Search the Community

Checking reviews of this board and see only one m.2 slot, there are pro4 version with one LAN port and two m.2.Does it works with pcie SSDs?Newer loader should accept m.2 ngff, as synology released expansion slot for those this year.Old loaders/DSMs supported just m.2 SATA spec SSDs.Using cache feature on few production systems.BTW cheap ASM1061 dual m.2 slot sata expansion boards works fine (50$),same as QNAP expansion board dual m.2 SATA (110$) but in has addinional cooling (yep, they are hot when used as cache 50-75C). Degraded by smart wear level for 30% past 12 month.Consumer grade SSDs (any way its mirrored and capped by SATA spec speed limit, 400MBps +/-) Off topic ,but maybe someone will find it useful.

Salut, - Carte mère : Z370M Pro4 ( mATX ) - Processeur : Intel i5-8600k

Salut, J'ai une carte graphique intégré ( ASRock Z370M PRO4 et i5-8600K ) et effectivement, j'ai regarder en ssh, ce dossier n'existe pas ( /dev oui, mais /dev/dri non ) Oui c'est bien ce tuto que j'ai suivi principalement.

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock B250 Pro4 / NIC I219-V / I7-6700K / 16Go

Mieux non, mais niveau prix/puissance c'est l'idéal. Pour 270€ tu as un i5-8600k, en Xeon a puissance équivalente tu en aura pour 400€ et la carte mère coûte plus cher ! Je viens de regarder se qu'il se fait en carte mère ATX actuellement, et mise apart celle ci : https://www.ldlc.com/fiche/PB00252851.html, la MSI H310-A PRO qui sort un peu du lot a cause de ses 6 ports PCI mais qui na que malheureusement que 4 SATA ( les ports PCI permette de metre des cartes d'extension SATA ) aux max 4 SATA / ports Mais très franchement je partirai sur celle ci : ASRock Z370M PRO4 mATX ou Gigabyte B360M HD3

Salut, Quel serait l'utilité de ton nas ? Pourquoi souhaite tu quelque chose de perfomant ? C'est pou faire du transcodage ? Si oui combien d'utilisateur simultané estime tu ? Voici ma conf : ASRock Z370M PRO4 mATX 118€ *** i5-8600k 240€ 8Go DDR4 117€ Alim Corsair CX430M 80+ 60€ Cela donne 535€ sans boitier pour une config qui peut au maximum supporté 4 transcodages 4K simultanées. En boitier, le Fractal Design Node 804 Noir me fait de l'oeil ( 8 emplacement 3"5 et 2 emplacements 2,5" ( ou visiblement il est possible d’adapter des 3.5" ) donc soit 10 emplacements mais il semble pour le moment en rupture partout *** La carte mère ne comporte que 6 emplacements SATA, pour plus il faut passer par se type d'extension : https://www.aliexpress.com/item/PCIe-PCI-Express-to-SATA3-0-2-Port-SATA-III-6G-Expansion-Controller-Card-Adapter/32816623176.html?spm=a2g0s.9042311.0.0.27424c4dZjrEFp

Hello, I'm trying to do a clean install first time I have the image file I updated the grub.cfg file and changed the VID and PID and Serial and added what I have as the mac address (new system board never used) it's a Asrock B360M Pro4 I did a Diskpart and cleaned the USB stick then I wrote the boot loader to it and placed it in the new system and started it up, it booted to grub and I selected the first option to run JUN's loader 1.03b for 3617xs I received the screen about after the screen stops updating you can go to find.synology.com which I did and found nothing, then I downloaded the Synology Assistant and ran that and still found nothing, so I must have missed a step or maybe the mother broad wont work with the loader Any Ideas ? Thanks .....

Hello, First time building a NAS I have built many desktop systems in the past. I plain on using the following hardware, ASRock B360M Pro4 LGA 1151 (300 Series) Intel B360 HDMI SATA 6Gb/s USB 3.1 Micro ATX Intel Motherboard PCIe NVMe Gen3x4 M.2 2280 240GB SSD (ASX8200NP-240GT-C) w/ Black XPG Heatsink 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2666 (PC4 21300) Intel X99 Platform Extreme Performance Memory Fractal Design Node 804 Black Window Aluminum/Steel MATX Cube Computer Case Intel Core I Plus i5+ 8500 Coffee Lake 6-Core 3.0 GHz (4.1 GHz Turbo) 65W BO80684I58500 Processor Intel UHD Graphics 630 EVGA 850 GQ POWER SUPPLY 2 2TB Drives 2 1TB Drives Need to decide on the OS and software ... I also want to have some VM's running but first want to get the NAS up and running and then PLEX I can have up to 64gig of memory which I'm thinking about maybe another 16 or 32 next since I would like to us the 16 gig I have now.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte Z370M D3H (Intel Core i3-8100)

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918p - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte Z370M D3H (Intel Core i3-8100)

Intel Core i7-8700K ASRock Z370M Pro4 Migrated DSM from 916+ to 918+. Tested to boot: ok Tested to video hardware transcode: not working (latest Plex Pass and Videostation) Would appreciate any feedback on the hardware transcoding? Activation looks okay with SN/MAC, maybe missing some codecs? {"success":true,"activated_codec":["h264_dec","h264_enc"],"token":"xxxxxxxxxxxxxxxxxxx"} I also ran this command: sudo synocodectool —activate_codec h264_dec --pkgname videostation reboot There were some errors like this in the logs: 2018-07-05T15:11:34+01:00 Syno synoscgi_SYNO.VideoStation2.Streaming_2_open[4635]: json_utils.cpp:147 Failed to parse json file [/tmp/VideoStation/enabled] 2018-07-05T15:15:19+01:00 Syno synoscgi_SYNO.VideoStation2.Streaming_1_stream[7036]: vte/adapt_streamer.cpp:48 Failed to hls transcoding 2018-07-05T15:15:27+01:00 Syno synoscgi_SYNO.VideoStation2.Streaming_1_stream[7102]: vte/adapt_streamer.cpp:48 Failed to hls transcoding 2018-07-05T15:15:43+01:00 Syno synoscgi_SYNO.VideoStation2.Streaming_1_stream[7294]: vte/adapt_streamer.cpp:48 Failed to hls transcoding I noticed the /dev/dri folder is missing? It was the same on 916+. No HW transcoding in Plex or Video Station.

Can you please try install the i5-4670t CPU to the Asrock b85m Pro4 motherboard and see if it works? So we can see if it's the problem with the motherboard or with the CPU (instructions library missing? maybe vt-d or Intel Trusted Execution Technology is needed for dsm to work?).

Now...Test again and it will not work.It is not visible on the network after booting. i3-4130, Asrock b85m Pro4(intel i217v) add.. i7-7700T, J3455 work fine

Yesterday I've tried the new DS918+-loader (v1.03a2) with a valid serial number and Mac-address on an Asrock B250M Pro4 (Intel i217 LAN) with Intel Pentium G4600, 8GB Ram and 1x128GB SSD (just for testing purposes). It looks that everything runs fine at the moment. #Pentium G4600 (Kaby Lake-S, 2x3,6GHz, Intel HD Graphics 630) tested to boot: ok tested to video hardware transcode: ok (latest Plex Pass and Videostation) Yesterday I realized that after a reboot the system wasn't on. Maybe it was because of some packages I've installed via CLI. Will test further if reboot is working properly. At the moment everything is ok.

Hello, I just test new loader 1.03a2. DSM 6.2 is install and fine on my configuration: ASrock Z370M Pro4, Pentium G5500. Everything work fine except support of LSI 9211-8i controler. I use it on my old xpenology project. Can I install driver for it ? Many thanks for your work.

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.6-15266 Update 1 - Loader version and model: Jun's Loader v1.02b - DS3615xs - Using custom extra.lzma: YES - extra.lzma for DS3617 v4.7 from IG-88 - Installation type: BAREMETAL - ASRock Z77-Pro4-M - Additional comments: REBOOT REQUIRED

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.6-15266 - Loader version and model: Jun's Loader v1.02b - DS3615xs - Using custom extra.lzma: YES - extra.lzma for DS3617 v4.7 from IG-88 - Installation type: BAREMETAL - ASRock Z77-Pro4-M - Additional comments: NO REBOOT REQUIRED

ASROCK B250M PRO4 изначально при старте вышел чуть по солидней и железа по больше будет 2x M.2/M-Key, 1x USB-C 3.0 *но не факт что сино будет это поддерживать на Gigabyte GA-B250M-DS3H просмотрел что LAN (Realtek RTL8111G) это у Gigabyte GA-B250M-D3H LAN (Intel I219-V)

Спасибо огромное! ну так Вы за ASROCK B250M PRO4 + Intel Pentium Gold G4560?

ASROCK B250M PRO4 или Gigabyte GA-B250M-DS3H не вопрос главное у них сетевая от интел

Блин, я только увидел это сообщение... его не было в топике... потом появился, извиняюсь может по недоглядел )) Значит я понял вы за такое сочетание ASROCK B250M PRO4 + Intel Pentium Gold G4560?

ASROCK B250M PRO4 + Intel Pentium Gold G4560

Видно не судьба мне на моем железе заюзать DSM 6.1.х. танцы с бубном (квест) продолжаются. Контроллер заменил на Adaptec RAID ASR-5405Z .Не помогло, крашиться драйвер при загрузке, хотя в списке он как бы поддерживаемый extra.lzma. Все предложенные варианты уважаемым IG-88 не помогли (, В общем у меня два пути, либо..(с)КП. Уважаемые гуру что скажите по поводу вот этих двух материнок. Выбор не большой в принципе, все упирается в количество портов SATA 1..Gigabyte GA-B75M-D3V LGA1155 есть проц I3 2100 и память для той материнки 2. GA-Z370M-D3H это на будущее так сказать ) Спасибо!

Hi. In order to familiarize myself with DSM, I got the DS3617sx bootloader working on an old Dell e6420 laptop without issues. I just cannot get the ds916+ bootloader to work on that same laptop. The laptop CPU is a Intel I5-2520M. I'm planning on putting together a custom-built NAS with the following specs: Mobo: ASRock Z370M-ITX/AC CPU: Intel Core i5-8400 RAM: 4GB HyperX Kingston Technology FURY 2400MHz DDR4 PSU: SilverStone 450W 80 Plus Gold Modular SFX 3 x 4TB WD Red HDD's in RAID 5 configuration As far as I understand, I want the ds916+ bootloader since it utilizes built-in CPU support for hardware transcoding (I'll be using the NAS as a Plex server amongst other things) Is there a reason why I cannot get ds916+ to work on the laptop and should I worry about it before attempting the custom-built NAS? Cheers.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.5-15254 Update 1 - Loader version and model: Jun's Loader v1.02b - DS3615xs - Using custom extra.lzma: YES - extra.lzma for DS3617 v4.5 from IG-88 - Installation type: BAREMETAL - ASRock Z77-Pro4-M - Additional comments: REBOOT REQUIRED, after update, refresh the img with v4.7 extra.lzma to the loader.