stefauresi

Hi , I have the same hardware (baremetal) , how you have compile Redpill for DS920+ ? Best regards

Non-Volatile memory controller = NVMe 😉 Disk or DiskCache same result ......😢

Hi , With my Xpenology DS918+ (DSM7) I don't see nvme disk on storage manager 0000:03:00.0 Non-Volatile memory controller [0108]: Micron Technology Inc Device [1344:5405]

Hi, I need your help for create a volume on ssd nvme My ssd is not visible on DSM7 I need to fill this ? I not have this in my apollolake_user_config.json and my all SATA HDD (6) is ok "SasIdxMap": "0" "SataPortMap": "00" "DiskIdxMap": "00"

Hi, DSM918+ with Redpill (last) SSD nvme on PCIE adapter= KO Disk /dev/nvme0n1: 477 GiB, 512110190592 bytes, 1000215216 sectors Disk model: Micron 2300 NVMe 512GB Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x7741ef1c Device Boot Start End Sectors Size Id Type /dev/nvme0n1p1 256 4980735 4980480 2.4G fd Linux raid autodetect /dev/nvme0n1p2 4980736 9175039 4194304 2G fd Linux raid autodetect /dev/nvme0n1p3 9437184 1000206899 990769716 472.4G fd Linux raid autodetect I make an mkfs.btrfs -f /dev/md5 root@DiskStation:~# cat /proc/mdstat Personalities : [raid1] [raid0] md5 : active raid1 nvme0n1p3[0] 495383808 blocks super 1.2 [1/1] [U] After reboot md5 disappears a solution exists? Best regards

Hi, Thank you so much

Hello, A charitable soul could make a tutorial to compile Redpill Happy new year 2022

Hi everyone , I don't see if exist a tutorial for compile Redpill , i need your help Best regards

37€ in France for 10Gb 😉

Hi, The intel x520-DA2 is already include in Redpill loader ? I try inject ixgbe in https://github.com/pocopico/4.4.180plus-modules [ 266.390932] ixgbe: Unknown symbol dca_remove_requester (err 0) [ 266.391522] ixgbe: Unknown symbol dca_add_requester (err 0) [ 266.392063] ixgbe: Unknown symbol SynoSfpUnsupportNotifySet (err 0) [ 266.392683] ixgbe: Unknown symbol dca_unregister_notify (err 0) [ 266.393249] ixgbe: Unknown symbol dca_register_notify (err 0) [ 266.393802] ixgbe: Unknown symbol dcb_getapp (err 0) [ 266.394285] ixgbe: Unknown symbol dcb_setapp (err 0) [ 266.394763] ixgbe: Unknown symbol dca3_get_tag (err 0) [ 266.395278] ixgbe: Unknown symbol dcb_ieee_delapp (err 0) [ 266.395798] ixgbe: Unknown symbol dcb_ieee_setapp (err 0) [ 270.794070] ixgbe: Unknown symbol dca_remove_requester (err 0) [ 270.794670] ixgbe: Unknown symbol dca_add_requester (err 0) [ 270.795214] ixgbe: Unknown symbol SynoSfpUnsupportNotifySet (err 0) [ 270.795833] ixgbe: Unknown symbol dca_unregister_notify (err 0) [ 270.796404] ixgbe: Unknown symbol dca_register_notify (err 0) [ 270.796964] ixgbe: Unknown symbol dcb_getapp (err 0) [ 270.797480] ixgbe: Unknown symbol dcb_setapp (err 0) [ 270.798068] ixgbe: Unknown symbol dca3_get_tag (err 0) [ 270.798600] ixgbe: Unknown symbol dcb_ieee_delapp (err 0) [ 270.799136] ixgbe: Unknown symbol dcb_ieee_setapp (err 0) i have try to add 4 NIC but i see only 2 NIC (1Gb on motherboard) [ 0.844793] <redpill/cmdline_delegate.c:393> Param #9: |mac1=001100000000| [ 0.846423] <redpill/cmdline_delegate.c:393> Param #10: |mac2=001100000000| [ 0.848136] <redpill/cmdline_delegate.c:393> Param #11: |mac3=001100000000| [ 0.849854] <redpill/cmdline_delegate.c:393> Param #12: |mac4=001100000000| mac1&2 = real mac address (918+) Best regards

Hi, My motherboard have 2 NIC , if i try to inject atlantic.ko driver my ASUS 10Gb turn off , i need boot with disable nic (motherboard) but DSM 7 no load atlantic.ko driver when DSM start Best regards

Hi , Thx I don't see if exist an tuto for compile redpill ? I need add this modules for use my Asus 10Gb Nic Best regards

Hi, Question, Intel X520-DA1 driver is include ? (82599ES Chip) If i buy an Synology E10G18-T2 , this card is natively recognize ? Best regard

reboot DSM = lights it's ok on 10Gb NIC then after enter this command : insmod /usr/lib/modules/atlantic.ko = no lights I think is not a good driver for my 10Gb NIC

I don't seen message about atlantic

only see 2 NIC intel (motherboard) no lights is on , on my 10Gb NIC

0000:01:00.0 Class 0200: Device 1d6a:07b1 (rev 02) Subsystem: Device 1043:8741 Kernel driver in use: atlantic

depmod -a = -ash: depmod: command not found lsmod |grep -i atlantic = nothing insmod /usr/lib/modules/atlantic.ko lsmod |grep -i atlantic atlantic 200285 0 crc_itu_t 1531 2 udf,atlantic but no ethernet connexion other problem , if i put mac2:xxxxxxxxxx in grub.cfg , it is not supported , i show only mac1 in DSM

In DSM with SSH .conf in /usr/lib/modules-load.d/ .ko in /usr/lib/modules/ chmod 644 for .conf and .ko reboot and don't work

hi, I try this but it's not good for me why atlantic.ko in your archive = 10Mo and atlantic.ko for 6.2.3 = 185ko

Thanks , but i'am not a dev , where inject this driver in loader ?

My internet connection = 8G Switch mikrotik SFP+ 10G / with RJ45 ethernet module Yes 10G it's necessary for me 😉

ok DS918+ Loader redpill-DS918+_7.0.1-42214_b1630747150 - DSM 7.0.1-42214 Intel® I219V and Intel® I211AT it's ok but I want use my 10G ethernet

see my signature 😉

Hi, I need your help for add the driver for ASUS XG-C100C ( aquantia ) Best regard