dimakv2014 Posted April 9, 2023 Share #676 Posted April 9, 2023 (edited) 25 minutes ago, Orphée said: Honestly I was able to recompile i915 module with just added missing 3E98 for my case. It worked and module was loaded. I was able to HW transcode, but still, Surveillance Station AI was crashing. I think it is not just a missing module issue, but also inside some Surveillance Station DLLs ... Synology is known for making double checks in both .pat and .spk for ss, so yes you are correct its not just driver change in dsm required its surveillance station which gives headache as well. If face rec for example needed in pictures modifying driver would be enough but new versions of SS .spk are encrypted so there is no way to modify. Edit: its possible to modify SS files in place using root but it requires reverse engineering and we must know where to search but still it wont be possible to create modified ss.spk I remember we tried to modify SS version 8.2.9 long time ago using IDA Pro, cam licenses weren't a problem at all, but synology put a time bomb in a code, which disabled cams and recordings after some time, we checked almost all dlls and when opened one .lib file in full screen there was message from developers of Surveillance Station in a binary code "NO HACK ME" ))) that was a funny way to joke )) Edited April 9, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 11, 2023 Share #677 Posted April 11, 2023 (edited) Hi, I’m really hoping someone can point me in the right direction. I’m using a fairly dated version of TCRP 0.9 and dva1622 7.1 I really want to upgrade to latest TCRP so I can be up to date on DSM. Here are the steps I’ve taken this far. Download/write latest TCRP to usb drive Booted flash drive and performed these commands. ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.1-42962 withfriend exitcheck.sh reboot when system booted back up, the tcrp friend page came one but no IP detected. when I opened synology assistant, machine was discovered but status was not installed. When I open the IP, I get no drives detected. i shut down the machine, reinserted my previous usb key and rebooted machine, everything is back now. what am I not doing correctly here? any help is much appreciated. Edited April 11, 2023 by merve04 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 11, 2023 Author Share #678 Posted April 11, 2023 6 hours ago, merve04 said: Hi, I’m really hoping someone can point me in the right direction. I’m using a fairly dated version of TCRP 0.9 and dva1622 7.1 I really want to upgrade to latest TCRP so I can be up to date on DSM. Here are the steps I’ve taken this far. Download/write latest TCRP to usb drive Booted flash drive and performed these commands. ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA1622 realmac ./rploader.sh build dva1622-7.1.1-42962 withfriend exitcheck.sh reboot when system booted back up, the tcrp friend page came one but no IP detected. when I opened synology assistant, machine was discovered but status was not installed. When I open the IP, I get no drives detected. i shut down the machine, reinserted my previous usb key and rebooted machine, everything is back now. what am I not doing correctly here? any help is much appreciated. Check your cmdline while DSM is up and running (with old loader) by running cat /proc/cmdline and then use these values to recreate your new loader. 1 Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 11, 2023 Share #679 Posted April 11, 2023 2 hours ago, pocopico said: Check your cmdline while DSM is up and running (with old loader) by running cat /proc/cmdline and then use these values to recreate your new loader. Thanks for the response, I followed the command as you suggested, I see many lines with values. Which ones should I be paying attention too? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 12, 2023 Share #680 Posted April 12, 2023 (edited) 5 hours ago, merve04 said: Thanks for the response, I followed the command as you suggested, I see many lines with values. Which ones should I be paying attention too? Your hardware information is insufficient. Please attach a screen capture of the monitor where TCRP FRIEND is executed and tell me your H/W specifications. (MOBO model, separate use of Sata controller, etc.) I guess I'll have to check the junior logs if needed. Edited April 12, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 12, 2023 Share #681 Posted April 12, 2023 1 hour ago, Peter Suh said: Your hardware information is insufficient. Please attach a screen capture of the monitor where TCRP FRIEND is executed and tell me your H/W specifications. (MOBO model, separate use of Sata controller, etc.) I guess I'll have to check the junior logs if needed. I've attached a screenshot of the cat /proc/cmdline I have a Gigabyte B365M DS3H, Intel i5-8400, 2x 16GB Corsair ram, 2x jmicron jmb585. My server is currently occupied hosting streams but at my next availability, I can boot the usb key back up and take a picture of when the tcrp friend screen comes on. It's my understanding I do not need to do "./rploader.sh satamap" due to DVA1622 uses devicetree and sometime ago TCRP had an automated approach in finding the drives. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 12, 2023 Share #682 Posted April 12, 2023 1 hour ago, merve04 said: I've attached a screenshot of the cat /proc/cmdline I have a Gigabyte B365M DS3H, Intel i5-8400, 2x 16GB Corsair ram, 2x jmicron jmb585. My server is currently occupied hosting streams but at my next availability, I can boot the usb key back up and take a picture of when the tcrp friend screen comes on. It's my understanding I do not need to do "./rploader.sh satamap" due to DVA1622 uses devicetree and sometime ago TCRP had an automated approach in finding the drives. Anyway, since nic seems to be working, let's check the log through junior. It seems that you are already in junior mode because you haven't installed DSM yet. Please check and attach the log through the TTYD web console as shown below. You must use a web browser. http://<youripaddr>:7681/ id : root / pw : ( no password ) cat /var/log/linuxrc.syno.log ls -l /sys/block ls -la /sys/class/ata_device ls -l /dev/syno* 1 Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 12, 2023 Share #683 Posted April 12, 2023 (edited) 19 hours ago, Peter Suh said: Anyway, since nic seems to be working, let's check the log through junior. It seems that you are already in junior mode because you haven't installed DSM yet. Please check and attach the log through the TTYD web console as shown below. You must use a web browser. http://<youripaddr>:7681/ id : root / pw : ( no password ) cat /var/log/linuxrc.syno.log ls -l /sys/block ls -la /sys/class/ata_device ls -l /dev/syno* Here is what I get on the TCRP friend screen. Regarding your instructions, when booting my server with the functional USB key, if i enter my ip, http://10.10.1.101:7681/ in my web browser, firefox, I get connection closed. Edited April 12, 2023 by merve04 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 13, 2023 Share #684 Posted April 13, 2023 3 hours ago, merve04 said: Here is what I get on the TCRP friend screen. Regarding your instructions, when booting my server with the functional USB key, if i enter my ip, http://10.10.1.101:7681/ in my web browser, firefox, I get connection closed. Are the LEDs on the NIC lit? In addition, the ability to check with the Getty console when the NIC is not operating is Added to my M SHELL for TCRP FRIEND. Please refer to the contents below and create the loader again. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 14, 2023 Share #685 Posted April 14, 2023 I'm not sure why its the menu.sh is all in chinese or something, but i managed to go through the menu by just hitting enter,enter,enter,enter and it started building the key, im concern that the SN is of SJR type. Server got the same error on Friend screen, but i let it boot and synology assistant showed system as migrate-able. I guess before I decide to proceed, how can i adjust the SN so i wont have an issue with surveillance station? Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 15, 2023 Share #686 Posted April 15, 2023 On 4/12/2023 at 8:21 PM, Peter Suh said: Are the LEDs on the NIC lit? In addition, the ability to check with the Getty console when the NIC is not operating is Added to my M SHELL for TCRP FRIEND. Please refer to the contents below and create the loader again. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Well I used pocopico's tcrp to generate a UBR serial# and inputed it in your build, happy it booted in DSM but just like last time in July '22, it wiped all my personal settings without prompting me if I wanted or not. Its frustrating but i guess the important thing is my data is intact. Thanks for the support. 1 Quote Link to comment Share on other sites More sharing options...
yorkman Posted April 16, 2023 Share #687 Posted April 16, 2023 (edited) I'm using Surveillance on my physical DS920+ with DVA1622 vm which keeps running out of disk space. I'm forced to add like 100 GB every week and there's nothing that I can find on the DVA1622 disk volume. It's 0 bytes. It is paired in CMS as a recording server so that I have the required licenses for my cameras. So my question or two is, 1) is this the correct setup (DVA1622 must be the Recording Server while my physical DS920+ is the Host?). I want the DS920+ to use all the storage for the cameras and it does with this setup...I just don't understand why does DVA1622 need any storage space other than for its packages. It has nothing installed except Surveillance with an empty Shared Folder and no camera recordings I did find after ssh'ing to the dva1622 vm that this path uses all the storage but why? What is it for and can I just rm it? /volume1/@appstore/SurveillanceStation/local_display/.config/chromium-local-display/BrowserMetrics which has over 54,000 files like: BrowserMetrics-643B46F4-1315.pma that are 4 MB each Edited April 16, 2023 by yorkman Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 17, 2023 Share #688 Posted April 17, 2023 On 4/12/2023 at 8:21 PM, Peter Suh said: Are the LEDs on the NIC lit? In addition, the ability to check with the Getty console when the NIC is not operating is Added to my M SHELL for TCRP FRIEND. Please refer to the contents below and create the loader again. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Is your version compatible to upgrade to 42962-U5? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 18, 2023 Share #689 Posted April 18, 2023 12 hours ago, merve04 said: Is your version compatible to upgrade to 42962-U5? Sure. Quote Link to comment Share on other sites More sharing options...
chrisrer Posted April 18, 2023 Share #690 Posted April 18, 2023 (edited) hi team im trying to install DVA1622 to a xpenology server with AMD Ryzen 3800x .......everything goes nice when comes the moment to insert manually pat file to begin installation ...all the time ill get error...ill try all updates in specific version and the same results.......DVA can install to AMD processors? Try it with ARPL and works perfectly...not understand why with tinycore not working....iwant this bootloader because is more faster Edited April 18, 2023 by chrisrer Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 18, 2023 Share #691 Posted April 18, 2023 Is there a reason why my cpu is running at 800mhz? Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted April 18, 2023 Share #692 Posted April 18, 2023 59 minutes ago, merve04 said: Is there a reason why my cpu is running at 800mhz? Speed step enabled in bios? Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 18, 2023 Share #693 Posted April 18, 2023 1 minute ago, dimakv2014 said: Speed step enabled in bios? No idea, will need to look, havent touched bios settings for years and this is a first I see it running at this speed, was always 2800 before. Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted April 18, 2023 Share #694 Posted April 18, 2023 1 minute ago, merve04 said: No idea, will need to look, havent touched bios settings for years and this is a first I see it running at this speed, was always 2800 before. Well your battery cr2032 could die and bios might be reseted to default settings Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 18, 2023 Share #695 Posted April 18, 2023 3 minutes ago, dimakv2014 said: Well your battery cr2032 could die and bios might be reseted to default settings For sure its a possibility, I'd imagine at POST, such warning would be presented. The reason I bring this up as I'm using @Peter Suhloader, prior I was using TCRP 0.9.0.2 i think?? Quote Link to comment Share on other sites More sharing options...
rusyn Posted April 23, 2023 Share #696 Posted April 23, 2023 (edited) Hello, I installed today DVA1622 build 42962 using Automated Redpill Loader following this Instruction to get 8 camera licenses on latest Surveillance Station v.9.1.0-10660 but after installation not even single license is available. The s/n was generated automatically by loader. What do I do wrong. Is anyone succeed and have all 8 cameras. Thanks, Edited April 23, 2023 by rusyn Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 23, 2023 Share #697 Posted April 23, 2023 13 hours ago, rusyn said: Hello, I installed today DVA1622 build 42962 using Automated Redpill Loader following this Instruction to get 8 camera licenses on latest Surveillance Station v.9.1.0-10660 but after installation not even single license is available. The s/n was generated automatically by loader. What do I do wrong. Is anyone succeed and have all 8 cameras. Thanks, Likely your SN has ****SJR******* You need one that has ****UBR****** I built a key using latest TCRP and wrote down the generated SN from it and imputed in my choice of loader. 2 Quote Link to comment Share on other sites More sharing options...
merve04 Posted April 23, 2023 Share #698 Posted April 23, 2023 (edited) On 4/18/2023 at 9:41 AM, dimakv2014 said: Speed step enabled in bios? That fixed it, I guess your build supports CPU scaling. Thanks for your support. Edited April 23, 2023 by merve04 Quote Link to comment Share on other sites More sharing options...
rusyn Posted April 23, 2023 Share #699 Posted April 23, 2023 4 hours ago, merve04 said: Likely your SN has ****SJR******* You need one that has ****UBR****** I built a key using latest TCRP and wrote down the generated SN from it and imputed in my choice of loader. You are correct. I did change SN to ****UBR****** and after rebuilding a loader all 8 licenses shows up. Thank you for a quick reply merve04. 1 Quote Link to comment Share on other sites More sharing options...
lightyear Posted April 28, 2023 Share #700 Posted April 28, 2023 On 4/16/2023 at 1:26 AM, yorkman said: I'm using Surveillance on my physical DS920+ with DVA1622 vm which keeps running out of disk space. I'm forced to add like 100 GB every week and there's nothing that I can find on the DVA1622 disk volume. It's 0 bytes. It is paired in CMS as a recording server so that I have the required licenses for my cameras. So my question or two is, 1) is this the correct setup (DVA1622 must be the Recording Server while my physical DS920+ is the Host?). I want the DS920+ to use all the storage for the cameras and it does with this setup...I just don't understand why does DVA1622 need any storage space other than for its packages. It has nothing installed except Surveillance with an empty Shared Folder and no camera recordings I did find after ssh'ing to the dva1622 vm that this path uses all the storage but why? What is it for and can I just rm it? /volume1/@appstore/SurveillanceStation/local_display/.config/chromium-local-display/BrowserMetrics which has over 54,000 files like: BrowserMetrics-643B46F4-1315.pma that are 4 MB each I assume you don't have a working local display GPU. Go to Application Center in SS and find and stop the Local Display service: You should also purge those *.pma files over SSH. They should not reappear now. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.