rojoone2 Posted November 18, 2022 Share #1251 Posted November 18, 2022 17 minutes ago, J3d1UK said: Can anyone help me with a problem please? Baremetal Install - HP DL380 Gen9 12 x LFF Bays / P840ar Card in HBA mode / E5-2640 v4 / 32GB RAM Image used: DS3622xs (have also tried 3615, 3617 with the same result) Followed the guide through, I get to install the .pat file, fails at 69-72% - Drives appear to be showing, however if i retry, fails at 0% (almost like the p840ar is crashing) I CAN get this to work if i put the P840ar card into RAID mode, create a new raid for EVERY drive to a RAID 0 seperately - however this then doesn't forward any smart data etc to DSM - but does allow me to install correctly and get up and running - I'd like to get this working as I would like to get rid of the Microserver gen8 its currently on (I want more drive bays) I believe that card needs a driver to be added. Have you tried adding the "hpsa" driver before you built the loader? 1 Quote Link to comment Share on other sites More sharing options...
J3d1UK Posted November 18, 2022 Share #1252 Posted November 18, 2022 12 minutes ago, rojoone2 said: I believe that card needs a driver to be added. Have you tried adding the "hpsa" driver before you built the loader? It appears in the modules list when i first boot to configure the loader, I was under the impression it loaded the modules automatically as I have not manually selected any of them (and when card is in RAID mode instead of HBA - installs fine? - I just REALLY need it to be in HBA mode before I can switch all my data over!) Quote Link to comment Share on other sites More sharing options...
SWAGG3R Posted November 19, 2022 Share #1253 Posted November 19, 2022 if i have installed on VM 0.7 7.1.1 need download or 1.0 vmdk dyn or flat? Quote Link to comment Share on other sites More sharing options...
Orphée Posted November 19, 2022 Share #1254 Posted November 19, 2022 6 hours ago, SWAGG3R said: if i have installed on VM 0.7 7.1.1 need download or 1.0 vmdk dyn or flat? Flat is for ESXi. Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted November 19, 2022 Share #1255 Posted November 19, 2022 Has anyone got this working on amd mainly am4 ryzen 7 trying to get my mates setup for him and just having no joy tried different earthnet modules still loses connection or gets stuck on constantly rebooting Quote Link to comment Share on other sites More sharing options...
J3d1UK Posted November 19, 2022 Share #1256 Posted November 19, 2022 21 hours ago, rojoone2 said: I believe that card needs a driver to be added. Have you tried adding the "hpsa" driver before you built the loader? Yep, just done it manually too - same problem... Quote Link to comment Share on other sites More sharing options...
SWAGG3R Posted November 19, 2022 Share #1257 Posted November 19, 2022 12 часа назад, Orphée сказал: Flat is for ESXi. dyn for what? Quote Link to comment Share on other sites More sharing options...
SWAGG3R Posted November 19, 2022 Share #1258 Posted November 19, 2022 (edited) After creating and launching the bootloader, it does not enter the IP address, it does not appear in find synolgy and synology assistant either. 1.0 Beta3, DS3622xs+ 7.1-42661 create, DS920 same issue Intall on virtualbox Edited November 20, 2022 by SWAGG3R Quote Link to comment Share on other sites More sharing options...
smilenkovski Posted November 20, 2022 Share #1259 Posted November 20, 2022 @fbelavenuto I saw on your github that You added i915 addons two days ago. Does that mean that are drivers for enabling hw transcoding on newer gen of cpu's? I have 10th gen i3. Quote Link to comment Share on other sites More sharing options...
vizkoze Posted November 20, 2022 Share #1260 Posted November 20, 2022 On 11/6/2022 at 11:57 AM, Aleks said: The acpid button will work when calling shutdown from the proxmox console if in the VM settings QEMU Guest Agent = disable I tried that but that didn't work for me. in the vm settings, ACPI support = yes KVM hardware virtualisation = yes Qemu guest Agent = false qm shutdown 101 (= my vmid) returns shutdown timeout qm stop 101 is ok but i get System booted up from an improper shutdown. in my logs. even tried qm shutdown 101 --timeout 90 but didn't work either. Quote Link to comment Share on other sites More sharing options...
Aleks Posted November 21, 2022 Share #1261 Posted November 21, 2022 (edited) On 11/20/2022 at 5:18 PM, vizkoze said: I tried that but that didn't work for me. in the vm settings, ACPI support = yes KVM hardware virtualisation = yes Qemu guest Agent = false qm shutdown 101 (= my vmid) returns shutdown timeout qm stop 101 is ok but i get System booted up from an improper shutdown. in my logs. even tried qm shutdown 101 --timeout 90 but didn't work either. hi my configuration (there are several of them) pve 7.2-14 arpl-v1.0-beta3 DS3622xs+ DSM 7.1.1-42962 Update 2 vm settings OS Type = Linux 5.x - 2.6 Kernel ACPI support = Yes KVM hardware virtualisation = Yes Qemu Guest Agent = Disable vm hardware Processor = kvm64 BIOS = Default (SeaBIOS) Machine = Default (i440fx) SCSI Controller = VirtIO SCSI HARD Disks = sata (0-5) qm shutdown 101 (= my vmid too ) returns normal shutdown Edited November 21, 2022 by Aleks Quote Link to comment Share on other sites More sharing options...
Smartpol Posted November 21, 2022 Share #1262 Posted November 21, 2022 33 минуты назад, Aleks сказал: qm shutdown 101 (= my vmid too ) returns normal shutdown Shutdown start to work after first reboot of xpenology vm in proxmox, as I remember. I also use xpenology in proxmox, but my hardware configuration slightly differs: q35 chipset and e1000 network (virtio net slow down network transfer speed) with DS920+ at 7.1.1-42962 u2. Quote Link to comment Share on other sites More sharing options...
hiritsuki Posted November 21, 2022 Share #1263 Posted November 21, 2022 z77 Mpower es 2.2Ghz unlocked 4c8t (same as i7-3770K) from jun's 3617xs 6.2.3-25426 Update 3 upgrade to 3622xs+ 7.1.1-42962 Update 2 successful Quote Link to comment Share on other sites More sharing options...
artzavod Posted November 21, 2022 Share #1264 Posted November 21, 2022 Hello! I have a problem. I create USB boot flash (with arpl-1.0-beta3.img) and select it in boot devices in bios. After boot I see that. Whats wrong? Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted November 21, 2022 Share #1265 Posted November 21, 2022 (edited) Is your boot options set to legacy boot or UEFI? Edited November 21, 2022 by rojoone2 Quote Link to comment Share on other sites More sharing options...
Green Posted November 21, 2022 Share #1266 Posted November 21, 2022 1 hour ago, artzavod said: Hello! I have a problem. I create USB boot flash (with arpl-1.0-beta3.img) and select it in boot devices in bios. After boot I see that. Whats wrong? Did you use Rufus - Create bootable USB drives the easy way or balenaEtcher - Flash OS images to SD cards & USB drives to prepare the Boot USB ? Quote Link to comment Share on other sites More sharing options...
artzavod Posted November 21, 2022 Share #1267 Posted November 21, 2022 1 hour ago, Green said: Did you use Rufus - Create bootable USB drives the easy way or balenaEtcher - Flash OS images to SD cards & USB drives to prepare the Boot USB ? I'm using rufus Quote Link to comment Share on other sites More sharing options...
artzavod Posted November 21, 2022 Share #1268 Posted November 21, 2022 1 hour ago, rojoone2 said: Is your boot options set to legacy boot or UEFI? Where i can find this options to check? Quote Link to comment Share on other sites More sharing options...
Green Posted November 22, 2022 Share #1269 Posted November 22, 2022 His screenshot is set to legacy boot. So I am not sure what is wrong. I would just start over. Quote Link to comment Share on other sites More sharing options...
Andy Miller Posted November 22, 2022 Share #1270 Posted November 22, 2022 Does someone have a guide for spinning this up on esxi?? Ive been trying for several hours using the arpl flat files and converting using vmkfstools and whenever i try to add the converted file it never reads any size on the volume or allows me to allocate it to a controller. Im sure it shouldnt be this difficult. if someone could provide a link for a working converted vmdk or a guide to the process it would be appreciated. Quote Link to comment Share on other sites More sharing options...
Orphée Posted November 22, 2022 Share #1271 Posted November 22, 2022 The files provided in the flat archive work as is. There is absolutly nothing to convert. You put the 2 files from it in your datastore and voilà. 2 Quote Link to comment Share on other sites More sharing options...
artzavod Posted November 22, 2022 Share #1272 Posted November 22, 2022 11 hours ago, Green said: His screenshot is set to legacy boot. So I am not sure what is wrong. I would just start over. Yes! I'm using arpl-1.0-beta3.img.zip 1 Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted November 22, 2022 Share #1273 Posted November 22, 2022 13 hours ago, artzavod said: Where i can find this options to check? In your bios look for boot options.. What is your motherboard and CPU? Quote Link to comment Share on other sites More sharing options...
artzavod Posted November 22, 2022 Share #1274 Posted November 22, 2022 2 hours ago, rojoone2 said: In your bios look for boot options.. What is your motherboard and CPU? MSI h510i pro wifi + i3 10105 Quote Link to comment Share on other sites More sharing options...
-iliya- Posted November 22, 2022 Share #1275 Posted November 22, 2022 today try to use ARPS 1.0-beta3 after create loader and install and boot to DSM try to select Reinstall DSM in boot menu but always booting as normal boot DSM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.