Peter Suh Posted July 27, 2023 Author Share #576 Posted July 27, 2023 7 hours ago, maqros said: Hi guys. Is there any way to roll back or recover, if I trapped into this)? I've got DS920+ with M.2 NVMe cache I will share how to temporarily change the loader back to another model and handle it. Rebuild the loader with a model different from the model you are currently using (change only the model, keep the serial/MAC address) as an example DS920+ U2 -> DS923+ U0(U1) -> DS920+ U0(U1) You can downgrade by changing to another model for a while and going through two migrations back to the original model. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 28, 2023 Author Share #577 Posted July 28, 2023 On 7/25/2023 at 2:50 PM, Peter Suh said: [notification] DT based DS920+ (Gemini Lake), DS1621+ (v1000), ds923+ (r1000) Please refrain from updating to 7.2-64570 U2 for your platform. An issue has been identified where M.2 NVMe caches are not recognized as DT devices. If you are not using M.2 NVMe cache, this issue is irrelevant. As soon as the cause is confirmed, related fixes will be distributed and announced. [notification] That issue has been resolved. In case of M SHELL, you need to rebuild the loader. 2 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted July 29, 2023 Share #578 Posted July 29, 2023 (edited) Hi is it possbile install DSM with Mshell without CPU Freq. Addon ? Because as you know with this addon the Gne8 has not the full CPU performance. thank you Edited July 29, 2023 by nemesis122 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 29, 2023 Author Share #579 Posted July 29, 2023 6 hours ago, nemesis122 said: Hi is it possbile install DSM with Mshell without CPU Freq. Addon ? Because as you know with this addon the Gne8 has not the full CPU performance. thank you A script to disable scalable is already installed. sudo -i cd /usr/sbin sh unscaler.sh Re-enable it as follows. sh rescaler.sh 2 Quote Link to comment Share on other sites More sharing options...
sliders Posted August 2, 2023 Share #580 Posted August 2, 2023 Hello, why each time I start with the latest version v0.9.4.3-2 I don't have the installation console as indicated here for me there is only the tinycore-redpill.v0.9.3.0-1 version with console Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 2, 2023 Author Share #581 Posted August 2, 2023 27 minutes ago, sliders said: Hello, why each time I start with the latest version v0.9.4.3-2 I don't have the installation console as indicated here for me there is only the tinycore-redpill.v0.9.3.0-1 version with console You first reported that the installation console menu did not appear in v0.9.4.3-2. I will let you know after analyzing what the differences are between the two versions. Probably only aterm was used in the old version, In the latest version, urxvt for multilingual support is used. I'm not sure for some reason, but it looks like urxvt failed to install or couldn't run in your v0.9.4.3-2. Can you run urxvt in one of the four console windows where commands are available? I would like to know the result. If only English is needed, I don't know if a supplementary plan is needed to use only aterm. 1 Quote Link to comment Share on other sites More sharing options...
shibby Posted August 2, 2023 Share #582 Posted August 2, 2023 (edited) i made yesterday a fresh instalation. At the first run it did an update of M-Shell and waited for "any key". Push a "spacebar" didnt help but ENTER did and M-Shell Menu appear. @Peter Suh at the moment i have DSM 7.2-64561 (DS920+)... Can i safety update to DSM 7.2-64570 without redpill re-compilation or i have to re-compile redpill first? Edited August 2, 2023 by shibby Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 2, 2023 Author Share #583 Posted August 2, 2023 51 minutes ago, shibby said: i made yesterday a fresh instalation. At the first run it did an update of M-Shell and waited for "any key". Push a "spacebar" didnt help but ENTER did and M-Shell Menu appear. @Peter Suh at the moment i have DSM 7.2-64561 (DS920+)... Can i safety update to DSM 7.2-64570 without redpill re-compilation or i have to re-compile redpill first? There is a possibility of unexpected errors when using a lower version loader. Try updating without recompiling (rebuilding). If the DSM recovery request is repeated, the loader must be rebuilt. Quote Link to comment Share on other sites More sharing options...
shibby Posted August 2, 2023 Share #584 Posted August 2, 2023 (edited) thx, no redpill update needed. I just updated DSM via GUI and "Friend" got it Edited August 2, 2023 by shibby 1 Quote Link to comment Share on other sites More sharing options...
sliders Posted August 2, 2023 Share #585 Posted August 2, 2023 Il y a 11 heures, Peter Suh a dit : You first reported that the installation console menu did not appear in v0.9.4.3-2. I will let you know after analyzing what the differences are between the two versions. Probably only aterm was used in the old version, In the latest version, urxvt for multilingual support is used. I'm not sure for some reason, but it looks like urxvt failed to install or couldn't run in your v0.9.4.3-2. Can you run urxvt in one of the four console windows where commands are available? I would like to know the result. If only English is needed, I don't know if a supplementary plan is needed to use only aterm. Merci , THANKS Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 3, 2023 Author Share #586 Posted August 3, 2023 19 hours ago, sliders said: Merci , THANKS Are you French living in France? If so, M SHELL automatically detects the router's country and tries to automatically switch to French. We have modified and distributed the function promised yesterday. If you try and fail with urxvt , aterm is run instead. 1 Quote Link to comment Share on other sites More sharing options...
shibby Posted August 5, 2023 Share #587 Posted August 5, 2023 I want to show off my new toy M-shell loaded ofc. cpu i5-4570 msi h81m-e34 8GB ram PERC H310 IT mode 8x 12TB SAS 4kN 4x 4TB WD Gold case Aerocool Cipher be quiet 700W System Power 9 😁 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 5, 2023 Author Share #588 Posted August 5, 2023 52 minutes ago, shibby said: I want to show off my new toy M-shell loaded ofc. cpu i5-4570 msi h81m-e34 8GB ram PERC H310 IT mode 8x 12TB SAS 4kN 4x 4TB WD Gold case Aerocool Cipher be quiet 700W System Power 9 😁 All 3 images attached look broken. See settings below. [HBA - H200, H310 recommended setting] DDSML, DS3622xs+, not EUDEV "DiskIdxMap": "1000", "SataPortMap": "12", "SasIdxMap: "0", "MaxDisks: "24" 1 Quote Link to comment Share on other sites More sharing options...
shibby Posted August 9, 2023 Share #589 Posted August 9, 2023 On 8/5/2023 at 3:32 PM, Peter Suh said: All 3 images attached look broken. On 8/5/2023 at 3:32 PM, Peter Suh said: See settings below. i`m on DS3622xs+ with DDSML 2 1 Quote Link to comment Share on other sites More sharing options...
dmankl Posted August 11, 2023 Share #590 Posted August 11, 2023 Is there a reason my sas drives wont show smart details ? Quote Link to comment Share on other sites More sharing options...
asaf Posted August 11, 2023 Share #591 Posted August 11, 2023 Hi does TCRP M-shell support for whatever Synology model all at the same time - Intel gen10 CPU - LSI SCSI HBA - NVMe read cache - iGPU hardware acceleration Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 11, 2023 Author Share #592 Posted August 11, 2023 (edited) 2 hours ago, asaf said: Hi does TCRP M-shell support for whatever Synology model all at the same time - Intel gen10 CPU - LSI SCSI HBA - NVMe read cache - iGPU hardware acceleration It sounds like you want to use both transcoding and HBA. As of now, DS918+ is the only model. However, unlike Jun's loader whose HBA was used up to DSM 6.2.3, this model has a problem of not displaying the disk's serial information properly in S.M.A.R.T. If this part is used as a RAID, it can be fatal because the location to be replaced is determined by serial information when a bad disk is replaced. So if you are considering RAID, we recommend adding a SATA controller that supports AHCI instead of HBA and DS920+ or DS1520+ that supports automatic disk mapping. This symptom is also common with the redpill loader covered. Edited August 11, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
asaf Posted August 12, 2023 Share #593 Posted August 12, 2023 5 hours ago, Peter Suh said: It sounds like you want to use both transcoding and HBA. As of now, DS918+ is the only model. However, unlike Jun's loader whose HBA was used up to DSM 6.2.3, this model has a problem of not displaying the disk's serial information properly in S.M.A.R.T. If this part is used as a RAID, it can be fatal because the location to be replaced is determined by serial information when a bad disk is replaced. So if you are considering RAID, we recommend adding a SATA controller that supports AHCI instead of HBA and DS920+ or DS1520+ that supports automatic disk mapping. This symptom is also common with the redpill loader covered. Thank you! Can you advice on a compatible SATA controller with at least 4 SATA channels? Or point me to a resource of some kind? Quote Link to comment Share on other sites More sharing options...
mealan Posted August 19, 2023 Share #594 Posted August 19, 2023 having an issue with ESXi and getting drives detected for new install. FRIEND doesn't detect the drive, but the previous method has a format error. I have several using normal tinycore with no issue at 7.0, was looking to update and see what new progress has made, this is the first time i'm trying m-shell. it's awesome so far, i'm sure it'll be great once i can get it going. 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted August 22, 2023 Share #595 Posted August 22, 2023 (edited) No R8168/R8169 nic extension found in latest loader v0.9.4.3-2 Usb nics on R8152 and R8153 as well as Asix don't help Edited August 22, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted August 23, 2023 Share #596 Posted August 23, 2023 (edited) On 8/22/2023 at 1:30 PM, dimakv2014 said: No R8168/R8169 nic extension found in latest loader v0.9.4.3-2 Usb nics on R8152 and R8153 as well as Asix don't help You need to connect your LAN cable to the internet via your R8168/R8169 network card. Also you have to select/specify a Synology serial number and MAC address in the menu. Edited August 23, 2023 by DSfuchs Quote Link to comment Share on other sites More sharing options...
maxime Posted August 23, 2023 Share #597 Posted August 23, 2023 On 8/22/2023 at 1:30 PM, dimakv2014 said: No R8168/R8169 nic extension found in latest loader v0.9.4.3-2 Usb nics on R8152 and R8153 as well as Asix don't help Does XPEnology (TinyCore RedPill Loader with M-Shell) support USB Nics? 😲🤔 Quote Link to comment Share on other sites More sharing options...
DSfuchs Posted August 23, 2023 Share #598 Posted August 23, 2023 49 minutes ago, maxime said: Does XPEnology (TinyCore RedPill Loader with M-Shell) support USB Nics? 😲🤔 Synology natively supports USB network cards. For example, here are the package sources for 2.5GbE Realtek: https://github.com/bb-qq/r8152 If necessary, the configuration of the loader could be done on another system/laptop. 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted August 23, 2023 Share #599 Posted August 23, 2023 (edited) 6 hours ago, DSfuchs said: You need to connect your LAN cable to the internet via your R8168/R8169 network card. Also you have to select/specify a Synology serial number and MAC address in the menu. Oh really, why didn't I think of that *being sarcastic* of course Cable was in and I even tried 5 different router ports and rj45 cables, for some reason tcrp v0.9.4.9c and previous versions of M-Shell works fine) as for Menu it doesn't boot up if cannot load NIC driver Edited August 23, 2023 by dimakv2014 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted August 23, 2023 Share #600 Posted August 23, 2023 4 hours ago, maxime said: Does XPEnology (TinyCore RedPill Loader with M-Shell) support USB Nics? 😲🤔 Any loader supports usb network cards, in very first loaders there was a shortage with Network drivers and people used usb nics with supported chip to overcome this problem) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.