WiteWulf Posted September 28, 2021 Share #2026 Posted September 28, 2021 (edited) FWIW, this release (7.0.1-42218 with redpill-lkm 3474d9b) is very unstable for me. It's kernel panicking for Plex Media Server (which is essentially a big database) as well as my docker containers. I don't know if that's because of the move to 7.0.1-42218, or because I've also moved to 3474d9b again. I previously tried 3474d9b and found it very unstable on my system, so to went back to 021ed51, which crashed much less often. I've disabled docker on my system now, but it's kernel panicking every few minutes as soon as Plex Media Server starts doing anything. Gonna have to try and build a 7.0.1-42218 image with that older redpill-lkm commit as this is completely unusable now. Edited September 28, 2021 by WiteWulf Link to comment Share on other sites More sharing options...
D.S Posted September 28, 2021 Share #2027 Posted September 28, 2021 DS918+ 7.0.1-42218 is working good on my bare metal, but synology photo face recognition is still not working even with real SN & Mac 1 Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2028 Posted September 28, 2021 (edited) 12 minutes ago, D.S said: DS918+ 7.0.1-42218 is working good on my bare metal, but synology photo face recognition is still not working even with real SN & Mac Are your SN and MAC address real DS918+ values ? or generated one ? The SN and MAC must be real, and matching the running loader (DS918+ in your case). what do you see in /var/log/messages and /var/log/synofoto.log ? Edited September 28, 2021 by Orphée Link to comment Share on other sites More sharing options...
WiteWulf Posted September 28, 2021 Share #2029 Posted September 28, 2021 55 minutes ago, WiteWulf said: I've disabled docker on my system now, but it's kernel panicking every few minutes as soon as Plex Media Server starts doing anything. Gonna have to try and build a 7.0.1-42218 image with that older redpill-lkm commit as this is completely unusable now. Okay, I'm now running a bit of a Frankenstein's monster : TTG's redpill-lkm master 021ed51 jumkey's redpill-load dev 880c76b haydibe's script 0.7.4 (because 'redpill-lkm master 021ed51' won't compile with 0.11 due to missing build targets re. dev/prod/test) DSM 7.0.1-42218 Docker is still unstable when the system is under load: I need to wait a few minutes after boot to even start my containers that don't usually crash, but my influxdb container and data is still an instant crash. But at least on this set up it's not crashing when Plex Media Server is busy. NB. with respect to instability under load, the docker crashes seem more likely to occur after a few reboots, when the server comes back up and starts disk scrubbing. My "stable" containers are more likely to crash the system if launched while disk scrubbing is running. This is purely a "feeling" on my part, though, and not backed up by empirical evidence. Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2030 Posted September 28, 2021 (edited) @WiteWulf On my baremetal N43L G7, i'm running 3615xs - 7.0.41222 and 3474d9b and looks a bit more stable for some reason. On 7.0.1.42214 & 42218 i had instant crash when i was searching with universal search (synoelasticd) Traces lead to NMI : <NMI> [<ffffffff814a2759>] ? dump_stack+0xc/0x15 [<ffffffff814a16b1>] ? panic+0xbb/0x1df [<ffffffff810a9eb8>] ? watchdog_overflow_callback+0xa8/0xb0 [<ffffffff810db7d3>] ? __perf_event_overflow+0x93/0x230 [<ffffffff810da612>] ? perf_event_update_userpage+0x12/0xf0 [<ffffffff810152a4>] ? intel_pmu_handle_irq+0x1b4/0x340 [<ffffffff814a9d06>] ? perf_event_nmi_handler+0x26/0x40 [<ffffffff814a944e>] ? do_nmi+0xfe/0x440 [<ffffffff814a8a53>] ? end_repeat_nmi+0x1e/0x7e <<EOE>> Edited September 28, 2021 by pocopico 1 Link to comment Share on other sites More sharing options...
D.S Posted September 28, 2021 Share #2031 Posted September 28, 2021 17 minutes ago, Orphée said: Are your SN and MAC address real DS918+ values ? or generated one ? The SN and MAC must be real, and matching the running loader (DS918+ in your case). what do you see in /var/log/messages and /var/log/synofoto.log ? The SN & MAC are from real DS918+. I didn't see anything about the SN & MAC in /var/log/synofoto.log, and the information about the SN in /var/log/messages as below. Message in /var/log/messages: 2021-09-28T18:30:52+08:00 XXXX-NAS kernel: [ 16.531414] Got empty serial number. Generate serial number from product. 2021-09-28T18:30:52+08:00 XXXX-NAS kernel: [ 16.665292] Got empty serial number. Generate serial number from product. 2021-09-28T18:30:52+08:00 XXXX-NAS kernel: [ 16.665295] drivers/usb/core/hub.c ( 2940) Same device found. Change serial to ffffffccfffffffbffffffcbfffffff0 Link to comment Share on other sites More sharing options...
ct85msi Posted September 28, 2021 Share #2032 Posted September 28, 2021 10 minutes ago, pocopico said: @WiteWulf On my baremetal N43L G7, i'm running 7.0.41222 and 3474d9b and looks a bit more stable for some reason. On 7.0.1.42214 & 42218 i had instant crash when i was searching with universal search (synoelasticd) Traces lead to NMI : <NMI> [<ffffffff814a2759>] ? dump_stack+0xc/0x15 [<ffffffff814a16b1>] ? panic+0xbb/0x1df [<ffffffff810a9eb8>] ? watchdog_overflow_callback+0xa8/0xb0 [<ffffffff810db7d3>] ? __perf_event_overflow+0x93/0x230 [<ffffffff810da612>] ? perf_event_update_userpage+0x12/0xf0 [<ffffffff810152a4>] ? intel_pmu_handle_irq+0x1b4/0x340 [<ffffffff814a9d06>] ? perf_event_nmi_handler+0x26/0x40 [<ffffffff814a944e>] ? do_nmi+0xfe/0x440 [<ffffffff814a8a53>] ? end_repeat_nmi+0x1e/0x7e <<EOE>> maybe this fixes your issue ? Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2033 Posted September 28, 2021 2 minutes ago, ct85msi said: maybe this fixes your issue ? Thanks, already on latest version. I'm talking for 3615xs image Link to comment Share on other sites More sharing options...
WiteWulf Posted September 28, 2021 Share #2034 Posted September 28, 2021 22 minutes ago, pocopico said: On 7.0.1.42214 & 42218 i had instant crash when i was searching with universal search (synoelasticd) Interestingly, I've run a re-index of media folders (I use the Indexing Service to drive a UPnP music service via Media Service) and that's using postgresql. Odd that they'd use postgresql for the built-in media indexing and elasticsearch for the Universal Search 🤔 Link to comment Share on other sites More sharing options...
flybird08 Posted September 28, 2021 Share #2035 Posted September 28, 2021 17 hours ago, pocopico said: DS918+ (4.4.180+) 的一些编译模块。大多数网络驱动程序已经过测试并且可以正常工作 https://github.com/pocopico/4.4.180plus-modules Thank you for your offer. I tried to mount mptsas.ko in DS918, but it depends on scsi_ transport_ sas.ko, there is no such driver in GIT. Could you compile it? Link to comment Share on other sites More sharing options...
Aigor Posted September 28, 2021 Share #2036 Posted September 28, 2021 (edited) 6 minutes ago, flybird08 said: Edited September 28, 2021 by Aigor Error Link to comment Share on other sites More sharing options...
flybird08 Posted September 28, 2021 Share #2037 Posted September 28, 2021 (edited) 22 minutes ago, Aigor said: Sorry, the screenshot shows scsi_ transport_ Spi.ko, not scsi_ transport_ sas.ko, the last one is exactly what I need😀 Edited September 28, 2021 by flybird08 Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2038 Posted September 28, 2021 19 minutes ago, flybird08 said: Sorry, the screenshot shows scsi_ transport_ Spi.ko, not scsi_ transport_ sas.ko, the last one is exactly what I need😀 Its there now.. Not sure though that SAS will work ATM Link to comment Share on other sites More sharing options...
stefauresi Posted September 28, 2021 Share #2039 Posted September 28, 2021 Il y a 15 heures, pocopico a dit : Can you try atlantic.ko ? Hi, My motherboard have 2 NIC , if i try to inject atlantic.ko driver my ASUS 10Gb turn off , i need boot with disable nic (motherboard) but DSM 7 no load atlantic.ko driver when DSM start Best regards Link to comment Share on other sites More sharing options...
WiteWulf Posted September 28, 2021 Share #2040 Posted September 28, 2021 I'm back on 7.0.1-42218 with redpill-lkm 3474d9b as that Franken-rig was just as unstable. With Plex Media Server and Docker both stopped I now appear to have a pretty stable file and web server (that's not particularly useful) and not much else 🤣 Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2041 Posted September 28, 2021 (edited) 3 minutes ago, stefauresi said: Hi, My motherboard have 2 NIC , if i try to inject atlantic.ko driver my ASUS 10Gb turn off , i need boot with disable nic (motherboard) but DSM 7 no load atlantic.ko driver when DSM start Best regards Due to its size, It will not be possible to have the atlantic.ko driver into loader, you will have to wait for RedPill beta release Edited September 28, 2021 by pocopico Link to comment Share on other sites More sharing options...
D.S Posted September 28, 2021 Share #2042 Posted September 28, 2021 18 hours ago, pocopico said: A few compiled modules for DS918+ (4.4.180+). Most network drivers have been tested and work https://github.com/pocopico/4.4.180plus-modules Is it possible to compile i915.ko for Intel 10th CPU's UHD630 (device id: 9bc5,& 9bc8)? I tried but failed. Thanks. Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2043 Posted September 28, 2021 6 minutes ago, D.S said: Is it possible to compile i915.ko for Intel 10th CPU's UHD630 (device id: 9bc5,& 9bc8)? I tried but failed. Thanks. I also tried and it fails. Link to comment Share on other sites More sharing options...
flybird08 Posted September 28, 2021 Share #2044 Posted September 28, 2021 30 minutes ago, pocopico said: Its there now.. Not sure though that SAS will work ATM Thank you very much, but it seems that there is no way to use it for my LSI2308 SAS controller. I think it might need mpt2sas.ko or mpt3sas.ko. At least on Ubuntu 20.04 LTS, it shows that it uses mpt3sas.ko. It's really sad. Quote 0000:01:00.0 Class 0107: Device 1000:0086 (rev 05) Subsystem: Device 15d9:0691 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e000 [size=256] Region 1: Memory at df140000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at df100000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at df000000 [disabled] [size=1M] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s <64ns ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 8GT/s (ok), Width x8 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+ EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- Capabilities: [d0] Vital Product Data Unknown small resource type 00, will not decode more. Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [c0] MSI-X: Enable- Count=16 Masked- Vector table: BAR=1 offset=0000e000 PBA: BAR=1 offset=0000f000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 04000001 00000003 01010000 d20fbf4a Capabilities: [1e0 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn-, PerformEqu- LaneErrStat: 0 Capabilities: [1c0 v1] Power Budgeting <?> Capabilities: [190 v1] Dynamic Power Allocation <?> Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2045 Posted September 28, 2021 @flybird08 I've uploaded the modules, you can to download the mpt3sas.ko and try, but again you will not be able to use the SAS drives. Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2046 Posted September 28, 2021 (edited) 10 minutes ago, pocopico said: @flybird08 I've uploaded the modules, you can to download the mpt3sas.ko and try, but again you will not be able to use the SAS drives. Actually, just to "fix" words between SAS card and drives. On my case, and I think on most of us, drives are SATA. We have a LSI SAS HBA IT card, but with SAS to SATA cable https://www.amazon.fr/CableDeconn-SFF-8087-Fanout-Wihout-Latch/dp/B00S7KU0VO/ I just want to be clear on this. for @ThorGroup Disks are detected as SAS whereas there are SATA drives on SAS card. Thanks Edited September 28, 2021 by Orphée 1 Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2047 Posted September 28, 2021 (edited) 9 minutes ago, Orphée said: Actually, just to "fix" words between SAS card and drives. On my case, and I think on most of us, drives are SATA. We have a LSI SAS HBA IT card, but with SAS to SATA cable https://www.amazon.fr/CableDeconn-SFF-8087-Fanout-Wihout-Latch/dp/B00S7KU0VO/ I just want to be clear on this. for @ThorGroup Disks are detected as SAS whereas there are SATA drives on SAS card. Thanks I know what you mean, problem is that mpt3sas module will name the devices in a way it cannot be interpreted correctly by DSM. Also not all synology models support SAS by default so here we are waiting for the RedPill magic Edited September 28, 2021 by pocopico Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2048 Posted September 28, 2021 I know and I totally agree with you Link to comment Share on other sites More sharing options...
pocopico Posted September 28, 2021 Share #2049 Posted September 28, 2021 @Orphée I'm waiting for an HPE smart array to arrive as hpsa module names the drives in the classical sdX way. I'll keep you posted. Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2050 Posted September 28, 2021 (edited) I have a P222 on my desk. Disks where not detected as passthrough with Jun's loader. And Gen8 FAN was running high. Edited September 28, 2021 by Orphée Link to comment Share on other sites More sharing options...
Recommended Posts