kahooli
Member-
Posts
10 -
Joined
-
Last visited
Everything posted by kahooli
-
I've rebased the vendor changes on 3.10.77 to 3.10.102, seems still works. Update for 6.1 loader at https://mega.nz/#F!18kB1BTB!1ft3N5Hnrcn ... A!5kcjyJ7R THANKS Jun! I can see in the grub.cfg file the AMD loader is commented out, does this mean that those using Gen7 HP Microservers have to wait a little longer? Just wanted to make sure before trying to use this.
-
SataPortMap=ABCDWhere A is how many ports on the first HDD/RAID Controller, B the second and so forth. On the Gen7 HP Microserver, the 1st controller is the onboard RAID (I believe). If the single onboard SATA port and the rear eSATA port are on the same controller, then it would be SataPortMap=42 If they are seperate controllers, then SataPortMap=411 Please reply back with your findings, as I'm curious Sent from my iPhone using Tapatalk
-
Recreated my boot USB flash drive for my my HP N40L Gen7 Microserver with this image. Very easy and workes well.From Arcao's Mega folder linked from THIS POST, I used the dsm6.0.2-8451/v2/jun-amd-baremetal-hybrid-uefibios-arcao-v2.zip file to flash a USB flash drive with the Win32 Disk Imager tool Used Flash Drive Information Extractor to get USB flash drive's VID & PID Updated grub.cfg (updated sn, mac1, vid & pid, and added SataPortMap & mac2. Of course they aren't all x's )serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=4 syno_hw_version=DS3615xs vender_format_version=2 vid=0x05DC pid=0xA761 console=ttyS0,115200n8 sn=xxxxxxxxxx mac1=xxxxxxxxxxxx mac2=xxxxxxxxxxxx withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Installed USB to internal USB port on System Board and booted server DSM already on 6.0.2-8451 Update 2 Working well Thanks again Arcao & jun! Just one question; After rebooting the server (or powering off then powering on), I get System Event Notification stating "Diskstation experienced an improper shutdown". I'm only powering it off or rebooting from within the DSM web interface. Do we know what the cause of this is?
-
Ooooh! I'll try it What I've done on my HP N40L Gen7 Microserver...From Arcao's Mega folder linked from THIS POST, I used the dsm6.0.2-8451.2/v2/jun-baremetal-hybrid-uefibios-arcao-v2.zip file to flash a USB flash drive with the Win32 Disk Imager tool deleted the file zImage located on the USB drive under USB:\image\DS3615xs copied bzImage from THIS POST (for AMD systems) to same folder (USB:\image\DS3615xs) & renamed to zImage Used Flash Drive Information Extractor to get USB flash drive's VID & PID Updated grub.cfg (updated sn, mac1, vid & pid, and added SataPortMap & mac2. Of course they aren't all x's )serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=4 syno_hw_version=DS3615xs vender_format_version=2 vid=0x05DC pid=0xA761 console=ttyS0,115200n8 sn=xxxxxxxxxx mac1=xxxxxxxxxxxx mac2=xxxxxxxxxxxx withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Installed USB to internal USB port on System Board and booted server Migrated to latest DSM 6 (6.0.2-8451) Waited for database update to complete (see Notifications panel for confirmation when this is done) Updated to DSM 6.0.2-8451 Update 2 So far so good Thanks to both Arcao & jun!
-
Thanks , that's what I suspected. Hello, Can you tell me what is the last DSM version I can update my HP Gen7 to ? Is there a tutorial to explain how ? I'm sorry but I've read the whole thread and i can't find pecisely the answer. Thanks. I'm running DSM 5.2-5967 Update 2 in a baremetal install on a Gen7 setup, by reading various threads on this forum and googling. The answers are there, you just need to look for them. I can't remember exactly which ones I used right now, and come to think of it, I think I used a variety of sources to understand how to get my setup to work just right. It probably helps that my day job is as a server IT professional. Sent from my iPad using Tapatalk
-
My latest images are always placed here: https://mega.nz/#F!Oc8TCLgD!IiullNuGs95RlelM9SKd5w Would I be right to assume that this still isn't compatible with the Gen7 HP Microserver as it is an AMD CPU not Intel? Sent from my iPhone using Tapatalk