Black6spdZ Posted January 17, 2022 Share #51 Posted January 17, 2022 currently running the RTL8156B package "2.5Gb USB 3 adapter" here https://github.com/bb-qq/r8152 on my 6.2.3 install. anyone test one of these adapters with DSM7? Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 17, 2022 Author Share #52 Posted January 17, 2022 9 hours ago, Black6spdZ said: currently running the RTL8156B package "2.5Gb USB 3 adapter" here https://github.com/bb-qq/r8152 on my 6.2.3 install. anyone test one of these adapters with DSM7? There are RP extensions for r8152 on my repo, you can test Quote Link to comment Share on other sites More sharing options...
rok1 Posted January 17, 2022 Share #53 Posted January 17, 2022 Has anyone been able to get an X550-T2 (or any other 10gbe card) to link at 2.5gbe speeds with a DS918 build? 3617 it'll do fine but on 918 I'm only given 100,1000,10000 speeds. Quote Link to comment Share on other sites More sharing options...
04nightmare86 Posted January 17, 2022 Share #54 Posted January 17, 2022 Any news on this? Can I install DSM 7 with TinyLoader and the onboard NIC's on Microserver gen8 - baremetal?Yes, extension tg3Отправлено с моего iPhone используя Tapatalk Quote Link to comment Share on other sites More sharing options...
killseeker Posted January 20, 2022 Share #55 Posted January 20, 2022 Are the following devices compatible with DSM 7 and the driver extensions yet? I'm currently testing with TinyLoader and have these device on my production systems: Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02) and Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) Many thanks, Quote Link to comment Share on other sites More sharing options...
Mentat Posted January 20, 2022 Share #56 Posted January 20, 2022 (edited) On 1/17/2022 at 2:16 PM, 04nightmare86 said: Yes, extension tg3 Can you be more specific how can I add this tg3 extension? I plan to use this: https://github.com/pocopico/tinycore-redpill Edited January 20, 2022 by Mentat Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #57 Posted January 20, 2022 1 hour ago, Mentat said: Can you be more specific how can I add this tg3 extension? I plan to use this: https://github.com/pocopico/tinycore-redpill By ssh into tinycore and doing following: sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/pocopico/rp-ext/blob/main/tg3/rpext-index.json 1 Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #58 Posted January 20, 2022 16 hours ago, killseeker said: Are the following devices compatible with DSM 7 and the driver extensions yet? I'm currently testing with TinyLoader and have these device on my production systems: Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02) and Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) Many thanks, You will have to test yourself. But if i am not mistaken for the first one you wil need mpt3sas. But try just with the build in pci discovery: sudo ./rploader.sh ext bromolow-7.0.1-42218 auto For me it worked with bromolow but it didn't find any hdd with the apollolake. 1 Quote Link to comment Share on other sites More sharing options...
killseeker Posted January 21, 2022 Share #59 Posted January 21, 2022 6 hours ago, Unregistrado said: You will have to test yourself. But if i am not mistaken for the first one you wil need mpt3sas. But try just with the build in pci discovery: sudo ./rploader.sh ext bromolow-7.0.1-42218 auto For me it worked with bromolow but it didn't find any hdd with the apollolake. I believe it works for 3615XS but could have some compatibility issues with 3617XS systems. Quote Link to comment Share on other sites More sharing options...
giannis Posted January 21, 2022 Share #60 Posted January 21, 2022 Can you please add ata_piix driver? Quote Link to comment Share on other sites More sharing options...
dolbycat Posted January 22, 2022 Share #61 Posted January 22, 2022 sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/main/r8125/rpext-index.json Dsm7.01 installation keeps repeating itself. Quote Link to comment Share on other sites More sharing options...
Black6spdZ Posted January 24, 2022 Share #62 Posted January 24, 2022 On 1/20/2022 at 5:29 PM, Unregistrado said: You will have to test yourself. But if i am not mistaken for the first one you wil need mpt3sas. But try just with the build in pci discovery: sudo ./rploader.sh ext bromolow-7.0.1-42218 auto For me it worked with bromolow but it didn't find any hdd with the apollolake. so this means the redpill tinycore should be booted on the system/hardware that will run it so that it can autodetect the hardware installed? any gotchas on uefi boot? Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 24, 2022 Share #63 Posted January 24, 2022 1 hour ago, Black6spdZ said: so this means the redpill tinycore should be booted on the system/hardware that will run it so that it can autodetect the hardware installed? any gotchas on uefi boot? Yes, it will create what is needed to boot Synology. When you are done building and restart it will automatically start with the xpenology partition. No idea about uefi. 1 Quote Link to comment Share on other sites More sharing options...
Anar Posted January 24, 2022 Share #64 Posted January 24, 2022 Hi all can you add the extension for: Found SATA Controller : pciid 197bd00002360 Required Extension : No matching extension Asus AT5IONT-I Thanks Quote Link to comment Share on other sites More sharing options...
rok1 Posted January 24, 2022 Share #65 Posted January 24, 2022 Synology is sending out updates during the install process. If you are having issues installing fine and then the first reboot it wants to migrate, you need to cut your internet or block synology's servers. Ran into this issue last night working on a DS3617 box Quote Link to comment Share on other sites More sharing options...
tlsnine Posted January 26, 2022 Share #66 Posted January 26, 2022 I'm looking for some help with a quad-port, x553 Intel on-board driver, please. It should work with the ixgbe driver, however it doesn't seem to be. DS918+ Apollolake-7.0.1-42218 It builds fine, but it's not grabbing an IP address from any of the ports. I even tried manually assigning my MAC address in the json file with no luck. Also tried manually adding the other ixg* extensions with no success either. Works perfectly in TinyCore, just not RedPill. I had it working with Jun's loader along with an upgraded extras file. I'm going to try other builds after some sleep, but any assistance would be appreciated. FWIW I can get it going with an old Intel e1000e PCIe and ASUS, Atlantic 10GB card but I'd rather use the onboard nics. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 26, 2022 Share #67 Posted January 26, 2022 (edited) Hello!! Requesting the following to be added LSI Fusion-MPT base driver (mptbase, but you have it marked as mptsas) updated to 4.28.20.01. Ran sudo kmod list, lspci -vvv, and dmesg attached files. If there is anything that I've missed I apologize. I had ran dmesg when ssh into tinycore and never did I see mptbase or the other mpt that are used come up. I know mptsas, mpt2sas, and mpt3sas are not used. I received a list of the updated modules from here. LSI MPT Fusion Modules Let me know if there is any more information you need. Thanks in advance and all the hard work. dmesg kmod list lspci Edited January 26, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 28, 2022 Share #68 Posted January 28, 2022 On 1/26/2022 at 12:07 AM, Dvalin21 said: Hello!! Requesting the following to be added LSI Fusion-MPT base driver (mptbase, but you have it marked as mptsas) updated to 4.28.20.01. Ran sudo kmod list, lspci -vvv, and dmesg attached files. If there is anything that I've missed I apologize. I had ran dmesg when ssh into tinycore and never did I see mptbase or the other mpt that are used come up. I know mptsas, mpt2sas, and mpt3sas are not used. I received a list of the updated modules from here. LSI MPT Fusion Modules Let me know if there is any more information you need. Thanks in advance and all the hard work. dmesg 2.23 kB · 1 download kmod list 6.69 kB · 2 downloads lspci 2.9 kB · 0 downloads @pocopico With better understanding from your reply in the other thread, I need to request for modules mptctl, mptscsih, megaraid_mm, megaraid_mbox, mptbase, scsi_transport_spi Thanks in advance. Quote Link to comment Share on other sites More sharing options...
kurinando Posted January 31, 2022 Share #69 Posted January 31, 2022 One thing that is missing for stable usb ups support in version 7. the module ohci_hcd.ko that is needed to support some usb ups. Thanks Quote Link to comment Share on other sites More sharing options...
lacostey86 Posted February 8, 2022 Share #70 Posted February 8, 2022 i need this ext pciid 197bd00000585 Required Extension Quote Link to comment Share on other sites More sharing options...
Derrik Posted February 11, 2022 Share #71 Posted February 11, 2022 (edited) I have a DELL H310 raid card(passthrough it mode),I tried to use "aacraid" and"mpt2sas",but it can't be drivered.Could you made a ext for it? Loader version and type (918+): redpill apollolake-7.0.1-42218(rp-helper.sh) DSM version in use (including critical update): DSM7.0.1-42218 Using custom modules/ramdisk? If yes which one?: pocopico aacraid,mpt2sas Hardware details: Motherboard: B460MOTOR; HBA card: DELL H310 Edited February 11, 2022 by Derrik Quote Link to comment Share on other sites More sharing options...
Messenger Posted February 11, 2022 Share #72 Posted February 11, 2022 I migrate my n54l. Someone got wakeonlan work and which steps to do? Synoinfo.conf, grub.cfg look correct for me. S99ZZZ_Shutdown.sh doesnt work anymore. Quote Link to comment Share on other sites More sharing options...
Derrik Posted February 12, 2022 Share #73 Posted February 12, 2022 (edited) filename: /home/hang/mpt3sas.ko alias: mpt2sas version: 22.00.00.00 license: GPL description: LSI MPT Fusion SAS 3.0 & SAS 3.5 Device Driver author: Avago Technologies <MPT-FusionLinux.pdl@avagotech.com> srcversion: 80624A1362CD953ED59AF65 alias: pci:v00001000d000000D2sv*sd*bc*sc*i* alias: pci:v00001000d000000D1sv*sd*bc*sc*i* alias: pci:v00001000d000000D0sv*sd*bc*sc*i* alias: pci:v00001000d000000ACsv*sd*bc*sc*i* alias: pci:v00001000d000000ABsv*sd*bc*sc*i* alias: pci:v00001000d000000AAsv*sd*bc*sc*i* alias: pci:v00001000d000000AFsv*sd*bc*sc*i* alias: pci:v00001000d000000AEsv*sd*bc*sc*i* alias: pci:v00001000d000000ADsv*sd*bc*sc*i* alias: pci:v00001000d000000C3sv*sd*bc*sc*i* alias: pci:v00001000d000000C2sv*sd*bc*sc*i* alias: pci:v00001000d000000C1sv*sd*bc*sc*i* alias: pci:v00001000d000000C0sv*sd*bc*sc*i* alias: pci:v00001000d000000C8sv*sd*bc*sc*i* alias: pci:v00001000d000000C7sv*sd*bc*sc*i* alias: pci:v00001000d000000C6sv*sd*bc*sc*i* alias: pci:v00001000d000000C5sv*sd*bc*sc*i* alias: pci:v00001000d000000C4sv*sd*bc*sc*i* alias: pci:v00001000d000000C9sv*sd*bc*sc*i* alias: pci:v00001000d00000095sv*sd*bc*sc*i* alias: pci:v00001000d00000094sv*sd*bc*sc*i* alias: pci:v00001000d00000091sv*sd*bc*sc*i* alias: pci:v00001000d00000090sv*sd*bc*sc*i* alias: pci:v00001000d00000097sv*sd*bc*sc*i* alias: pci:v00001000d00000096sv*sd*bc*sc*i* alias: pci:v00001000d0000007Esv*sd*bc*sc*i* alias: pci:v00001000d000002B0sv*sd*bc*sc*i* alias: pci:v00001000d0000006Esv*sd*bc*sc*i* alias: pci:v00001000d00000087sv*sd*bc*sc*i* alias: pci:v00001000d00000086sv*sd*bc*sc*i* alias: pci:v00001000d00000085sv*sd*bc*sc*i* alias: pci:v00001000d00000084sv*sd*bc*sc*i* alias: pci:v00001000d00000083sv*sd*bc*sc*i* alias: pci:v00001000d00000082sv*sd*bc*sc*i* alias: pci:v00001000d00000081sv*sd*bc*sc*i* alias: pci:v00001000d00000080sv*sd*bc*sc*i* alias: pci:v00001000d00000065sv*sd*bc*sc*i* alias: pci:v00001000d00000064sv*sd*bc*sc*i* alias: pci:v00001000d00000077sv*sd*bc*sc*i* alias: pci:v00001000d00000076sv*sd*bc*sc*i* alias: pci:v00001000d00000074sv*sd*bc*sc*i* alias: pci:v00001000d00000072sv*sd*bc*sc*i* alias: pci:v00001000d00000070sv*sd*bc*sc*i* depends: retpoline: Y vermagic: 4.4.180+ SMP mod_unload parm: logging_level: bits for enabling additional logging info (default=0) parm: sdev_queue_depth: globally setting SAS device queue depth parm: max_sectors:max sectors, range 64 to 32767 default=32767 (ushort) parm: command_retry_count: Device discovery TUR command retry count: (default=144) (int) parm: missing_delay: device missing delay , io missing delay (array of int) parm: host_lock_mode:Enable SCSI host lock if set to 1(default=0) (int) parm: max_lun: max lun, default=16895 (int) parm: hbas_to_enumerate: 0 - enumerates all SAS 2.0, SAS3.0 & above generation HBAs 1 - enumerates only SAS 2.0 generation HBAs 2 - enumerates SAS 3.0 & above generation HBAs (default=-1, Enumerates all SAS 2.0, SAS 3.0 & above generation HBAs else SAS 3.0 & above generation HBAs only) (int) parm: mpt3sas_multipath: enabling mulipath support for target resets (default=0) (int) parm: multipath_on_hba: Multipath support to add same target device as many times as it is visible to HBA from various paths (by default: SAS 2.0,SAS 3.0 HBA & SAS3.5 HBA-This will be disabled) (int) parm: disable_eedp: disable EEDP support: (default=0) (uint) parm: diag_buffer_enable: post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0) (int) parm: disable_discovery: disable discovery (int) parm: allow_drive_spindown: allow host driver to issue START STOP UNIT(STOP) command to spindown the drive before shut down or driver unload, default=1, Dont spindown any SATA drives =0 / Spindown SSD but not HDD = 1/ Spindown HDD but not SSD =2/ Spindown all SATA drives =3 (uint) parm: prot_mask: host protection capabilities mask, def=0x7f (int) parm: protection_guard_mask: host protection algorithm mask, def=3 (int) parm: issue_scsi_cmd_to_bringup_drive: allow host driver to issue SCSI commands to bring the drive to READY state, default=1 (int) parm: sata_smart_polling: poll for smart errors on SATA drives: (default=0) (uint) parm: max_queue_depth: max controller queue depth (int) parm: max_sgl_entries: max sg entries (int) parm: msix_disable: disable msix routed interrupts (default=0) (int) parm: smp_affinity_enable:SMP affinity feature enable/disbale Default: enable(1) (int) parm: max_msix_vectors: max msix vectors (int) parm: mpt3sas_fwfault_debug: enable detection of firmware fault and halt firmware - (default=0) Edited February 12, 2022 by Derrik Quote Link to comment Share on other sites More sharing options...
Derrik Posted February 12, 2022 Share #74 Posted February 12, 2022 23 hours ago, Derrik said: I have a DELL H310 raid card(passthrough it mode),I tried to use "aacraid" and"mpt2sas",but it can't be drivered.Could you made a ext for it? Loader version and type (918+): redpill apollolake-7.0.1-42218(rp-helper.sh) DSM version in use (including critical update): DSM7.0.1-42218 Using custom modules/ramdisk? If yes which one?: pocopico aacraid,mpt2sas Hardware details: Motherboard: B460MOTOR; HBA card: DELL H310 01:00.0 RAID bus controller [0104]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) I can find my corresponding id in the mpt2sas&mpt3sas Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted February 12, 2022 Share #75 Posted February 12, 2022 38 minutes ago, Derrik said: 01:00.0 RAID bus controller [0104]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) I can find my corresponding id in the mpt2sas&mpt3sas If they arent working try mptsas and I'd that don't work try megaraid_sas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.