cstout Posted October 31, 2016 Share #901 Posted October 31, 2016 (edited) I am hoping someone in here will be so kind to tell me what I am doing wrong, I am trying to install on a Dell Optiplex 760 I downloaded the hybrid .img Edited the PID ViD & Mac I did not do the serial simply because I dont know how to generate, But I assume you dont need this if your not using quick connect. I am able to get it load up tells me it sees a drive from a prev install, I choose migrate, No matter what I do it reached 56% and Error 13. Will someone direct me to proper files/ method for my Optiplex 760 non UEFI bare metal ? Thank you all kindly. I had this same issue initially and read that you had to swap out a file on the flash drive with an updated one. Sorry that's vague and not very helpful, but if you haven't already, I'd recommend starting over with jun's v1.0 that just released. The file swap and many other issues are all fixed in this release. I also use Optiplex 760's and I am very happy with them. Edit: Sorry, just saw your most recent post so this is irrelevant. Congrats on the successful build! Edited October 31, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
sbafs Posted October 31, 2016 Share #902 Posted October 31, 2016 Migrate successfully on HP N54l. But I can only see 4 HDD. I got 6 HDD. 4 connect to backplane. 1 esata and 1 dvd. for DSM 5 I just need to edit internalportcfg to 3f so all disk considered Internal. I try change SataPortMap to 6 and also 42 but another 2 still not detected.. Any Idea? Try 51 or 411 Quote Link to comment Share on other sites More sharing options...
trublu Posted October 31, 2016 Share #903 Posted October 31, 2016 I migrated and it is working ok Please can you provide more details on how you did this? I thought LSI cards weren't supported yet. Quote Link to comment Share on other sites More sharing options...
Elpee Posted October 31, 2016 Share #904 Posted October 31, 2016 I migrated and it is working ok Sorry, but did you use the loader image of Jun v.1 at page 1 or Arcao v.2? Thanks. Quote Link to comment Share on other sites More sharing options...
kahooli Posted October 31, 2016 Share #905 Posted October 31, 2016 Please ...Someone who can tell me the correct configuration of SataPortMap = for Gen7 N54l with 5 discs !! Thank you!! SataPortMap=ABCDWhere A is how many ports on the first HDD/RAID Controller, B the second and so forth. On the Gen7 HP Microserver, the 1st controller is the onboard RAID (I believe). If the single onboard SATA port and the rear eSATA port are on the same controller, then it would be SataPortMap=42 If they are seperate controllers, then SataPortMap=411 Please reply back with your findings, as I'm curious Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
jcdln Posted November 1, 2016 Share #906 Posted November 1, 2016 Hey guys, I tried to boot on Trantor's last loader (v1) but I can't boot grub. It just doesn't work on my mobo whereas Arcao's does but doesn't recognze my sata controller (ICH8R). Any idea why? I tried to write the image through Win32 disk imager, linuxmint usb writer and gnome multi-writer without success. I also changed my VID & PID, SN & MAC address but no more results. Thank you for your help. Quote Link to comment Share on other sites More sharing options...
neonflx Posted November 1, 2016 Share #907 Posted November 1, 2016 I migrated and it is working ok Please can you provide more details on how you did this? I thought LSI cards weren't supported yet. The LSI works with the latest loader, I have to disabled the onboard controller in order to recognized the 8 hd attached to it, before disabling the onboard controllers I was seen 6 HD and 2 as external, once I disabled the onboard and saw all 8 HD I was able to migrate. LSI 9211-81 Quote Link to comment Share on other sites More sharing options...
cferra Posted November 1, 2016 Share #908 Posted November 1, 2016 Was anyone able to get the Mellanox Connectx-2 cards working? I thought that I saw that support was added and that someone had it up and running. I'm trying with Jun's V1 loader released on the 29th. Chris Quote Link to comment Share on other sites More sharing options...
Moonlight Posted November 1, 2016 Share #909 Posted November 1, 2016 Everything works with new V1 loader... Except for 2 nic's. I to am experiencing this issue. If you set just mac1=, everything is fine and dsm reports both nics (although the second one is obviously inaccessible remotely), but as soon as set mac2= is added, both connections quit. That's a pretty big problem. Any thoughts? I want my 10G connection, pls hlp Quote Link to comment Share on other sites More sharing options...
froggyman Posted November 1, 2016 Share #910 Posted November 1, 2016 I am currently on 5.2 and willing to upgrade to the latest v1 bootloader and upgrade my DSM to version 6. Is it possible to upgrade and remount my harddrives without data loss? 4x 2tb they are ext4 drives. It is no problem that they are not partitioned as btrfs drives. I've worked with btrfs before and since raid 5/6 are still not declared stable i'm not willing to take the risk. https://btrfs.wiki.kernel.org/index.php/Status My hardware: Asrock J3160-ITX, 8GB DDR3 1600. Quote Link to comment Share on other sites More sharing options...
carlchan Posted November 1, 2016 Share #911 Posted November 1, 2016 I've recently annouce that my work on a kernel mode dynamic patcher in this post 10/29: It's time to release a loader with a proper version number now. Here is my loader v1.0 https://mega.nz/#F!18kB1BTB!1ft3N5Hnrcnqsneu0aQUkA New features & fix: Would have esxi 5.5 ovf version? Quote Link to comment Share on other sites More sharing options...
mmaster23 Posted November 1, 2016 Share #912 Posted November 1, 2016 I am currently on 5.2 and willing to upgrade to the latest v1 bootloader and upgrade my DSM to version 6. Is it possible to upgrade and remount my harddrives without data loss? 4x 2tb they are ext4 drives. It is no problem that they are not partitioned as btrfs drives. I've worked with btrfs before and since raid 5/6 are still not declared stable i'm not willing to take the risk. https://btrfs.wiki.kernel.org/index.php/Status My hardware: Asrock J3160-ITX, 8GB DDR3 1600. Dsm doesn't use btrfs raid.. It uses Linux mdadm raid. Btrfs can be used as a filesystem.. It can also be a integrated raid system combined with filesystem. You can migrate your data to the dsm 6 platform but keep in mind this stuff is very much beta and isn't production ready (if it'll ever be that). Make backups.. Quote Link to comment Share on other sites More sharing options...
NeoID Posted November 1, 2016 Share #913 Posted November 1, 2016 Is there a better way of hiding the boot drive on ESXI or should I still add rmmod=ata_piix to the list of parameters? Edit: Doesn't seem to work. I've tried both ata_piix and rmmod=ata_piix as extra arguments Quote Link to comment Share on other sites More sharing options...
sat4064 Posted November 1, 2016 Share #914 Posted November 1, 2016 Please ...Someone who can tell me the correct configuration of SataPortMap = for Gen7 N54l with 5 discs !! Thank you!! SataPortMap=ABCDWhere A is how many ports on the first HDD/RAID Controller, B the second and so forth. On the Gen7 HP Microserver, the 1st controller is the onboard RAID (I believe). If the single onboard SATA port and the rear eSATA port are on the same controller, then it would be SataPortMap=42 If they are seperate controllers, then SataPortMap=411 Please reply back with your findings, as I'm curious Sent from my iPhone using Tapatalk Hi, I have an G7 (N36L) and I don't know how map my eSata disk. What "SataPortMap=" do I set? Quote Link to comment Share on other sites More sharing options...
sat4064 Posted November 1, 2016 Share #915 Posted November 1, 2016 Please ...Someone who can tell me the correct configuration of SataPortMap = for Gen7 N54l with 5 discs !! Thank you!! SataPortMap=ABCDWhere A is how many ports on the first HDD/RAID Controller, B the second and so forth. On the Gen7 HP Microserver, the 1st controller is the onboard RAID (I believe). If the single onboard SATA port and the rear eSATA port are on the same controller, then it would be SataPortMap=42 If they are seperate controllers, then SataPortMap=411 Please reply back with your findings, as I'm curious Sent from my iPhone using Tapatalk Hi, I have an G7 (N36L) and I don't know how map my eSata disk. What "SataPortMap=" do I set? Quote Link to comment Share on other sites More sharing options...
tdutrieux Posted November 1, 2016 Share #916 Posted November 1, 2016 Hello ! Test report : I was able to install DSM6 using Jun's loader V1.0. The platform is ESXi6 with LSI2008 pci passthrough. Disks on the LSI are properly detected. I also first added a virtual disk to install DSM6 as I do not not want to do the migration right now. Cannot say anything on stability right now, just reporting my first test as it's the first time I can see disks on the LSI in ESXi. Now waiting further before migration of important data. KR, TitiD Quote Link to comment Share on other sites More sharing options...
FuRiuS Posted November 1, 2016 Share #917 Posted November 1, 2016 First of all thanks for the new DMS 6 Loader. But i have a big problem with my Realtek RTL8111/8168B Gigabit Ethernet controller. After i installed the new loader, the max network speed is only 19mb/s write and 1,4mb/s read. Thanks for your help! Quote Link to comment Share on other sites More sharing options...
laxburn Posted November 1, 2016 Share #918 Posted November 1, 2016 Thanks to everyone for the new loader. Everything works (Baremetal Intel® Server Board S1200BTL + Xeon) installed with hybridbiosuefi2. All 3 NICs and running SATA controller. But my backplane HP Smart Array P410 RAID controller is no longer recognized. Under XPEnoboot 5.2-5967.1 everything went. In the hardware support list of the P410 is indeed drin. Anyone have a tip or best guidance for me? thanks for your help !!! Quote Link to comment Share on other sites More sharing options...
segator Posted November 1, 2016 Share #919 Posted November 1, 2016 Hi, thank you for your work, it's working perfectly I running DSM6 on KVM in the host unRAID, mouting NFS shares of my unraid server to DSM so I can use almost all the features that DSM have (except btrfs things) the only problem is the virtio (para-virtualitzed) drivers doesn't work, Could be possible to add this drivers? now i'm using sata emulation and e1000 for network Quote Link to comment Share on other sites More sharing options...
CtrlAltDel Posted November 1, 2016 Share #920 Posted November 1, 2016 Everything works with new V1 loader... Except for 2 nic's. I to am experiencing this issue. If you set just mac1=, everything is fine and dsm reports both nics (although the second one is obviously inaccessible remotely), but as soon as set mac2= is added, both connections quit. That's a pretty big problem. Any thoughts? I want my 10G connection, pls hlp When you added the mac2= did you also try editing the synoinfo.conf file to manually set it as active? It should then show under Hardware and Power with a check box for WOL. Maybe you can use that to see if the card is accessible on the network? Quote Link to comment Share on other sites More sharing options...
Martino Posted November 1, 2016 Share #921 Posted November 1, 2016 anobody can tell how this loader support C2750D4I ? (in barebone context) Quote Link to comment Share on other sites More sharing options...
bartjuu Posted November 1, 2016 Share #922 Posted November 1, 2016 Guys, is there some Hyper-V support in the pipeline yet? I would love to see a boot ISO with the new Jun loader! Quote Link to comment Share on other sites More sharing options...
F5BJR Posted November 1, 2016 Share #923 Posted November 1, 2016 I don't know what is the correct value for the grub parameter SataPortMap= for see disk 5, but I've tried different values without success For N54L use SataPortMap=5 or SataPortMap=6 Quote Link to comment Share on other sites More sharing options...
trublu Posted November 1, 2016 Share #924 Posted November 1, 2016 (edited) I migrated and it is working ok Please can you provide more details on how you did this? I thought LSI cards weren't supported yet. The LSI works with the latest loader, I have to disabled the onboard controller in order to recognized the 8 hd attached to it, before disabling the onboard controllers I was seen 6 HD and 2 as external, once I disabled the onboard and saw all 8 HD I was able to migrate. LSI 9211-81 Thanks for the response. Do you mind sharing what motherboard? Edited November 1, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
hotshots Posted November 1, 2016 Share #925 Posted November 1, 2016 Is it possible to add: https://github.com/groeck/nct6775 it might solve Temp and hybernate issues on Asroch N3150/N3700 Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.