RedCat Posted April 12, 2022 Share #2376 Posted April 12, 2022 I try to install under proxmox 920+ with 7.1.0. Loader is booting, find.synology.com find the 920+. I click connect, the next screen is: Dont detect hard drive in DS920+. 918 and 3622xs works for me under proxmox with 7.1 What is wrong? Quote Link to comment Share on other sites More sharing options...
RedCat Posted April 12, 2022 Share #2377 Posted April 12, 2022 9 hours ago, pocopico said: fixed. It was unsuccessful Quote Link to comment Share on other sites More sharing options...
Alekc Posted April 12, 2022 Share #2378 Posted April 12, 2022 3 часа назад, MSXGames сказал: Check if yout ime setting are okay. I had this issue once, when done a time setting all was fine. You can use the sync button. Thank you! It works fine now. 1 Quote Link to comment Share on other sites More sharing options...
Alekc Posted April 12, 2022 Share #2379 Posted April 12, 2022 Does anybody know hot to run hw transcoding on DS918+ system? I have baremetal installation DSM 7.1 and cpu i5 8400. And also have no some thumbnails generated for video files in Photo & DS video station in logs I have seen such error " System failed to convert video [/volume2/photo/test/00063.MTS] to mpeg4." Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2380 Posted April 12, 2022 1 hour ago, ulissessantos said: Please, which files? I MY PC is HP DC7900, Intel Quad Core 2 q9550 2,83 GHz 12m/lga775, 8 gb can you pass the output of the following command from tinycore ? cat /proc/cpuinfo Quote Link to comment Share on other sites More sharing options...
cferra Posted April 12, 2022 Share #2381 Posted April 12, 2022 5 minutes ago, Alekc said: Does anybody know hot to run hw transcoding on DS918+ system? I have baremetal installation DSM 7.1 and cpu i5 8400. And also have no some thumbnails generated for video files in Photo & DS video station in logs I have seen such error " System failed to convert video [/volume2/photo/test/00063.MTS] to mpeg4." I don’t know how relevant it is to your situation but in 7.1 synology changed the way codecs are downloaded and tied them to a user account and I think a real serial number. It could be the cause of your error 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 12, 2022 Author Share #2382 Posted April 12, 2022 23 minutes ago, RedCat said: It was unsuccessful Which extension is failing ? Quote Link to comment Share on other sites More sharing options...
Alekc Posted April 12, 2022 Share #2383 Posted April 12, 2022 4 минуты назад, cferra сказал: I don’t know how relevant it is to your situation but in 7.1 synology changed the way codecs are downloaded and tied them to a user account and I think a real serial number. It could be the cause of your error You are right! But I've got the same behaviour in dsm 7.0.1 too. How can I change sn & mac in installed system? Just to change it in file user_config.json? Quote Link to comment Share on other sites More sharing options...
cferra Posted April 12, 2022 Share #2384 Posted April 12, 2022 (edited) 1 minute ago, Alekc said: You are right! But I've got the same behaviour in dsm 7.0.1 too. How can I change sn & mac in installed system? Just to change it in file user_config.json? You should be able to and then do a recompile of the loader / I’m not sure how that process might change now with all the postupdate stuff Edited April 12, 2022 by cferra Quote Link to comment Share on other sites More sharing options...
Alekc Posted April 12, 2022 Share #2385 Posted April 12, 2022 35 минут назад, cferra сказал: You should be able to and then do a recompile of the loader / I’m not sure how that process might change now with all the postupdate stuff Thank you! Hw acceleration works now too. Just to share my experience i've changed sn & mac in conf file then built image and backup data as in usual installation process. Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 12, 2022 Share #2386 Posted April 12, 2022 24 minutes ago, Alekc said: Thank you! Hw acceleration works now too. Just to share my experience i've changed sn & mac in conf file then built image and backup data as in usual installation process. Were you able to install advanced media extensions? I am running 7.1 with real sn mac, and even signed into my synology acct, nas is listed, but I can not activate advanced media extensions! My serial was not done by serialgen, it is actual real box serial and mac. Quote Link to comment Share on other sites More sharing options...
RacerX Posted April 12, 2022 Share #2387 Posted April 12, 2022 Good News = Success Story as Peter would say.... I started my install with Intel SR2 10gb card and it got stuck at the end of ten minutes."something has gone wrong." So I changed in the Mellanox 544+QSFP Adapter and finished the install. Setting up users etc The automatic extensions are working great! broadwellnk-7.1.0-42661 bare metal lspci -v 01:00.0 Network controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] Subsystem: Hewlett-Packard Company InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f7400000 (64-bit, non-prefetchable) [size=1M] Memory at f4000000 (64-bit, prefetchable) [size=32M] Expansion ROM at f7300000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: mlx4_core lspci -v 06:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) Subsystem: Super Micro Computer Inc Device 0808 Flags: bus master, fast devsel, latency 0, IRQ 16 I/O ports at b000 [size=256] Memory at f7240000 (64-bit, non-prefetchable) [size=64K] Memory at f7200000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at f7100000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: mpt3sas I can know see all of drives I connected to LSI SAS 3008 HBA . the sata scsi script works properly https://imgur.com/a/xiqAe56 Ports 2 sata 6gb ports - Micron 5100 attached 4 sata 3gb ports - None Attached Lsi SAS2 2308 8 ports - None Attached LSI SAS3008 8 ports - 3 ssd Attached and 3 hdd Attached Great work....... Quote Link to comment Share on other sites More sharing options...
sam juan Posted April 12, 2022 Share #2388 Posted April 12, 2022 @totikk @Dreadnought were you able to fix the issue where it says "Sorry, the page you are looking for is not found." issue and then turns off? i have 3 qnap boxes and the other 2 works fine for TSU 7.1, fresh install; atom 525 does not work, i3-2120 works fine. not sure if related to AES but as per intel site: Intel® AES New Instructions = NO for both proc. atom 525 works with 7.0.1; i will try to do upgrade from 7.0.1 to 7.1 some time. cc @pocopico for some ideas. Quote Link to comment Share on other sites More sharing options...
petr_z Posted April 13, 2022 Share #2389 Posted April 13, 2022 1 час назад, sam juan сказал: "Sorry, the page you are looking for is not found." on vmware platform with dva3221 also does not fix. Quote Link to comment Share on other sites More sharing options...
NotHere Posted April 13, 2022 Share #2390 Posted April 13, 2022 5 hours ago, pocopico said: if you don’t have nvidia GPU you have to comment out some files. Also if you run this on older CPU there is another thing you need to comment Hi POCOPICO. Thanks for all the hard work you have put into this project, much appreciated. I really enjoy using DSM for small stuff. I use this on Proxmox and I have been able to get DS3615xs bromolow-7.0.1-42218 working fine :). Sadly I am not able to update to the 7.1 nor have I been able to get DS3622xs+ working. Is this an issue with my hardware or my options? I would just like to get to 7.1 at least in DS3615xs... I have seeing your advice about the GPU. I have not passthrough my GPU to proxmox; would that be the reason I can get DS3622xs+ working correctly? Is there any advice to upgrade my current working DS3615xs bromolow-7.0.1-42218 to 7.1.0? Quote Link to comment Share on other sites More sharing options...
Uri3l Posted April 13, 2022 Share #2391 Posted April 13, 2022 Il y a 3 heures, NotHere a dit : Hi POCOPICO. Thanks for all the hard work you have put into this project, much appreciated. I really enjoy using DSM for small stuff. I use this on Proxmox and I have been able to get DS3615xs bromolow-7.0.1-42218 working fine :). Sadly I am not able to update to the 7.1 nor have I been able to get DS3622xs+ working. Is this an issue with my hardware or my options? I would just like to get to 7.1 at least in DS3615xs... I have seeing your advice about the GPU. I have not passthrough my GPU to proxmox; would that be the reason I can get DS3622xs+ working correctly? Is there any advice to upgrade my current working DS3615xs bromolow-7.0.1-42218 to 7.1.0? Hello guy yesterday i finaly installed DS3622xs+ on my proxmox but you need to use Intel e1000 as network card look my command ive used on tiny core: [DS3622xs+] sudo su ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json ./rploader.sh build broadwellnk-7.0.1-42218 ./rploader.sh backup now Quote Link to comment Share on other sites More sharing options...
RedCat Posted April 13, 2022 Share #2392 Posted April 13, 2022 (edited) 7 hours ago, pocopico said: Which extension is failing ? I do not know. How can I watch it? I didn't add more extension. I made a new VM on proxmox with vmware lan, and: update fullupgrade serialgen DS920 + satamap change mac address backup build geminilake-7.0.1-42218 It start, and show me that error Maybe you know, why dont find any hdd 920+ on 7.1? Edited April 13, 2022 by RedCat Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2393 Posted April 13, 2022 6 hours ago, sam juan said: @totikk @Dreadnought were you able to fix the issue where it says "Sorry, the page you are looking for is not found." issue and then turns off? i have 3 qnap boxes and the other 2 works fine for TSU 7.1, fresh install; atom 525 does not work, i3-2120 works fine. not sure if related to AES but as per intel site: Intel® AES New Instructions = NO for both proc. atom 525 works with 7.0.1; i will try to do upgrade from 7.0.1 to 7.1 some time. cc @pocopico for some ideas. These are the shutdown fixes i've founs so far. In older CPUs you need to comment out the following : cat /lib/modules-load.d/70-crypto-kernel.conf cbc md5 cts ansi_cprng des_generic authenc aes-x86_64 ecb sha256_generic cryptd # crc32c-intel arc4 /lib/modules-load.d/70-cpufreq-kernel.conf cpufreq_stats processor # acpi-cpufreq cpufreq_performance cpufreq_powersave To do so, i suggest you do the following. While at GRUB select your boot option and press 'e' at the end of the linux line add force_junior. If you have the redpill-install you can then use the ttyd that is started on junior mode. Open your browser and point to http://<youripaddress>:7681 user is root. The edit the files and reboot. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 13, 2022 Share #2394 Posted April 13, 2022 On 4/12/2022 at 10:31 AM, lws8964 said: Anybody who can post fresh install guide! many thanks🙏🏻🙏🏻🙏🏻 I uploaded the full version guide for dsm 7.1 installation below as a new topic in the tutorial just now and I am waiting for approval. You will be able to read it after it is approved. 1 Quote Link to comment Share on other sites More sharing options...
cferra Posted April 13, 2022 Share #2395 Posted April 13, 2022 These are the shutdown fixes i've founs so far. In older CPUs you need to comment out the following : cat /lib/modules-load.d/70-crypto-kernel.conf cbc md5 cts ansi_cprng des_generic authenc aes-x86_64 ecb sha256_generic cryptd # crc32c-intel arc4 /lib/modules-load.d/70-cpufreq-kernel.conf cpufreq_stats processor # acpi-cpufreq cpufreq_performance cpufreq_powersave To do so, i suggest you do the following. While at GRUB select your boot option and press 'e' at the end of the linux line add force_junior. If you have the redpill-install you can then use the ttyd that is started on junior mode. Open your browser and point to http://:7681 user is root. The edit the files and reboot.Does misc disable the crc32c for 3622? What functionality does that disable by commenting that particular feature out, do you know?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2396 Posted April 13, 2022 4 hours ago, petr_z said: on vmware platform with dva3221 also does not fix. You need to comment these files, process i suggest is the same. To do so, i suggest you do the following. While at GRUB select your boot option and press 'e' at the end of the linux line add force_junior. If you have the redpill-install you can then use the ttyd that is started on junior mode. Open your browser and point to http://<youripaddress>:7681 user is root. The edit the files and reboot. Fix the acpi systemd issue otherwise DSM will shutdown on access /lib/modules-load.d/70-cpufreq-kernel.conf for people NOT having an NVIDIA card the following sould also be performed otherwise DSM will shutdown on access Remove both lines on : /lib/modules-load.d/70-syno-nvidia-gpu.conf 2 Quote Link to comment Share on other sites More sharing options...
cferra Posted April 13, 2022 Share #2397 Posted April 13, 2022 For people who use proxmox. This may help https://forum.proxmox.com/threads/neccessary-to-enable-aes-ni-in-cpu-flags.87695/If you selected kvm64 for that guest, it may mess with AES-ni and block it even if your cpu supports it. Might be worth checking Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2398 Posted April 13, 2022 (edited) 18 minutes ago, cferra said: Does misc disable the crc32c for 3622? What functionality does that disable by commenting that particular feature out, do you know? Sent from my iPhone using Tapatalk No redpill-misc will only solve the acpi issue. As for the crc32c-intel.ko it expects SSE4.2. So if your CPU is missing SSE4_2 then the loading of that module will fail. sh-4.4# insmod /lib/modules/crc32c-intel.ko insmod: ERROR: could not insert module /lib/modules/crc32c-intel.ko: No such device From the following post i've found, it looks like it will be used for BTRFS hardware accelaration, *MAYBE* encryption ? But anyway BTRFS is working fine on a test box with crc32c-intel disabled. Quote Digging a little deeper it turns out my processor supports only SSE4.1 and not SSE4.2 instruction set, which is where hardware acceleration for CRC32 operations is performed. Problem solved. Looks to me that 'libcrc32c.ko' does the check on hardware availability and pulls in the appropriate driver (crc32c-intel.ko or crc32c_generic) falling back to the generic/software driver. Edited April 13, 2022 by pocopico 1 Quote Link to comment Share on other sites More sharing options...
cferra Posted April 13, 2022 Share #2399 Posted April 13, 2022 Good to know! Thanks!Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 13, 2022 Author Share #2400 Posted April 13, 2022 9 hours ago, RedCat said: I try to install under proxmox 920+ with 7.1.0. Loader is booting, find.synology.com find the 920+. I click connect, the next screen is: Dont detect hard drive in DS920+. 918 and 3622xs works for me under proxmox with 7.1 What is wrong? If the auto patching of the model.dtb is not working for you, you need to manually patch the file and put it inside the redpill-dtb extension. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.