Fabry815 Posted June 23, 2018 Share #26 Posted June 23, 2018 Hi, do you plan to create the loader for DSM 6.2 with MBR partition table? Quote Link to comment Share on other sites More sharing options...
oleger Posted August 9, 2018 Share #27 Posted August 9, 2018 (edited) Hey. M/b GA-G31M-ES2L (Rev. 2.x), NC ar8131 chip, the DSM 6.x.x Loader (with MBR partition Table) - does not see the network adapter, apparently there is no driver. Is there any way to add it? Sorry for the stupid question, thanks Edited August 9, 2018 by oleger Quote Link to comment Share on other sites More sharing options...
wimmetje Posted August 11, 2018 Share #28 Posted August 11, 2018 (edited) 1.03b loader MBR version https://mega.nz/#!3JVEGS6A!ZFaRX9wPyBVgY5H35DR5IvLij5o_m09ZmkngZaRSW5A I converted it to, tested it with a fresh installation of DSM 6.2 and worked. Edited August 11, 2018 by wimmetje 1 Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted August 14, 2018 Share #29 Posted August 14, 2018 On 8/12/2018 at 4:53 AM, wimmetje said: 1.03b loader MBR version https://mega.nz/#!3JVEGS6A!ZFaRX9wPyBVgY5H35DR5IvLij5o_m09ZmkngZaRSW5A I converted it to, tested it with a fresh installation of DSM 6.2 and worked. You mean you took Genesis loader and removed the appropriate files and added the new loader and files? Quote Link to comment Share on other sites More sharing options...
wimmetje Posted August 14, 2018 Share #30 Posted August 14, 2018 (edited) 1 hour ago, Polanskiman said: You mean you took Genesis loader and removed the appropriate files and added the new loader and files? Hi, Sort of, I mounted both partition of the 1.02 Genesis loader (MBR) in OSFmount. Then I took the 1.03 loader mounted both partition also in OSFmount, and copied the files over to the 1.02b Genesis. It works great, just installed a fresh DSM 6.2. (bare metal) And also updated to the new update. Edited August 14, 2018 by wimmetje 1 1 Quote Link to comment Share on other sites More sharing options...
Fabry815 Posted August 17, 2018 Share #31 Posted August 17, 2018 (edited) hi, i've trouble with the network card. the nas is not visible on the lan there is any way to add the drivers present in the old loader? the Intel PRO/1000 is misisng Thanks Edited August 17, 2018 by Fabry815 Quote Link to comment Share on other sites More sharing options...
croustx Posted September 15, 2018 Share #32 Posted September 15, 2018 (edited) Same issue here. Got 3 network cards. None is working. Edit : Grub cannot load the kernel with that version Edited September 15, 2018 by croustx Quote Link to comment Share on other sites More sharing options...
Rezdbic Posted September 24, 2018 Share #33 Posted September 24, 2018 Waiting for Genesys and his 1.03b MBR loader... Quote Link to comment Share on other sites More sharing options...
e2950 Posted October 28, 2018 Share #34 Posted October 28, 2018 is there anyway someone could make and update 1.03b mbr loaded. that would be awesome. Quote Link to comment Share on other sites More sharing options...
espetoet Posted October 29, 2018 Share #35 Posted October 29, 2018 Good Morning! Has anyone done loader 1.04b mbr? Quote Link to comment Share on other sites More sharing options...
e2950 Posted October 30, 2018 Share #36 Posted October 30, 2018 it seems all interest in mbr has been lost 1 Quote Link to comment Share on other sites More sharing options...
Fabry815 Posted November 22, 2018 Share #37 Posted November 22, 2018 Hi, someone able to convert the loader 1.04b with MBR? or if someone have the procedure to create i will create Quote Link to comment Share on other sites More sharing options...
Fabry815 Posted November 22, 2018 Share #38 Posted November 22, 2018 On 8/11/2018 at 11:53 PM, wimmetje said: 1.03b loader MBR version https://mega.nz/#!3JVEGS6A!ZFaRX9wPyBVgY5H35DR5IvLij5o_m09ZmkngZaRSW5A I converted it to, tested it with a fresh installation of DSM 6.2 and worked. Hi, you are able to convert the last loader availlable 1.04b Quote Link to comment Share on other sites More sharing options...
ideasman69 Posted November 22, 2018 Share #39 Posted November 22, 2018 (edited) 1 hour ago, Fabry815 said: Hi, you are able to convert the last loader availlable 1.04b why do you need an MBR version of this loader? It only works on 4th gen intel Core processors (and newer) anyway - and surely they all have UEFI BIOSs. I'm using the current loader in CSM / BIOS mode and it works fine Edited November 22, 2018 by ideasman69 Quote Link to comment Share on other sites More sharing options...
Rezdbic Posted December 4, 2018 Share #40 Posted December 4, 2018 В 23.11.2018 в 00:37, ideasman69 сказал: why do you need an MBR version of this loader? Old mb can't load from gpt partition - that's the point. Quote Link to comment Share on other sites More sharing options...
ideasman69 Posted December 4, 2018 Share #41 Posted December 4, 2018 2 hours ago, Rezdbic said: Old mb can't load from gpt partition - that's the point. Ok, but the 1.04b loader only works on Haswell CPUs or above. Any Haswell (or above) motherboards will boot from it without any modification. That was my point Quote Link to comment Share on other sites More sharing options...
Rezdbic Posted December 5, 2018 Share #42 Posted December 5, 2018 23 часа назад, ideasman69 сказал: but the 1.04b loader only works on Haswell CPUs or above Is It means what 1.04 loader would not work on Sandy Bridge? Quote Link to comment Share on other sites More sharing options...
ideasman69 Posted December 5, 2018 Share #43 Posted December 5, 2018 2 hours ago, Rezdbic said: Is It means what 1.04 loader would not work on Sandy Bridge? 2 Quote Link to comment Share on other sites More sharing options...
JoFer Posted February 19, 2019 Share #44 Posted February 19, 2019 On 8/11/2018 at 11:53 PM, wimmetje said: 1.03b loader MBR version https://mega.nz/#!3JVEGS6A!ZFaRX9wPyBVgY5H35DR5IvLij5o_m09ZmkngZaRSW5A I converted it to, tested it with a fresh installation of DSM 6.2 and worked. Thanks worked Quote Link to comment Share on other sites More sharing options...
keteflips Posted June 12, 2019 Share #45 Posted June 12, 2019 On 8/11/2018 at 11:53 PM, wimmetje said: 1.03b loader MBR version https://mega.nz/#!3JVEGS6A!ZFaRX9wPyBVgY5H35DR5IvLij5o_m09ZmkngZaRSW5A I converted it to, tested it with a fresh installation of DSM 6.2 and worked. Dude, give me your paypal I will pay you a beer You saved my life. Quote Link to comment Share on other sites More sharing options...
S__M Posted September 10, 2019 Share #46 Posted September 10, 2019 Hi. 1.03b not work with my board... Gigabyte Ga-x58a-ud7. DSM 4.2 worked good. Are there any options to run it 6 version? Quote Link to comment Share on other sites More sharing options...
norman Posted November 10, 2019 Share #47 Posted November 10, 2019 On 1/24/2018 at 8:14 PM, IG-88 said: hi, i found something old about "older" hp systems interestingly i have a dc7600 cmt for tests and this system boots with genesys's mbr loader a dc7800p ultra slim does not could you fix this problem ? i have a dc7800 sff here, and have the same problem. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted November 10, 2019 Share #48 Posted November 10, 2019 no, i never looked deeper into this, was just for documentation, i dont have this 7800 anymore, such sff was just to limited by hardware even for testing Quote Link to comment Share on other sites More sharing options...
dmxpe Posted August 4, 2020 Share #49 Posted August 4, 2020 (edited) hallo All Users a use DSM 6.1JunsMod for DS3615xs - Loader Version 1.02b (MBR Partition Table) work Very Good DS3615xs DSM 6.1 and upgrade DS3615xs 6.1 update 3 ok my intel atom d945gclf2 motherboard ( HDD IDE Work Very Good ) my problem: upgrade DS3615xs - DSM 6.2xx or boot a loader DS3615xs_V1.03b_MBR_Zandstraal.img ( network not found not even for an installation without a system (fresh install)) ( how to work a DSM 6.2xx in the intel atom d945gclf2 motherboard ? ) Plese help me! , Tanks How To Debug and Find The problem ? Edited August 4, 2020 by dmxpe Quote Link to comment Share on other sites More sharing options...
amnher Posted August 7, 2020 Share #50 Posted August 7, 2020 On 8/12/2018 at 5:53 AM, wimmetje said: 1.03b loader MBR version https://mega.nz/#!3JVEGS6A!ZFaRX9wPyBVgY5H35DR5IvLij5o_m09ZmkngZaRSW5A I converted it to, tested it with a fresh installation of DSM 6.2 and worked. Working on genesys mbr 6.1 but using your loader shows no hard drive. I dont have AHCI mode Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.