as Hackintosh Loader behave like or how do I get to these Boot-Args? Quote Link to comment Share on other sites More sharing options...
ditheo Posted April 10, 2022 Share #2241 Posted April 10, 2022 2 hours ago, pocopico said: You need the redpill-misc extension. If you have serial or ssh connection to the DSM you can edit manually : /lib/modules-load.d/70-cpufreq-kernel.conf and comment or remove the line that start with acpi I have added the Redhill misc ext already and I check that was commented out already. I found that the shutdown process run when I try to reach the web page Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2242 Posted April 10, 2022 19 minutes ago, Kaneske said: Oh cool option @pocopico I will see if I can find it… Is it like pressing Spacebar or so as Hackintosh Loader behave like or how do I get to these Boot-Args? You press e while at GRUB then you move the cursor to the Linux line you hit end to go toe the end of line, you add the force_junior and you press F10 its a sync feature, probably there to force recovery Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2243 Posted April 10, 2022 10 minutes ago, ditheo said: I have added the Redhill misc ext already and I check that was commented out already. I found that the shutdown process run when I try to reach the web page Then you have another prerequisite process that fails at boot. You can check and fix accordingly, with systemctl list-units --failed Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 10, 2022 Share #2244 Posted April 10, 2022 1 hour ago, phone guy said: I have tried to add the r8152 driver during the build process, but everytime it gives a red error that the package is already added and the process will end (or something to that effect) either I am not doing it right, or something... ? Is there a way to force add it on a working system like with postupdate or something? What would be the correct syntax ? i'd say check the result, if its already installed then after finishing with tinycore the custom.gz (1st partiton of the loader) should contain the extension and if thats ok start dsm and ckeck if the driver is present and check the log about the driver (maybe is trying to load but there is a error), if the driver is present you can also try to load it with insmod and check the result in the log and with lsusb Quote Link to comment Share on other sites More sharing options...
loveburn Posted April 10, 2022 Share #2245 Posted April 10, 2022 (edited) Guys, today all integrated Intel NICs are supported in DSM? I mean 219V for example... In Asus ROG b360-i gaming built-in i219v... Nic I want to use 7.1 on baremetal config Edited April 10, 2022 by loveburn Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 10, 2022 Share #2246 Posted April 10, 2022 42 minutes ago, loveburn said: Guys, today all integrated Intel NICs are supported in DSM? there is definitely no support for intel 2.5G nic (driver "igc") because its only supported in kernel 5.x and synology uses 4.x (intel does not support older kernels with a driver) 1G and 10 G should work in general and if not it should be possible to make newer driver from here https://sourceforge.net/projects/e1000/files/ 1 Quote Link to comment Share on other sites More sharing options...
RacerX Posted April 10, 2022 Share #2247 Posted April 10, 2022 (edited) Ok I kicked off a test just now for DS918+ ixgbevf The script runs fine but it doesn't find an ip when I reboot. I examined the results sudo ./rploader.sh build apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbevf/rpext-index.json when the script loads the extension [#] Extension name: ixgbe [#] Description: Adds Intel(R) 10GbE PCI Express Linux Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/ixgb e [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/r pext-index.json is this the correct extension for version ixgbevf? on github it shows "id": "pocopico.ixgbevf", "url": "https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbevf/rpext-index.json", "info": { "name": "ixgbevf", "description": "Adds Intel(R) 10 Gigabit Virtual Function Network Driver Support", "author_url": "https://github.com/pocopico", "packer_url": "https://github.com/pocopico/rp-ext/tree/main/ixgbevf", "help_url": "<todo>" This show Vitual but I'm testing bare metal .... Edited April 10, 2022 by RacerX Quote Link to comment Share on other sites More sharing options...
loveburn Posted April 10, 2022 Share #2248 Posted April 10, 2022 12 минуты назад, IG-88 сказал: there is definitely no support for intel 2.5G nic (driver "igc") because its only supported in kernel 5.x and synology uses 4.x (intel does not support older kernels with a driver) 1G and 10 G should work in general and if not it should be possible to make newer driver from here https://sourceforge.net/projects/e1000/files/ When I tried install dsm 6.2.3 u3 via juns 1.04 loader, integrated i219v not be working...., It's work after using your extra lzma build... But in my ASRock z370m itx-ac with built-in 2 nic (i219v and 211t) two nic worked from the box.... I don't know why))) but in Asus I must be use your extra lzma pack) Quote Link to comment Share on other sites More sharing options...
ditheo Posted April 10, 2022 Share #2249 Posted April 10, 2022 1 hour ago, pocopico said: Then you have another prerequisite process that fails at boot. You can check and fix accordingly, with systemctl list-units --failed The units that are failed is Postgresql Synomount usb fs Synoindex check package service Synoinit eth System modules load service Also after the first build of 42218 version when I clean the files the user-config.json is also reset to default. (But it does not affect the rest process, I re-run the serial Gen command and it holds the new serial) I tried to run with usb option and it fails on 55% , I have to compile again with other sata options Quote Link to comment Share on other sites More sharing options...
Ylamarche5382 Posted April 11, 2022 Share #2250 Posted April 11, 2022 Finally I managed to do the update, I had to change the option "support_disk_compatibility" 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.