Aigor

We are in english part of forum so i can answer in english Simple, use osfmount to open synoboot.img, delete old extra.lzma, put on it new extra.lzma downloaded according to pat file, for ds3615 you have to use first link, for ds3617, you have to use second link. If you dont know how to use osfmount or others tools, check on google, the uses of the tools is beyond the scope of the forum.

It's simple, you need to swap original extra.lzma into synoboot.img 1.03b with those based on your pat file For DS3615 http://s000.tinyupload.com/?file_id=04147311964729253115 For DS3617 http://s000.tinyupload.com/?file_id=00282289527307524672

As title, successfull fresh installation with loader 1.03b patfile DS3617_xs-6.2.3-25426 and extra.lzma for loader 1.03b ds3617 DSM 6.2.3 v0.11.1_test without any other network card except Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) used only for ISCSI

@Red100 have you checked correct vid and pid of grub.conf into usb stick? Maybe could be the cause of error

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-update4 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: Yes - Installation type: BAREMETAL - HP Gen8 Microserver Additional comments:

Hi Folks, as Title, are they released source and toolchain for last DSM version? many thanks P.S. sorry for possible wrong section, i don't know in which section ask something like this

Onboard nic not workig why? There isn't any driver in boot image or what? If we have kernel source we can compile HP driver and add this into bootimage

Probabilmente il controller dei dischi non è compreso nel bootloader, per ovviare al problema devi usare un loader meno recente con un DSM meno recente Oppure, aggiungere il driver del tuo controller nell'immagine di boot,fattibile, ma devi avere un po di conoscenza in linux

Hi, have you did some tweaking to install into N40L? some bios settings or similar, i wasn't able to fresh install into N40L Many thanks

Waiting dev answer , the ideam comes in my mind because i patch DSDT for hackintosh too and i wrote a howto use ozmosis into bios

Sorry for posting in wrong section

Hi, i apologize for my strange post How it works original synology hardware? They wrote a special bios in which rename the hardware like they want? If so, could be possible do the same in regular bios? As far i know device naming i doing via DSDT that is readable , so, if we take original synology DSDT we can compare with a standard DSDT and, we can try to tweak DSDT of standard bios to reflect synology device naming i'm writing a bullshit or there is something logical? many thanks

Hi, if you want add FC support to Synology, you have to look into SCST it's' noy enough add QLA driver.

Se non hai bisogno delle features della 6 e della 6.1 rimani con quella che funziona, la 6.1 introduce l'active directory ed altre cose rivolte più al mondo PMI che quello home, per cui, se non ti servono, non ha senso aggiornare xpenology

Jun use vanilla synology source, if you dig into boot image you can see modprobe command, i suspect to be the part in which Jun have worked, so is enough , i have to do some experiment

What is Default Synology repo? what do you looking for?

Hi, nice How-to, do you think i can swap Bzimage too? I'm in writing another howto but without using Xpenology box as devel machine, i have already setup a devel machine in which i can compile drivers, so i would like to use it instead of DSM

No, is a option not compiled in kernel, you ned to recompile kernel with this option ON in configuration

yes, me, check DNS log to see if there are some syntax errors on zone Files

Ti ringrazio, il bootloader 1.02 Alpha, occhio che è in alpha stage, quindi non è sicuro al 100% che non dia problemi. Io sono ancora su DSM 6.0 per ora non mi occorrono le nuove caratteristiche del 6.1

DON'T USE QUICKCONNECT! It's more simple use DDNS and port address translation into router. Synology allow to use QC with their original product, still try to use QC and Synology can ban forum.

I wrote some howtos but before to write i must prove that they work. When i'll be able to understand and to play with Jun's script i will write it

Can You write a sort of howto? i think will be usefull

i tried to add modprobe source into tool folder, but i get an error about some bad compilation flag and yes, i'v done ./config --prefix /usr/sbin to generate correct Makefile But i think we can jump compilation of modprobe and simply copy one extracted from running synology or jump the whole "modprobe" step I'v read why Jun want compile mdprobe, but if we can use one from image file, compilation of it is useless.