Jump to content
XPEnology Community


Global Moderators
  • Posts

  • Joined

  • Last visited

Everything posted by Schnapps

  1. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: ESXi 6.7 (1 vDisk, thick provisioned on a WD30EFRX) see disk setup below - Additional comments: No issues for the past 6hrs
  2. A thousand thumbs up! More to come after the loader is released
  3. Take Jun's latest loader (v1.02a2), write it to an USB flash and try again but with the 6.1 DS3617xs latest .pat file My suggestion is to restore all configurations to factory settings (and keep the data). This worked for me
  4. Thanks man! Installed it on my 6.1@ESX6.5
  5. Just upgraded my ESXi6.5-based XPEnology to 6.1 and I'm looking for the Open-VM Tools for Broadwell arch as the Bromollow one is not compatible.
  6. Schnapps

    DSM 6.1.x Loader

    Because lots of guys want Plex transcoding for multiple clients in the same time
  7. Do you have the Open-VM-tools installed? Sent from my iPhone using Tapatalk
  8. I did. Not working. Probably missing nw drivers Sent from my iPhone using Tapatalk
  9. Schnapps

    DSM 6.1.x Loader

    Indeed. As we speak! Not sure all the source code is included though looking at the size of the source. We shall wait they finish the uploads. Apparently they're done. As far as I see, all the sources we need are available. Synology also made a Docker/KVM package/image available, so I was thinking, maybe it would be possible to use a baseline Linux distro with Docker/KVM, and run it inside that? That way most of the hackery to get around their security wouldn't be needed. That would rock, but I guess they locked it to run only on DSM. Need some Elder Geek to check if it's doable
  10. That's great medric! I could test, if needed
  11. Oh cool, so do they just upload their footage to the cloud or do they have internal storage you can access too? Yeah, currently all recordings are in their (free) cloud. They announced the feature to add local USB storage to the sync module a year ago but didn't really know if they added it. I never needed it and never tried it, but seems that it's still not implemented (https://blinkinfo.desk.com/customer/en/ ... ge-option-) Still, if you think twice, it has a good logic to not care if somebody breaks in and steals your whole system to cover their tracks. The recordings are safe Anyhow, I have about 5-6 friends and colleagues owning Blinks and they're extremely satisfied with what it does and how it does it!
  12. See Synology's original website https://www.synology.com/en-global/compatibility/camera Just be aware that the J1900 is not a powerful processor and it might not handle all the camera streams you want. Thanks, yeah I'm not looking for anything too extreme, just wanna keep an eye on my apartment when not home, maybe a secondary one to watch package deliveries at most, I'll look over the list, if anyone has a first hand recommendation feel free to convey I got rid of Syno cams and replaced them with a Blink for Home system (https://blinkforhome.com/). They're just awesome for the average Joe in need for a basic but smart camera security system. They're so cool that I put them anywhere without pulling wires and the battery lasts for 1 year at least. I basically got them almost 1 year ago and they don't seem to be 1/4 depleted. Just that they don't record all the time, but when they see movement, and only in 60 sec movies, followed by a min 5sec wait time, but as I said, enough for the average Joe. Check them on Amazon too: https://www.amazon.com/blink-home-secur ... Arelevance
  13. See Synology's original website https://www.synology.com/en-global/compatibility/camera Just be aware that the J1900 is not a powerful processor and it might not handle all the camera streams you want.
  14. Schnapps

    DSM 6.1.x Loader

    I've rebased the vendor changes on 3.10.77 to 3.10.102, seems still works. Update for 6.1 loader at https://mega.nz/#F!18kB1BTB!1ft3N5Hnrcn ... A!5kcjyJ7R THANKS Jun!
  15. Did you try to convert the VMware image to Hyper-V and give it a try? I have had a ton of different VMware images ive converted and worked fine, always worth a shot in the name of SCIENCE! Not working. The loader needs the Hyper-V integration drivers. Mostly for the network part. Sent from my iPhone using Tapatalk
  16. 3rd world problems ) Dude, you have a problem if that tiny thing is bugging you. Sent from my iPhone using Tapatalk
  17. This is a very long and old topic. DSM is using all cores it has just that the System Information is showing in the CPU info tab the CPU as i3 and with 2 cores. That info is hardcoded in DSM for the XS3615+ model Sent from my iPhone using Tapatalk
  18. I'm getting bored here Sent from my iPhone using Tapatalk
  19. I tried converting most of images that were created for Hyper-V and none work (as iso or vhdx) under Hyper-V. Unfortunately, I didn't had too much time to test all image versions and all tricks but I still have hope...
  20. Don't use purple WDs for NAS workloads. Period! Check this thread: https://forum.synology.com/enu/viewtopic.php?t=85809 Sent from my iPhone using Tapatalk
  21. Acivate Jumbo Frames? Sent from my iPhone using Tapatalk
  22. Q1900-ITX is one of the most used mainboards for xpenology. Even my main xpenology NAS is build on it so lots of folks could reply to this thread but the thing is nobody comes to the forum once they've setup their systems I have no problems with Plex, but on the other hand, I'm using it just on one device at a time and not a chromecast Sent from my iPhone using Tapatalk
  23. Look for threads in this forum to see how you can downgrade to v5.2 Sent from my iPhone using Tapatalk
  • Create New...