blindspot Posted April 13, 2022 Share #2451 Posted April 13, 2022 10 minutes ago, pocopico said: OK, can you please change to SataPortMap=5 and add sata_remap="5>0" and send me the output of fdisk again ? Same sde DiskStation> fdisk -l Disk /dev/sde: 932 GB, 1000204886016 bytes, 1953525168 sectors Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sde1 0,0,2 1023,255,63 1 4294967295 4294967295 2047G ee EFI GPT Disk /dev/synoboot: 3700 MB, 3879731200 bytes, 7577600 sectors Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/synoboot1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux /dev/synoboot2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux /dev/synoboot3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux this is usb config linux /zImage withefi earlyprintk syno_hw_version=DS3617xs console=ttyS0,115200n8 netif_num=1 pid=0x4100 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=XXX sn=XXX vid=0x13fe elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=5 Sata_Remap="5>0" Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2452 Posted April 13, 2022 (edited) 1 minute ago, blindspot said: Same sde DiskStation> fdisk -l Disk /dev/sde: 932 GB, 1000204886016 bytes, 1953525168 sectors Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sde1 0,0,2 1023,255,63 1 4294967295 4294967295 2047G ee EFI GPT Disk /dev/synoboot: 3700 MB, 3879731200 bytes, 7577600 sectors Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/synoboot1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux /dev/synoboot2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux /dev/synoboot3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux this is usb config linux /zImage withefi earlyprintk syno_hw_version=DS3617xs console=ttyS0,115200n8 netif_num=1 pid=0x4100 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=XXX sn=XXX vid=0x13fe elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=5 Sata_Remap="5>0" well NO its all lowercase just like i typed it Edited April 13, 2022 by pocopico 1 Quote Link to comment Share on other sites More sharing options...
blindspot Posted April 13, 2022 Share #2453 Posted April 13, 2022 3 minutes ago, pocopico said: well NO its all lowercase just like i typed it Still the same. Thank you for your patience @pocopico Quote Link to comment Share on other sites More sharing options...
mitch55 Posted April 13, 2022 Share #2454 Posted April 13, 2022 il y a 2 minutes, pocopico a dit : you need to create pointers and add these pointer files as hard drives. to create pointers - > https://gist.github.com/Hengjie/1520114890bebe8f805d337af4b3a064 Put your pointers to the local datastore Thanks for your answer. It is already done : After having launch my VM, I can find my Synology, run the migration but after reboot, I can access to my syno, I can just make the migration ... again. Quote Link to comment Share on other sites More sharing options...
muziling Posted April 13, 2022 Share #2455 Posted April 13, 2022 On 4/4/2022 at 9:18 PM, Peter Suh said: With the help of @dolbycat, I finally succeeded in installing DS918+ 7.1 RC. The following is the installation method. Realtek NIC and HBA cards are not recognized. You should only proceed with Intel NIC and internal/external SATA. 1. Download pocopico or RedwinX Redfill-Load GitHub to a separate Linux. It can be built in the Xubuntu OVA shared above with Google Drive before. https://drive.google.com/file/d/19XwxRTDcJwMPlJ7gLQIr9argi_jeSTtE/view user id : toolc / pass word : P@ssw0rd git clone https://github.com/RedwinX/redpill-load.git or git clone https://github.com/pocopico/redpill-load.git 2.Prepare user_config.json for DS918+ 3. After adjusting the chmod +x authority, Create a /buildpat folder in the root and copy the Shell file. running /buildpat# ./buildpat-918p-7.1-42621.sh for unencrypted ds918p_42621.pat recreate. 4. Move the regenerated ds918p_42621.pat file to the cache folder. /redpill-load/buildpat# mv ds918p_42621.pat ../cache 5. config.json SHA256 Value Calibration for DS918+ 7.1 RC /redpill-load/config/DS918+/7.1-42621# vi config.json "os": { "id": "ds918p_42621", "pat_url": "https://global.download.synology.com/download/DSM/release/7.1/42621/DSM_DS918%2B_42621.pat", "sha256": "e7fa975757d5faa6a275b68b130e7fd552263157a39bc71507ea6f2f466bb359" --> Change to "sha256": 63a7b5bcdb23a8a4b4586e0d41f9dc95d62ca4d64bfe7baffa9323e531e77954" }, 6. Forced injection of redfill-linux-v4.4.180+.ko file (lkm compilation omitted) Copy to /redpil-load/ext/rp-lkm directory After downloading the file in the following path, rename the decompressed redpill.ko. https://github.com/pocopico/rp-ext/blob/main/redpill/releases/redpill-4.4.180plus.tgz or You can download it directly from this link. https://drive.google.com/file/d/1HF-q5YbUcp0vZ57qV3zE7zAQxbERvdvg/view?usp=sharing 7. Build DS918 Bootloader Image /redpill-load# ./build-loader.sh DS918+ 7.1-42621 8. Check the built image, copy the LOCAL PC, and record the USB. *.img result exists in /redpil-load/images directory Does this work on DS918+ 7.1-42661? Had replace all string 42621 to 42661 in script buildpat-918p-7.1-42621.s h and finally generate loader image. Use this loader and boot to dsm install web page, first need to format disk, format failed at install page step. Switch to use old dsm 7.0 loader, format disk success. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2456 Posted April 13, 2022 1 minute ago, mitch55 said: Thanks for your answer. It is already done : After having launch my VM, I can find my Synology, run the migration but after reboot, I can access to my syno, I can just make the migration ... again. To see why the install fails, you need to telnet and see what is the reason for failing in /var/log/junior_reason and also post the contents of /var/log/*rc* 2 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2457 Posted April 13, 2022 (edited) 21 minutes ago, blindspot said: Still the same. Thank you for your patience @pocopico Can you also try : sata_remap="0>5:5>0" A good reading to further understand what you are doing : https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/ and a reference of all options : https://github.com/cake654326/xpenology/blob/master/synoconfigs/Kconfig.devices so in your case, and i dont know if that works i would try to add DiskSeqReverse=5 Edited April 13, 2022 by pocopico 1 1 Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 13, 2022 Share #2458 Posted April 13, 2022 5 hours ago, Dreadnought said: I have to connect via telnet and execute the following command: sudo /usr/syno/lib/systemd/scripts/syno-kernel-modules-load.sh I will these option as well as soon as I am able to do so. For me this approach works fine! I only had to comment one entry: crc32c-intel The second one had already # in front of the line. cat /lib/modules-load.d/70-crypto-kernel.conf cbc md5 cts ansi_cprng des_generic authenc aes-x86_64 ecb sha256_generic cryptd # crc32c-intel arc4 /lib/modules-load.d/70-cpufreq-kernel.conf cpufreq_stats processor # acpi-cpufreq cpufreq_performance cpufreq_powersave Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2459 Posted April 13, 2022 Just now, Dreadnought said: For me this approach works fine! I only had to comment one entry: crc32c-intel The second one had already # in front of the line. cat /lib/modules-load.d/70-crypto-kernel.conf cbc md5 cts ansi_cprng des_generic authenc aes-x86_64 ecb sha256_generic cryptd # crc32c-intel arc4 /lib/modules-load.d/70-cpufreq-kernel.conf cpufreq_stats processor # acpi-cpufreq cpufreq_performance cpufreq_powersave yes, i did some changes on redpill-misc. Its should take care most of the HW limitations and editing of these files. Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 13, 2022 Share #2460 Posted April 13, 2022 1 minute ago, pocopico said: yes, i did some changes on redpill-misc. Its should take care most of the HW limitations and editing of these files. But I don't updated the loader for 3 days. So how should your fix come to my files? Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2461 Posted April 13, 2022 1 minute ago, Dreadnought said: But I don't updated the loader for 3 days. So how should your fix come to my files? HAHAHA indeed, talking about future builds 1 Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 13, 2022 Share #2462 Posted April 13, 2022 (edited) With latest updates to the redpill loader I sucessfully installed and updated a N54L to DS3622xs+ DSM 7.1, cudos Edited April 13, 2022 by djvas335 1 Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 13, 2022 Share #2463 Posted April 13, 2022 when I try to access IP:7681 the connect is flapping. Every second I get the message that the connection is closed. Maybe I need here an update of the misc module? Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 13, 2022 Share #2464 Posted April 13, 2022 Steps to update a Microserver N54L to DS3622xs+ latest DSM 7.1, confirmed working [DS3622xs+] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build broadwellnk-7.0.1-42218 ./rploader.sh clean now ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; 6 1 Quote Link to comment Share on other sites More sharing options...
zahni Posted April 13, 2022 Share #2465 Posted April 13, 2022 10 minutes ago, djvas335 said: Steps to update a Microserver N54L to DS3622xs+ latest DSM 7.1, confirmed working [DS3622xs+] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build broadwellnk-7.0.1-42218 ./rploader.sh clean now ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Did you do the upgrade to 7.1 inside DSM running on 7.0.1 and then reboot into the TC build mode ? Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 13, 2022 Share #2466 Posted April 13, 2022 Nop, I actually migrated directly from DS3615xs 7.0.1, Built the loader and then installed the PAT, my install was actually broken as I updated one of my data servers and it started to shutdown after boot, however latest redpill update fixed it, I just rebuilt the loader and it fixed the shutdown issue 3 minutes ago, zahni said: Did you do the upgrade to 7.1 inside DSM running on 7.0.1 and then reboot into the TC build mode ? 1 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted April 13, 2022 Share #2467 Posted April 13, 2022 23 minutes ago, djvas335 said: Steps to update a Microserver N54L to DS3622xs+ latest DSM 7.1, confirmed working [DS3622xs+] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build broadwellnk-7.0.1-42218 ./rploader.sh clean now ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Hi whats are the steps for fresh install ???? thank you Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 13, 2022 Share #2468 Posted April 13, 2022 Same steps my friend 2 minutes ago, nemesis122 said: Hi whats are the steps for fresh install ???? thank you 1 Quote Link to comment Share on other sites More sharing options...
mitch55 Posted April 13, 2022 Share #2469 Posted April 13, 2022 (edited) il y a 35 minutes, djvas335 a dit : ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Thanks to you. Since yesterday, I have tried to update... Just a little thing, why my volume 1 is made with disk 12 and 13 ? Why not 1 et 2? @pocopico, I have deleted my VM, recreated it and followed indications of @djvas335. Thanks to you too. Edited April 13, 2022 by mitch55 Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 13, 2022 Share #2470 Posted April 13, 2022 Don't thank me, as I wrote earlier, pocopico updated the redpill-load, which made this possible, I was just fixing my broken Microserver install, so its pocopico you should be thanking, I didn't do anything 3 minutes ago, mitch55 said: Thanks to you. Since yesterday, I try to update... Just a little thing, why my volume 1 is made with disk 12 and 13 ? Why not 1 et 2? @pocopico, I have deleted my VM, recreated it and followed indications of @djvas335. Thanks to you too. Quote Link to comment Share on other sites More sharing options...
mitch55 Posted April 13, 2022 Share #2471 Posted April 13, 2022 You're right and I have done it. Have you the same thing than me? with disk 12 and 13? Maybe, I should delete the lines with SataPortMap et DiskIdxMap... Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2472 Posted April 13, 2022 10 minutes ago, mitch55 said: Thanks to you. Since yesterday, I have tried to update... Just a little thing, why my volume 1 is made with disk 12 and 13 ? Why not 1 et 2? @pocopico, I have deleted my VM, recreated it and followed indications of @djvas335. Thanks to you too. Is this virtual or physical ? Also what is your SataPortMap Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 13, 2022 Share #2473 Posted April 13, 2022 (edited) Sorry, mine is like this, yours is definitely an issue in satamap Edited April 13, 2022 by djvas335 Wrong quote Quote Link to comment Share on other sites More sharing options...
mitch55 Posted April 13, 2022 Share #2474 Posted April 13, 2022 il y a 8 minutes, pocopico a dit : Is this virtual or physical ? Also what is your SataPortMap Physical SataPortMap=1 DiskIdxMap=00 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2475 Posted April 13, 2022 1 minute ago, mitch55 said: Physical SataPortMap=1 DiskIdxMap=00 you have nore than one controller then ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.