TheBlueVoice Posted July 4, 2013 Share #251 Posted July 4, 2013 Many thanks R.og! I'll let you know how I get on... Link to comment Share on other sites More sharing options...
andyl9063 Posted July 4, 2013 Share #252 Posted July 4, 2013 (edited) what version did you install? and what about usb support , wol, hdd hibernate? I have the n54l and i'm installing it right now. if you could, that would be great. thanks Hi! I'd also like to know how you got the hd's to spin down when idle as I've had no luck so far... So, like the chap above, I'd like to know what version, extra libs etc you used.. Thanks! Che This is the DSM version i used. https://drive.google.com/folderview?id= ... sp=sharing Here are the steps i used in my install, please let me know if it works. I will also try to duplicate my install on a different HD and usb stick to see if i can get everything working again. Also, i have only tested disk spindown without extra packages installed. 1. Change the Mac adress buy editing grub.conf located on the USB drive. viewtopic.php?f=2&t=910#p4226 2. Activate the WOL setting on your Ethernet adapter. viewtopic.php?f=2&t=665&p=3463&hilit=synoinfo.conf#p1919 3. Modify synoinfo.conf and replace S99ZZZ_Shutdown. viewtopic.php?f=2&t=665&p=3463&hilit=synoinfo.conf#p3312 4. Eject USB drive when system is booted. Disks should now spindown after preset time. thanks man. that did the trick. i'm not sure what step 3 and 4 does? is it for disk hibernation? have your n54l froze with synology yet? Edited July 4, 2013 by Guest Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2013 Share #253 Posted July 4, 2013 thanks man. that did the trick. i'm not sure what step 3 and 4 does? is it for disk hibernation? No problem, step 3 is for WOL. I mentioned step 4 because that is the only way i have been able to get the disk to spindown. Link to comment Share on other sites More sharing options...
elmuziko Posted July 5, 2013 Share #254 Posted July 5, 2013 Morning gents Massive thanks to the community for getting Syno on a ProLiant. I bought a DS212j for testing purposes, fell in love with the OS so got the N54L on the promise of slapping DSM on. Currently running 4.1 but about to put on 4.2 from https://drive.google.com/folderview?id= ... sp=sharing Anyway, my question is not about how to put it on or unlock hardware features but instead the cloud based programs within. I'd like to run DS Audio on my android phone but it looks like I need to register the Syno device in order to get a login ID. Is there away around this or is this the limitation of putting DSM on a Proliant? If it's not possible, anyone recommend any alternative? I use Google Play at the moment but it lacks a "view by folder" category and I'm more of an explorer user rather than a library. Finding tracks via artists/albums is more of a struggle than by folder. Thanks peeps. Link to comment Share on other sites More sharing options...
XPEH Posted July 5, 2013 Share #255 Posted July 5, 2013 I'd like to run DS Audio on my android phone but it looks like I need to register the Syno device in order to get a login ID. Is there away around this or is this the limitation of putting DSM on a Proliant? Synology registration is free and convenient dynamic DNS service. You can use any other supported DDNS services instead to find your DS from the internet and forward appropriate ports on your home firewall. Link to comment Share on other sites More sharing options...
mike_6480 Posted July 6, 2013 Share #256 Posted July 6, 2013 This is the DSM version i used. https://drive.google.com/folderview?id= ... sp=sharing Here are the steps i used in my install, please let me know if it works. I will also try to duplicate my install on a different HD and usb stick to see if i can get everything working again. Also, i have only tested disk spindown without extra packages installed. 1. Change the Mac adress buy editing grub.conf located on the USB drive. viewtopic.php?f=2&t=910#p4226 2. Activate the WOL setting on your Ethernet adapter. viewtopic.php?f=2&t=665&p=3463&hilit=synoinfo.conf#p1919 3. Modify synoinfo.conf and replace S99ZZZ_Shutdown. viewtopic.php?f=2&t=665&p=3463&hilit=synoinfo.conf#p3312 4. Eject USB drive when system is booted. Disks should now spindown after preset time. I have a few questions - I've been trying to do the above but no luck. How do you edit the file on the USB drive for step 1? How do you add files for step 3? Link to comment Share on other sites More sharing options...
jdpdata Posted July 6, 2013 Share #257 Posted July 6, 2013 I'd like to run DS Audio on my android phone but it looks like I need to register the Syno device in order to get a login ID. Is there away around this or is this the limitation of putting DSM on a Proliant? Synology registration is free and convenient dynamic DNS service. You can use any other supported DDNS services instead to find your DS from the internet and forward appropriate ports on your home firewall. As an alternative, you can run Plex Server on your Syno and port forward an open port on your router. I'm streaming my entire Audio/Video collection flawlessly to all my mobile devices. Link to comment Share on other sites More sharing options...
Guest Posted July 6, 2013 Share #258 Posted July 6, 2013 This is the DSM version i used. https://drive.google.com/folderview?id= ... sp=sharing Here are the steps i used in my install, please let me know if it works. I will also try to duplicate my install on a different HD and usb stick to see if i can get everything working again. Also, i have only tested disk spindown without extra packages installed. 1. Change the Mac adress buy editing grub.conf located on the USB drive. viewtopic.php?f=2&t=910#p4226 2. Activate the WOL setting on your Ethernet adapter. viewtopic.php?f=2&t=665&p=3463&hilit=synoinfo.conf#p1919 3. Modify synoinfo.conf and replace S99ZZZ_Shutdown. viewtopic.php?f=2&t=665&p=3463&hilit=synoinfo.conf#p3312 4. Eject USB drive when system is booted. Disks should now spindown after preset time. I have a few questions - I've been trying to do the above but no luck. How do you edit the file on the USB drive for step 1? How do you add files for step 3? The easiest way is to use Winscp. You will have to login as root using the same password for the admin account Link to comment Share on other sites More sharing options...
elmuziko Posted July 10, 2013 Share #259 Posted July 10, 2013 Thanks mike_6480 and jdpdata, The built in DDNS isn't working for me so will try the plex server. Thanks again Link to comment Share on other sites More sharing options...
hanspeter Posted July 10, 2013 Share #260 Posted July 10, 2013 Hey, I am glad to have You to ask for solutions to my fiddelings. 1. WOL on my new N54L worked right out of the box (4.2 - 3211 Microserver Version) but, after a while, lets say 30 minutes, I can't wake it anymore. Does anyone can give me a hint what is the matter here? 2. Opposite to my PC, my ESATA port does not work. I dont even get it as an internal port. Is that normal and has to be fixed by changing the port number? Thanks a lot!!! Hans Link to comment Share on other sites More sharing options...
quicksilver Posted July 12, 2013 Share #261 Posted July 12, 2013 I've built a few boxes using N54Ls and so far they are working great! However, I was just sent this link and I thought I should share: http://www.wilderssecurity.com/showt...19#post2238519 Well , if anything looks to good to be true... A few weeks ago I surfed past this site -http://www.xpenology.com-. I had an old WHS lying around, and well I like to tweak computers , so I gave it a try. After some tweaking I found my old WHS was running as a real Synology NAS ;D ;D ;D ... Nicely done I thought.....:gack: Well you guys probably allready know where this is going... It turned out I installed A gaping backdoor on to my network, and they got in.... I have no idea how long they have been looking around or what they did, but it scares me. Pretty scary IF it's true but that's a big IF. This guy goes not say which build he's used. I've tried to get to the xpenology site to see if anything was posted there but it seems to be down. Although it's pretty unlikely this is true, I thought that I should investigate/post all the same. I've checked my own firewall monitors for the last week. My two newest SynoloHacs x.x.x.190 and x.x.x.180 are not making may calls to the outside world. I would have expected more traffic if there was a problem but I've not yet tracked down all the places it's tried to reach. x.x.x.180 api.github.com https 443 TCP Default 355.71 KB <1% x.x.x.180 91-121-40-14.ovh.net http 80 TCP Default 108.19 KB <1% x.x.x.180 hermes.10trum.de http 80 TCP Default 88.64 KB <1% x.x.x.180 60-251-87-136.hinet-ip.hinet.net https 443 TCP Default 28.75 KB <1% x.x.x.180 vserver49.axc.nl http 80 TCP Default 15.63 KB <1% x.x.x.180 lvps5-35-244-237.dedicated.hosteurope.de http 80 TCP Default 13.27 KB <1% x.x.x.180 wa3.rzone.de http 80 TCP Default 12.34 KB <1% x.x.x.180 546bcd0c.cm-12-4d.dynamic.ziggo.nl http 80 TCP Default 9.88 KB <1% x.x.x.180 192.30.252.137 https 443 TCP Default 9.45 KB <1% x.x.x.180 imu307.infomaniak.ch http 80 TCP Default 8.48 KB <1% x.x.x.180 ns395541.ovh.net http 80 TCP Default 1.47 KB <1% github seems ok... prob an update check 91-121-40-14.ovh.net... synocommunity hermes.10trum.de... ? 60-251-87-136.hinet-ip.hinet.net.. ? vserver49.axc.nl.. ? lvps5-35-244-237.dedicated.hosteurope.de.. Pantofflhelden? wa3.rzone.de..? 546bcd0c.cm-12-4d.dynamic.ziggo.nl.. ? https://192.30.252.137/..? imu307.infomaniak.ch..? ns395541.ovh.net... Wombles NZB index the other box (190) x.x.x.190 31-6-72-106.the.ccsleeds.co.uk https 443 TCP Default 1.57 MB <1% x.x.x.190 91-121-40-14.ovh.net http 80 TCP Default 476.93 KB <1% x.x.x.190 api.github.com https 443 TCP Default 226.82 KB <1% x.x.x.190 hermes.10trum.de http 80 TCP Default 94.03 KB <1% x.x.x.190 60-251-87-136.hinet-ip.hinet.net https 443 TCP Default 29.44 KB <1% x.x.x.190 52493be6.cm-4-2a.dynamic.ziggo.nl http 80 TCP Default 8.19 KB <1% x.x.x.190 192.30.252.139 https 443 TCP Default 8.17 KB <1% x.x.x.190 ns395541.ovh.net http 80 TCP Default 4.31 KB <1% x.x.x.190 199.27.76.133 http 80 TCP Default 2.49 KB <1% x.x.x.190 103.245.223.196 http 80 TCP Default 2.39 KB <1% 31-6-72-106.the.ccsleeds.co.uk... Synology cloud service 91-121-40-14.ovh.net.. Syno Community api.github.com... git hermes.10trum.de... ? 60-251-87-136.hinet-ip.hinet.net..? 52493be6.cm-4-2a.dynamic.ziggo.nl..? 192.30.252.13.. ? ns395541.ovh.net... Wombles NZB index 199.27.76.133.. github 103.245.223.196.. github Chris Link to comment Share on other sites More sharing options...
gizmomelb Posted July 14, 2013 Share #262 Posted July 14, 2013 what is the best, recommended version for an N36L with 2GB of RAM please? There are so many builds, is there a 'definitive' build for HP Microservers with full USB support etc. please? thank you. Link to comment Share on other sites More sharing options...
LightStar Posted July 15, 2013 Share #263 Posted July 15, 2013 I've built a few boxes using N54Ls and so far they are working great! However, I was just sent this link and I thought I should share: http://www.wilderssecurity.com/showt...19#post2238519 Well , if anything looks to good to be true... A few weeks ago I surfed past this site -http://www.xpenology.com-. I had an old WHS lying around, and well I like to tweak computers , so I gave it a try. After some tweaking I found my old WHS was running as a real Synology NAS ;D ;D ;D ... Nicely done I thought.....:gack: Well you guys probably allready know where this is going... It turned out I installed A gaping backdoor on to my network, and they got in.... I have no idea how long they have been looking around or what they did, but it scares me. Pretty scary IF it's true but that's a big IF. This guy goes not say which build he's used. I've tried to get to the xpenology site to see if anything was posted there but it seems to be down. Although it's pretty unlikely this is true, I thought that I should investigate/post all the same. I've checked my own firewall monitors for the last week. My two newest SynoloHacs x.x.x.190 and x.x.x.180 are not making may calls to the outside world. I would have expected more traffic if there was a problem but I've not yet tracked down all the places it's tried to reach. x.x.x.180 api.github.com https 443 TCP Default 355.71 KB <1% x.x.x.180 91-121-40-14.ovh.net http 80 TCP Default 108.19 KB <1% x.x.x.180 hermes.10trum.de http 80 TCP Default 88.64 KB <1% x.x.x.180 60-251-87-136.hinet-ip.hinet.net https 443 TCP Default 28.75 KB <1% x.x.x.180 vserver49.axc.nl http 80 TCP Default 15.63 KB <1% x.x.x.180 lvps5-35-244-237.dedicated.hosteurope.de http 80 TCP Default 13.27 KB <1% x.x.x.180 wa3.rzone.de http 80 TCP Default 12.34 KB <1% x.x.x.180 546bcd0c.cm-12-4d.dynamic.ziggo.nl http 80 TCP Default 9.88 KB <1% x.x.x.180 192.30.252.137 https 443 TCP Default 9.45 KB <1% x.x.x.180 imu307.infomaniak.ch http 80 TCP Default 8.48 KB <1% x.x.x.180 ns395541.ovh.net http 80 TCP Default 1.47 KB <1% github seems ok... prob an update check 91-121-40-14.ovh.net... synocommunity hermes.10trum.de... ? 60-251-87-136.hinet-ip.hinet.net.. ? vserver49.axc.nl.. ? lvps5-35-244-237.dedicated.hosteurope.de.. Pantofflhelden? wa3.rzone.de..? 546bcd0c.cm-12-4d.dynamic.ziggo.nl.. ? https://192.30.252.137/..? imu307.infomaniak.ch..? ns395541.ovh.net... Wombles NZB index the other box (190) x.x.x.190 31-6-72-106.the.ccsleeds.co.uk https 443 TCP Default 1.57 MB <1% x.x.x.190 91-121-40-14.ovh.net http 80 TCP Default 476.93 KB <1% x.x.x.190 api.github.com https 443 TCP Default 226.82 KB <1% x.x.x.190 hermes.10trum.de http 80 TCP Default 94.03 KB <1% x.x.x.190 60-251-87-136.hinet-ip.hinet.net https 443 TCP Default 29.44 KB <1% x.x.x.190 52493be6.cm-4-2a.dynamic.ziggo.nl http 80 TCP Default 8.19 KB <1% x.x.x.190 192.30.252.139 https 443 TCP Default 8.17 KB <1% x.x.x.190 ns395541.ovh.net http 80 TCP Default 4.31 KB <1% x.x.x.190 199.27.76.133 http 80 TCP Default 2.49 KB <1% x.x.x.190 103.245.223.196 http 80 TCP Default 2.39 KB <1% 31-6-72-106.the.ccsleeds.co.uk... Synology cloud service 91-121-40-14.ovh.net.. Syno Community api.github.com... git hermes.10trum.de... ? 60-251-87-136.hinet-ip.hinet.net..? 52493be6.cm-4-2a.dynamic.ziggo.nl..? 192.30.252.13.. ? ns395541.ovh.net... Wombles NZB index 199.27.76.133.. github 103.245.223.196.. github Chris Someone else allready checked this ? i just build a new box and want to run DSM but if this is true i'm gonna run something else. Link to comment Share on other sites More sharing options...
mrchris76 Posted July 15, 2013 Share #264 Posted July 15, 2013 Someone else allready checked this ? i just build a new box and want to run DSM but if this is true i'm gonna run something else. I am not worried about this, I personally doubt there is a security issue with running DSM on non-syno hardware. I'd suspect that guy got hacked via some other unrelated method. just my 2c. Link to comment Share on other sites More sharing options...
Schnapps Posted July 15, 2013 Share #265 Posted July 15, 2013 Hi, you seem quite experienced. There is already a thread in regards to a Trojan horse in xpenology. Please go to viewtopic.php?f=2&t=951#p4652 Thanks Link to comment Share on other sites More sharing options...
mrchris76 Posted July 15, 2013 Share #266 Posted July 15, 2013 If there is some sort of trojan or root kit in this then we're all fcked however, I keep a close eye on network traffic going into and out of my network and haven't seen anything that would cause me to worry. I don't expose any network ports from my HP N40L to the internet anyway. If it was root kitted (hey anything is possible!) then yeah I'm not likely to see anything dodgy using the tools on the box anyway. For now I am going to continue enjoying DSM on my HP N40L! It is awesome. -mrchris76 Link to comment Share on other sites More sharing options...
newbi Posted July 15, 2013 Share #267 Posted July 15, 2013 Hi all. I am new to all this(oh no not another one) Can I ask two things. 1-Can I leave the USB stick out after the install and boot from the 2.5 hd? 2-Can any USB keyboard be used on the N54L Thank you to Nighthawk for working on the port. Link to comment Share on other sites More sharing options...
pameijer Posted July 16, 2013 Share #268 Posted July 16, 2013 Hi, is anyone using NFS exports on their N40? I tested with the VMware image and the NFS worked fine. On the N40, the exports show up but cannot be accessed. I've tried editing the exports file but still no joy-settings the same as the way I set up on the VM. The only difference is that I'm running the N40 DSM image instead of the generic one.Can anyone help? Everything else is working perfectly. Thanks in advance. I am having the exact same problem. The NFS-shares show up in XBMC and on my Windows machine, but they are not accessible because of rights. I set up my NAS following this wiki. When I ssh to my Apple TV with XBMC running: atv@crystalbuntu:~$ sudo showmount -e 192.168.178.9 Export list for 192.168.178.9: /volume1/video * /volume1/photo * /volume1/music * All seems well..... But when I try to access it via XBMC, the log says the following: 14:39:36 T:3008325440 ERROR: GetDirectory - Error getting nfs://192.168.178.9/volume1/video/ 14:39:36 T:3008325440 ERROR: CGUIDialogFileBrowser::GetDirectory(nfs://192.168.178.9/volume1/video/) failed 14:39:39 T:2745158464 DEBUG: NFS: Refreshing context for 192.168.178.9/volume1/video, old: 330196128, new: 330199174 14:39:39 T:2745158464 DEBUG: NFS: Using cached context. 14:39:39 T:2745158464 ERROR: Failed to open(//) opendir call failed with "Server responded: Program not available" 14:39:39 T:3008325440 ERROR: GetDirectory - Error getting nfs://192.168.178.9/volume1/video/ 14:39:39 T:3008325440 ERROR: CGUIDialogFileBrowser::GetDirectory(nfs://192.168.178.9/volume1/video/) failed 14:39:50 T:2973453120 DEBUG: Suspended the Sink 14:40:09 T:2745158464 DEBUG: Thread Jobworker 2745158464 terminating (autodelete) 14:40:40 T:2879372096 NOTICE: ES: Client from 127.0.0.1 timed out 14:41:10 T:3008325440 NOTICE: NFS is idle. Closing the remaining connections. But the rights should be good on the HP N54L: DiskStation> cat /etc/exports /volume1/music *(rw,async,no_wdelay,no_root_squash,insecure,anonuid=0,anongid=0) /volume1/photo *(rw,async,no_wdelay,no_root_squash,insecure,anonuid=0,anongid=0) /volume1/video *(rw,async,no_wdelay,no_root_squash,insecure,anonuid=0,anongid=0) More info: /home/atv$ dpkg --list | grep nfs ii libnfs1 1.3.0-2~ppa1~precise NFS client library (shared library) ii libnfsidmap2 0.25-1ubuntu2 NFS idmapping library ii nfs-common 1:1.2.5-3ubuntu3.1 NFS support files common to client and server DiskStation> rpcinfo -p program vers proto port service 100000 4 tcp 111 100000 3 tcp 111 100000 2 tcp 111 100000 4 udp 111 100000 3 udp 111 100000 2 udp 111 100005 1 udp 892 100005 1 tcp 892 100005 2 udp 892 100005 2 tcp 892 100005 3 udp 892 100005 3 tcp 892 100024 1 udp 52634 100024 1 tcp 47944 The services are not labelled on the DiskStation, is that a problem? From the XBMC: atv@crystalbuntu:~$ rpcinfo -p 192.168.178.9 program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 892 mountd 100005 1 tcp 892 mountd 100005 2 udp 892 mountd 100005 2 tcp 892 mountd 100005 3 udp 892 mountd 100005 3 tcp 892 mountd 100024 1 udp 52634 status 100024 1 tcp 47944 status I read on this forum this article, but no luck following those instructions. Is NFS just broken on the ported DSM on an HP N54L? Are more people having this issue? Link to comment Share on other sites More sharing options...
unmesh Posted July 16, 2013 Share #269 Posted July 16, 2013 Hi all. I am new to all this(oh no not another one) Can I ask two things. 1-Can I leave the USB stick out after the install and boot from the 2.5 hd? 2-Can any USB keyboard be used on the N54L Thank you to Nighthawk for working on the port. You have to boot from the USB stick. Several USB keyboards have worked for me so I suspect keyboard support is pretty broad. Link to comment Share on other sites More sharing options...
newbi Posted July 16, 2013 Share #270 Posted July 16, 2013 Hi all. I am new to all this(oh no not another one) Can I ask two things. 1-Can I leave the USB stick out after the install and boot from the 2.5 hd? 2-Can any USB keyboard be used on the N54L Thank you to Nighthawk for working on the port. You have to boot from the USB stick. Several USB keyboards have worked for me so I suspect keyboard support is pretty broad. Thanks for the help. I got it installed now with the 250GB HD but when I added another 2TG HD it won't let me format it! Do I need to put the drives in before I install XPEnology (hope not) thanks again. Link to comment Share on other sites More sharing options...
unmesh Posted July 16, 2013 Share #271 Posted July 16, 2013 Hi all. I am new to all this(oh no not another one) Can I ask two things. 1-Can I leave the USB stick out after the install and boot from the 2.5 hd? 2-Can any USB keyboard be used on the N54L Thank you to Nighthawk for working on the port. You have to boot from the USB stick. Several USB keyboards have worked for me so I suspect keyboard support is pretty broad. Thanks for the help. I got it installed now with the 250GB HD but when I added another 2TG HD it won't let me format it! Do I need to put the drives in before I install XPEnology (hope not) thanks again. You can add drives after the initial install. Does the new drive show up in the BIOS messages during boot or in BIOS setup? Link to comment Share on other sites More sharing options...
newbi Posted July 17, 2013 Share #272 Posted July 17, 2013 OK I got it to format and it says all is ok I just put 60GB of files to test they are all there but in storage Monitor it says only 240MB has been used. I must be doing something wrong but what it is I can't find out. Got to do it from scratch and see that helps. I am used to synology as I had a DS211j. Ok using the files from here https://drive.google.com/folderview?id= ... sp=sharing it's up and running Does any body know if I should install the 4.2 modules posted by Nighthawk? thanks Link to comment Share on other sites More sharing options...
unmesh Posted July 17, 2013 Share #273 Posted July 17, 2013 Does any body know if I should install the 4.2 modules posted by Nighthawk? thanks The modules allowed me to use external USB drives and my USB-connected UPS to work. If that functionality is useful to you, install them. Link to comment Share on other sites More sharing options...
smccloud Posted July 18, 2013 Share #274 Posted July 18, 2013 I've got this running on my N40L and it works great other than a couple of issues. After installing Nighthawk's modules I lost the ability to see my USB printer that is connected to my N40L (worked fine before that). Installed Nighthawk's modules to get my USB UPS working, still can't see that. My SiL3132 PCIe eSATA card doesn't work Otherwise, its working great. Flashed a hacked BIOS and I can use the 4 internal "hot swap" bays as well as a hot swap bay I have in the 5.25" bay. I still have 2 more HDDs I'd like to attach but I will be happy if I can get just one attached (they are in a Sans Digital PM eSATA tower). Link to comment Share on other sites More sharing options...
Schnapps Posted July 18, 2013 Share #275 Posted July 18, 2013 I've got this running on my N40L and it works great other than a couple of issues. After installing Nighthawk's modules I lost the ability to see my USB printer that is connected to my N40L (worked fine before that). Installed Nighthawk's modules to get my USB UPS working, still can't see that. My SiL3132 PCIe eSATA card doesn't work Otherwise, its working great. Flashed a hacked BIOS and I can use the 4 internal "hot swap" bays as well as a hot swap bay I have in the 5.25" bay. I still have 2 more HDDs I'd like to attach but I will be happy if I can get just one attached (they are in a Sans Digital PM eSATA tower). try this: http://xpenology.com/forum/viewtopic.php?f=2&t=915#p4292 Link to comment Share on other sites More sharing options...
Recommended Posts