phone guy Posted April 1, 2022 Share #1801 Posted April 1, 2022 Can anyone verify for me, did this rp build correctly? It says I need drivers for i915 and ahci I assumed the 'ext apollolake auto' would have added them itself? tc@box:~$ ./rploader.sh build apollolake-7.0.1-42218 Rploader Version : 0.6.0.8 Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download TOOLKIT_SHA : d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/apollolake-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : apollolake TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : test-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE= modules.alias.4.json Checking Internet Access -> OK Checking if a newer version exists on the repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. No extra build option specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds918p_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus.tgz Extracting module Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found VGA Controller : pciid 8086d000022b1 Required Extension : i915 Searching for matching extension for i915 Found SATA Controller : pciid 8086d000022a3 Required Extension : ahci Searching for matching extension for ahci [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.r8169/pocopico.r8169.json). For more info use "ext-manager.sh info pocopico.r8169" *** Process will exit *** Found Ethernet Interface : pciid 10ecd00008168 Required Extension : r8169 Searching for matching extension for r8169 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.r8169/pocopico.r8169.json). For more info use "ext-manager.sh info pocopico.r8169" *** Process will exit *** Found Ethernet Interface : pciid 10ecd00008168 Required Extension : r8169 Searching for matching extension for r8169 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json" Found SATA Controller : pciid 1b21d00000612 Required Extension : ahci Searching for matching extension for ahci Found SATA Controller : pciid 1b21d00000612 Required Extension : ahci Searching for matching extension for ahci ------------------------------------------------------------------------------------------------ Starting loader creation Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################################################################################## 100.0%############################################################################################################################################################## 100.0% [OK] [#] ========================================== thethorgroup.boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42218 ds918p_25556 ds3622xsp_42218 ds2422p_42218 ds3615xs_41222 ds3615xs_25556 ds920p_42218 ds920p_42550 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################################################################################## 100.0%############################################################################################################################################################## 100.0% [OK] [#] ========================================== thethorgroup.virtio ========================================== [#] Extension name: VirtIO [#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar) [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio [#] Software author: https://www.linux-kvm.org/page/Virtio [#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42218 ds918p_25556 ds3622xsp_42218 ds2422p_42218 ds3615xs_41222 ds3622xsp_42550 ds3615xs_25556 ds920p_42218 ds920p_42550 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating pocopico.r8169 extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################################################################################## 100.0% [#] Extension pocopico.r8169 index is already up to date [#] Updating thethorgroup.boot-wait extension... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################################################################################## 100.0%############################################################################################################################################################## 100.0% [#] Extension thethorgroup.boot-wait index is already up to date [#] Updating thethorgroup.virtio extension... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################################################################################## 100.0%############################################################################################################################################################## 100.0% [#] Extension thethorgroup.virtio index is already up to date [#] Updating thethorgroup.virtio extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds918p_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/releases/ds918p_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################################################################################## 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.r8169 platform ds918p_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/releases/r8169-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.r8169/ds918p_42218/r8169-4.4.180plus.tgz ############################################################################################################################################################## 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.r8169/ds918p_42218/r8169-4.4.180plus.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.r8169/ds918p_42218/r8169-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.r8169/ds918p_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/src/check-r8169.sh to /home/tc/redpill-load/custom/extensions/pocopico.r8169/ds918p_42218/check-r8169.sh ############################################################################################################################################################## 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.r8169/ds918p_42218/check-r8169.sh file... [OK] [#] Successfully processed recipe for extension pocopico.r8169 platform ds918p_42218 [#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################################################################################## 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.boot-wait platform ds918p_42218 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds918p_42218/boot-wait.sh ############################################################################################################################################################## 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds918p_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension thethorgroup.boot-wait platform ds918p_42218 [#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/raw/master/recipes/ds918p_41890.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################################################################################## 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.virtio platform ds918p_42218 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/src/check-virtio.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/check-virtio.sh ############################################################################################################################################################## 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/check-virtio.sh file... [OK] [#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/releases/download/v1.0.0/virtio-4.4.180p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/virtio-3.10.180p.tgz ############################################################################################################################################################## 100.0%############################################################################################################################################################## 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/virtio-3.10.180p.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/virtio-3.10.180p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/... [OK] [#] Successfully processed recipe for extension thethorgroup.virtio platform ds918p_42218 [#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/virtio-3.10.180p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_42218/... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds918p_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS918%2B_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 338M 100 338M 0 0 10.3M 0 0:00:32 0:00:32 --:--:-- 10.1M [#] Verifying /home/tc/redpill-load/cache/ds918p_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds918p_42218.pat file to /home/tc/redpill-load/build/1648784681/pat-ds918p_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1648784681/pat-ds918p_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1648784681/pat-ds918p_42218-unpacked/zImage to /home/tc/redpill-load/build/1648784681/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1648784681/pat-ds918p_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1648784681/pat-ds918p_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1648784681/rd-ds918p_42218-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1648784681/rd-ds918p_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1648784681/rd-patched-ds918p_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds918p_42218 platform extensions to /home/tc/redpill-load/build/1648784681/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1648784681/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sdc1 to localdiskp1 /dev/sdc2 localdiskp2 Creating tinycore entry menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS918+ v7.0.1-42218 (USB, Verbose)' { menuentry 'RedPill DS918+ v7.0.1-42218 (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { tc@box:~$ Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 1, 2022 Author Share #1802 Posted April 1, 2022 (edited) 14 hours ago, MajkelP said: Thank you for your answer, So I cleaned all my three drives and USB and started from the scratch and after I put this commend sudo ./rploader.sh satamap now I got this: I am not quite sure if I can see any different beside of Found SCSI HBAs, We need to install the SCSI modules Don't run this as root. and in DSM 7.01 I am getting this: and My motherboard has got 4 SATA ports and I have got one SAS controller 9211 8i IT (I believe that supports 8 disks) I am not quite sure if these settings are correct: "SataPortMap": "40", "DiskIdxMap": "0001" My first HDD disk is connected to the first SATA AHCI motherboard controller and two others SSD disks are connected to SAS controller. root@DS3622xsp:~# lspci -nnq 0000:00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [8086:191f] (rev 07) 0000:00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 07) 0000:00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) 0000:00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) 0000:00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31) 0000:00:17.0 SATA controller [0106]: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] (rev 31) 0000:00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 [8086:a167] (rev f1) 0000:00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 [8086:a110] (rev f1) 0000:00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 [8086:a118] (rev f1) 0000:00:1d.1 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #10 [8086:a119] (rev f1) 0000:00:1d.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #11 [8086:a11a] (rev f1) 0000:00:1f.0 ISA bridge [0601]: Intel Corporation Z170 Chipset LPC/eSPI Controller [8086:a145] (rev 31) 0000:00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31) 0000:00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller [8086:a170] (rev 31) 0000:00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31) 0000:00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-V [8086:15b8] (rev 31) 0000:01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) 0000:02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963 [144d:a804] 0000:06:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller [1b21:1242] 0001:09:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) 0001:0c:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) Some advice would be appreciated. Thank you, In general, dont run the rploader.sh with sudo its a bad idea and messes the permissions of the subdirectories. The script itself will run with sudo any commands if needed. Quote Found SCSI HBAs, We need to install the SCSI modules Don't run this as root. run this again with no sudo Edited April 1, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 1, 2022 Share #1803 Posted April 1, 2022 (edited) No one reports health information missing S.M.A.R.T. issues on DS3622xs+ storage manager, so I report them. It's perfect!!! There is no problem with H310 HBA SHR. Finally, a test of NVMe cache usage remains. I hope it goes well. @pocopico Thank you so much. NVMe cache is perfect too. [How to activate DS3622xs+ NVMe cache] I would like to tell you how to check it more easily by accessing SSH. lspci -tvnq or udevadm info /dev/nvme0n1 Therefore, please check the DID value XX.Y of M.2 and apply it below. In my case, XX.Y was 01.0. Application is... sudo sed -i 's/03.2/01.0/g' /etc.defaults/extensionPorts Check. cat /etc.defaults/extensionPorts Result [pci] pci1="0000:00:01.0" After that, you have to restart... Edited April 1, 2022 by Peter Suh 3 Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted April 1, 2022 Share #1804 Posted April 1, 2022 (edited) Hey guys, I took the day to try to make this work. Now that DSM 7 is updated to the latest version, maybe it will be easier. and I know there are other with the same problem. Here it goes: I'm trying to make my 2nd NIC to work. either be the PCI 2.5GBe or USB 1Gbe. It seems that both modules and Drivers are installed after following @pocopico instructions. My USB NIC works on TinyCore menu, because it let me ssh into it if I umplug the onboard NIC cable. It is seen by DSM interface under Control panel > General, but is does not load as a LAN2. My PCI NIC seems to be installed but it also does not load as LAN2, on this one, there is no light activity when CAT6 or CAT7 cables are connected to it. I tried different cable and got same results. I tried adding the modules as instructed by @pocopico. but I might be doing something wrong. Im sure it is something simple that I just dont know the "howto" to make it work. Can anyone help me out with this? here are some outputs: ps... My config is as follows: { "extra_cmdline": { "pid": "0x1666", "vid": "0x0951", "sn": "************", "mac1": "************1", "mac2": "************2", "mac3": "************3", "SataPortMap": "64", "DiskIdxMap": "0004", "netif_num": "3" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "8", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } Edited April 1, 2022 by Jizar Stoffel adding config info Quote Link to comment Share on other sites More sharing options...
Chedda Posted April 1, 2022 Share #1805 Posted April 1, 2022 Hey everyone. Hopefully someone can help me out. Previous setup (worked flawlessly): Vmware 7 Jun loader DS3617XS DSM 6.2.3-blahblahblah SAS2 9210-8i - SAS2 backplane 10 drives raid 6 1 drive for backup (own volume) I now run: Vmware 7 redpill - tinycore .0.4.6 DS3622XS+ DSM 7.0.1-42218 SAS3 9305-24i to SAS2 backplane RDM attached drives from the backplane to the VM SATA 0:0 - Redpill boot SATA 1:1 - 16gb vmdk for OS and things SATA 1:2-7 - RDM drives SATA 2:0-3 - RDM drives I see only the 16gb OS and things and the 10 drives for raid 6. It boots and the synology array is happy. I cannot however see the other drive on SATA 2:3 RDM. I cannot get the drives to go in order or go past the SATA bus 1:8 no matter what I do. I played around with the diskIdxMap and SataPortMap but no luck. I have tried to decipher the disk and sata port mappings and I can quite understand the hex values. I can handle the internalconfigports, usbports, and the esataconfigports but it looks like dsm 7 doesn't really listen to those values. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 1, 2022 Author Share #1806 Posted April 1, 2022 4 minutes ago, Chedda said: Hey everyone. Hopefully someone can help me out. Previous setup (worked flawlessly): Vmware 7 Jun loader DS3617XS DSM 6.2.3-blahblahblah SAS2 9210-8i - SAS2 backplane 10 drives raid 6 1 drive for backup (own volume) I now run: Vmware 7 redpill - tinycore .0.4.6 DS3622XS+ DSM 7.0.1-42218 SAS3 9305-24i to SAS2 backplane RDM attached drives from the backplane to the VM SATA 0:0 - Redpill boot SATA 1:1 - 16gb vmdk for OS and things SATA 1:2-7 - RDM drives SATA 2:0-3 - RDM drives I see only the 16gb OS and things and the 10 drives for raid 6. It boots and the synology array is happy. I cannot however see the other drive on SATA 2:3 RDM. I cannot get the drives to go in order or go past the SATA bus 1:8 no matter what I do. I played around with the diskIdxMap and SataPortMap but no luck. I have tried to decipher the disk and sata port mappings and I can quite understand the hex values. I can handle the internalconfigports, usbports, and the esataconfigports but it looks like dsm 7 doesn't really listen to those values. What are your current SataPortMap and DiskIdxMap settings ? Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted April 1, 2022 Share #1807 Posted April 1, 2022 21 minutes ago, Jizar Stoffel said: Hey guys, I took the day to try to make this work. Now that DSM 7 is updated to the latest version, maybe it will be easier. and I know there are other with the same problem. Here it goes: I'm trying to make my 2nd NIC to work. either be the PCI 2.5GBe or USB 1Gbe. It seems that both modules and Drivers are installed after following @pocopico instructions. My USB NIC works on TinyCore menu, because it let me ssh into it if I umplug the onboard NIC cable. It is seen by DSM interface under Control panel > General, but is does not load as a LAN2. My PCI NIC seems to be installed but it also does not load as LAN2, on this one, there is no light activity when CAT6 or CAT7 cables are connected to it. I tried different cable and got same results. I tried adding the modules as instructed by @pocopico. but I might be doing something wrong. Im sure it is something simple that I just dont know the "howto" to make it work. Can anyone help me out with this? here are some outputs: ps... My config is as follows: { "extra_cmdline": { "pid": "0x1666", "vid": "0x0951", "sn": "************", "mac1": "************1", "mac2": "************2", "mac3": "************3", "SataPortMap": "64", "DiskIdxMap": "0004", "netif_num": "3" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "8", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } also, here is an current output of dmesg: [ 5.096701] ax88179_178a 3-6:2.1 eth3: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, ba:eb:90:44:37:e9 [ 5.096795] usbcore: registered new interface driver ax88179_178a [ 5.096914] usbcore: registered new interface driver cdc_ncm [ 5.097505] usbcore: registered new interface driver cdc_mbim [ 6.131474] usb 3-6: USB disconnect, device number 5 [ 6.131548] ax88179_178a 3-6:2.0 eth2: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 6.150278] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19 [ 6.150281] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0001: -19 [ 6.150283] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19 [ 6.150364] ax88179_178a 3-6:2.1 eth3: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 6.170288] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19 [ 6.170292] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0001: -19 [ 6.170294] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19 [ 6.926934] usb 3-6: new high-speed USB device number 6 using xhci_hcd [ 7.403743] loop: module loaded [ 7.406337] zram0: detected capacity change from 0 to 4143759360 [ 7.407214] random: mkswap: uninitialized urandom read (16 bytes read) [ 7.440278] Adding 4046636k swap on /dev/zram0. Priority:-2 extents:1 across:4046636k SSFS [ 7.450499] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.451794] process '/sbin/ldconfig' started with executable stack [ 7.460969] random: crng init done [ 7.839025] ax88179_178a 3-6:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32 [ 8.149615] ax88179_178a 3-6:1.0 eth2: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, f8:e4:3b:53:b6:88 [ 24.573633] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8106e-1.fw failed with error -2 [ 24.573636] r8169 0000:03:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8106e-1.fw [ 24.574288] r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8106e-1.fw (-11) [ 24.574583] RTL8208 Fast Ethernet r8169-300:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 24.741334] r8169 0000:03:00.0 eth0: Link is Down [ 25.577639] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2 [ 25.577642] r8169 0000:04:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8125b-2.fw [ 25.578491] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-11) [ 25.603601] RTL8226B_RTL8221B 2.5Gbps PHY r8169-400:00: attached PHY driver [RTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 25.723747] r8169 0000:04:00.0 eth1: Link is Down [ 26.611909] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 27.140632] ax88179_178a 3-6:1.0 eth2: Failed to read reg index 0x0040: -32 [ 27.596267] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1 [ 29.772356] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1 Quote Link to comment Share on other sites More sharing options...
faninx Posted April 1, 2022 Share #1808 Posted April 1, 2022 On 3/30/2022 at 8:26 PM, pocopico said: Fix the acpi systemd issue otherwise DSM will shutdown on access (check with systemctl list-units --state failed), You will have to perform that after the first succesfull DSM reboot. ./rploader.sh mountdsmroot now sed -i 's/^acpi-cpufreq/# acpi-cpufreq/g' /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf && cat /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf What's the timing to run the sed cmd? I tried postupdate -> reboot -> redpill loader sata -> visit DSM -> system crashed and reboot -> tinycore -> mount & sed -> reboot -> visit DSM, still crash. PS: DS3622xs+ Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 1, 2022 Author Share #1809 Posted April 1, 2022 3 minutes ago, faninx said: What's the timing to run the sed cmd? I tried postupdate -> reboot -> redpill loader sata -> visit DSM -> system crashed and reboot -> tinycore -> mount & sed -> reboot -> visit DSM, still crash. PS: DS3622xs+ Yes, then you most probably have SSD cache ? You can remove this and try again .. Quote Link to comment Share on other sites More sharing options...
MajkelP Posted April 1, 2022 Share #1810 Posted April 1, 2022 (edited) duplicate post Edited April 1, 2022 by MajkelP amend Quote Link to comment Share on other sites More sharing options...
MajkelP Posted April 1, 2022 Share #1811 Posted April 1, 2022 8 minutes ago, faninx said: What's the timing to run the sed cmd? I tried postupdate -> reboot -> redpill loader sata -> visit DSM -> system crashed and reboot -> tinycore -> mount & sed -> reboot -> visit DSM, still crash. PS: DS3622xs+ https://xpenology.com/forum/topic/53817-redpill-tinycore-loader/?do=findComment&comment=272528 Does it only for DVA3221 ? Quote Link to comment Share on other sites More sharing options...
faninx Posted April 1, 2022 Share #1812 Posted April 1, 2022 2 minutes ago, pocopico said: Yes, then you most probably have SSD cache ? You can remove this and try again .. With out SSD Cache. After redpill loader boot DSM, I can access DSM via SSH. systemctl list-units --state failed result Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 1, 2022 Author Share #1813 Posted April 1, 2022 (edited) 5 minutes ago, faninx said: With out SSD Cache. After redpill loader boot DSM, I can access DSM via SSH. systemctl list-units --state failed result This is pretty much fixable by editing : /usr/lib/modules-load.d/70-cpufreq-kernel.conf and removing the line : acpi-cpufreq Edited April 1, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
faninx Posted April 1, 2022 Share #1814 Posted April 1, 2022 still the same issue. so sad Quote Link to comment Share on other sites More sharing options...
MajkelP Posted April 1, 2022 Share #1815 Posted April 1, 2022 11 minutes ago, faninx said: still the same issue. so sad Are you trying to do this: ./rploader.sh mountdsmroot now sed -i 's/^acpi-cpufreq/# acpi-cpufreq/g' /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf && cat /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf on the DS3622xsp ? But according to the instruction, this fix is for DVA3221. https://xpenology.com/forum/topic/53817-redpill-tinycore-loader/?do=findComment&comment=272528 1 Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted April 1, 2022 Share #1816 Posted April 1, 2022 3 hours ago, Jizar Stoffel said: also, here is an current output of dmesg: [ 5.096701] ax88179_178a 3-6:2.1 eth3: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, ba:eb:90:44:37:e9 [ 5.096795] usbcore: registered new interface driver ax88179_178a [ 5.096914] usbcore: registered new interface driver cdc_ncm [ 5.097505] usbcore: registered new interface driver cdc_mbim [ 6.131474] usb 3-6: USB disconnect, device number 5 [ 6.131548] ax88179_178a 3-6:2.0 eth2: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 6.150278] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19 [ 6.150281] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0001: -19 [ 6.150283] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19 [ 6.150364] ax88179_178a 3-6:2.1 eth3: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 6.170288] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19 [ 6.170292] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0001: -19 [ 6.170294] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19 [ 6.926934] usb 3-6: new high-speed USB device number 6 using xhci_hcd [ 7.403743] loop: module loaded [ 7.406337] zram0: detected capacity change from 0 to 4143759360 [ 7.407214] random: mkswap: uninitialized urandom read (16 bytes read) [ 7.440278] Adding 4046636k swap on /dev/zram0. Priority:-2 extents:1 across:4046636k SSFS [ 7.450499] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.451794] process '/sbin/ldconfig' started with executable stack [ 7.460969] random: crng init done [ 7.839025] ax88179_178a 3-6:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32 [ 8.149615] ax88179_178a 3-6:1.0 eth2: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, f8:e4:3b:53:b6:88 [ 24.573633] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8106e-1.fw failed with error -2 [ 24.573636] r8169 0000:03:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8106e-1.fw [ 24.574288] r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8106e-1.fw (-11) [ 24.574583] RTL8208 Fast Ethernet r8169-300:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 24.741334] r8169 0000:03:00.0 eth0: Link is Down [ 25.577639] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2 [ 25.577642] r8169 0000:04:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8125b-2.fw [ 25.578491] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-11) [ 25.603601] RTL8226B_RTL8221B 2.5Gbps PHY r8169-400:00: attached PHY driver [RTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 25.723747] r8169 0000:04:00.0 eth1: Link is Down [ 26.611909] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 27.140632] ax88179_178a 3-6:1.0 eth2: Failed to read reg index 0x0040: -32 [ 27.596267] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1 [ 29.772356] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1 Further progress... I was able to add TG3 extensions. after that I tried adding my specific needed driver and got this error. tc@box:~$ sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json jq: error (at <stdin>:1): Cannot iterate over null (null) jq: error (at <stdin>:1): Cannot iterate over null (null) Rploader Version : 0.6.0.8 Loader source : https://github.com/dogodefi/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/dogodefi/redpill-lkm.git : Redpill module branch : develop Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE= modules.alias.4.json Checking Internet Access -> OK Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json #=O#- # # [-] JSON file "/home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json" is invalid: parse error: Invalid numeric literal at line 7, column 10 [-] Extension loaded from https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json (id: ) is invalid: index JSON file is unparsable. Please report that to the extension maintainer via help URL [!] The index file for https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json extension is invalid - please report that to the extension maintainer *** Process will exit *** Quote Link to comment Share on other sites More sharing options...
Indio Posted April 1, 2022 Share #1817 Posted April 1, 2022 Hi all, I have DS3622xs+ installed on proxmox but since there is a sata limitation on the number of drives I an add 6 (0 to 5), and I want to add some more drives to my synology, is possible to add them as SCSI? I tried to add, build again with red pill and nothing appear on DSM. Any light how to add more drives to my synology? Thank you. Quote Link to comment Share on other sites More sharing options...
alienman Posted April 1, 2022 Share #1818 Posted April 1, 2022 2 minutes ago, Indio said: I have DS3622xs+ installed on proxmox but since there is a sata limitation on the number of drives I an add 6 (0 to 5), and I want to add some more drives to my synology, is possible to add them as SCSI? Yes! But you need to use my patched redpill that fixes the SERIAL NUMBER of the shimed disks: Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 1, 2022 Share #1819 Posted April 1, 2022 (edited) 6 hours ago, Peter Suh said: No one reports health information missing S.M.A.R.T. issues on DS3622xs+ storage manager, so I report them. It's perfect!!! There is no problem with H310 HBA SHR. Finally, a test of NVMe cache usage remains. I hope it goes well. @pocopico Thank you so much. NVMe cache is perfect too. [How to activate DS3622xs+ NVMe cache] I would like to tell you how to check it more easily by accessing SSH. lspci -tvnq or udevadm info /dev/nvme0n1 Therefore, please check the DID value XX.Y of M.2 and apply it below. In my case, XX.Y was 01.0. Application is... sudo sed -i 's/03.2/01.0/g' /etc.defaults/extensionPorts Check. cat /etc.defaults/extensionPorts Result [pci] pci1="0000:00:01.0" After that, you have to restart... Me and you have the H310 card, how are you or what are you doing for your drives to come up as "supported" Its like at random every time i build and then access it changes. I've looked at all the websites that have talked about satamap and diskidxmap and sasidxmap and I thought I understood, but I dont know what keeps the issue going. When it says the drives are unsupported that its not able to do secure erase or benchmarks. My settings are satamap 8 (all embedded sata ports are off. It was the only way to get it to put the drives in order. Im also not going to be using those ports), and diskid and sasid "0". I had it at 0 before and three out of the 4 disk showed up as being supported. Now 1 out of the 4 shows as being supported. I've changed the maxdisk to 8. So my understanding is that with the satamap, the first number you put in is the first controller. The number is the number of sata ports on that controller. Diskid is in hexdec, but it represents what drive to start at on the controller. Ex, I am only using the h310 so my diskid should be 0 or 00(if im not mistaken its the same, someone correct me if im wrong). If were going to use the embedded sata controller, then my satamap would be 68 (embedded has 6 ports sas card has 8] and my diskid would be 00(the first drive on embedded controller) and 07 (the number of drive where the first drive of the sas card should start. So it should be satamap 68, diskid 0007. If you dont mind could you share what your user_config.json settings? (obviously not your macs). I would really appreciate it. Maybe I can get this thing working fully finally. It could help eliminate the confusion. @turbo21psi has the same card or similar so the settings would be helpful for him and I would say many others as well. Thanks in advance. Edited April 1, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
turbo21psi Posted April 1, 2022 Share #1820 Posted April 1, 2022 13 minutes ago, Dvalin21 said: Me and you have the H310 card, how are you or what are you doing for your drives to come up as "supported" Its like at random every time i build and then access it changes. I've looked at all the websites that have talked about satamap and diskidxmap and sasidxmap and I thought I understood, but I dont know what keeps the issue going. When it says the drives are unsupported that its not able to do secure erase or benchmarks. My settings are satamap 8 (all embedded sata ports are off. It was the only way to get it to put the drives in order. Im also not going to be using those ports), and diskid and sasid "0". I had it at 0 before and three out of the 4 disk showed up as being supported. Now 1 out of the 4 shows as being supported. I've changed the maxdisk to 8. If you dont mind could you share what your user_config.json settings? (obviously not your macs). I would really appreciate it. Maybe I can get this thing working fully finally. @turbo21psi has the same card or similar so the settings would be helpful for him and I would say many others as well. Thanks in advance. This is what I'm using and all my disks are showing as normal. Could it be an issue with that specific disk perhaps? { "extra_cmdline": { "pid": "0x5571", "vid": "0x0781", "sn": " ", "mac1": " ", "mac2": " ", "mac3": " ", "SataPortMap": "8", "netif_num": "3", "DiskIdxMap": "0F00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 1, 2022 Author Share #1821 Posted April 1, 2022 20 minutes ago, Dvalin21 said: Me and you have the H310 card, how are you or what are you doing for your drives to come up as "supported" Its like at random every time i build and then access it changes. I've looked at all the websites that have talked about satamap and diskidxmap and sasidxmap and I thought I understood, but I dont know what keeps the issue going. When it says the drives are unsupported that its not able to do secure erase or benchmarks. My settings are satamap 8 (all embedded sata ports are off. It was the only way to get it to put the drives in order. Im also not going to be using those ports), and diskid and sasid "0". I had it at 0 before and three out of the 4 disk showed up as being supported. Now 1 out of the 4 shows as being supported. I've changed the maxdisk to 8. If you dont mind could you share what your user_config.json settings? (obviously not your macs). I would really appreciate it. Maybe I can get this thing working fully finally. @turbo21psi has the same card or similar so the settings would be helpful for him and I would say many others as well. Thanks in advance. should you think about flashing your HBA to latest available firmware ? Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 1, 2022 Share #1822 Posted April 1, 2022 5 minutes ago, turbo21psi said: This is what I'm using and all my disks are showing as normal. Could it be an issue with that specific disk perhaps? { "extra_cmdline": { "pid": "0x5571", "vid": "0x0781", "sn": " ", "mac1": " ", "mac2": " ", "mac3": " ", "SataPortMap": "8", "netif_num": "3", "DiskIdxMap": "0F00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { I dont think its the disk however i haven't tried 0F00 since I've made sure to turn the embedded ports off. I will have to try that. I noticed that you added the netif_num. I wonder, are the nics you are using individual or are they all on the same device? I have the T320 and i believe its the same device so I haven't had to include that for both of them to show up. Now I'm just being curious Quote Link to comment Share on other sites More sharing options...
turbo21psi Posted April 1, 2022 Share #1823 Posted April 1, 2022 1 minute ago, Dvalin21 said: I dont think its the disk however i haven't tried 0F00 since I've made sure to turn the embedded ports off. I will have to try that. I noticed that you added the netif_num. I wonder, are the nics you are using individual or are they all on the same device? I have the T320 and i believe its the same device so I haven't had to include that for both of them to show up. Now I'm just being curious They are 2 different cards. A single port intel NIC and a dual port Mellanox NIC. I disabled the onboard NICs. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 1, 2022 Share #1824 Posted April 1, 2022 3 minutes ago, pocopico said: should you think about flashing your HBA to latest available firmware ? I do plan on flashing it, i was having trouble with the process, but I believe I've found a suitable process that should work. Which it is on the latest dell firmware, but I will be flashing it to the LSI IT mode firmware in the future. 1 Quote Link to comment Share on other sites More sharing options...
RacerX Posted April 1, 2022 Share #1825 Posted April 1, 2022 (edited) Good News i noticed this the other day "Fixed mlx4 typo and added an on_os_load script to bring up interfaces" Tested G7 Loaded G7 bare metal with DS3615xs bromolow-7.0.1-42218 no extensions Mellanox CX353A ConnextX-3 FDR Infiniband + 40GB Ethernet 06:00.0 Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3] Subsystem: Mellanox Technologies Device 0051 Flags: bus master, fast devsel, latency 0, IRQ 32 Memory at fc300000 (64-bit, non-prefetchable) [size=1M] Memory at e2800000 (64-bit, prefetchable) [size=8M] Expansion ROM at fc200000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: mlx4_core Works fine installed correctly with the script.... Edited April 1, 2022 by RacerX 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.