Dark Zydor Posted May 9, 2017 Share #2801 Posted May 9, 2017 Same for me when i tried few days ago 3617 (1.02a2). So I keep using 3615 (1.02a). Quote Link to comment Share on other sites More sharing options...
bchuter Posted May 9, 2017 Share #2802 Posted May 9, 2017 Hi Guys I have a question on VM. I have a successful system running with Jun's original Loader in VM (VMware 6.5) with DSM 6.0.2-8451 Update 9 I initially setup one virtual hdd from my datastore at 300Gig but have a need for more space. I have over 700gig free on my datastore and want to increase this drive to 500gig or 600gig. Can i do this ? Will the synology pick this up and use the additional space ? I know i could just add another virtual disk and provision it but id rather have one volume. I dont want to lose the data so thought id ask here if anyone has done this, before I attempted it and possibly trash my system and data ? Many thanks Quote Link to comment Share on other sites More sharing options...
chege Posted May 9, 2017 Share #2803 Posted May 9, 2017 Hi Guys I have a question on VM. I have a successful system running with Jun's original Loader in VM (VMware 6.5) with DSM 6.0.2-8451 Update 9 I initially setup one virtual hdd from my datastore at 300Gig but have a need for more space. I have over 700gig free on my datastore and want to increase this drive to 500gig or 600gig. Can i do this ? Will the synology pick this up and use the additional space ? I know i could just add another virtual disk and provision it but id rather have one volume. I dont want to lose the data so thought id ask here if anyone has done this, before I attempted it and possibly trash my system and data ? Many thanks Why dont you try to create test VM with, let say, 20GB hard drive. Install some packages, add fake data and then change hdd size. Best lessons comes from practice. It takes about 1 hour or less. Quote Link to comment Share on other sites More sharing options...
m3rlinux Posted May 10, 2017 Share #2804 Posted May 10, 2017 Please, does someone add network drivers for hp 332i interface (gen8) on 1.02a loaders? Many thanks. Inviato dal mio LG-D855 utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
hellbondz Posted May 10, 2017 Share #2805 Posted May 10, 2017 Hi. Anyone tried to update to 6.1.1-15101-2 version? Quote Link to comment Share on other sites More sharing options...
siri_uk Posted May 10, 2017 Share #2806 Posted May 10, 2017 Hi.Anyone tried to update to 6.1.1-15101-2 version? Updated gen 8 microserver to update 2 everything seems fine Quote Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted May 10, 2017 Share #2807 Posted May 10, 2017 Hi.Anyone tried to update to 6.1.1-15101-2 version? Updated Gen8 baremetal to 6.1.1-15101 Update 2. Reboot required. Everything seems okay. All Packages and services are working. Quote Link to comment Share on other sites More sharing options...
bchuter Posted May 10, 2017 Share #2808 Posted May 10, 2017 HI there Sorry if this is a repeat question. Im fine with bare metal installs, but the VM install is kicking my butt. Im trying to install on VMware 6.5 with Jun v1.02-alpha for DS3615xs i get the VM up and see the setup page where i need to insert the PAT file. I downloaded DS3615xs_1501.pat and tried to install that. I then get a failed to format hdd error (35) What i did was to create a folder on my datastore. Then I copied all 4 files from the loader to that folder When importing the VM It seemed corruped as i got network errors and could not delete or edit anything in the vm. I then had to edit the .vmx file and remove all the ethernet config, without doing this the vm would always complain about being part of the incorrect network port. and i could not edit the vm at all. the only way was to delete all the ethernet lines in the .vmx file then upload that to the datastore and import the VM again. then i reinstalled the network and this was ok. I then deleted the disk and re-added it pointing to synoboot.vmdk and setting it as SATA 0:0 and independant - persistent. then i added my storage drive as SCSI 0:0 and dependant mode it boots up fine and i get the initial setup page but when uploading the DSM pat file and starting the install i get the error that it cant format with error 35 Is there a guide someone has put together on how to get the VM installed on vmware 6.5 ? (ive tried searching a bit to no luck) Any assistance would be greatfull. This was after the sugestion to create a temp vm to test my disk expansion etc from my previous question. My existing VM is on the old 6.0 DSM with the original jun loader and i used a .ova file uploaded by korovis which had all the hard work done. So this is my first attempt really at getting this done from the provided loader files. Many thanks Quote Link to comment Share on other sites More sharing options...
Messenger Posted May 10, 2017 Share #2809 Posted May 10, 2017 Possible to update /upgrade baremetal (hp n54l) from DSM 6 to latest 6.1 with new loader? is there a upgrade guide or must it be a fresh installation? Quote Link to comment Share on other sites More sharing options...
m3rlinux Posted May 10, 2017 Share #2810 Posted May 10, 2017 Hi.Anyone tried to update to 6.1.1-15101-2 version? Updated Gen8 baremetal to 6.1.1-15101 Update 2. Reboot required. Everything seems okay. All Packages and services are working. Is it possibile to update from 6.0.2? Can you tell how? Thanks. Inviato dal mio LG-D855 utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
bchuter Posted May 10, 2017 Share #2811 Posted May 10, 2017 Better yet, could one of you guys with a working VM in ESXI 6.5 with the latest loader, please export an .ova of that and send me a link to it. This will be the quickest way for me to get going on the new loader in VM Pretty Please I have spend the entire day now and no matter what i do, i cannot format the drive. Many thanks Quote Link to comment Share on other sites More sharing options...
NoFate Posted May 10, 2017 Share #2812 Posted May 10, 2017 i changed from scsi controller to sata controller, then my esx 6.5 was able to find the drivers and format was succesful Quote Link to comment Share on other sites More sharing options...
bchuter Posted May 10, 2017 Share #2813 Posted May 10, 2017 i changed from scsi controller to sata controller, then my esx 6.5 was able to find the drivers and format was succesful WOW!!! that worked. I stumbled on that earlier in the day, but did not go ahead with it as it said it was going to format 2 disks......so i thought it was going to format the large storage one i added and the synoboot drive. (which ive had happen on the old DSM 5.2) Going ahead with that anyway, has allowed me to format and setup the system!!! i have the VM now installed with loader 1.02a2 and DS3617xs and DSM 6.1.1-15101 Update 2 Thanks so much.......i kid you not i have tried everything today for the entire day....i was so frustrated Even tried to get it going on vm workstation and had the same format issue.....was actually packing and and giving up when you posted that Thanks mate Quote Link to comment Share on other sites More sharing options...
NoFate Posted May 10, 2017 Share #2814 Posted May 10, 2017 np i had this issue before also Quote Link to comment Share on other sites More sharing options...
foxbat Posted May 10, 2017 Share #2815 Posted May 10, 2017 any clue how to update to 6.1.1. u2? (i'm on esx 6.5, 6.1.1 u1) and I cannot find the update Thank you Quote Link to comment Share on other sites More sharing options...
fitman Posted May 10, 2017 Share #2816 Posted May 10, 2017 Hi there, any success on ds3617xs with DSM 6.1.1? Finally, I can install DSM 6.1.1 using ds3617xs on bare-metal. Here is my installation procedure: 1. Using v1.02a2 and create the boot image with correct SN and MAC1 onto a USB drive 2. Only install 2 hard disk (I have 4 disks for RAID5) 3. Use find.synology.com and install thru web with default value 4. Wait for installation and reboot again 5. Install 6.1.1 update2 and wait for reboot 6. Install the remain 2 disks, and it is working now... Good luck to all... Quote Link to comment Share on other sites More sharing options...
Netstorm Posted May 10, 2017 Share #2817 Posted May 10, 2017 I've successfully updated Gen8 baremetal DS3615xs to 6.1.1-15101 Update 2 using 1.02 alpha loader. All seems to be OK except a HIGH security warning about DSM system files have incorrect hash values (when running Security Advisor). Incorrect hash values of system disk array have been found in the following file(s):/usr/lib/modules/bnx2x.ko, /usr/lib/modules/usbnet.ko I know it's not a big deal but still ... is this normal ? Many thanks for your work and time. Quote Link to comment Share on other sites More sharing options...
Neo_Reloaded Posted May 11, 2017 Share #2818 Posted May 11, 2017 @Netstorm, was it a migration from 6.0.2? What steps did you follow? I've successfully updated Gen8 baremetal DS3615xs to 6.1.1-15101 Update 2 using 1.02 alpha loader. All seems to be OK except a HIGH security warning about DSM system files have incorrect hash values (when running Security Advisor). Incorrect hash values of system disk array have been found in the following file(s):/usr/lib/modules/bnx2x.ko, /usr/lib/modules/usbnet.ko I know it's not a big deal but still ... is this normal ? Many thanks for your work and time. Quote Link to comment Share on other sites More sharing options...
filippo333 Posted May 11, 2017 Share #2819 Posted May 11, 2017 Any plans to release 1.02 proper Jun? 1.02a2 has been rock stable for me both in VMware and my Baremetal Skylake system Sent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
amastro Posted May 11, 2017 Share #2820 Posted May 11, 2017 Hi there, I'm Trying to upgrade 6.1.1-15101 Update 2 and it's failing (ERR = 21) ! I'm using DS3617xs 1.02a2 with 6.1.1-15101 Update1. My hardwer is an Acer Aspire one 725 (netbook). it works great, all work. Where is the problem during this update? Quote Link to comment Share on other sites More sharing options...
dutchnas Posted May 11, 2017 Share #2821 Posted May 11, 2017 When will there be AMD support for the 1.02a boot loader? Quote Link to comment Share on other sites More sharing options...
PulsatingQuasar Posted May 11, 2017 Share #2822 Posted May 11, 2017 When will there be AMD support for the 1.02a boot loader? Has been working fine for me on multiple AMD ITX boards. Quote Link to comment Share on other sites More sharing options...
krty Posted May 11, 2017 Share #2823 Posted May 11, 2017 I use this AMD Master board http://www.biostar.com.tw/app/en/mb/int ... p?S_ID=856 It is working fine for me, on DS3617xs 1.02a2 boot loader and 6.1.1-15101 Update2 Quote Link to comment Share on other sites More sharing options...
Ziomalski Posted May 11, 2017 Share #2824 Posted May 11, 2017 Has anyone's Quickconnect and DDNS services stopped working? I checked the settings and now when I click on "Log in to Synology account" a message box pops up and says "Oops, an unknown error has occured". I have had this working for months without issue and I havn't changed/updated anything since 6.0.2u9. Have they stopped us all? Do I need a new MAC/SN combo? Any suggestions will be appreciated. (I'm running on ESXi with the older stable loader) Thanks Quote Link to comment Share on other sites More sharing options...
filippo333 Posted May 11, 2017 Share #2825 Posted May 11, 2017 Has anyone's Quickconnect and DDNS services stopped working? I checked the settings and now when I click on "Log in to Synology account" a message box pops up and says "Oops, an unknown error has occured". I have had this working for months without issue and I havn't changed/updated anything since 6.0.2u9. Have they stopped us all? Do I need a new MAC/SN combo? Any suggestions will be appreciated.(I'm running on ESXi with the older stable loader) Thanks Yep exactly what you said. Mine used to work perfectly, I guess they caught onto our hacking ways! It's not a deal breaker for me though, you can easily setup a dynamic dns on a third party router. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.