Search the Community

I'm currently trying to make a loader for the FS6400 (since the FS6400 supports a mix of sata and LSI, I learned from an article that the FS6400 uses two 9300-8i and sata controllers), but I get some kernel errors during the loader boot process, Can someone help? If there are lspci results for the FS6400 that would be the best.synology-fs6400-flashstation-nas-hardware-review [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.180+ (root@build16) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:16:19 CST 2021 [ 0.000000] Command line: BOOT_IMAGE=/zImage HddHotplug=0 withefi console=ttyS0,115200n8 DiskIdxMap=0F0004 netif_num=1 syno_hdd_detect=0 syno_port_thaw=1 SasIdxMap=0 vender_format_version=2 earlyprintk mac1=001132123456 syno_hdd_powerup_seq=0 pid=0x0001 log_buf_len=32M syno_hw_version=FS6400 vid=0x46f4 earlycon=uart8250,io,0x3f8,115200n8 sn=1130LWN123456 elevator=elevator root=/dev/md0 loglevel=15 SataPortMap=148 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000805fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000808000-0x000000000080ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000900000-0x00000000beec2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000beec3000-0x00000000befc4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000befc5000-0x00000000bf8edfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf8ee000-0x00000000bf9edfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf9ee000-0x00000000bfaedfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bfaee000-0x00000000bfb6dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfb6e000-0x00000000bfb7dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfb7e000-0x00000000bfbfdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfbfe000-0x00000000bfedbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfedc000-0x00000000bff5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bfffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001b6ffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xbf922000 ACPI=0xbfb7d000 ACPI 2.0=0xbfb7d014 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1b7000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 0800000000 mask 7800000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] e820: last_pfn = 0xbfedc max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x059a7000, 0x059a7fff] PGTABLE [ 0.000000] BRK [0x059a8000, 0x059a8fff] PGTABLE [ 0.000000] BRK [0x059a9000, 0x059a9fff] PGTABLE [ 0.000000] BRK [0x059aa000, 0x059aafff] PGTABLE [ 0.000000] BRK [0x059ab000, 0x059abfff] PGTABLE [ 0.000000] BRK [0x059ac000, 0x059acfff] PGTABLE [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 1043804(99%) [ 0.000000] RAMDISK: [mem 0x33aa7000-0x35d4afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BFB7D014 000024 (v02 BOCHS ) [ 0.000000] ACPI: XSDT 0x00000000BFB7C0E8 00005C (v01 BOCHS BXPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BFB78000 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000BFB79000 002D7D (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x00000000BFBDB000 000040 [ 0.000000] ACPI: APIC 0x00000000BFB77000 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x00000000BFB76000 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000BFB75000 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SRAT 0x00000000BFB74000 0000E8 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: WAET 0x00000000BFB73000 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: BGRT 0x00000000BFB72000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1b6ffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x1b6ffffff] -> [mem 0x00000000-0x1b6ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1b4ff8000-0x1b4ffbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001b6ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000000805fff] [ 0.000000] node 0: [mem 0x0000000000808000-0x000000000080ffff] [ 0.000000] node 0: [mem 0x0000000000900000-0x00000000beec2fff] [ 0.000000] node 0: [mem 0x00000000befc5000-0x00000000bf8edfff] [ 0.000000] node 0: [mem 0x00000000bfbfe000-0x00000000bfedbfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001b6ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001b6ffffff] [ 0.000000] On node 0 totalpages: 1534327 [ 0.000000] DMA zone: 59 pages used for memmap [ 0.000000] DMA zone: 1818 pages reserved [ 0.000000] DMA zone: 3757 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12204 pages used for memmap [ 0.000000] DMA32 zone: 781002 pages, LIFO batch:31 [ 0.000000] Normal zone: 11712 pages used for memmap [ 0.000000] Normal zone: 749568 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00806000-0x00807fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00810000-0x008fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeec3000-0xbefc4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf8ee000-0xbf9edfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf9ee000-0xbfaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfaee000-0xbfb6dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfb6e000-0xbfb7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfb7e000-0xbfbfdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfedc000-0xbff5ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff60000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xffbfffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801b4c00000 s95256 r8192 d31720 u524288 [ 0.000000] pcpu-alloc: s95256 r8192 d31720 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1508534 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage HddHotplug=0 withefi console=ttyS0,115200n8 DiskIdxMap=0F0004 netif_num=1 syno_hdd_detect=0 syno_port_thaw=1 SasIdxMap=0 vender_format_version=2 earlyprintk mac1=001132123456 syno_hdd_powerup_seq=0 pid=0x0001 log_buf_len=32M syno_hw_version=FS6400 vid=0x46f4 earlycon=uart8250,io,0x3f8,115200n8 sn=1130LWN123456 elevator=elevator root=/dev/md0 loglevel=15 SataPortMap=148 [ 0.000000] Internal netif num: 1 [ 0.000000] Vender format version: 2 [ 0.000000] Mac1: 001132123456 [ 0.000000] Synology Hardware Version: FS6400 [ 0.000000] Serial Number: 1130LWN123456 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 5854952K/6137308K available (5725K kernel code, 949K rwdata, 1820K rodata, 972K init, 1780K bss, 282356K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3599.966 MHz processor [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.93 BogoMIPS (lpj=3599966) [ 0.003190] pid_max: default: 32768 minimum: 301 [ 0.003525] ACPI: Core revision 20150930 [ 0.004673] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.005337] Security Framework initialized [ 0.005686] AppArmor: AppArmor initialized [ 0.006379] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008720] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010195] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.010776] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011150] Initializing cgroup subsys io [ 0.012006] Initializing cgroup subsys memory [ 0.012377] Initializing cgroup subsys devices [ 0.012719] Initializing cgroup subsys freezer [ 0.013033] CPU: Physical Processor ID: 0 [ 0.013371] CPU: Processor Core ID: 0 [ 0.022932] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.023001] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.023483] Speculative Store Bypass: Vulnerable [ 0.025483] Freeing SMP alternatives memory: 24K [ 0.026991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.036604] TSC deadline timer enabled [ 0.036934] smpboot: CPU0: Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xc) [ 0.037000] Performance Events: generic architected perfmon, full-width counters, Intel PMU driver. [ 0.037492] ... version: 2 [ 0.037784] ... bit width: 48 [ 0.038001] ... generic registers: 4 [ 0.038351] ... value mask: 0000ffffffffffff [ 0.038805] ... max period: 00007fffffffffff [ 0.039001] ... fixed-purpose events: 3 [ 0.039256] ... event mask: 000000070000000f [ 0.039818] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.040047] x86: Booting SMP configuration: [ 0.040399] .... node #0, CPUs: #1 #2 #3 [ 0.072010] x86: Booted up 1 node, 4 CPUs [ 0.072256] smpboot: Total of 4 processors activated (28799.72 BogoMIPS) [ 0.073063] devtmpfs: initialized [ 0.073436] PM: Registering ACPI NVS region [mem 0x00806000-0x00807fff] (8192 bytes) [ 0.074003] PM: Registering ACPI NVS region [mem 0x00810000-0x008fffff] (983040 bytes) [ 0.074496] PM: Registering ACPI NVS region [mem 0xbfb7e000-0xbfbfdfff] (524288 bytes) [ 0.075004] PM: Registering ACPI NVS region [mem 0xbff60000-0xbfffffff] (655360 bytes) [ 0.075574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.076007] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.076462] pinctrl core: initialized pinctrl subsystem [ 0.077063] NET: Registered protocol family 16 [ 0.082006] cpuidle: using governor ladder [ 0.086005] cpuidle: using governor menu [ 0.086333] ACPI: bus type PCI registered [ 0.086604] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.087049] PCI: Using configuration type 1 for base access [ 0.093072] ACPI: Added _OSI(Module Device) [ 0.093072] ACPI: Added _OSI(Processor Device) [ 0.093304] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.093618] ACPI: Added _OSI(Processor Aggregator Device) [ 0.094709] ACPI: Interpreter enabled [ 0.094931] ACPI: (supports S0 S4 S5) [ 0.096002] ACPI: Using IOAPIC for interrupt routing [ 0.096301] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.099758] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.100006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.100416] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.100883] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.101069] acpiphp: Slot [3] registered [ 0.102002] acpiphp: Slot [4] registered [ 0.102012] acpiphp: Slot [5] registered [ 0.102017] acpiphp: Slot [6] registered [ 0.102029] acpiphp: Slot [7] registered [ 0.103002] acpiphp: Slot [8] registered [ 0.103012] acpiphp: Slot [9] registered [ 0.103012] acpiphp: Slot [10] registered [ 0.104023] acpiphp: Slot [11] registered [ 0.104315] acpiphp: Slot [12] registered [ 0.104605] acpiphp: Slot [13] registered [ 0.104897] acpiphp: Slot [14] registered [ 0.105022] acpiphp: Slot [15] registered [ 0.105313] acpiphp: Slot [16] registered [ 0.105635] acpiphp: Slot [17] registered [ 0.106001] acpiphp: Slot [18] registered [ 0.106023] acpiphp: Slot [19] registered [ 0.106324] acpiphp: Slot [20] registered [ 0.107002] acpiphp: Slot [21] registered [ 0.107012] acpiphp: Slot [22] registered [ 0.107023] acpiphp: Slot [23] registered [ 0.107300] acpiphp: Slot [24] registered [ 0.108003] acpiphp: Slot [25] registered [ 0.108013] acpiphp: Slot [26] registered [ 0.108023] acpiphp: Slot [27] registered [ 0.109001] acpiphp: Slot [28] registered [ 0.109145] acpiphp: Slot [29] registered [ 0.109145] PCI host bridge to bus 0000:00 [ 0.109145] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.109409] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.109842] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.111001] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.111501] pci_bus 0000:00: root bus resource [mem 0x800000000-0x87fffffff window] [ 0.112001] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.112341] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.113017] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.113265] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.115002] pci 0000:00:01.1: reg 0x20: [io 0xd2c0-0xd2cf] [ 0.115899] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.116002] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.116445] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.116854] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.118070] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 [ 0.119819] pci 0000:00:01.2: reg 0x20: [io 0xd2a0-0xd2bf] [ 0.121000] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.121176] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.121597] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.122109] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 0.123319] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff pref] [ 0.126025] pci 0000:00:02.0: reg 0x18: [mem 0xc14c9000-0xc14c9fff] [ 0.128011] pci 0000:00:02.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.129012] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00 [ 0.129421] pci 0000:00:03.0: reg 0x10: [io 0xd200-0xd23f] [ 0.131265] pci 0000:00:03.0: reg 0x20: [mem 0x800000000-0x800003fff 64bit pref] [ 0.133000] pci 0000:00:07.0: [8086:2922] type 00 class 0x010601 [ 0.136248] pci 0000:00:07.0: reg 0x20: [io 0xd280-0xd29f] [ 0.137300] pci 0000:00:07.0: reg 0x24: [mem 0xc14c8000-0xc14c8fff] [ 0.138217] pci 0000:00:12.0: [8086:10d3] type 00 class 0x020000 [ 0.139002] pci 0000:00:12.0: reg 0x10: [mem 0xc14a0000-0xc14bffff] [ 0.139879] pci 0000:00:12.0: reg 0x14: [mem 0xc1480000-0xc149ffff] [ 0.140549] pci 0000:00:12.0: reg 0x18: [io 0xd260-0xd27f] [ 0.141333] pci 0000:00:12.0: reg 0x1c: [mem 0xc14c4000-0xc14c7fff] [ 0.144472] pci 0000:00:12.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] [ 0.145125] pci 0000:00:13.0: [8086:10d3] type 00 class 0x020000 [ 0.146482] pci 0000:00:13.0: reg 0x10: [mem 0xc1460000-0xc147ffff] [ 0.148572] pci 0000:00:13.0: reg 0x14: [mem 0xc1440000-0xc145ffff] [ 0.149325] pci 0000:00:13.0: reg 0x18: [io 0xd240-0xd25f] [ 0.150002] pci 0000:00:13.0: reg 0x1c: [mem 0xc14c0000-0xc14c3fff] [ 0.151776] pci 0000:00:13.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] [ 0.152208] pci 0000:00:18.0: [1b36:000d] type 00 class 0x0c0330 [ 0.152772] pci 0000:00:18.0: reg 0x10: [mem 0x800004000-0x800007fff 64bit] [ 0.154001] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400 [ 0.155377] pci 0000:00:1e.0: reg 0x10: [mem 0x800009000-0x8000090ff 64bit] [ 0.156196] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400 [ 0.156961] pci 0000:00:1f.0: reg 0x10: [mem 0x800008000-0x8000080ff 64bit] [ 0.159017] acpiphp: Slot [0] registered [ 0.159017] acpiphp: Slot [1] registered [ 0.159024] acpiphp: Slot [2] registered [ 0.159280] acpiphp: Slot [3-1] registered [ 0.159546] acpiphp: Slot [4-1] registered [ 0.160013] acpiphp: Slot [5-1] registered [ 0.160025] acpiphp: Slot [6-1] registered [ 0.160293] acpiphp: Slot [7-1] registered [ 0.160560] acpiphp: Slot [8-1] registered [ 0.161015] acpiphp: Slot [9-1] registered [ 0.161025] acpiphp: Slot [10-1] registered [ 0.161297] acpiphp: Slot [11-1] registered [ 0.162015] acpiphp: Slot [12-1] registered [ 0.162016] acpiphp: Slot [13-1] registered [ 0.162025] acpiphp: Slot [14-1] registered [ 0.162297] acpiphp: Slot [15-1] registered [ 0.163015] acpiphp: Slot [16-1] registered [ 0.163016] acpiphp: Slot [17-1] registered [ 0.163024] acpiphp: Slot [18-1] registered [ 0.163297] acpiphp: Slot [19-1] registered [ 0.164013] acpiphp: Slot [20-1] registered [ 0.164015] acpiphp: Slot [21-1] registered [ 0.164024] acpiphp: Slot [22-1] registered [ 0.164301] acpiphp: Slot [23-1] registered [ 0.165015] acpiphp: Slot [24-1] registered [ 0.165015] acpiphp: Slot [25-1] registered [ 0.165024] acpiphp: Slot [26-1] registered [ 0.165298] acpiphp: Slot [27-1] registered [ 0.166015] acpiphp: Slot [28-1] registered [ 0.166015] acpiphp: Slot [29-1] registered [ 0.167024] acpiphp: Slot [30] registered [ 0.167285] acpiphp: Slot [31] registered [ 0.167633] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.167938] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.168008] pci 0000:00:1e.0: bridge window [mem 0xc1200000-0xc13fffff] [ 0.168697] acpiphp: Slot [0-1] registered [ 0.168973] acpiphp: Slot [1-1] registered [ 0.169024] acpiphp: Slot [2-1] registered [ 0.169293] acpiphp: Slot [3-2] registered [ 0.169557] acpiphp: Slot [4-2] registered [ 0.170015] acpiphp: Slot [5-2] registered [ 0.170024] acpiphp: Slot [6-2] registered [ 0.170290] acpiphp: Slot [7-2] registered [ 0.170555] acpiphp: Slot [8-2] registered [ 0.171015] acpiphp: Slot [9-2] registered [ 0.171024] acpiphp: Slot [10-2] registered [ 0.171297] acpiphp: Slot [11-2] registered [ 0.171568] acpiphp: Slot [12-2] registered [ 0.172015] acpiphp: Slot [13-2] registered [ 0.172024] acpiphp: Slot [14-2] registered [ 0.172300] acpiphp: Slot [15-2] registered [ 0.172572] acpiphp: Slot [16-2] registered [ 0.173014] acpiphp: Slot [17-2] registered [ 0.173025] acpiphp: Slot [18-2] registered [ 0.173296] acpiphp: Slot [19-2] registered [ 0.174015] acpiphp: Slot [20-2] registered [ 0.174015] acpiphp: Slot [21-2] registered [ 0.174024] acpiphp: Slot [22-2] registered [ 0.174300] acpiphp: Slot [23-2] registered [ 0.175015] acpiphp: Slot [24-2] registered [ 0.175015] acpiphp: Slot [25-2] registered [ 0.175024] acpiphp: Slot [26-2] registered [ 0.175296] acpiphp: Slot [27-2] registered [ 0.176010] acpiphp: Slot [28-2] registered [ 0.176011] acpiphp: Slot [29-2] registered [ 0.176025] acpiphp: Slot [30-1] registered [ 0.177010] acpiphp: Slot [31-1] registered [ 0.177010] pci 0000:00:1f.0: PCI bridge to [bus 02] [ 0.177010] pci 0000:00:1f.0: bridge window [io 0xc000-0xcfff] [ 0.178009] pci 0000:00:1f.0: bridge window [mem 0xc1000000-0xc11fffff] [ 0.179061] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.179464] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.179860] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.180127] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.180509] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.181022] ACPI: Enabled 3 GPEs in block 00 to 0F [ 0.181104] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.181353] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.181824] vgaarb: loaded [ 0.182008] vgaarb: bridge control possible 0000:00:02.0 [ 0.182394] SCSI subsystem initialized [ 0.183031] libata version 3.00 loaded. [ 0.183289] pps_core: LinuxPPS API ver. 1 registered [ 0.183289] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.184001] PTP clock support registered [ 0.184034] EDAC MC: Ver: 3.0.0 [ 0.185072] EFI Variables Facility v0.08 2004-May-17 [ 0.185838] pstore: Registered efi as persistent store backend [ 0.186022] PCI: Using ACPI for IRQ routing [ 0.186520] PCI: pci_cache_line_size set to 64 bytes [ 0.187020] pci 0000:00:01.1: can't claim BAR 4 [io 0xd2c0-0xd2cf]: address conflict with PCI Bus 0000:01 [io 0xd000-0xdfff] [ 0.189010] pci 0000:00:01.2: can't claim BAR 4 [io 0xd2a0-0xd2bf]: address conflict with PCI Bus 0000:01 [io 0xd000-0xdfff] [ 0.190018] pci 0000:00:03.0: can't claim BAR 0 [io 0xd200-0xd23f]: address conflict with PCI Bus 0000:01 [io 0xd000-0xdfff] [ 0.191009] pci 0000:00:07.0: can't claim BAR 4 [io 0xd280-0xd29f]: address conflict with PCI Bus 0000:01 [io 0xd000-0xdfff] [ 0.192010] pci 0000:00:12.0: can't claim BAR 2 [io 0xd260-0xd27f]: address conflict with PCI Bus 0000:01 [io 0xd000-0xdfff] [ 0.194010] pci 0000:00:13.0: can't claim BAR 2 [io 0xd240-0xd25f]: address conflict with PCI Bus 0000:01 [io 0xd000-0xdfff] [ 0.195064] e820: reserve RAM buffer [mem 0x00806000-0x008fffff] [ 0.195749] e820: reserve RAM buffer [mem 0x00810000-0x008fffff] [ 0.196002] e820: reserve RAM buffer [mem 0xbeec3000-0xbfffffff] [ 0.196689] e820: reserve RAM buffer [mem 0xbf8ee000-0xbfffffff] [ 0.197003] e820: reserve RAM buffer [mem 0xbfedc000-0xbfffffff] [ 0.197678] e820: reserve RAM buffer [mem 0x1b7000000-0x1b7ffffff] [ 0.199263] clocksource: Switched to clocksource hpet [ 0.203060] AppArmor: AppArmor Filesystem Enabled [ 0.203599] pnp: PnP ACPI init [ 0.204034] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.204790] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.205619] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.206442] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.207264] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.208033] pnp 00:05: [dma 2] [ 0.208354] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.209170] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.210056] pnp: PnP ACPI: found 7 devices [ 0.218488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.219047] pci 0000:00:02.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.219656] pci 0000:00:12.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window [ 0.220323] pci 0000:00:13.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window [ 0.221519] pci 0000:00:12.0: BAR 6: assigned [mem 0xc1400000-0xc143ffff pref] [ 0.221972] pci 0000:00:13.0: BAR 6: assigned [mem 0xc1500000-0xc153ffff pref] [ 0.222444] pci 0000:00:02.0: BAR 6: assigned [mem 0xc14d0000-0xc14dffff pref] [ 0.222872] pci 0000:00:03.0: BAR 0: assigned [io 0x1000-0x103f] [ 0.223463] pci 0000:00:01.2: BAR 4: assigned [io 0x1040-0x105f] [ 0.224071] pci 0000:00:07.0: BAR 4: assigned [io 0x1060-0x107f] [ 0.224673] pci 0000:00:12.0: BAR 2: assigned [io 0x1080-0x109f] [ 0.225310] pci 0000:00:13.0: BAR 2: assigned [io 0x10a0-0x10bf] [ 0.225903] pci 0000:00:01.1: BAR 4: assigned [io 0x10c0-0x10cf] [ 0.226534] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.226837] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.227803] pci 0000:00:1e.0: bridge window [mem 0xc1200000-0xc13fffff] [ 0.228866] pci 0000:00:1f.0: PCI bridge to [bus 02] [ 0.229218] pci 0000:00:1f.0: bridge window [io 0xc000-0xcfff] [ 0.229861] pci 0000:00:1f.0: bridge window [mem 0xc1000000-0xc11fffff] [ 0.230995] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.231419] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.231792] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.232245] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 0.232657] pci_bus 0000:00: resource 8 [mem 0x800000000-0x87fffffff window] [ 0.233106] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.233450] pci_bus 0000:01: resource 1 [mem 0xc1200000-0xc13fffff] [ 0.233823] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.234191] pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc11fffff] [ 0.234579] NET: Registered protocol family 2 [ 0.234958] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.235532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.235986] TCP: Hash tables configured (established 65536 bind 65536) [ 0.236427] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.236799] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.237260] NET: Registered protocol family 1 [ 0.237783] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.238177] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.239381] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.250736] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.262104] pci 0000:00:02.0: Video device with shadowed ROM [ 0.284163] PCI: CLS 0 bytes, default 64 [ 0.682477] Trying to unpack rootfs image as initramfs... [ 0.692663] Freeing initrd memory: 35472K [ 0.695097] redpill: loading out-of-tree module taints kernel. [ 0.695502] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 0.696721] <redpill/redpill_main.c:45> ================================================================================================ [ 0.697605] <redpill/redpill_main.c:46> RedPill v0.5-git-2647685 loading... [ 0.698795] <redpill/call_protected.c:83> Got addr ffffffff81204510 for cmdline_proc_show [ 0.699342] <redpill/cmdline_delegate.c:322> Cmdline count: 391 [ 0.699694] <redpill/cmdline_delegate.c:389> Cmdline: BOOT_IMAGE=/zImage HddHotplug=0 withefi console=ttyS0,115200n8 DiskIdxMap=0F0004 netif_num=1 syno_hdd_detect=0 syno_port_thaw=1 SasIdxMap=0 vender_format_version=2 earlyprintk mac1=001132123456 syno_hdd_powerup_seq=0 pid=0x0001 log_buf_len=32M syno_hw_version=FS6400 vid=0x46f4 earlycon=uart8250,io,0x3f8,115200n8 sn=1130LWN123456 elevator=elevator root=/dev/md0 loglevel=15 SataPortMap=148 [ 0.699694] [ 0.702182] <redpill/cmdline_delegate.c:401> Param #0: |BOOT_IMAGE=/zImage| [ 0.702634] <redpill/cmdline_delegate.c:296> Option "BOOT_IMAGE=/zImage" not recognized - ignoring [ 0.703207] <redpill/cmdline_delegate.c:401> Param #1: |HddHotplug=0| [ 0.703636] <redpill/cmdline_delegate.c:296> Option "HddHotplug=0" not recognized - ignoring [ 0.704297] <redpill/cmdline_delegate.c:401> Param #2: |withefi| [ 0.704679] <redpill/cmdline_delegate.c:296> Option "withefi" not recognized - ignoring [ 0.705310] <redpill/cmdline_delegate.c:401> Param #3: |console=ttyS0,115200n8| [ 0.705736] <redpill/cmdline_delegate.c:296> Option "console=ttyS0,115200n8" not recognized - ignoring [ 0.706328] <redpill/cmdline_delegate.c:401> Param #4: |DiskIdxMap=0F0004| [ 0.706747] <redpill/cmdline_delegate.c:296> Option "DiskIdxMap=0F0004" not recognized - ignoring [ 0.707437] <redpill/cmdline_delegate.c:401> Param #5: |netif_num=1| [ 0.707830] <redpill/cmdline_delegate.c:239> Declared network ifaces # as 1 [ 0.708295] <redpill/cmdline_delegate.c:401> Param #6: |syno_hdd_detect=0| [ 0.708713] <redpill/cmdline_delegate.c:296> Option "syno_hdd_detect=0" not recognized - ignoring [ 0.709276] <redpill/cmdline_delegate.c:401> Param #7: |syno_port_thaw=1| [ 0.709673] <redpill/cmdline_delegate.c:211> Port thaw set to: 1 [ 0.710048] <redpill/cmdline_delegate.c:401> Param #8: |SasIdxMap=0| [ 0.710571] <redpill/cmdline_delegate.c:296> Option "SasIdxMap=0" not recognized - ignoring [ 0.711192] <redpill/cmdline_delegate.c:401> Param #9: |vender_format_version=2| [ 0.711685] <redpill/cmdline_delegate.c:296> Option "vender_format_version=2" not recognized - ignoring [ 0.712315] <redpill/cmdline_delegate.c:401> Param #10: |earlyprintk| [ 0.712716] <redpill/cmdline_delegate.c:296> Option "earlyprintk" not recognized - ignoring [ 0.713287] <redpill/cmdline_delegate.c:401> Param #11: |mac1=001132123456| [ 0.713724] <redpill/cmdline_delegate.c:284> Set MAC #1: 001132123456 [ 0.714236] <redpill/cmdline_delegate.c:401> Param #12: |syno_hdd_powerup_seq=0| [ 0.714660] <redpill/cmdline_delegate.c:296> Option "syno_hdd_powerup_seq=0" not recognized - ignoring [ 0.715287] <redpill/cmdline_delegate.c:401> Param #13: |pid=0x0001| [ 0.715782] <redpill/cmdline_delegate.c:142> PID override: 0x0001 [ 0.716180] <redpill/cmdline_delegate.c:401> Param #14: |log_buf_len=32M| [ 0.716657] <redpill/cmdline_delegate.c:296> Option "log_buf_len=32M" not recognized - ignoring [ 0.717258] <redpill/cmdline_delegate.c:401> Param #15: |syno_hw_version=FS6400| [ 0.717689] <redpill/cmdline_delegate.c:26> HW version set to: FS6400 [ 0.718204] <redpill/cmdline_delegate.c:401> Param #16: |vid=0x46f4| [ 0.718570] <redpill/cmdline_delegate.c:108> VID override: 0x46f4 [ 0.718939] <redpill/cmdline_delegate.c:401> Param #17: |earlycon=uart8250,io,0x3f8,115200n8| [ 0.719508] <redpill/cmdline_delegate.c:296> Option "earlycon=uart8250,io,0x3f8,115200n8" not recognized - ignoring [ 0.720179] <redpill/cmdline_delegate.c:401> Param #18: |sn=1130LWN123456| [ 0.720591] <redpill/cmdline_delegate.c:45> S/N set to: 1130LWN123456 [ 0.721077] <redpill/cmdline_delegate.c:401> Param #19: |elevator=elevator| [ 0.721484] <redpill/cmdline_delegate.c:296> Option "elevator=elevator" not recognized - ignoring [ 0.722014] <redpill/cmdline_delegate.c:401> Param #20: |root=/dev/md0| [ 0.722412] <redpill/cmdline_delegate.c:296> Option "root=/dev/md0" not recognized - ignoring [ 0.722908] <redpill/cmdline_delegate.c:401> Param #21: |loglevel=15| [ 0.723327] <redpill/cmdline_delegate.c:296> Option "loglevel=15" not recognized - ignoring [ 0.723852] <redpill/cmdline_delegate.c:401> Param #22: |SataPortMap=148| [ 0.724298] <redpill/cmdline_delegate.c:296> Option "SataPortMap=148" not recognized - ignoring [ 0.724807] <redpill/cmdline_delegate.c:360> Add cmdline blacklist "vid=" @ 0 [ 0.725256] <redpill/cmdline_delegate.c:361> Add cmdline blacklist "pid=" @ 1 [ 0.725707] <redpill/cmdline_delegate.c:362> Add cmdline blacklist "mfg" @ 2 [ 0.726156] <redpill/cmdline_delegate.c:363> Add cmdline blacklist "dom_szmax=" @ 3 [ 0.726604] <redpill/cmdline_delegate.c:364> Add cmdline blacklist "elevator=" @ 4 [ 0.727067] <redpill/cmdline_delegate.c:365> Add cmdline blacklist "loglevel=" @ 5 [ 0.727560] <redpill/cmdline_delegate.c:366> Add cmdline blacklist "log_buf_len=" @ 6 [ 0.728040] <redpill/cmdline_delegate.c:367> Add cmdline blacklist "earlyprintk" @ 7 [ 0.728688] <redpill/cmdline_delegate.c:368> Add cmdline blacklist "syno_port_thaw=" @ 8 [ 0.729210] <redpill/cmdline_delegate.c:422> CmdLine processed successfully, tokens=23 [ 0.729682] <redpill/runtime_config.c:187> Found platform definition for "FS6400" [ 0.730178] <redpill/runtime_config.c:198> Validating runtime config... [ 0.730565] <redpill/runtime_config.c:48> Configured boot device type to USB [ 0.730975] <redpill/runtime_config.c:207> Config validation resulted in OK [ 0.731426] <redpill/runtime_config.c:224> Runtime config populated [ 0.731796] <redpill/uart_fixer.c:72> Registering UART fixer shim [ 0.734221] <redpill/call_protected.c:107> Got addr ffffffff81942290 for early_serial_setup [ 0.734706] <redpill/uart_fixer.c:54> Fixed muted ttyS0 to hw port @ 3f8 [ 0.735161] <redpill/uart_fixer.c:86> Successfully registered UART fixer shim [ 0.735646] <redpill/scsi_notifier.c:164> Registering SCSI device notifier [ 0.736088] <redpill/scsi_notifier.c:181> The sd driver is not ready to dispatch SCSI device notifier events - awaiting driver [ 0.736827] <redpill/intercept_driver_register.c:215> Registered driver_register() watcher for "sd" driver (coming=1, live=0) [ 0.737692] <redpill/intercept_driver_register.c:219> Registered the first driver_register watcher - starting watching [ 0.738395] <redpill/intercept_driver_register.c:161> Starting intercept of driver_register() [ 0.738890] <redpill/override_symbol.c:257> Overriding driver_register() with driver_register_shim [redpill]()<ffffffffa0005a2f> [ 0.740853] <redpill/override_symbol.c:172> Saved driver_register() ptr <ffffffff813c6950> [ 0.741493] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffff813c6950+12/1 (<<ffffffff813c6000) [ 0.742463] <redpill/call_protected.c:84> Got addr ffffffff81048800 for flush_tlb_all [ 0.743014] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.743583] <redpill/override_symbol.c:182> Generating trampoline [ 0.743942] <redpill/override_symbol.c:187> Generated trampoline to driver_register_shim+0x0/0x27e [redpill]<ffffffffa0005a2f> for driver_register<ffffffff813c6950>: [ 0.744008] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.745407] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.745839] <redpill/memory_helper.c:33> Enabling memory protection for page(s) at ffffffff813c6950+12/1 (<<ffffffff813c6000) [ 0.746551] <redpill/override_symbol.c:269> Successfully overrode driver_register() with trampoline to driver_register_shim+0x0/0x27e [redpill]<ffffffffa0005a2f> [ 0.747445] <redpill/intercept_driver_register.c:168> driver_register() is now intercepted [ 0.747934] <redpill/scsi_notifier.c:192> Successfully registered SCSI device notifier [ 0.748422] <redpill/sata_port_shim.c:116> Registering SATA port emulator shim [ 0.748842] <redpill/sata_port_shim.c:120> Registering for new devices notifications [ 0.749318] <redpill/scsi_notifier.c:149> scsi_disk_probe_handler+0x0/0x20 [redpill] (priority=-2147483648) subscribed to SCSI device events [ 0.750077] <redpill/sata_port_shim.c:127> Iterating over existing devices [ 0.750482] <redpill/sata_port_shim.c:134> Successfully registered SATA port emulator shim [ 0.750965] <redpill/boot_device_shim.c:48> Registering boot device router shim [ 0.751429] <redpill/usb_boot_shim.c:229> Registering USB boot device shim [ 0.751834] <redpill/usb_boot_shim.c:194> Registered usbcore module notifier [ 0.754211] <redpill/usb_boot_shim.c:247> Successfully registered USB boot device shim [ 0.754682] <redpill/boot_device_shim.c:76> Successfully registered boot device router shim [ 0.755231] <redpill/intercept_execve.c:103> Registering execve() interceptor [ 0.755655] <redpill/override_symbol.c:257> Overriding SyS_execve() with SyS_execve_shim [redpill]()<ffffffffa00006f0> [ 0.756863] <redpill/override_symbol.c:172> Saved SyS_execve() ptr <ffffffff8119a270> [ 0.757351] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffff8119a270+12/1 (<<ffffffff8119a000) [ 0.758049] <redpill/override_symbol.c:207> Obtaining lock for <SyS_execve+0x0/0x40/ffffffff8119a270> [ 0.758595] <redpill/override_symbol.c:182> Generating trampoline [ 0.758954] <redpill/override_symbol.c:187> Generated trampoline to SyS_execve_shim+0x0/0x10 [redpill]<ffffffffa00006f0> for SyS_execve<ffffffff8119a270>: [ 0.759022] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff8119a270> [ 0.760298] <redpill/override_symbol.c:207> Released lock for <ffffffff8119a270> [ 0.760730] <redpill/memory_helper.c:33> Enabling memory protection for page(s) at ffffffff8119a270+12/1 (<<ffffffff8119a000) [ 0.761497] <redpill/override_symbol.c:269> Successfully overrode SyS_execve() with trampoline to SyS_execve_shim+0x0/0x10 [redpill]<ffffffffa00006f0> [ 0.762303] <redpill/intercept_execve.c:112> execve() interceptor registered [ 0.762713] <redpill/bios_shim.c:243> Registering mfgBIOS shim [ 0.763082] <redpill/override_symbol.c:257> Overriding apply_relocate_add() with _apply_relocate_add [redpill]()<ffffffffa0002af0> [ 0.763865] <redpill/override_symbol.c:172> Saved apply_relocate_add() ptr <ffffffff8103cef0> [ 0.764401] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffff8103cef0+12/1 (<<ffffffff8103c000) [ 0.765136] <redpill/override_symbol.c:207> Obtaining lock for <apply_relocate_add+0x0/0x1b0/ffffffff8103cef0> [ 0.765718] <redpill/override_symbol.c:182> Generating trampoline [ 0.766099] <redpill/override_symbol.c:187> Generated trampoline to _apply_relocate_add+0x0/0x150 [redpill]<ffffffffa0002af0> for apply_relocate_add<ffffffff8103cef0>: [ 0.766099] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff8103cef0> [ 0.767489] <redpill/override_symbol.c:207> Released lock for <ffffffff8103cef0> [ 0.767921] <redpill/memory_helper.c:33> Enabling memory protection for page(s) at ffffffff8103cef0+12/1 (<<ffffffff8103c000) [ 0.768690] <redpill/override_symbol.c:269> Successfully overrode apply_relocate_add() with trampoline to _apply_relocate_add+0x0/0x150 [redpill]<ffffffffa0002af0> [ 0.771571] <redpill/bios_shim.c:170> Registered bios module notifier [ 0.771951] <redpill/bios_shim.c:253> Successfully registered mfgBIOS shim [ 0.772391] <redpill/disable_exectutables.c:15> Registering common executables disabler shim [ 0.772883] <redpill/intercept_execve.c:57> Filename uboot_do_upd.sh will be blocked from execution [ 0.773454] <redpill/intercept_execve.c:57> Filename ./uboot_do_upd.sh will be blocked from execution [ 0.773991] <redpill/intercept_execve.c:57> Filename /usr/syno/bin/syno_pstore_collect will be blocked from execution [ 0.774661] <redpill/intercept_execve.c:57> Filename /tmpData/upd@te/sas_fw_upgrade_tool will be blocked from execution [ 0.775341] <redpill/disable_exectutables.c:28> Successfully registered common executables disabler shim [ 0.775903] <redpill/block_fw_update_shim.c:67> Registering firmware update blocker shim [ 0.776418] <redpill/intercept_execve.c:57> Filename ./H2OFFT-Lx64 will be blocked from execution [ 0.776936] <redpill/block_fw_update_shim.c:45> Saved backup DMI: Standard PC (i440FX + PIIX, 1996) [ 0.777524] <redpill/block_fw_update_shim.c:75> Successfully registered firmware update blocker shim [ 0.778095] <redpill/pci_shim.c:203> Registering PCI devices shim [ 0.778481] <redpill/pci_shim.c:205> Creating vPCI devices for FS6400 [ 0.778860] <redpill/pci_shim.c:211> Calling vdev_add_MARVELL_88SE9235 [redpill] with B:D:F=09:00:00 mf=0 [ 0.779450] <redpill/virtual_pci.c:420> Attempting to add vPCI device [printed below] @ bus=09 dev=00 fn=00 [ 0.780040] <redpill/virtual_pci.c:260> Printing PCI descriptor @ ffff8801ad23b1c0 [ 0.780568] [ 0.780568] 31***********0***ADDR******************* [ 0.780943] 92 35 1b 4b | 0x00 [ 0.781192] 00 00 00 00 | 0x04 [ 0.781406] 01 06 01 11 | 0x08 [ 0.781623] 00 00 00 00 | 0x0C [ 0.781839] 00 00 00 00 | 0x10 [ 0.782085] 00 00 00 00 | 0x14 [ 0.782313] 00 00 00 00 | 0x18 [ 0.782528] 00 00 00 00 | 0x1C [ 0.782743] 00 00 00 00 | 0x20 [ 0.782958] 00 00 00 00 | 0x24 [ 0.783200] 00 00 00 00 | 0x28 [ 0.783414] 00 00 00 00 | 0x2C [ 0.783633] 00 00 00 00 | 0x30 [ 0.783849] 00 00 00 00 | 0x34 [ 0.784090] 00 00 00 00 | 0x38 [ 0.784322] ff ff 00 ff | 0x3C [ 0.784563] PCI host bridge to bus 0001:09 [ 0.784814] pci_bus 0001:09: root bus resource [io 0x0000-0xffff] [ 0.785212] pci_bus 0001:09: root bus resource [mem 0x00000000-0x7fffffffff] [ 0.785625] pci_bus 0001:09: root bus resource [bus 00-ff] [ 0.785782] <redpill/call_protected.c:101> Got addr ffffffff811a4d30 for getname [ 0.786369] <redpill/call_protected.c:98> Got addr ffffffff8119a070 for do_execve [ 0.786904] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.787329] <redpill/virtual_pci.c:488> Linux >=v4.1 quirk: calling pci_bus_add_devices(bus) manually [ 0.787937] <redpill/virtual_pci.c:492> Added device with new bus @ bus=09 dev=00 fn=00 [ 0.788468] <redpill/pci_shim.c:224> vPCI device 1 created successfully [ 0.788864] <redpill/pci_shim.c:211> Calling vdev_add_MARVELL_88SE9235 [redpill] with B:D:F=0c:00:00 mf=0 [ 0.789465] <redpill/virtual_pci.c:420> Attempting to add vPCI device [printed below] @ bus=0c dev=00 fn=00 [ 0.790061] <redpill/virtual_pci.c:260> Printing PCI descriptor @ ffff8801ad23b200 [ 0.790505] [ 0.790505] 31***********0***ADDR******************* [ 0.790883] 92 35 1b 4b | 0x00 [ 0.791134] 00 00 00 00 | 0x04 [ 0.791351] 01 06 01 11 | 0x08 [ 0.791570] 00 00 00 00 | 0x0C [ 0.791786] 00 00 00 00 | 0x10 [ 0.792015] 00 00 00 00 | 0x14 [ 0.792260] 00 00 00 00 | 0x18 [ 0.792474] 00 00 00 00 | 0x1C [ 0.792689] 00 00 00 00 | 0x20 [ 0.792904] 00 00 00 00 | 0x24 [ 0.793143] 00 00 00 00 | 0x28 [ 0.793358] 00 00 00 00 | 0x2C [ 0.793572] 00 00 00 00 | 0x30 [ 0.793787] 00 00 00 00 | 0x34 [ 0.794015] 00 00 00 00 | 0x38 [ 0.794241] ff ff 00 ff | 0x3C [ 0.794474] PCI host bridge to bus 0001:0c [ 0.794735] pci_bus 0001:0c: root bus resource [io 0x0000-0xffff] [ 0.795145] pci_bus 0001:0c: root bus resource [mem 0x00000000-0x7fffffffff] [ 0.795568] pci_bus 0001:0c: busn_res: can not insert [bus 0c-ff] under domain [bus 00-ff] (conflicts with (null) [bus 09-ff]) [ 0.796290] pci_bus 0001:0c: root bus resource [bus 00-ff] [ 0.796627] pci 0001:0c:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.797025] <redpill/virtual_pci.c:488> Linux >=v4.1 quirk: calling pci_bus_add_devices(bus) manually [ 0.797614] <redpill/virtual_pci.c:492> Added device with new bus @ bus=0c dev=00 fn=00 [ 0.798132] <redpill/pci_shim.c:224> vPCI device 2 created successfully [ 0.798533] <redpill/pci_shim.c:227> Successfully registered PCI devices shim [ 0.798970] <redpill/smart_shim.c:1030> Registering SMART emulator shim [ 0.800780] <redpill/smart_shim.c:1040> SCSI driver exists - installing canary [ 0.801271] <redpill/override_symbol.c:257> Overriding sd_ioctl() with sd_ioctl_canary [redpill]()<ffffffffa0002220> [ 0.803277] <redpill/override_symbol.c:172> Saved sd_ioctl() ptr <ffffffff81414540> [ 0.803730] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffff81414540+12/1 (<<ffffffff81414000) [ 0.804507] <redpill/override_symbol.c:207> Obtaining lock for <sd_ioctl+0x0/0x240/ffffffff81414540> [ 0.805061] <redpill/override_symbol.c:182> Generating trampoline [ 0.805424] <redpill/override_symbol.c:187> Generated trampoline to sd_ioctl_canary+0x0/0x70 [redpill]<ffffffffa0002220> for sd_ioctl<ffffffff81414540>: [ 0.806057] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff81414540> [ 0.806742] <redpill/override_symbol.c:207> Released lock for <ffffffff81414540> [ 0.807205] <redpill/memory_helper.c:33> Enabling memory protection for page(s) at ffffffff81414540+12/1 (<<ffffffff81414000) [ 0.807892] <redpill/override_symbol.c:269> Successfully overrode sd_ioctl() with trampoline to sd_ioctl_canary+0x0/0x70 [redpill]<ffffffffa0002220> [ 0.808722] <redpill/smart_shim.c:1052> Successfully registered SMART emulator shim [ 0.809195] <redpill/pmu_shim.c:344> Registering PMU emulator shim [ 0.809558] <redpill/virtual_uart.c:987> Adding vUART ttyS1 [ 0.809890] <redpill/virtual_uart.c:645> Initializing ttyS1 vUART [ 0.810297] <redpill/virtual_uart.c:661> Initialized ttyS1 vUART [ 0.810649] <redpill/virtual_uart.c:799> Registering ttyS1 (io=0x2f8) in the driver [ 0.811162] <redpill/virtual_uart.c:753> serial8250 driver is not ready - the port addition will be delayed until the driver loads [ 0.811853] <redpill/intercept_driver_register.c:215> Registered driver_register() watcher for "serial8250" driver (coming=0, live=1) [ 0.812608] <redpill/virtual_uart.c:808> The serial8250 driver is not ready - vUART port ttyS1 (io=0x2f8) will be activated later [ 0.813311] <redpill/vuart_virtual_irq.c:66> Enabling vIRQ for ttyS1 [ 0.813801] <redpill/vuart_virtual_irq.c:101> vIRQ fully enabled for for ttyS1 [ 0.814708] <redpill/virtual_uart.c:1004> Added vUART at ttyS1 [ 0.815446] <redpill/virtual_uart.c:931> Setting TX callback for for ttyS1 (line=1) [ 0.816385] <redpill/virtual_uart.c:945> Added TX callback for ttyS1 (line=1) [ 0.817255] <redpill/pmu_shim.c:361> Successfully registered PMU emulator shim [ 0.818145] <redpill/sanitize_cmdline.c:89> Cmdline param "syno_port_thaw=1" blacklisted - skipping [ 0.819247] <redpill/sanitize_cmdline.c:89> Cmdline param "earlyprintk" blacklisted - skipping [ 0.820295] <redpill/sanitize_cmdline.c:89> Cmdline param "pid=0x0001" blacklisted - skipping [ 0.821205] <redpill/sanitize_cmdline.c:89> Cmdline param "log_buf_len=32M" blacklisted - skipping [ 0.821756] <redpill/sanitize_cmdline.c:89> Cmdline param "vid=0x46f4" blacklisted - skipping [ 0.822347] <redpill/sanitize_cmdline.c:89> Cmdline param "elevator=elevator" blacklisted - skipping [ 0.822914] <redpill/sanitize_cmdline.c:89> Cmdline param "loglevel=15" blacklisted - skipping [ 0.823536] <redpill/sanitize_cmdline.c:102> Sanitized cmdline to: BOOT_IMAGE=/zImage HddHotplug=0 withefi console=ttyS0,115200n8 DiskIdxMap=0F0004 netif_num=1 syno_hdd_detect=0 SasIdxMap=0 vender_format_version=2 mac1=001132123456 syno_hdd_powerup_seq=0 syno_hw_version=FS6400 earlycon=uart8250,io,0x3f8,115200n8 sn=1130LWN123456 root=/dev/md0 SataPortMap=148 [ 0.829450] <redpill/override_symbol.c:257> Overriding cmdline_proc_show() with cmdline_proc_show_filtered [redpill]()<ffffffffa0000c40> [ 0.830863] <redpill/override_symbol.c:172> Saved cmdline_proc_show() ptr <ffffffff81204510> [ 0.831399] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffff81204510+12/1 (<<ffffffff81204000) [ 0.832136] <redpill/override_symbol.c:207> Obtaining lock for <cmdline_proc_show+0x0/0x20/ffffffff81204510> [ 0.832709] <redpill/override_symbol.c:182> Generating trampoline [ 0.833076] <redpill/override_symbol.c:187> Generated trampoline to cmdline_proc_show_filtered+0x0/0x20 [redpill]<ffffffffa0000c40> for cmdline_proc_show<ffffffff81204510>: [ 0.833102] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff81204510> [ 0.834507] <redpill/override_symbol.c:207> Released lock for <ffffffff81204510> [ 0.834940] <redpill/memory_helper.c:33> Enabling memory protection for page(s) at ffffffff81204510+12/1 (<<ffffffff81204000) [ 0.835695] <redpill/override_symbol.c:269> Successfully overrode cmdline_proc_show() with trampoline to cmdline_proc_show_filtered+0x0/0x20 [redpill]<ffffffffa0000c40> [ 0.836596] <redpill/sanitize_cmdline.c:138> /proc/cmdline sanitized [ 0.836978] <redpill/ioscheduler_fixer.c:24> Resetting I/O scheduler to default [ 0.839372] <redpill/call_protected.c:110> Got addr ffffffff8193965a for elevator_setup [ 0.839843] <redpill/redpill_main.c:69> RedPill v0.5-git-2647685 loaded successfully (stealth=1) [ 0.841875] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.842306] software IO TLB: mapped [mem 0xb7f1e000-0xbbf1e000] (64MB) [ 0.843132] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "alarmtimer" found, calling original driver_register() [ 0.844152] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffff813c6950+12/1 (<<ffffffff813c6000) [ 0.844885] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.845511] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.846025] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.846505] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.847132] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.847636] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.848185] audit: initializing netlink subsys (disabled) [ 0.848523] audit: type=2000 audit(1645381650.848:1): initialized [ 0.848988] Initialise system trusted keyring [ 0.857710] VFS: Disk quotas dquot_6.6.0 [ 0.858024] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.911218] Key type asymmetric registered [ 0.911497] Asymmetric key parser 'x509' registered [ 0.911827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.912336] io scheduler noop registered [ 0.912598] io scheduler deadline registered [ 0.912902] io scheduler cfq registered (default) [ 0.913276] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "pcieport" found, calling original driver_register() [ 0.914298] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.914881] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.915392] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.915870] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.916508] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.917039] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.917514] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "aer" found, calling original driver_register() [ 0.918409] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.918979] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.919482] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.919931] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.920566] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.921087] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.921534] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "pcie_pme" found, calling original driver_register() [ 0.922466] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.923070] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.923552] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.924019] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.924647] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.925168] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.925635] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "dpc" found, calling original driver_register() [ 0.926534] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.927137] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.927619] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.928107] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.928703] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.929238] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.929682] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "i2c" found, calling original driver_register() [ 0.930591] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.931242] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.931720] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.932217] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.932806] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.933332] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.933787] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.934161] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "pciehp" found, calling original driver_register() [ 0.935069] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.935647] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.936170] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.936616] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.937236] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.937736] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.938234] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.938640] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "button" found, calling original driver_register() [ 0.939566] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.940176] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.940651] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.941178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.941655] ACPI: Power Button [PWRF] [ 0.941904] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.942549] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.943076] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.943548] <redpill/intercept_driver_register.c:93> driver_register() interception active - no handler observing "hardware_error_device" found, calling original driver_register() [ 0.944552] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.945160] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 0.945636] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 0.946128] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 0.946732] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 0.947263] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 0.947722] GHES: HEST is not enabled! [ 0.996583] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.020113] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.020619] console [ttyS0] enabled [ 1.020619] console [ttyS0] enabled [ 1.021076] bootconsole [uart0] disabled [ 1.021076] bootconsole [uart0] disabled [ 1.158059] <redpill/intercept_driver_register.c:98> driver_register() interception active - calling handler serial8250_ready_watcher+0x0/0x20 [redpill]<ffffffffa00018d0> for "serial8250" [ 1.159298] <redpill/override_symbol.c:239> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 1.159907] <redpill/override_symbol.c:246> Writing original code to <ffffffff813c6950> [ 1.160450] <redpill/override_symbol.c:239> Released lock for <ffffffff813c6950> [ 1.160927] <redpill/override_symbol.c:207> Obtaining lock for <driver_register+0x0/0xd0/ffffffff813c6950> [ 1.161647] <redpill/override_symbol.c:217> Writing trampoline code to <ffffffff813c6950> [ 1.162188] <redpill/override_symbol.c:207> Released lock for <ffffffff813c6950> [ 1.162641] <redpill/intercept_driver_register.c:141> Calling for DWATCH_STATE_LIVE [ 1.163193] <redpill/virtual_uart.c:697> serial8250 driver loaded - adding queued ports [ 1.163676] <redpill/virtual_uart.c:706> Processing enqueued port 1 [ 1.164078] <redpill/virtual_uart.c:799> Registering ttyS1 (io=0x2f8) in the driver [ 1.164666] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.165216] IP: [<ffffffff81592cdf>] _raw_spin_lock_irqsave+0xf/0x30 [ 1.165606] PGD 0 [ 1.165613] Oops: 0002 [#1] SMP [ 1.165613] Modules linked in: redpill(OE) [ 1.165613] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G OE 4.4.180+ #42218 [ 1.165613] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 1.165613] task: ffff8801ad558000 ti: ffff8801ad53c000 task.ti: ffff8801ad53c000 [ 1.165613] RIP: 0010:[<ffffffff81592cdf>] [<ffffffff81592cdf>] _raw_spin_lock_irqsave+0xf/0x30 [ 1.165613] RSP: 0018:ffff8801ad53fc88 EFLAGS: 00010046 [ 1.165613] RAX: 0000000000000000 RBX: 0000000000000046 RCX: 00000000000002ff [ 1.165613] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000 [ 1.165613] RBP: ffff8801ad53fc90 R08: ffff8800bf589380 R09: ffff8801ae401b00 [ 1.165613] R10: ffffea0006b5a2c0 R11: 00000000456ab484 R12: 0000000000000002 [ 1.165613] R13: ffffffffa001c510 R14: ffffffff81b669f0 R15: ffffffff81b669f0 [ 1.165613] FS: 0000000000000000(0000) GS:ffff8801b4d80000(0000) knlGS:0000000000000000 [ 1.165613] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.165613] CR2: 0000000000000000 CR3: 000000000560a000 CR4: 00000000003606f0 [ 1.165613] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.165613] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.165613] Stack: [ 1.165613] 0000000000000001 ffff8801ad53fcc0 ffffffffa0001334 0000000000000001 [ 1.165613] 0000000000000000 ffffffff818a5220 ffffffff81b669f0 ffff8801ad53fd08 [ 1.165613] ffffffff813a8a7a ffffffff811966d3 0000000000000202 ffff8801ad6f3b00 [ 1.165613] Call Trace: [ 1.165613] [<ffffffffa0001334>] serial_remote_read+0x34/0x230 [redpill] [ 1.165613] [<ffffffff813a8a7a>] serial8250_config_port+0x2ea/0xda0 [ 1.165613] [<ffffffff811966d3>] ? cdev_dynamic_release+0x23/0x30 [ 1.165613] [<ffffffff813a3253>] uart_add_one_port+0x163/0x4a0 [ 1.165613] [<ffffffff812ea816>] ? kobject_put+0x26/0x50 [ 1.165613] [<ffffffff81390cf6>] ? tty_port_tty_get+0x46/0x80 [ 1.165613] [<ffffffff813a2847>] ? uart_remove_one_port+0x137/0x160 [ 1.165613] [<ffffffff819077ea>] ? initcall_blacklist+0xaa/0xaa [ 1.165613] [<ffffffff813a6022>] serial8250_register_8250_port+0x332/0x820 [ 1.165613] [<ffffffff819077ea>] ? initcall_blacklist+0xaa/0xaa [ 1.165613] [<ffffffffa0007b67>] update_serial8250_isa_port+0x1cb/0x236 [redpill] [ 1.165613] [<ffffffffa0007c7d>] serial8250_ready_watcher.cold+0xab/0xd9 [redpill] [ 1.165613] [<ffffffffa0005c90>] driver_register_shim+0x261/0x27e [redpill] [ 1.165613] [<ffffffff813c7aa1>] __platform_driver_register+0x31/0x40 [ 1.165613] [<ffffffff81942254>] serial8250_init+0x116/0x152 [ 1.165613] [<ffffffff8194213e>] ? serial8250_isa_init_ports+0x2d5/0x2d5 [ 1.165613] [<ffffffff810003b7>] do_one_initcall+0x87/0x1a0 [ 1.165613] [<ffffffff81907ffb>] kernel_init_freeable+0x15e/0x1f1 [ 1.165613] [<ffffffff8158db00>] ? rest_init+0x80/0x80 [ 1.165613] [<ffffffff8158db09>] kernel_init+0x9/0xe0 [ 1.165613] [<ffffffff8159342f>] ret_from_fork+0x3f/0x80 [ 1.165613] [<ffffffff8158db00>] ? rest_init+0x80/0x80 [ 1.165613] Code: c0 74 05 e8 b4 40 b0 ff 48 89 d8 5b 5d c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 9c 5b fa 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 06 48 89 d8 5b 5d c3 89 c6 e8 ec 2c b0 ff [ 1.165613] RIP [<ffffffff81592cdf>] _raw_spin_lock_irqsave+0xf/0x30 [ 1.165613] RSP <ffff8801ad53fc88> [ 1.165613] CR2: 0000000000000000 [ 1.165613] ---[ end trace fe94e4f36bf1a169 ]--- [ 1.446417] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.446417] [ 1.447195] Kernel Offset: disabled [ 1.447388] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009

Я тут немного пропустил ситуацию @dmitrydvk с подключением eSATA. У него, правда, всё решилось, но я не понял как именно. Возможно, eSATA определился как внутренний при перезагрузке? Надо, думаю, написать небольшой гайд. Коротко на пальцах: есть девайсы с разным механизмом перечисления портов. Более старый, в bromolow, broadwell, broadwellnk, в частности, классические 3615xs/3617xs/3622xs, используют SataPortMap. Для того, чтобы назначить eSATA диск как eSATA, с возможностью безопасного отключения, нужно в /etc/synoinfo.conf (и в /etc.defaults/synoinfo.conf) записать esataportcfg: 0x10 // esata для 5го диска, он же внешний esata internalportcfg: 0x2f // sata для 1,2,3,4 и 6 дисков, 4 в салазках и один вместо дисковода usbportcfg: 0x1fc0 На практике в TCRP/Arc это делается при установке, там есть отдельное меню synoinfo, в нём эти переменные и их значения и прописываются. Более новые девайсы, в частности v1000 / 1621+, используют DeviceTree, там порты настраиваются не через internalportcfg/esataportcfg, а запекаются в файл model.dtb. Порядок действий, как я его помню (гайд, которым я пользовался, сдох вместе с репой arpl-i18n): Загрузиться в систему (возможно, нужно загрузиться со всеми подключёнными дисками, включая eSATA) Скачать файл /etc/model.dtb. Дизассемблить его. Нужна програмка dtc, есть под линукс (пакет device-tree-compiler) и под винду https://github.com/lbmeng/dtc. См. мануал https://manpages.ubuntu.com/manpages/xenial/man1/dtc.1.html . Примерно, кажется, так: dtc -I dtb -O dts -o model.dts model.dtb В получившемся файле .dts находим наши sata порты и правим пятый на esata: Было: internal_slot@4 { protocol_type = "sata"; ahci { pcie_root = "00:11.0"; ata_port = <0x03>; }; }; internal_slot@5 { protocol_type = "sata"; ahci { pcie_root = "00:11.0"; ata_port = <0x04>; }; }; Стало: internal_slot@4 { protocol_type = "sata"; ahci { pcie_root = "00:11.0"; ata_port = <0x03>; }; }; esata_port@1 { ahci { pcie_root = "00:11.0"; ata_port = <0x04>; }; }; Ещё, наверно, нужно поменять нумерацию шестого, но я его не использую и не проверял. То, что написано в ahci — это железо, эти числа не трогаем., так что для шестого, по-видимому будет просто internal_slot@6 → internal_slot@5. После этого скармливаем правленный model.dts загрузчику. Я, повторюсь, это делал на arpl-i18n, там это было в меню Advanced config.

Друзья подскажите пожалуйста где копать после установки DS3615xs и перезагрузки пишет "НЕ НАЙДЕН ЖЕСТКИЙ ДИСК" внизу пишет "Перед повторным подключением установите жесткий диск", при этом сама установка происходит нормально и на дисках создаются разделы... Пробовал разные загрузчики 6 версии, пробовал удалять все на дисках disk director acronis Сервер HP Proliant DL380 G7, установлен HBA dell perc H200 Решил дело в дисках и попробовать на дисках с другого сервера Сервер HP Proliant DL380 G5, тоже самое, НО самое главное теперь на этом сервере тоже самое пинет при загрузке что диск не найден.... Контроллер дисков установлен в слот 5, почитал на этом форуме что это нужно прописывать в загрузчике SataPortMap но так и не понял зачем и почему при установке диски определяются а после нет....

Помогите, такая же проблема. Полгода работало нормально, потом долго простоял выключенным, сейчас снова понадобился - "На DS3615xs не найден жесткий диск". DSM не помню какой, то ли 6.1.7 то ли 6.2, загрузчик 1.03b Железо HP ML110 G7, штатный sata-контроллер, стоят 6*2Tb в Synology Hybrid RAID (SHR). AHCI/Legacy в биосе менял, ничего не изменилось (подозреваю что батарейка села и настройки биоса слетели т.к. время было сбито, правда первый раз он загрузился правильно - с флешки, а вот второй раз как по дефолту - с флоппи. Загадка почему так...). Прочитал про SataPortMap и при появлении меню выбора режима загрузки DSM, нажал "с" и ввел "append Data Port Map=42" т.к. думал что у меня 2 контроллера на 4 и 2 диска, но тогда сервер при загрузке даже ip перестал получать, в инете нашел что контроллер всё-же один, на 6 дисков, прописал "append Data Port Map=6" - по крайней мере вернулась веб-морда с "На DS3615xs не найден жесткий диск". При появлении меню выбора режима загрузки DSM, нажал "с" и ввел "ls", результат на фото. Подскажите куда копать? п.с. флешки под рукой нет, на днях найду, поставлю убунту, гляну что по дискам она видит. Инфа не супер важная, но всё же ценная. Нужно сохранить.

Hi, I am trying to upgrade from DSM 6 to 7. Is there a way to lookup my SataPortMap sata_remap and DiskIdxMap values in my current DSM 6 installation? I am asking because the "./rploader.sh satamap" command always tells me I have bad drives configuration and install will fail. Is there any risk in connecting my array drives and booting a misconfigured loader? How will I know that all the disks are seen before I hit that migrate button in the UI? Thanks!

Hi all, Hope you are all well at this very strage moment in history. So, the topic... I am running: VMware ESXi-6.7.0-20191204001-standard-customized (VMware, Inc.) DSM 6.2.2-24922 Update 6, 3617xs HP Microserver Gen8/E3-1220 V2, Latest firmware and iLO HP P420 PCIe RAID w/ 4x HDD, RDM - ready to attach to VM (tested an working) HP Cougar Point AHCI w/ 2x SSD - passthrough, connected to VM Install and update was flawless, I set the following in grub.cfg: set sn=xxxxxxxxxxxxx set mac1=xxxxxxxxxxx DiskIdxMap=0C00 SataPortMap=1 Post install, the boot drive is hidden and my disk numbering starts at my second disk (SATA 1:0) I have my data disks set to RDM and have tested them with this config, the connect as disks 2,3,4,5 (SATA 1:1, 1:2, 1:3, 1:4) I have disconeccted them while i figure out this issue (they ar not in the screenshots) The issue: My passthrough for the AHCI starts at disk number 33 and only one SSD is present, both are connected (see attached pic), both SSD work fine and were attached and visible in ESX prior to enabling passthrough. I would like the 2x SSD in passthrough visible in DSM so I can setup SSD caches, however I need some pointers on what I am doing wrong. I am guessing it is something to do with SataPortMap? Can anybody help this dude under quaratine, opr likewise, if you have any questions about this etup, fire away

Hi, Currently, I have a motherboard: GA-B85M-DS3H, it has 4 x SATA3 + 2 SATA2, total of 6 drives, it can support. CPU is an Intel i7-4770 CPU based on socket 1150, Haswell architecture. This motherboard support hot-swappable drives in the BIOS/UEFI. So, in order to take advantage this feature, I need have 6 drives connected during DSM installation? I am about to start 1st installation of DSM 7.x, however after reading the is information about selecting the hardware: DSM 7.x Loaders and Platforms - Tutorials and Guides - XPEnology Community I windows user for many years, not a linux pro. so naturally, I a bit confused about these terminologies: 1) SataPortMap 2) DiskIdxMap 3) device tree Questions: 1) If I am to select the architecture: apollolake, DS918+, how many drive would it be display within DSM, the number = 4, right? 2) Can appollolake, DS918+ supports more than 4 drives, but cosmetically, it can only show 4 drives? 3) What happen if I can a extra HBA into the PCI-E x16 slot, which can support 4 more drives, same issue, it will only shows 4 drives? 4) How to map out drives? 5) What is RAIDF1 support means? Thank you.

I have server board Intel S1200V3RP with Xeon E3-1230v3, 32GB RAM, controller LSI SAS 2008 (1000:0072, subsystem [1734:1177] which is Fujitsu, flashed to IT. I was unable to finish the 10.0 TCRP process, but with 9.4.9c WITHOUT update/fullupgrade - just serialgen, identifyusb and realmac, I was able to build DS3622xs+ version 7.1.1-42962 update 1. I have one drive on SATA port and some drives on HBA. The SataPortMap was properly detected as 58, as the board has 5 onboard SATA ports and the HBA is 8-channel. Everything works fine, until power off. On cold start, BIOS sees all drives as well as those on the HBA, however after boot, only the drive on the onboard SATA is visible. Listing PCI, the device is seen, but no kernel driver associated. 0000:00:1f.3 Class [0c05]: Device [8086:8c22] (rev 05) Subsystem: Device [8086:35b5] Kernel driver in use: i801_smbus 0000:00:1f.6 Class [1180]: Device [8086:8c24] (rev 05) Subsystem: Device [8086:35b5] 0000:02:00.0 Class [0104]: Device [1000:0072] (rev 03) Subsystem: Device [1734:1177] ******* Kernel driver in use: mpt3sas 0000:03:00.0 Class [0300]: Device [102b:0522] (rev 05) DeviceName: ServerEngines Pilot III Subsystem: Device [8086:0103] The asterisked line is missing. However, lsmod shows mpt3sas module. After warm reboot, the mpt3sas driver gets loaded and disks are visible. Minor consequences are that controllers order probably changes due to missing driver, because drives enumeration changes and the SataPortMap is therefore wrong. But this is not the issue for now, I just need fix the stability of the boot process before I will proceed with loading some valuable data. I tried even patch DSM to update 6, which was success without any touching of the loader, but behavior is the same. Any idea?

Hello everyone ! I'm an mechanical engineer. I have basic knowledge of IT/coding. I'm new to the Xpenology/Synology experience ! I really enjoy the learning experience and the DIY side of the Xpenology. The reason why I started this is because I found TrueNAS hard to set the way I wanted. English isn't my mother tongue, I'm trying my best to be readable I own a laptop ASUS ROG for gaming, an old DELL R720 rack server for VMs and testing, an old HP G1 Tower with a current "NAS" that is just 3 drives shared over smb and a plex server on top. I just bought some stuff to start my xpenology journey : MotherBoard ASUS P8C WS Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz 16Gb RAM DDR3 LSI-SAS9300-16i IT mode 5x2Tb WD enterprise 1x6Tb WD RED Fractal Define R5 (it's a really silent case) So far I have tested on my ESXi (R720) the Tinycore-Redpill (DS2422+) from @Peter Suh entirely on a VM with vdisks, remote access over my domain, email alerts, 2FA for users, Drive, Photo, PLEX, Tailscale and Docker. (https://github.com/PeterSuh-Q3/tinycore-redpill) I am starting to build the NAS like this : ESXi 7u3 DSM with passtrough both SAS (9300-16i have 2 chips so 2 SAS to passtrough ?!) and front case USB passtrough Install of ESXi is pretty straight forward as I already done it for the R720. Starting and installing DSM with TCRP works (but I don't have the sames options as I had on the R720, maybe it's the passtrough) Setting the disks is my task now and I'm kinda stuck. I managed to make it work with fisrt disk starting at position 1 in the DSM GUI. but 2 days ago 1 disk failed (only in DSM, It works otherwise) then I unplugged the wrong drive because disk4 wasn't my 4th drive anymore. My setup was : SataPortMap=088 DiskIdxMap=0C0008 I started again from scratch. I now have a working ESXi 7u3 and a bootable TCRP. See you around

Hi, sorry for the long time. I was traveling for business. Here my feedback after 2 month of running ARPL-i18n v23.9.7 DS918+ 6.2(25556u7) (yes, latest u7) on IntelN100 with ASM1166 PCIx4 add-on The system is rock stable and fast responding, I could load config export from a DS415play (x86/32bit Intel Atom) The setup of the disks was at first trick, the documentation is a bit thin, had to read and try some time until it works. Also working the PCIe-NVMe "hack" for M2.E+B slot SSD as read cache - BUT only when patching manually, the script does not work ( xpenology.com/forum/topic/13342-nvme-cache-support/page/3/#comment-126807) But I did switch to use 2x SATA-SSD as read and write cache, the write performance on small files improved from 6mb/s to 38mb/s (using small file test from Microsoft disk benchmark tool) In 5 weeks I did run multiple 4-5 day CPU burn in tests, also I transferred 35TB+ files to and from the NAS via the onboard 1GBit nic. Update from my todo list in post #1: My 3x10TB disks where moved successful from my legacy Syno-Hardware, including encrypted folders The M2.WiFi Sata Adapter did not work. the Board/Chipset only supports Intel CNVi WiFi Adapter (but all of them, not only latest gen) My current Hardware: Asrock N100DC-ITX board with Intel N100 4xE-Core Cpu (no HT) - powered by 19V Laptop PSU r8169 onboard GBit NIC 32 GB Ram (Samsung, from the compatibility list of Asrock!) 2x SATA on board with 256GB Sata-SSD for Read/Write cache PCIx4 Sata-Card 6-ports with ASM1166 chip 3x 10TB Exos Seagate disks on Sata Add-In Controler (4k/512n sectors) DS 918+ DSM 6.2.4-update7 25556u7 An finally a dump of my config: Model: DSM918+ Version: 6.2 Addons: nvmecache: hdddb codecpatch misc addincards acpid storagepanel reboottoarpl Modules: mii r8169 -> Modules setting: Priority use of official drivers: true User Commandline: SataPortMap: 26 Model inherent cmdline: HddHotplug: 0 syno_hdd_detect: 0 syno_hdd_powerup_seq: 0 vender_format_version: 2 elevator: elevator Sysinfo entries: usbportcfg: 0x0000003F00 │ maxdisks: 14 │ netif_seq: 0 1 2 3 4 5 6 7 │ support_disk_compatibility: no │support_memory_compatibility: no │ support_syno_hybrid_raid: │supportraidgroup: │ internalportcfg: 0x000000003F │ support_led_brightness_adjustment: no │ buzzeroffen: 0xffff │ maxlanport: 8 | esataportcfg: 0x00000000C0 │ support_leds_lp3943: (to get sysinfo entries for disk mapping use the sheet with macros, if you can not find it send me PM, my setup is for 2xSata on-board controller 1, 6xSata on controller 2, 6x USB disks) Advanced Options: Switch LKM version: prod │ Switch direct boot: false │ Timeout of get ip in boot: 30 │ Timeout of boot wait: 10 │ kernel switching method: kexec

pas sur que le loader soit compatible avec la VMM, il l'est avec VMWare ESxi, VMWare Player (ou Workstation), KVM, proxmox mais VMM jamais utilisé dsl. As-tu essayer avec autre modèle que DS3622xs+? As-tu essayer avec un autre loader ? Pour le sataportmap, il faut éditer la config avant le build

Bonjour, je souhaite tester tinycore-redpill.v0.10.0.0.vmdk en VMM mais l'assistant Synologie ne trouve pas les disques durs, j'ai créé 2 disques de 30go au format SATA. Je pense que SataPortMap et DiskIdxMap ne sont pas bons pour moi, mais je ne sais pas comment vérifier ou éventuellement modifier si nécessaire ? Merci

It seems that HBA is being used in Dell r720xd. DS4021xs+ is based on the same Broadwellnk platform as DS3622xs+. These are the settings from flyride recommended for HBA. If you use TCRP-mshell, we recommend DDSML rather than EUDEV. With the settings below, disks will appear starting from storage bay 0. "SataPortMap": "12", "DiskIdxMap": "1000", "SasIdxMap: "0" "MaxDisks: "24"

И еще что прописано в SataPortMap?

I can get a basic build working following the tutorial here wundertech.net &nbsp;how-to-install-xpenology-on-proxmox-dsm-7 This gets DSM running on the Proxmox storage drive. I'm now trying to rebuild (from scratch), passing an Adaptec 72405 (24 port card set to HBA mode) through - hoping that DSM will still install on the VM drive and the disks on the Adaptec card are then seen as additional storage (to create storage pools etc). I only need/want to use (the first) 20 ports on the card (the remaining 4 ports are not connected to any drives or backplane). When booting into Redpill and DSM: DSM fails to spot the 20G VM disk The drives on the Adaptec card start from slot 3 Only 14 of the 15 drives I currently have installed are picked up. My initial attempts at changing the SataPortMap, DiskIdxMap and MaxDisks values has resulted in no disks showing, or crashing the Adaptec card. (requiring a complete power down to recover on one occasion). I've had a few other issues which I think I have now resolved. My ask is: How can I get the build working using the VM sata1 drive? What values should I try for SataPortMap, DiskIdxMap and MaxDisks? This is the hardware setup in Proxmox This is the satamap output (I manually set maxdisks to 24 in user_config before running satamap)

Здравствуйте. Устанавливаю DSM виртуалкой на ESX 6.7 с аппаратным пробросом SAS контроллера и SAS + SATA дисками и не могу понять, как DSM 7 маппит харды. Вот у меня была (и есть) DSM 6.2 DS3617, в которой я прописал единожды через Synoinfo параметры Maxdisks, sataports и esataports сразу с запасом на 16 хардов, а потом со временем просто добавлял винчестеры в корзину - и они появлялись в DSM. Там у меня было просто - контроллер LSI, на 16 портов, к которому подключены по 1 накопителю на порт. В новой машине у меня Adaptec 8405 в режиме HBA + экспандер Adaptec 82888T, к которому буду подключать суммарно 30 накопителей, причём разных: SAS, SATA, HDD, SSD и думаю NVME SSD через виртуальный диск VMware. Установил TRPC 8 с образом DSM3622xs+ 7.1-42661. И вот что имею. Сейчас я могу к новому серверу подключить всего 7 аппаратных дисков, но я хочу убедиться, что и 36 она увидит. Я добавляю виртуальные HDD в виртуалку - больше 16 дисков суммарно не видит. (всего подключено 18, один из них под TRPC, второй просто повесил на SATA0:0 чтобы на него DSM поставить). Как мне заранее убедиться, что новые диски, которые я буду переносить из старого сервера под DSM 6.2 в новый под DSM 7.1 увидятся? Сколько бы я ни добавлял виртуальных дисков, загрузчик при команде satamap now выдаёт: Sataportmap=1 DiskIdxmap=10 И всё равно больше 16 дисков она не видит: Куда копать-то? Можно вообще достичь на DSM 7.1 беспроблемной установки 24-32 дисков, чтобы без перезагрузок, без перекомпилирования загрузчика работало? Может там прописать какие параметры с запасом?

[ 0.091203] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.091509] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.091814] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.092119] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.092425] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.092730] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.093035] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.093341] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.093646] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.093952] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.094289] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.094649] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.094977] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.095319] ACPI: IRQ0 used by override. [ 0.095522] ACPI: IRQ9 used by override. [ 0.095725] Using ACPI (MADT) for SMP configuration information [ 0.096031] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.096298] TSC deadline timer available [ 0.096502] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.096768] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.097165] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.097556] PM: hibernation: Registered nosave memory: [mem 0x39f99000-0x3a898fff] [ 0.097947] PM: hibernation: Registered nosave memory: [mem 0x434af000-0x452fefff] [ 0.098338] PM: hibernation: Registered nosave memory: [mem 0x452ff000-0x45b2efff] [ 0.098729] PM: hibernation: Registered nosave memory: [mem 0x45b2f000-0x45bfefff] [ 0.099120] PM: hibernation: Registered nosave memory: [mem 0x45c00000-0x49ffffff] [ 0.099510] PM: hibernation: Registered nosave memory: [mem 0x4a000000-0x4a1fffff] [ 0.099901] PM: hibernation: Registered nosave memory: [mem 0x4a200000-0x4a3fffff] [ 0.100291] PM: hibernation: Registered nosave memory: [mem 0x4a400000-0x4affffff] [ 0.100682] PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x503fffff] [ 0.101073] PM: hibernation: Registered nosave memory: [mem 0x50400000-0xfe00ffff] [ 0.101463] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.101855] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff] [ 0.102248] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.102638] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff] [ 0.103029] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.103420] [mem 0x50400000-0xfe00ffff] available for PCI devices [ 0.103737] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.106862] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:8 nr_node_ids:1 [ 0.107380] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u262144 [ 0.107723] pcpu-alloc: s176664 r8192 d32232 u262144 alloc=1*2097152 [ 0.108052] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.108286] Built 1 zonelists, mobility grouping on. Total pages: 4074138 [ 0.108645] Policy zone: Normal [ 0.108808] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.111059] Synology Hardware Version: SA6400 [ 0.111292] Internal netif num: 2 [ 0.111481] Mac2: 94DE806D73B4 [ 0.111644] Mac1: 001132C7F4BE [ 0.111803] Serial Number: 1980PDN028952 [ 0.112012] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.112716] Vender format version: 2 [ 0.113400] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.114044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.114507] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.139885] Memory: 15942936K/16555320K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 612128K reserved, 0K cma-reserved) [ 0.140645] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.140987] ftrace: allocating 32589 entries in 128 pages [ 0.148606] ftrace: allocated 128 pages with 1 groups [ 0.148928] rcu: Hierarchical RCU implementation. [ 0.149174] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=8. [ 0.149515] Rude variant of Tasks RCU enabled. [ 0.149749] Tracing variant of Tasks RCU enabled. [ 0.149996] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.150391] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.153104] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16 [ 0.153862] Console: colour dummy device 80x25 [ 0.154101] ACPI: Core revision 20200925 [ 0.154670] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.155235] APIC: Switch to symmetric I/O mode setup [ 0.155492] DMAR: Host address width 39 [ 0.155690] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.155966] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.156438] DMAR: DRHD base: 0x000000fed84000 flags: 0x0 [ 0.156715] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157124] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.157438] DMAR: dmar2: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157847] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff [ 0.158171] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 2 [ 0.158536] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.158814] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.160997] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.161283] x2apic enabled [ 0.161484] Switched APIC routing to cluster x2apic. [ 0.166436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.171205] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 0.171785] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200) [ 0.172785] pid_max: default: 32768 minimum: 301 [ 0.173040] LSM: Security Framework initializing [ 0.173299] AppArmor: AppArmor initialized [ 0.173542] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173805] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.174362] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.174815] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.175148] process: using mwait in idle threads [ 0.175390] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.175785] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.176092] Speculative Store Bypass: Vulnerable [ 0.176439] Freeing SMP alternatives memory: 32K [ 0.176839] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1) [ 0.177434] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.177786] ... version: 5 [ 0.177992] ... bit width: 48 [ 0.178203] ... generic registers: 8 [ 0.178410] ... value mask: 0000ffffffffffff [ 0.178684] ... max period: 00007fffffffffff [ 0.178785] ... fixed-purpose events: 4 [ 0.178992] ... event mask: 0001000f000000ff [ 0.179323] rcu: Hierarchical SRCU implementation. [ 0.179942] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.180348] smp: Bringing up secondary CPUs ... [ 0.180622] x86: Booting SMP configuration: [ 0.180786] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.186163] smp: Brought up 1 node, 8 CPUs [ 0.186293] smpboot: Max logical packages: 1 [ 0.186786] smpboot: Total of 8 processors activated (38707.20 BogoMIPS) [ 0.188006] devtmpfs: initialized [ 0.188042] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 0.188050] PM: Registering ACPI NVS region [mem 0x452ff000-0x45b2efff] (8585216 bytes) [ 0.189284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.189789] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.190182] pinctrl core: initialized pinctrl subsystem [ 0.190569] NET: Registered protocol family 16 [ 0.190835] audit: initializing netlink subsys (disabled) [ 0.191120] audit: type=2000 audit(1700704115.031:1): state=initialized audit_enabled=0 res=1 [ 0.191120] thermal_sys: Registered thermal governor 'step_wise' [ 0.191265] cpuidle: using governor ladder [ 0.191999] cpuidle: using governor menu [ 0.192214] ACPI: bus type PCI registered [ 0.192214] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.192828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.193309] PCI: not using MMCONFIG [ 0.193492] PCI: Using configuration type 1 for base access [ 0.194802] Kprobes globally optimized [ 0.195006] ACPI: Added _OSI(Module Device) [ 0.195018] ACPI: Added _OSI(Processor Device) [ 0.195018] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.195032] ACPI: Added _OSI(Processor Aggregator Device) [ 0.195311] ACPI: Added _OSI(Linux-Dell-Video) [ 0.195541] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.195785] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.236734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.237786] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.238228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.238607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.238785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.239225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.239604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.240785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.241226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.241604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.241785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.242226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.242605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.243785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.244228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.244607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.244785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.245226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.245605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.246785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.247225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.247604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.247785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.248226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.248604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.249785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.250225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.250604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.250785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.251226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.251690] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.252785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.253225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.253604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.253785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.254226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.254604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.255785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.256225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.256604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.256785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.257226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.257650] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.258785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.259225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.259603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.259785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.260226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.260604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.260785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.261225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.261604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.262785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.263226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.263605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.263785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.264225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.264603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.265785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.266225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.266604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.266785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.267227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.267604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.268785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.269225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.269607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.269785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.270226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.270607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.271785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.272225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.272687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.272785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.273227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.273605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.274785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.275225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.275687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.275785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.276226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.276603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.277785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.278226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.278689] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.278785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.279226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.279604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.280785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.281225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.281605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.281785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.282226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.282605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.283785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.284226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.284605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.284785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.285226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.285603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.286785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.287226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.287605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.287785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.288227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.288606] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.288785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.289226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.289604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.290785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.291226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.291604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.291785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.292225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.292604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.293785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.294226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.294604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.294785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.295228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.296179] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPD0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.296741] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.297785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.298175] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPL1], AE_NOT_FOUND (20200925/dswload2-162) [ 0.298738] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.298785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.299590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.299785] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.300205] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.300788] ACPI: 19 ACPI AML tables successfully acquired and loaded [ 0.301697] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.302787] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.303394] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.303793] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.309803] ACPI: Dynamic OEM Table Load: [ 0.310026] ACPI: SSDT 0xFFFF88810104B000 0001C6 (v02 PmRef Cpu0Psd 00003000 INTL 20160422) [ 0.311210] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.313331] ACPI: Dynamic OEM Table Load: [ 0.313551] ACPI: SSDT 0xFFFF888101542C00 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.314721] ACPI: Dynamic OEM Table Load: [ 0.314789] ACPI: SSDT 0xFFFF888100CCD000 0005C3 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.316203] ACPI: Dynamic OEM Table Load: [ 0.316422] ACPI: SSDT 0xFFFF888101543000 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.317806] ACPI: Dynamic OEM Table Load: [ 0.318028] ACPI: SSDT 0xFFFF8881010E4000 0008E7 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.319482] ACPI: Dynamic OEM Table Load: [ 0.319697] ACPI: SSDT 0xFFFF888100CCE800 00048A (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.321753] ACPI: Dynamic OEM Table Load: [ 0.321789] ACPI: SSDT 0xFFFF888100CCF000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20160422) [ 0.323193] ACPI: Dynamic OEM Table Load: [ 0.323413] ACPI: SSDT 0xFFFF888100CCF800 00048A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.327502] ACPI: EC: EC started [ 0.327678] ACPI: EC: interrupt blocked [ 0.328164] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.328428] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.328785] ACPI: Interpreter enabled [ 0.328986] ACPI: (supports S0 S4 S5) [ 0.329179] ACPI: Using IOAPIC for interrupt routing [ 0.329462] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.332261] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources [ 0.332728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335432] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.338715] ACPI: Power Resource [BTPR] (on) [ 0.339406] ACPI: Power Resource [PAUD] (on) [ 0.345820] ACPI: Power Resource [V0PR] (on) [ 0.346129] ACPI: Power Resource [V1PR] (on) [ 0.346427] ACPI: Power Resource [V2PR] (on) [ 0.348250] ACPI: Power Resource [PXTC] (on) [ 0.348666] ACPI: Power Resource [PTPL] (on) [ 0.349149] ACPI: Power Resource [PXTC] (on) [ 0.349814] ACPI: Power Resource [PXTC] (on) [ 0.351989] ACPI: Power Resource [WRST] (on) [ 0.357430] ACPI: Power Resource [TBT0] (on) [ 0.357791] ACPI: Power Resource [TBT1] (on) [ 0.357816] ACPI: Power Resource [D3C] (on) [ 0.473844] ACPI: Power Resource [FN00] (off) [ 0.474231] ACPI: Power Resource [FN01] (off) [ 0.474804] ACPI: Power Resource [FN02] (off) [ 0.474892] ACPI: Power Resource [FN03] (off) [ 0.475242] ACPI: Power Resource [FN04] (off) [ 0.476805] ACPI: Power Resource [PIN] (off) [ 0.477213] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.477578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.480612] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.484019] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] [ 0.486076] PCI host bridge to bus 0000:00 [ 0.486293] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.486651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.486785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.487181] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window] [ 0.487567] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.487785] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.488095] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 [ 0.489794] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 [ 0.489794] pci 0000:00:02.0: reg 0x10: [mem 0x601c000000-0x601cffffff 64bit] [ 0.489794] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.490182] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.490483] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.490809] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.491167] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.491673] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.492785] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.493927] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 [ 0.494257] pci 0000:00:04.0: reg 0x10: [mem 0x601d140000-0x601d15ffff 64bit] [ 0.495309] pci 0000:00:06.0: [8086:9a09] type 01 class 0x060400 [ 0.495688] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.496454] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400 [ 0.497384] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.497724] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid [ 0.497911] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330 [ 0.498239] pci 0000:00:0d.0: reg 0x10: [mem 0x601d160000-0x601d16ffff 64bit] [ 0.498666] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.499417] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340 [ 0.499745] pci 0000:00:0d.2: reg 0x10: [mem 0x601d100000-0x601d13ffff 64bit] [ 0.500792] pci 0000:00:0d.2: reg 0x18: [mem 0x601d181000-0x601d181fff 64bit] [ 0.501203] pci 0000:00:0d.2: supports D1 D2 [ 0.501427] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.502413] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 [ 0.502746] pci 0000:00:14.0: reg 0x10: [mem 0x5e500000-0x5e50ffff 64bit] [ 0.502873] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.503819] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 [ 0.504152] pci 0000:00:14.2: reg 0x10: [mem 0x601d178000-0x601d17bfff 64bit] [ 0.504535] pci 0000:00:14.2: reg 0x18: [mem 0x601d180000-0x601d180fff 64bit] [ 0.505453] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000 [ 0.505807] pci 0000:00:14.3: reg 0x10: [mem 0x601d174000-0x601d177fff 64bit] [ 0.506330] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.507343] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 [ 0.507723] pci 0000:00:15.0: reg 0x10: [mem 0x4010000000-0x4010000fff 64bit] [ 0.508805] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000 [ 0.508898] pci 0000:00:15.3: reg 0x10: [mem 0x4010001000-0x4010001fff 64bit] [ 0.510065] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 [ 0.510405] pci 0000:00:16.0: reg 0x10: [mem 0x601d17d000-0x601d17dfff 64bit] [ 0.510861] pci 0000:00:16.0: PME# supported from D3hot [ 0.511789] pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601 [ 0.512121] pci 0000:00:17.0: reg 0x10: [mem 0x5e510000-0x5e511fff] [ 0.512453] pci 0000:00:17.0: reg 0x14: [mem 0x5e514000-0x5e5140ff] [ 0.512787] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.513083] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.513380] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.513675] pci 0000:00:17.0: reg 0x24: [mem 0x5e513000-0x5e5137ff] [ 0.514833] pci 0000:00:17.0: PME# supported from D3hot [ 0.515797] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400 [ 0.515884] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.516859] pci 0000:00:1d.1: [8086:a0b1] type 01 class 0x060400 [ 0.517275] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold [ 0.518280] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 [ 0.519318] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100 [ 0.519669] pci 0000:00:1f.3: reg 0x10: [mem 0x601d170000-0x601d173fff 64bit] [ 0.519839] pci 0000:00:1f.3: reg 0x20: [mem 0x601d000000-0x601d0fffff 64bit] [ 0.520313] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.521268] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 [ 0.521605] pci 0000:00:1f.4: reg 0x10: [mem 0x601d17c000-0x601d17c0ff 64bit] [ 0.521814] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.522788] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 [ 0.523803] pci 0000:00:1f.5: reg 0x10: [mem 0x50400000-0x50400fff] [ 0.524813] pci 0000:01:00.0: [144d:a809] type 00 class 0x010802 [ 0.525141] pci 0000:01:00.0: reg 0x10: [mem 0x5e400000-0x5e403fff 64bit] [ 0.525685] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.525787] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.526170] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.526446] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.526762] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.526789] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.527272] pci 0000:2c:00.0: [10ec:8168] type 00 class 0x020000 [ 0.527604] pci 0000:2c:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.527815] pci 0000:2c:00.0: reg 0x18: [mem 0x5e304000-0x5e304fff 64bit] [ 0.528183] pci 0000:2c:00.0: reg 0x20: [mem 0x5e300000-0x5e303fff 64bit] [ 0.528655] pci 0000:2c:00.0: supports D1 D2 [ 0.528785] pci 0000:2c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529797] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.529797] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.529797] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.531816] pci 0000:2d:00.0: [1217:8621] type 00 class 0x080501 [ 0.532152] pci 0000:2d:00.0: reg 0x10: [mem 0x5e201000-0x5e201fff] [ 0.532484] pci 0000:2d:00.0: reg 0x14: [mem 0x5e200000-0x5e2007ff] [ 0.533925] pci 0000:2d:00.0: PME# supported from D3hot D3cold [ 0.537839] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.538105] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.541824] ACPI: EC: interrupt unblocked [ 0.541824] ACPI: EC: event unblocked [ 0.541990] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.542251] ACPI: EC: GPE=0x6e [ 0.542409] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.542773] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events [ 0.543842] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.544238] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.544238] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.544788] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.545084] vgaarb: loaded [ 0.545259] SCSI subsystem initialized [ 0.545793] libata version 3.00 loaded. [ 0.546007] pps_core: LinuxPPS API ver. 1 registered [ 0.546007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.546261] PTP clock support registered [ 0.546813] EDAC MC: Ver: 3.0.0 [ 0.546958] PCI: Using ACPI for IRQ routing [ 0.567450] PCI: pci_cache_line_size set to 64 bytes [ 0.567947] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.568259] e820: reserve RAM buffer [mem 0x39f99000-0x3bffffff] [ 0.568571] e820: reserve RAM buffer [mem 0x434af000-0x43ffffff] [ 0.568785] e820: reserve RAM buffer [mem 0x45c00000-0x47ffffff] [ 0.569097] e820: reserve RAM buffer [mem 0x4afc00000-0x4afffffff] [ 0.569797] clocksource: Switched to clocksource tsc-early [ 0.576870] VFS: Disk quotas dquot_6.6.0 [ 0.577090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.577494] AppArmor: AppArmor Filesystem Enabled [ 0.577766] pnp: PnP ACPI init [ 0.578061] system 00:00: [io 0x0700-0x073f] has been reserved [ 0.578371] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.578684] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579065] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.579462] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.579776] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.580187] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.580936] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.581600] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.581949] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.582293] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.582637] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.583002] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.583364] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.583725] system 00:04: [mem 0xfe0b0000-0xfe0b0fff] has been reserved [ 0.584072] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.584420] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.585326] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.585656] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.586020] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.586366] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.586709] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.587055] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.587399] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.587743] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.588089] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.588433] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.588781] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.589298] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.589611] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590080] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590557] pnp: PnP ACPI: found 8 devices [ 0.596053] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.596547] NET: Registered protocol family 2 [ 0.596933] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.598344] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.598817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.599328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.599800] TCP: Hash tables configured (established 131072 bind 65536) [ 0.600162] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600536] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600953] NET: Registered protocol family 1 [ 0.601192] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.601616] pci 0000:00:02.0: BAR 7: assigned [mem 0x4011000000-0x4017ffffff 64bit] [ 0.602014] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.602272] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.602625] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.602897] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.603215] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.603567] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.603990] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.604248] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.604565] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.604923] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.605184] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.605540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.605861] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.606181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.606536] pci_bus 0000:00: resource 7 [mem 0x50400000-0xbfffffff window] [ 0.606893] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.607265] pci_bus 0000:01: resource 1 [mem 0x5e400000-0x5e4fffff] [ 0.607589] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.607878] pci_bus 0000:02: resource 1 [mem 0x52000000-0x5e1fffff] [ 0.608201] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.608593] pci_bus 0000:2c: resource 0 [io 0x3000-0x3fff] [ 0.608881] pci_bus 0000:2c: resource 1 [mem 0x5e300000-0x5e3fffff] [ 0.609208] pci_bus 0000:2d: resource 1 [mem 0x5e200000-0x5e2fffff] [ 0.609624] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.610406] PCI: CLS 64 bytes, default 64 [ 1.445477] Trying to unpack rootfs image as initramfs... [ 1.464216] Freeing initrd memory: 73260K [ 1.464454] DMAR: No ATSR found [ 1.464652] DMAR: dmar1: Using Queued invalidation [ 1.464907] DMAR: dmar0: Using Queued invalidation [ 1.465155] DMAR: Translation was enabled for dmar0 but we are not in kdump mode [ 1.465537] DMAR: dmar2: Using Queued invalidation [ 1.465925] pci 0000:00:00.0: Adding to iommu group 0 [ 1.466193] pci 0000:00:02.0: Adding to iommu group 1 [ 1.466459] pci 0000:00:04.0: Adding to iommu group 2 [ 1.466727] pci 0000:00:06.0: Adding to iommu group 3 [ 1.467004] pci 0000:00:07.0: Adding to iommu group 4 [ 1.467273] pci 0000:00:0d.0: Adding to iommu group 5 [ 1.467545] pci 0000:00:0d.2: Adding to iommu group 5 [ 1.467816] pci 0000:00:14.0: Adding to iommu group 6 [ 1.468088] pci 0000:00:14.2: Adding to iommu group 6 [ 1.468353] pci 0000:00:14.3: Adding to iommu group 7 [ 1.468622] pci 0000:00:15.0: Adding to iommu group 8 [ 1.468896] pci 0000:00:15.3: Adding to iommu group 8 [ 1.469164] pci 0000:00:16.0: Adding to iommu group 9 [ 1.469430] pci 0000:00:17.0: Adding to iommu group 10 [ 1.469701] pci 0000:00:1d.0: Adding to iommu group 11 [ 1.469975] pci 0000:00:1d.1: Adding to iommu group 12 [ 1.470251] pci 0000:00:1f.0: Adding to iommu group 13 [ 1.470526] pci 0000:00:1f.3: Adding to iommu group 13 [ 1.470798] pci 0000:00:1f.4: Adding to iommu group 13 [ 1.471068] pci 0000:00:1f.5: Adding to iommu group 13 [ 1.471338] pci 0000:01:00.0: Adding to iommu group 14 [ 1.471609] pci 0000:2c:00.0: Adding to iommu group 15 [ 1.471882] pci 0000:2d:00.0: Adding to iommu group 16 [ 1.472172] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.472507] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.472842] software IO TLB: mapped [mem 0x000000003f4af000-0x00000000434af000] (64MB) [ 1.473297] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] [ 1.473937] caller tgl_uncore_imc_freerunning_init_box+0xa2/0xe0 mapping multiple BARs [ 1.474455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 1.474993] clocksource: Switched to clocksource tsc [ 1.476123] Initialise system trusted keyrings [ 1.478759] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 1.480602] Key type asymmetric registered [ 1.480839] Asymmetric key parser 'x509' registered [ 1.481128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.481533] io scheduler mq-deadline registered [ 1.481782] io scheduler kyber registered [ 1.482039] io scheduler bfq registered [ 1.482664] pcieport 0000:00:06.0: PME: Signaling with IRQ 123 [ 1.483221] pcieport 0000:00:07.0: PME: Signaling with IRQ 124 [ 1.483560] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.486550] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125 [ 1.487161] pcieport 0000:00:1d.1: PME: Signaling with IRQ 126 [ 1.487851] Monitor-Mwait will be used to enter C-1 state [ 1.488156] Monitor-Mwait will be used to enter C-2 state [ 1.488718] Monitor-Mwait will be used to enter C-3 state [ 1.489038] ACPI: \_SB_.PR00: Found 3 idle states [ 1.489534] ACPI: \_SB_.PR01: Found 3 idle states [ 1.490000] ACPI: \_SB_.PR02: Found 3 idle states [ 1.490421] ACPI: \_SB_.PR03: Found 3 idle states [ 1.490851] ACPI: \_SB_.PR04: Found 3 idle states [ 1.491282] ACPI: \_SB_.PR05: Found 3 idle states [ 1.491694] ACPI: \_SB_.PR06: Found 3 idle states [ 1.492141] ACPI: \_SB_.PR07: Found 3 idle states [ 1.501417] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.502049] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.502417] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.513099] brd: module loaded [ 1.513306] Loading iSCSI transport class v2.0-870. [ 1.558422] rdac: device handler registered [ 1.679081] nvme nvme0: pci function 0000:01:00.0 [ 1.679365] i2c /dev entries driver [ 1.679582] ahci 0000:00:17.0: version 3.0 [ 1.680066] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.680508] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 1.681022] Cannot find slot node of this ata_port. [ 1.686496] scsi host0: ahci [ 1.686734] ata1 : SATA max UDMA/133 abar m2048@0x5e513000 port 0x5e513100 irq 127 [ 1.687525] NET: Registered protocol family 17 [ 1.687780] Key type dns_resolver registered [ 1.688666] IPI shorthand broadcast: enabled [ 1.688930] sched_clock: Marking stable (1682885186, 6019632)->(1694020852, -5116034) [ 1.689466] registered taskstats version 1 [ 1.689691] Loading compiled-in X.509 certificates [ 1.690024] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 1.693171] redpill: loading out-of-tree module taints kernel. [ 1.693533] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 1.702800] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.708897] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.735154] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.735586] printk: console [ttyS0] enabled [ 1.736039] printk: bootconsole [uart8250] disabled [ 1.739894] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 1.740456] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 1.741096] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 1.741628] page_owner is disabled [ 1.741828] AppArmor: AppArmor sha1 policy hashing enabled [ 1.755505] nvme nvme0: 8/0/0 default/read/poll queues [ 1.762546] nvme0n1: p1 p2 p3 [ 1.999844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.004852] ata1.00: ATA-9: CT240BX500SSD1, M6CR013, max UDMA/133 [ 2.005236] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.005639] ata1.00: SN:1901E16A7E62 [ 2.015964] ata1.00: configured for UDMA/133 [ 2.016240] Invalid parameter [ 2.016510] ata1.00: Find SSD disks. [CT240BX500SSD1] [ 2.018428] scsi 0:0:0:0: Direct-Access ATA CT240BX500SSD1 R013 PQ: 0 ANSI: 5 [ 2.019258] sd 0:0:0:0: got sata disk[0] [ 2.019606] ata1.00: Enabling discard_zeroes_data [ 2.020001] sd 0:0:0:0: [sata1] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.020500] sd 0:0:0:0: [sata1] Write Protect is off [ 2.020833] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 2.021200] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.022015] ata1.00: Enabling discard_zeroes_data [ 2.022605] sata1: p1 p2 [ 2.023255] ata1.00: Enabling discard_zeroes_data [ 2.023686] sd 0:0:0:0: [sata1] Attached SCSI disk [ 2.042257] Freeing unused kernel image (initmem) memory: 1344K [ 2.055028] Write protecting the kernel read-only data: 18432k [ 2.056033] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.056621] Freeing unused kernel image (rodata/data gap) memory: 344K [ 2.057023] rodata_test: all tests were successful [ 2.057323] Run /init as init process [ 2.057549] with arguments: [ 2.057730] /init [ 2.057875] withefi [ 2.058027] DiskIdxMap [ 2.058195] sataboot2 [ 2.058360] SataPortMap [ 2.058533] with environment: [ 2.058727] HOME=/ [ 2.058878] TERM=linux [ 2.059049] pid=0x5583 [ 2.059217] syno_port_thaw=1 [ 2.059413] SasIdxMap=0 [ 2.059585] vid=0x0781 [ 2.059752] HddHotplug=0 [ 2.059930] syno_hdd_detect=0 [ 2.060132] syno_hdd_powerup_seq=0 [ 2.527798] random: crng init done [ 2.565124] ACPI: bus type USB registered [ 2.565370] usbcore: registered new interface driver usbfs [ 2.565671] usbcore: registered new interface driver hub [ 2.565972] usbcore: registered new device driver usb [ 2.577805] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.578099] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 2.579560] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009010 [ 2.580076] xhci_hcd 0000:00:0d.0: cache line size of 64 is not supported [ 2.580704] hub 1-0:1.0: USB hub found [ 2.580920] hub 1-0:1.0: 1 port detected [ 2.581313] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.581616] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 2.582031] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.582437] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.583163] hub 2-0:1.0: USB hub found [ 2.583391] hub 2-0:1.0: 4 ports detected [ 2.583952] usb: port power management may be unreliable [ 2.584520] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.584822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.586342] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009010 [ 2.586853] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.587488] hub 3-0:1.0: USB hub found [ 2.587712] hub 3-0:1.0: 12 ports detected [ 2.588745] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.589053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.589472] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.589911] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.590471] hub 4-0:1.0: USB hub found [ 2.590704] hub 4-0:1.0: 4 ports detected [ 2.847901] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.025067] usb 3-5: not running at top speed [ 3.432972] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.581250] usb 3-5: not running at top speed [ 3.829502] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [ 3.846121] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.848763] r8168 Copyright (C) 2023 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 3.989085] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.137251] usb 3-5: not running at top speed [ 4.545080] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.693239] usb 3-5: not running at top speed [ 5.058902] synobios open /dev/ttyS1 success [ 5.059142] Fail to get disk 1 led type [ 5.059351] Fail to get disk 2 led type [ 5.059558] Fail to get disk 3 led type [ 5.059765] Fail to get disk 4 led type [ 5.059979] Fail to get disk 5 led type [ 5.060187] Fail to get disk 6 led type [ 5.060395] Fail to get disk 7 led type [ 5.060602] Fail to get disk 8 led type [ 5.060810] Fail to get disk 9 led type [ 5.061022] Fail to get disk 10 led type [ 5.061233] Fail to get disk 11 led type [ 5.061445] Fail to get disk 12 led type [ 5.061854] 2023-11-23 1:48:40 UTC [ 5.062044] synobios: load, major number 201 [ 5.062274] Brand: Synology [ 5.062427] Model: SA-6400 [ 5.062577] synobios cpu_arch proc entry initialized [ 5.062847] synobios crypto_hw proc entry initialized [ 5.063118] synobios syno_platform proc entry initialized [ 5.066157] Module [epyc7002_synobios] is removed. [ 5.066434] synobios: unload [ 5.100894] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.250106] usb 3-5: not running at top speed [ 5.658084] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.806273] usb 3-5: not running at top speed [ 5.945946] usb 3-7: new high-speed USB device number 3 using xhci_hcd [ 6.107229] Got empty serial number. Generate serial number from product. [ 6.245939] usb 3-9: new full-speed USB device number 4 using xhci_hcd [ 6.398176] Got empty serial number. Generate serial number from product. [ 6.536938] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 6.686861] Got empty serial number. Generate serial number from product. [ 15.357224] md: md0 stopped. [ 15.358931] md/raid1:md0: active with 1 out of 4 mirrors [ 15.360400] md0: detected capacity change from 0 to 8589869056 [ 15.425438] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 15.448709] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 15.452111] eth0: 0xffffc90000111000, 7c:8a:e1:8e:92:57, IRQ 139 [ 17.375183] Module [r8168] is removed. [ 17.419172] Module [pgdrv] is removed. [ 18.211257] md: md1 stopped. [ 18.212249] md/raid1:md1: active with 1 out of 4 mirrors [ 18.212902] md1: detected capacity change from 0 to 2147418112 [ 18.227952] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 35.371479] md1: detected capacity change from 2147418112 to 0 [ 35.371805] md: md1: set sata1p2 to syno_auto_remap [0] [ 35.372088] md: md1 stopped. [ 35.434723] synobios open /dev/ttyS1 success [ 35.434966] Fail to get disk 1 led type [ 35.435173] Fail to get disk 2 led type [ 35.435380] Fail to get disk 3 led type [ 35.435586] Fail to get disk 4 led type [ 35.435794] Fail to get disk 5 led type [ 35.436006] Fail to get disk 6 led type [ 35.436214] Fail to get disk 7 led type [ 35.436421] Fail to get disk 8 led type [ 35.436627] Fail to get disk 9 led type [ 35.436837] Fail to get disk 10 led type [ 35.437050] Fail to get disk 11 led type [ 35.437262] Fail to get disk 12 led type [ 35.437675] 2023-11-23 1:49:10 UTC [ 35.437867] synobios: load, major number 201 [ 35.438097] Brand: Synology [ 35.438250] Model: SA-6400 [ 35.438399] synobios cpu_arch proc entry initialized [ 35.438664] synobios crypto_hw proc entry initialized [ 35.438939] synobios syno_platform proc entry initialized [ 35.442006] Module [epyc7002_synobios] is removed. [ 35.442282] synobios: unload [ 39.153181] Module [rp] is removed. [ 39.337330] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 39.354142] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.354143] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.354605] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.356221] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.356662] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.357119] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.383751] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 40.114672] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 40.114675] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.115180] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.191005] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 40.193156] systemd[1]: Detected architecture x86-64. [ 40.193483] systemd[1]: Running with unpopulated /etc. [ 40.194056] systemd[1]: Set hostname to <SynologyNAS>. [ 40.194985] systemd[1]: Initializing machine ID from random generator. [ 40.241533] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 40.258052] systemd[1]: Populated /etc with preset unit settings. [ 40.414770] syno-pkg-generator: begin processing builtin package [ 40.415422] syno-pkg-generator: Load info, spk=[ActiveInsight-x86_64-2.2.2-23120.spk] [ 40.452664] syno-pkg-generator: Load info, spk=[BackupRestoreManager-x86_64-2.5.2-12461.spk] [ 40.471492] syno-pkg-generator: Load info, spk=[DhcpServer-x86_64-1.0.2-0046.spk] [ 40.479526] syno-pkg-generator: Load info, spk=[FileStation-x86_64-1.4.1-1559.spk] [ 40.501094] syno-pkg-generator: Load info, spk=[HighAvailability-x86_64-2.1.4-1581.spk] [ 40.522133] syno-pkg-generator: Load info, spk=[HybridShare-epyc7002-1.4.1-1512.spk] [ 40.538099] syno-pkg-generator: Load info, spk=[HyperBackup-ED-x86_64-1.0.0-3716.spk] [ 40.570218] syno-pkg-generator: Load info, spk=[OAuthService-x86_64-1.1.4-0101.spk] [ 40.575268] syno-pkg-generator: Load info, spk=[Python2-x86_64-2.7.18-1004.spk] [ 40.593864] syno-pkg-generator: Load info, spk=[QuickConnect-x86_64-1.0.4-0108.spk] [ 40.608145] syno-pkg-generator: Load info, spk=[SMBService-x86_64-4.15.13-0871.spk] [ 40.648068] syno-pkg-generator: Load info, spk=[ScsiTarget-x86_64-1.0.10-0314.spk] [ 40.665831] syno-pkg-generator: Load info, spk=[SecureSignIn-x86_64-1.1.4-0341.spk] [ 40.675674] syno-pkg-generator: Load info, spk=[StorageManager-epyc7002-1.0.0-0017.spk] [ 40.690815] syno-pkg-generator: Load info, spk=[SupportService-x86_64-1.1.0-21017.spk] [ 40.696094] syno-pkg-generator: Load info, spk=[SynologyUniversalSearch-x86_64-1.7.0-0704.spk] [ 40.721840] syno-pkg-generator: Load info, spk=[USBCopy-x86_64-2.2.1-1306.spk] [ 40.729458] syno-pkg-generator: Generate builtin pkg install units [ 40.735035] syno-pkg-generator: Generate builtin pkg startup units [ 41.017113] syno-pkg-generator: end processing builtin package [ 41.095557] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 41.107490] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 41.108306] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 41.128033] zram: Added device: zram0 [ 41.128350] zram: Added device: zram1 [ 41.128416] zram: Added device: zram2 [ 41.128838] zram: Added device: zram3 [ 41.136085] cryptd: max_cpu_qlen set to 1000 [ 41.142566] systemd-journald[7756]: Received request to flush runtime journal from PID 1 [ 41.144927] AVX2 version of gcm_enc/dec engaged. [ 41.145191] AES CTR mode by8 optimization enabled [ 41.151307] md: md1 stopped. [ 41.153312] md/raid1:md1: active with 1 out of 4 mirrors [ 41.153754] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 41.155072] md1: detected capacity change from 0 to 2147418112 [ 41.160200] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 41.171107] NET: Registered protocol family 10 [ 41.171487] Segment Routing with IPv6 [ 41.173531] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 41.189094] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.213799] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 41.215159] zram0: detected capacity change from 0 to 2461007872 [ 41.225860] Adding 2403324k swap on /dev/zram0. Priority:1 extents:1 across:2403324k SS [ 41.227155] zram1: detected capacity change from 0 to 2461007872 [ 41.238800] Adding 2403324k swap on /dev/zram1. Priority:1 extents:1 across:2403324k SS [ 41.240072] zram2: detected capacity change from 0 to 2461007872 [ 41.249911] Adding 2403324k swap on /dev/zram2. Priority:1 extents:1 across:2403324k SS [ 41.251218] zram3: detected capacity change from 0 to 2461007872 [ 41.260057] loop: module loaded [ 41.262827] Adding 2403324k swap on /dev/zram3. Priority:1 extents:1 across:2403324k SS [ 41.265906] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 41.266245] Copyright(c) 2007 - 2020 Intel Corporation. [ 41.272321] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 41.272691] Copyright(c) 1999 - 2020 Intel Corporation. [ 41.278202] r8168 Gigabit Ethernet driver 8.046.04-NAPI-DASH loaded [ 41.284677] Reinit 1 8001 [ 41.284853] Reinit 2 1 [ 41.295037] Reinit 1 8001 [ 41.295211] Reinit 2 1 [ 41.295873] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 41.298488] r8168 Copyright (C) 2020 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 41.344920] qed_init called [ 41.345086] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 41.345383] creating debugfs root node [ 41.349217] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 41.363671] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 41.364232] creating debugfs root node [ 41.403662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 41.404592] ehci-pci: EHCI PCI platform driver [ 41.405666] uhci_hcd: USB Universal Host Controller Interface driver [ 41.417210] synobios open /dev/ttyS1 success [ 41.417447] Fail to get disk 1 led type [ 41.417654] Fail to get disk 2 led type [ 41.417862] Fail to get disk 3 led type [ 41.418070] Fail to get disk 4 led type [ 41.418276] Fail to get disk 5 led type [ 41.418478] Fail to get disk 6 led type [ 41.418685] Fail to get disk 7 led type [ 41.418887] Fail to get disk 8 led type [ 41.419097] Fail to get disk 9 led type [ 41.419302] Fail to get disk 10 led type [ 41.419510] Fail to get disk 11 led type [ 41.419718] Fail to get disk 12 led type [ 41.420058] 2023-11-23 1:49:16 UTC [ 41.420238] synobios: load, major number 201 [ 41.420475] Brand: Synology [ 41.420626] Model: SA-6400 [ 41.420769] synobios cpu_arch proc entry initialized [ 41.421038] synobios crypto_hw proc entry initialized [ 41.421302] synobios syno_platform proc entry initialized [ 41.442321] usb-storage 3-5:1.0: USB Mass Storage device detected [ 41.442753] scsi host1: usb-storage 3-5:1.0 [ 41.443067] usbcore: registered new interface driver usb-storage [ 41.444674] usbcore: registered new interface driver uas [ 41.790005] eth0: 0xffffc90000141000, 00:11:32:c7:f4:be, IRQ 139 [ 41.796117] Reinit 1 8001 [ 41.796291] Reinit 2 1 [ 41.806483] Reinit 1 8001 [ 41.806667] Reinit 2 1 [ 41.824980] Reinit 1 8001 [ 41.825151] Reinit 2 1 [ 41.974670] 8021q: 802.1Q VLAN Support v1.8 [ 42.415199] Module [adt7475] is removed. [ 42.432000] Module [hwmon_vid] is removed. [ 42.498608] scsi 1:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 42.499267] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 42.499587] sd 1:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 42.501664] sd 1:0:0:0: [synoboot] Write Protect is off [ 42.501963] sd 1:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 42.502626] sd 1:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 42.518964] synoboot: synoboot1 synoboot2 synoboot3 [ 42.520865] sd 1:0:0:0: [synoboot] Attached SCSI removable disk [ 42.545553] ext2: synoboot2 mounted, process=synoencvolume [ 42.547598] ext4: synoboot2 mounted, process=synoencvolume [ 42.553184] vfat: synoboot2 mounted, process=synoencvolume [ 42.589590] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 42.591398] synoboot2 unmounted, process=synoencvolume [ 43.021791] raid6: avx512x4 gen() 57465 MB/s [ 43.038802] raid6: avx512x4 xor() 17066 MB/s [ 43.055798] raid6: avx512x2 gen() 62430 MB/s [ 43.072876] raid6: avx512x2 xor() 37980 MB/s [ 43.089874] raid6: avx512x1 gen() 61643 MB/s [ 43.106873] raid6: avx512x1 xor() 36375 MB/s [ 43.123878] raid6: avx2x4 gen() 50022 MB/s [ 43.140879] raid6: avx2x4 xor() 19525 MB/s [ 43.157878] raid6: avx2x2 gen() 51638 MB/s [ 43.174878] raid6: avx2x2 xor() 29991 MB/s [ 43.191878] raid6: avx2x1 gen() 40183 MB/s [ 43.208875] raid6: avx2x1 xor() 23823 MB/s [ 43.225878] raid6: sse2x4 gen() 13734 MB/s [ 43.242876] raid6: sse2x4 xor() 7185 MB/s [ 43.259876] raid6: sse2x2 gen() 14355 MB/s [ 43.276876] raid6: sse2x2 xor() 9233 MB/s [ 43.293875] raid6: sse2x1 gen() 13423 MB/s [ 43.310874] raid6: sse2x1 xor() 7491 MB/s [ 43.311116] raid6: using algorithm avx512x2 gen() 62430 MB/s [ 43.311418] raid6: .... xor() 37980 MB/s, rmw enabled [ 43.311688] raid6: using avx512x2 recovery algorithm [ 43.312792] xor: automatically using best checksumming function avx [ 43.339209] Btrfs loaded, crc32c=crc32c-intel [ 44.448652] Module [adt7475] is removed. [ 44.456140] Module [hwmon_vid] is removed. [ 44.583151] ata1.00: configured for UDMA/133 [ 44.583422] ata1 : EH complete [ 44.583606] Invalid parameter [ 44.583876] ata1.00: Enabling discard_zeroes_data [ 44.618921] Invalid parameter [ 45.957298] Reinit 1 8001 [ 45.957519] Reinit 2 1 [ 45.964898] r8168: eth0: link up 1 Gbps [ 46.444101] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 46.482957] Module [adt7475] is removed. [ 46.500887] Module [hwmon_vid] is removed. [ 49.436892] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.438594] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.439969] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.471244] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.485295] synoboot2 unmounted, process=synopkicompatsy [ 49.523681] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.525347] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.526278] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.542896] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.589954] synoboot2 unmounted, process=synopkicompatsy [ 49.748581] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(22e1b0466126). [ 49.788425] syno_extent_pool: module license 'Proprietary' taints kernel. [ 49.788778] Disabling lock debugging due to kernel taint [ 49.790539] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 49.829332] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 49.829958] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 49.830590] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 49.904776] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 49.905194] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 49.905578] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 49.906024] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 49.906435] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 49.906824] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 50.207215] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 50.409784] ext2: synoboot1 mounted, process=syno_bios_log_c [ 50.415214] ext4: synoboot1 mounted, process=syno_bios_log_c [ 50.416659] vfat: synoboot1 mounted, process=syno_bios_log_c [ 50.449917] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 50.452577] synoboot1 unmounted, process=syno_bios_log_c [ 52.246771] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 53.782136] fuse: init (API version 7.32) [ 430.287517] md/raid1:md2: active with 1 out of 1 mirrors [ 430.288234] md2: detected capacity change from 0 to 229072961536 [ 430.599405] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 430.687526] BTRFS: device label 2023.11.23-01:55:45 v69057 devid 1 transid 3 /dev/mapper/cachedev_0 scanned by mkfs.btrfs (24756) [ 430.704724] BTRFS info (device dm-2): using free space tree [ 430.705033] BTRFS info (device dm-2): using block group cache tree [ 430.705368] BTRFS info (device dm-2): has skinny extents [ 430.705663] BTRFS info (device dm-2): flagging fs with big metadata feature [ 430.708399] BTRFS info (device dm-2): enabling ssd optimizations [ 430.708752] BTRFS info (device dm-2): root of syno feature tree is null [ 430.709362] BTRFS info (device dm-2): creating free space tree [ 430.709813] BTRFS info (device dm-2): setting compat-ro feature flag for FREE_SPACE_TREE (0x1) [ 430.711711] BTRFS info (device dm-2): cleaning free space cache v1 [ 430.713248] BTRFS info (device dm-2): creating UUID tree [ 430.715263] BTRFS info (device dm-2): setting compat feature flag for BLOCK_GROUP_CACHE_TREE (0x4000000000000000) [ 430.722384] BTRFS info (device dm-2): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 430.818613] SYNO.Storage.CG (24434): drop_caches: 3 [ 430.871067] BTRFS info (device dm-2): enabling auto syno reclaim space [ 430.871486] BTRFS info (device dm-2): enabling ssd optimizations [ 430.871851] BTRFS info (device dm-2): using free space tree [ 430.872184] BTRFS info (device dm-2): using block group cache tree [ 430.872561] BTRFS info (device dm-2): has skinny extents [ 430.877094] BTRFS info (device dm-2): root of syno feature tree is null [ 431.384499] The mempool could be used by other devices [ 431.423343] Synotify use 16384 event queue size [ 431.423630] Synotify use 16384 event queue size [ 431.621356] BTRFS info (device dm-2): using free space tree [ 431.621668] BTRFS info (device dm-2): using block group cache tree [ 578.518466] audit: type=1400 audit(1700704692.940:2): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 578.520004] audit: type=1400 audit(1700704692.940:3): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 578.521511] audit: type=1400 audit(1700704692.940:4): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" [ 585.887906] audit: type=1400 audit(1700704700.310:5): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 585.889291] audit: type=1400 audit(1700704700.310:6): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 585.890667] audit: type=1400 audit(1700704700.310:7): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" This is the result of installing SA6400-69057 on an Intel I5-1136G7 laptop. There is no kernel panic. The /dev/dri directory is not visible yet. I will proceed with more detailed settings related to transcoding.

[ 0.000000] Linux version 5.10.55+ (root@build7) (x86_64-pc-linux-gnu-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.38) #69057 SMP Sat Sep 23 21:43:07 CST 2023 [ 0.000000] Command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000400-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb8f9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb8fa000-0x00000000bb900fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bb901000-0x00000000bc41efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc41f000-0x00000000bc98ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc990000-0x00000000d685ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6860000-0x00000000d68f7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d68f8000-0x00000000d6937fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6938000-0x00000000d69f7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d69f8000-0x00000000daffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '115200n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.837 MHz processor [ 0.002198] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.009672] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.015894] last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.022011] MTRR default type: uncachable [ 0.026443] MTRR fixed ranges enabled: [ 0.030613] 00000-9FFFF write-back [ 0.034625] A0000-BFFFF uncachable [ 0.038611] C0000-CFFFF write-protect [ 0.042866] D0000-DFFFF uncachable [ 0.046836] E0000-FFFFF write-protect [ 0.051065] MTRR variable ranges enabled: [ 0.055514] 0 base 0000000000 mask 7C00000000 write-back [ 0.061605] 1 base 0400000000 mask 7FE0000000 write-back [ 0.067680] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.073808] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.079866] 4 base 00DB800000 mask 7FFF800000 uncachable [ 0.085984] 5 base 041F800000 mask 7FFF800000 uncachable [ 0.092034] 6 base 041F600000 mask 7FFFE00000 uncachable [ 0.098143] 7 disabled [ 0.100950] 8 disabled [ 0.103776] 9 disabled [ 0.107149] x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel. [ 0.119751] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.127240] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.134902] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.163474] found SMP MP-table at [mem 0x000fd710-0x000fd71f] [ 0.169898] Using GB pages for direct mapping [ 0.228893] printk: log_buf_len: 33554432 bytes [ 0.233946] printk: early log buf free: 1044080(99%) [ 0.239423] RAMDISK: [mem 0x418c75000-0x41d3fffff] [ 0.245507] ACPI: Early table checksum verification disabled [ 0.251795] ACPI: RSDP 0x00000000D69C8000 000024 (v02 ALASKA) [ 0.258214] ACPI: XSDT 0x00000000D69C8078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.267700] ACPI: FACP 0x00000000D69D4B98 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.277173] ACPI: DSDT 0x00000000D69C8188 00CA0E (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.286694] ACPI: FACS 0x00000000D69F6080 000040 [ 0.291842] ACPI: APIC 0x00000000D69D4CA8 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.301401] ACPI: FPDT 0x00000000D69D4D20 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.310874] ACPI: SSDT 0x00000000D69D4D68 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.320355] ACPI: SSDT 0x00000000D69D52A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.329846] ACPI: MCFG 0x00000000D69D5D80 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.339405] ACPI: HPET 0x00000000D69D5DC0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.348930] ACPI: SSDT 0x00000000D69D5DF8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.358429] ACPI: SSDT 0x00000000D69D6168 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.367910] ACPI: DMAR 0x00000000D69D9650 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.377418] ACPI: Reserving FACP table memory at [mem 0xd69d4b98-0xd69d4ca3] [ 0.385243] ACPI: Reserving DSDT table memory at [mem 0xd69c8188-0xd69d4b95] [ 0.393103] ACPI: Reserving FACS table memory at [mem 0xd69f6080-0xd69f60bf] [ 0.400938] ACPI: Reserving APIC table memory at [mem 0xd69d4ca8-0xd69d4d19] [ 0.408729] ACPI: Reserving FPDT table memory at [mem 0xd69d4d20-0xd69d4d63] [ 0.416539] ACPI: Reserving SSDT table memory at [mem 0xd69d4d68-0xd69d52a0] [ 0.424399] ACPI: Reserving SSDT table memory at [mem 0xd69d52a8-0xd69d5d7f] [ 0.432217] ACPI: Reserving MCFG table memory at [mem 0xd69d5d80-0xd69d5dbb] [ 0.440087] ACPI: Reserving HPET table memory at [mem 0xd69d5dc0-0xd69d5df7] [ 0.447982] ACPI: Reserving SSDT table memory at [mem 0xd69d5df8-0xd69d6164] [ 0.455799] ACPI: Reserving SSDT table memory at [mem 0xd69d6168-0xd69d9648] [ 0.463626] ACPI: Reserving DMAR table memory at [mem 0xd69d9650-0xd69d9707] [ 0.471460] ACPI: Local APIC address 0xfee00000 [ 0.476519] No NUMA configuration found [ 0.480804] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.488266] NODE_DATA(0) allocated [mem 0x41d5f7000-0x41d5fafff] [ 0.495046] Zone ranges: [ 0.497850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.504716] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.511622] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.518496] Movable zone start for each node [ 0.523244] Early memory node ranges [ 0.527267] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.534243] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.541211] node 0: [mem 0x0000000000100000-0x00000000bb8f9fff] [ 0.548137] node 0: [mem 0x00000000bb901000-0x00000000bc41efff] [ 0.555121] node 0: [mem 0x00000000bc990000-0x00000000d685ffff] [ 0.562073] node 0: [mem 0x00000000d68f8000-0x00000000d6937fff] [ 0.569058] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.576051] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.583059] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.590900] On node 0 totalpages: 4151494 [ 0.595345] DMA zone: 64 pages used for memmap [ 0.600441] DMA zone: 23 pages reserved [ 0.604896] DMA zone: 3997 pages, LIFO batch:0 [ 0.610044] DMA32 zone: 13645 pages used for memmap [ 0.615676] DMA32 zone: 873257 pages, LIFO batch:63 [ 0.621302] Normal zone: 51160 pages used for memmap [ 0.627022] Normal zone: 3274240 pages, LIFO batch:63 [ 0.632858] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.632861] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.639430] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.657610] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.665890] On node 0, zone DMA32: 1393 pages in unavailable ranges [ 0.672596] On node 0, zone DMA32: 152 pages in unavailable ranges [ 0.679970] On node 0, zone DMA32: 18119 pages in unavailable ranges [ 0.737050] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.744155] On node 0, zone Normal: 2560 pages in unavailable ranges [ 0.751339] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.766214] ACPI: PM-Timer IO Port: 0x1808 [ 0.770764] ACPI: Local APIC address 0xfee00000 [ 0.775827] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.782423] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.790057] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.797119] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.804512] ACPI: IRQ0 used by override. [ 0.808896] ACPI: IRQ9 used by override. [ 0.813275] Using ACPI (MADT) for SMP configuration information [ 0.819835] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.825561] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.837315] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.842916] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.851374] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.859790] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.868194] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.876603] PM: hibernation: Registered nosave memory: [mem 0xbb8fa000-0xbb900fff] [ 0.885010] PM: hibernation: Registered nosave memory: [mem 0xbc41f000-0xbc98ffff] [ 0.893426] PM: hibernation: Registered nosave memory: [mem 0xd6860000-0xd68f7fff] [ 0.901859] PM: hibernation: Registered nosave memory: [mem 0xd6938000-0xd69f7fff] [ 0.910273] PM: hibernation: Registered nosave memory: [mem 0xd69f8000-0xdaffefff] [ 0.918682] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.927104] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.935562] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.943969] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.952376] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.960800] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.969215] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.977588] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.986029] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.994470] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 1.002886] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 1.011294] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 1.019701] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 1.028134] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 1.036568] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 1.043391] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.065763] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:4 nr_node_ids:1 [ 1.074641] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u524288 [ 1.081929] pcpu-alloc: s176664 r8192 d32232 u524288 alloc=1*2097152 [ 1.089000] pcpu-alloc: [0] 0 1 2 3 [ 1.093030] Built 1 zonelists, mobility grouping on. Total pages: 4086602 [ 1.100665] Policy zone: Normal [ 1.104135] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 1.152307] Synology Hardware Version: SA6400 [ 1.157175] Internal netif num: 2 [ 1.160984] Mac2: 94DE806D73B4 [ 1.164350] Mac1: 001132C7F4BE [ 1.167747] Serial Number: 1980PDN028952 [ 1.172135] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 1.187083] Vender format version: 2 [ 1.193870] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 1.301563] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.405802] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.594263] Memory: 15992372K/16605976K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 613348K reserved, 0K cma-reserved) [ 1.779687] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.865498] ftrace: allocating 32589 entries in 128 pages [ 1.970304] ftrace: allocated 128 pages with 1 groups [ 2.036833] rcu: Hierarchical RCU implementation. [ 2.098663] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. [ 2.185608] Rude variant of Tasks RCU enabled. [ 2.245096] Tracing variant of Tasks RCU enabled. [ 2.308019] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.408693] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.507776] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.585255] Console: colour dummy device 80x25 [ 2.643660] ACPI: Core revision 20200925 [ 2.695361] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 2.815588] APIC: Switch to symmetric I/O mode setup [ 2.880875] DMAR: Host address width 39 [ 2.931211] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 3.001005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 3.105102] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 3.174893] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 3.278994] DMAR: RMRR base: 0x000000dae83000 end: 0x000000dae91fff [ 3.361365] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 3.443736] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 3.527247] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 3.598177] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 3.712317] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 3.783293] x2apic enabled [ 3.818764] Switched APIC routing to cluster x2apic. [ 3.884855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 3.968584] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325531ed3c7, max_idle_ns: 440795306136 ns [ 4.107057] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.67 BogoMIPS (lpj=3491837) [ 4.108059] pid_max: default: 32768 minimum: 301 [ 4.109098] LSM: Security Framework initializing [ 4.110098] AppArmor: AppArmor initialized [ 4.111133] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.112124] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.113636] mce: CPU0: Thermal monitoring enabled (TM1) [ 4.114094] process: using mwait in idle threads [ 4.115063] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 4.116058] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 4.117062] Speculative Store Bypass: Vulnerable [ 4.118059] SRBDS: Vulnerable: No microcode [ 4.120357] Freeing SMP alternatives memory: 32K [ 4.224117] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 4.225312] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 4.226060] ... version: 3 [ 4.227058] ... bit width: 48 [ 4.228058] ... generic registers: 8 [ 4.229059] ... value mask: 0000ffffffffffff [ 4.230058] ... max period: 00007fffffffffff [ 4.231057] ... fixed-purpose events: 3 [ 4.232058] ... event mask: 00000007000000ff [ 4.233341] rcu: Hierarchical SRCU implementation. [ 4.235692] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 4.236173] smp: Bringing up secondary CPUs ... [ 4.237235] x86: Booting SMP configuration: [ 4.238061] .... node #0, CPUs: #1 #2 #3 [ 4.242684] smp: Brought up 1 node, 4 CPUs [ 4.244059] smpboot: Max logical packages: 1 [ 4.245062] smpboot: Total of 4 processors activated (27934.69 BogoMIPS) [ 4.248271] devtmpfs: initialized [ 4.250246] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 4.250269] PM: Registering ACPI NVS region [mem 0xbb8fa000-0xbb900fff] (28672 bytes) [ 4.252062] PM: Registering ACPI NVS region [mem 0xd6938000-0xd69f7fff] (786432 bytes) [ 4.253181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 4.254066] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 4.255161] pinctrl core: initialized pinctrl subsystem [ 4.257296] NET: Registered protocol family 16 [ 4.258278] audit: initializing netlink subsys (disabled) [ 4.259077] audit: type=2000 audit(1700666646.171:1): state=initialized audit_enabled=0 res=1 [ 4.260146] thermal_sys: Registered thermal governor 'step_wise' [ 4.261124] cpuidle: using governor ladder [ 4.393078] cpuidle: using governor menu [ 4.445164] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.544064] ACPI: bus type PCI registered [ 4.597059] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.682214] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 4.804063] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 4.894073] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 5.031190] PCI: Using configuration type 1 for base access [ 5.104203] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 5.200826] Kprobes globally optimized [ 5.251114] ACPI: Added _OSI(Module Device) [ 5.306084] ACPI: Added _OSI(Processor Device) [ 5.364059] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.426062] ACPI: Added _OSI(Processor Aggregator Device) [ 5.497059] ACPI: Added _OSI(Linux-Dell-Video) [ 5.555061] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 5.625059] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 5.715110] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 5.801591] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 5.883058] ACPI: Dynamic OEM Table Load: [ 5.936068] ACPI: SSDT 0xFFFF888100AEF400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 6.050062] ACPI: Dynamic OEM Table Load: [ 6.102067] ACPI: SSDT 0xFFFF888100AA4000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 6.216119] ACPI: Dynamic OEM Table Load: [ 6.269064] ACPI: SSDT 0xFFFF88810106A600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 6.384635] ACPI: Interpreter enabled [ 6.433096] ACPI: (supports S0 S4 S5) [ 6.481059] ACPI: Using IOAPIC for interrupt routing [ 6.547058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.667100] ACPI: Enabled 7 GPEs in block 00 to 3F [ 6.752102] ACPI: Power Resource [FN00] (off) [ 6.810258] ACPI: Power Resource [FN01] (off) [ 6.867257] ACPI: Power Resource [FN02] (off) [ 6.925081] ACPI: Power Resource [FN03] (off) [ 6.982249] ACPI: Power Resource [FN04] (off) [ 7.041060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 7.122075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 7.242062] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 7.337395] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 7.429063] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 7.537104] PCI host bridge to bus 0000:00 [ 7.591068] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 7.680060] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 7.769062] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 7.868059] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 7.966062] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 8.065059] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 8.163061] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 8.261060] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 8.360062] pci_bus 0000:00: root bus resource [bus 00-3e] [ 8.432086] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 8.511296] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 8.590081] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 8.679076] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 8.774068] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 8.848313] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 8.927076] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit] [ 9.016345] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 9.095086] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 9.185167] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 9.261183] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 9.340089] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f00f 64bit] [ 9.430161] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 9.510241] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 9.589080] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 9.672058] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff] [ 9.754070] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 9.827155] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 9.907141] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 9.986084] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff] [ 10.069186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 10.149268] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 10.228082] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 10.318062] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 10.398264] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 10.477188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 10.557098] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 10.619129] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 10.707469] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 10.786199] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 10.867099] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 10.929124] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 11.017350] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 11.096189] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 11.176097] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 11.238071] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 11.327081] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 11.406085] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff] [ 11.488192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 11.569290] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 11.648323] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 11.727083] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 11.800073] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 11.873073] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 11.947069] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 12.020071] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 12.093070] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff] [ 12.176124] pci 0000:00:1f.2: PME# supported from D3hot [ 12.244259] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 12.323089] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit] [ 12.413090] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 12.486401] acpiphp: Slot [1] registered [ 12.538069] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 12.603202] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000 [ 12.682102] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit] [ 12.772075] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f] [ 12.845232] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.932280] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 12.998067] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 13.078063] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 13.167216] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000 [ 13.246103] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit] [ 13.336064] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 13.416177] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 13.481069] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 13.572479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 13.675184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 13.781102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.884162] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 13.987158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15), disabled. [ 14.090161] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 14.195157] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled. [ 14.298160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 14.402772] iommu: Default domain type: Passthrough (set via kernel command line) [ 14.501114] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 14.502055] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 14.692071] pci 0000:00:02.0: vgaarb: bridge control possible [ 14.768059] vgaarb: loaded [ 14.803189] SCSI subsystem initialized [ 14.852104] libata version 3.00 loaded. [ 14.903125] pps_core: LinuxPPS API ver. 1 registered [ 14.968058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 15.088069] PTP clock support registered [ 15.140102] EDAC MC: Ver: 3.0.0 [ 15.181459] PCI: Using ACPI for IRQ routing [ 15.239197] PCI: pci_cache_line_size set to 64 bytes [ 15.304135] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 15.383060] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 15.462062] e820: reserve RAM buffer [mem 0xbb8fa000-0xbbffffff] [ 15.541062] e820: reserve RAM buffer [mem 0xbc41f000-0xbfffffff] [ 15.620065] e820: reserve RAM buffer [mem 0xd6860000-0xd7ffffff] [ 15.699060] e820: reserve RAM buffer [mem 0xd6938000-0xd7ffffff] [ 15.778062] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 15.857062] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 15.938161] clocksource: Switched to clocksource tsc-early [ 16.042098] VFS: Disk quotas dquot_6.6.0 [ 16.093681] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.184332] AppArmor: AppArmor Filesystem Enabled [ 16.246207] pnp: PnP ACPI init [ 16.286483] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 16.373443] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 16.463086] system 00:01: [io 0x0680-0x069f] has been reserved [ 16.540868] system 00:01: [io 0xffff] has been reserved [ 16.610648] system 00:01: [io 0xffff] has been reserved [ 16.680436] system 00:01: [io 0xffff] has been reserved [ 16.750219] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 16.828019] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 16.905807] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 16.983602] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 17.061394] system 00:01: [io 0x1800-0x18fe] has been reserved [ 17.139189] system 00:01: [io 0x164e-0x164f] has been reserved [ 17.216994] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.306280] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 17.392243] system 00:03: [io 0x1854-0x1857] has been reserved [ 17.470037] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 17.568737] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 17.646519] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 17.724304] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 17.802112] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 17.891871] pnp 00:05: [dma 0 disabled] [ 17.942309] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 18.028224] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 18.106013] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 18.196171] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 18.283116] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 18.370055] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 18.457004] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 18.543947] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 18.630896] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 18.717840] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 18.809365] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 18.896308] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 18.983257] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 19.074777] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 19.161725] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 19.248681] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 19.338449] pnp: PnP ACPI: found 8 devices [ 19.400792] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 19.517582] NET: Registered protocol family 2 [ 19.575279] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 19.681700] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 19.795052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 19.901843] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 19.999415] TCP: Hash tables configured (established 131072 bind 65536) [ 20.086469] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.175826] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 20.270944] NET: Registered protocol family 1 [ 20.328246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 20.393544] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 20.458743] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 20.538822] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 20.628069] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 20.693265] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 20.782509] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 20.863721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 20.944950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 21.035324] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 21.125710] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 21.216081] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 21.306462] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 21.397980] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 21.489506] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 21.562720] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 21.645093] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 21.727665] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 21.837507] pci 0000:00:02.0: pci_fixup_video+0x0/0xb0 took 107262 usecs [ 21.926759] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag [ 22.000081] pci 0000:02:00.0: quirk_msi_intx_disable_qca_bug+0x0/0x10 took 71596 usecs [ 22.104272] PCI: CLS 64 bytes, default 64 [ 26.858187] Trying to unpack rootfs image as initramfs... [ 27.012029] Freeing initrd memory: 73260K [ 27.064716] DMAR: No ATSR found [ 27.106021] DMAR: dmar0: Using Queued invalidation [ 27.168998] DMAR: dmar1: Using Queued invalidation [ 27.513566] pci 0000:00:00.0: Adding to iommu group 0 [ 27.580018] pci 0000:00:02.0: Adding to iommu group 1 [ 27.646469] pci 0000:00:03.0: Adding to iommu group 2 [ 27.712817] pci 0000:00:14.0: Adding to iommu group 3 [ 27.779178] pci 0000:00:16.0: Adding to iommu group 4 [ 27.845628] pci 0000:00:19.0: Adding to iommu group 5 [ 27.911981] pci 0000:00:1a.0: Adding to iommu group 6 [ 27.978335] pci 0000:00:1b.0: Adding to iommu group 7 [ 28.044690] pci 0000:00:1c.0: Adding to iommu group 8 [ 28.111044] pci 0000:00:1c.3: Adding to iommu group 9 [ 28.177397] pci 0000:00:1c.4: Adding to iommu group 10 [ 28.244895] pci 0000:00:1d.0: Adding to iommu group 11 [ 28.312411] pci 0000:00:1f.0: Adding to iommu group 12 [ 28.379994] pci 0000:00:1f.2: Adding to iommu group 12 [ 28.447489] pci 0000:00:1f.3: Adding to iommu group 12 [ 28.514990] pci 0000:02:00.0: Adding to iommu group 13 [ 28.582484] pci 0000:03:00.0: Adding to iommu group 14 [ 28.650065] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 28.734724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 28.819387] software IO TLB: mapped [mem 0x00000000d2860000-0x00000000d6860000] (64MB) [ 28.923631] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 29.027812] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 29.103308] RAPL PMU: hw unit of domain package 2^-14 Joules [ 29.177671] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 29.248598] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 29.325974] Initialise system trusted keyrings [ 29.415843] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 29.505227] Key type asymmetric registered [ 29.559047] Asymmetric key parser 'x509' registered [ 29.623135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 29.720354] io scheduler mq-deadline registered [ 29.779842] io scheduler kyber registered [ 29.832535] io scheduler bfq registered [ 29.885172] Monitor-Mwait will be used to enter C-1 state [ 29.956282] Monitor-Mwait will be used to enter C-2 state [ 30.027307] ACPI: \_PR_.CPU0: Found 2 idle states [ 30.089768] ACPI: \_PR_.CPU1: Found 2 idle states [ 30.152042] ACPI: \_PR_.CPU2: Found 2 idle states [ 30.214337] ACPI: \_PR_.CPU3: Found 2 idle states [ 30.359094] tsc: Refined TSC clocksource calibration: 3491.912 MHz [ 30.440381] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255787006b, max_idle_ns: 440795244845 ns [ 31.041789] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 31.125433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 31.227277] printk: console [ttyS0] enabled [ 31.236245] printk: bootconsole [uart8250] disabled [ 31.423005] clocksource: Switched to clocksource tsc [ 31.430954] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 31.437773] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 31.462712] brd: module loaded [ 31.465961] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204) [ 31.481682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.491960] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.507546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.517828] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.533445] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.548998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.559349] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204) [ 31.574954] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204) [ 31.590477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 31.600765] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 31.607168] Loading iSCSI transport class v2.0-870. [ 31.627149] rdac: device handler registered [ 31.646050] i2c /dev entries driver [ 31.649684] ahci 0000:00:1f.2: version 3.0 [ 31.654283] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 31.662486] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 31.669875] Cannot find slot node of this ata_port. [ 31.674838] Cannot find slot node of this ata_port. [ 31.694511] scsi host0: ahci [ 31.717114] scsi host1: ahci [ 31.726863] scsi host2: ahci [ 31.730660] scsi host3: ahci [ 31.734317] scsi host4: ahci [ 31.741653] scsi host5: ahci [ 31.744779] ata1 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 29 [ 31.752375] ata2 : SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 29 [ 31.759910] ata3 : DUMMY [ 31.762480] ata4 : DUMMY [ 31.765038] ata5 : DUMMY [ 31.767604] ata6 : DUMMY [ 31.770268] ata3 : port disabled [ 31.770376] ata4 : port disabled [ 31.771803] NET: Registered protocol family 17 [ 31.771823] Key type dns_resolver registered [ 31.772068] ata5 : port disabled [ 31.772073] Invalid parameter [ 31.772159] ata6 : port disabled [ 31.772164] Invalid parameter [ 31.773571] Invalid parameter [ 31.801193] Invalid parameter [ 31.804824] IPI shorthand broadcast: enabled [ 31.809183] sched_clock: Marking stable (30306208278, 1502954689)->(34868485575, -3059322608) [ 31.817937] registered taskstats version 1 [ 31.822111] Loading compiled-in X.509 certificates [ 31.827038] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 31.840081] redpill: loading out-of-tree module taints kernel. [ 31.846100] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 32.076409] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.083020] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 32.090929] ata2.00: ATA-9: ADATA SP600, 2.3, max UDMA/100 [ 32.096510] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.103390] ata2.00: SN:03912202500600000028 [ 32.107753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 32.114533] ata1.00: ATA-9: ADATA SP600, 2.9, max UDMA/100 [ 32.120137] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 32.120877] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 32.127003] ata1.00: SN:2E3520001576 [ 32.127072] ata2.00: configured for UDMA/100 [ 32.137262] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 32.140843] Invalid parameter [ 32.145173] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 32.157227] ata1.00: configured for UDMA/100 [ 32.159840] page_owner is disabled [ 32.169751] Invalid parameter [ 32.174100] AppArmor: AppArmor sha1 policy hashing enabled [ 32.177543] ata1.00: Find SSD disks. [ADATA SP600] [ 32.191217] scsi 0:0:0:0: Direct-Access ADATA SP600 2.9 PQ: 0 ANSI: 5 [ 32.200363] sd 0:0:0:0: got sata disk[0] [ 32.200467] ata2.00: Find SSD disks. [ADATA SP600] [ 32.204552] sd 0:0:0:0: [sata1] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.209405] scsi 1:0:0:0: Direct-Access ADATA SP600 2.3 PQ: 0 ANSI: 5 [ 32.217073] sd 0:0:0:0: [sata1] Write Protect is off [ 32.226213] sd 1:0:0:0: got sata disk[1] [ 32.231008] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 32.231114] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.235247] sd 1:0:0:0: [sata2] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 32.256981] sd 1:0:0:0: [sata2] Write Protect is off [ 32.257833] sata1: p1 p2 p3 < p5 > [ 32.262005] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 10 [ 32.266385] sd 0:0:0:0: [sata1] Attached SCSI disk [ 32.270920] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.291920] sata2: p1 p2 [ 32.295871] sd 1:0:0:0: [sata2] Attached SCSI disk [ 32.305701] Freeing unused kernel image (initmem) memory: 1344K [ 32.318469] Write protecting the kernel read-only data: 18432k [ 32.325473] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 32.332400] Freeing unused kernel image (rodata/data gap) memory: 344K [ 32.339001] rodata_test: all tests were successful [ 32.343855] Run /init as init process [ 32.347551] with arguments: [ 32.350540] /init [ 32.352838] withefi [ 32.355315] DiskIdxMap [ 32.358030] sataboot2 [ 32.360673] SataPortMap [ 32.363498] with environment: [ 32.366678] HOME=/ [ 32.369062] TERM=linux [ 32.371808] pid=0x5583 [ 32.374554] syno_port_thaw=1 [ 32.377814] SasIdxMap=0 [ 32.380649] vid=0x0781 [ 32.383387] HddHotplug=0 [ 32.386326] syno_hdd_detect=0 [ 32.389695] syno_hdd_powerup_seq=0 [ 32.894082] random: crng init done [ 33.066908] ACPI: bus type USB registered [ 33.071043] usbcore: registered new interface driver usbfs [ 33.076657] usbcore: registered new interface driver hub [ 33.082064] usbcore: registered new device driver usb [ 33.141176] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.146503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 33.155122] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009010 [ 33.164361] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 33.171902] hub 1-0:1.0: USB hub found [ 33.175745] hub 1-0:1.0: 14 ports detected [ 33.184702] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 33.190049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 33.197538] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 33.203942] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 33.212593] hub 2-0:1.0: USB hub found [ 33.216442] hub 2-0:1.0: 6 ports detected [ 33.457092] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 33.615666] Got empty serial number. Generate serial number from product. [ 33.748139] usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 38.270083] DMABUF-COMPAT BACKPORTED INIT [ 38.275337] DMAHEAP BACKPORTED INIT [ 38.280228] Loading dma-buf modules backported from I915-23.8.20 [ 38.287669] DMA BUF backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.300135] [drm] DRM BACKPORTED INIT [ 38.307277] [drm] DRM_KMS_HELPER BACKPORTED INIT [ 38.313629] I915 COMPAT BACKPORTED INIT [ 38.318976] Loading I915 modules backported from I915-23.8.20 [ 38.326187] I915 Backport generated by backports.git RHEL_88_23.8.20_PSB_230810.24 [ 38.356418] [drm] I915 BACKPORTED INIT [ 38.362040] i915 0000:00:02.0: [drm] GT count: 1, enabled: 1 [ 38.368656] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 38.376268] type mismatch for e0000000,10000000 old: write-back new: write-combining [ 38.384996] Failed to add WC MTRR for [00000000bec5d527-00000000ac95f8d5]; performance may suffer. [ 38.385042] i915 0000:00:02.0: [drm] Transparent Hugepage support is recommended for optimal performance when IOMMU is enabled! [ 38.407012] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 38.417437] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 38.442136] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 38.450485] #PF: supervisor instruction fetch in kernel mode [ 38.456171] #PF: error_code(0x0010) - not-present page [ 38.462750] PGD 0 P4D 0 [ 38.465317] Oops: 0010 [#1] SMP NOPTI [ 38.469035] CPU: 1 PID: 4450 Comm: modprobe Tainted: G OE 5.10.55+ #69057 [ 38.477136] Hardware name: Gigabyte Technology Co., Ltd. Z87N-WIFI/Z87N-WIFI, BIOS F6 08/12/2014 [ 38.486024] RIP: 0010:0x0 [ 38.488683] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.495622] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.500909] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.508101] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.515302] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.522512] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.529716] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.536926] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.545064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.550888] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.558099] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.565302] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 38.572503] Call Trace: [ 38.575203] [<ffffffffa0281df5>] vma_get_pages+0x95/0x130 [i915] [ 38.582755] [<ffffffffa0284360>] ? i915_vma_pin_ww+0x370/0x9e0 [i915] [ 38.590526] [<ffffffff81226992>] ? __kmalloc+0x142/0x2e0 [ 38.596166] [<ffffffffa0284b24>] ? i915_ggtt_pin_for_gt+0x154/0x200 [i915] [ 38.604560] [<ffffffffa0218a5b>] ? intel_gt_init+0xab/0x930 [i915] [ 38.612298] [<ffffffffa01dde6e>] ? fwtable_read32+0x8e/0x210 [i915] [ 38.620072] [<ffffffffa01dd819>] ? gen6_write32+0x59/0x1e0 [i915] [ 38.627761] [<ffffffffa02772f8>] ? i915_gem_init+0x208/0x280 [i915] [ 38.635535] [<ffffffffa01b3a24>] ? i915_driver_probe+0x14f4/0x1d70 [i915] [ 38.643740] [<ffffffff8145360f>] ? create_pinctrl+0x2f/0x430 [ 38.649691] [<ffffffffa01c179b>] ? i915_pci_probe+0x9b/0x3d0 [i915] [ 38.657358] [<ffffffff8147062e>] ? local_pci_probe+0x3e/0x70 [ 38.663149] [<ffffffff814716f1>] ? pci_device_probe+0xd1/0x180 [ 38.669126] [<ffffffff81533c4d>] ? really_probe+0xed/0x420 [ 38.674783] [<ffffffff8153424e>] ? driver_probe_device+0x4e/0xa0 [ 38.680919] [<ffffffff81534521>] ? device_driver_attach+0xa1/0xb0 [ 38.687183] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.693431] [<ffffffff815345a2>] ? __driver_attach+0x72/0x100 [ 38.699308] [<ffffffff81534530>] ? device_driver_attach+0xb0/0xb0 [ 38.705548] [<ffffffff81531aa1>] ? bus_for_each_dev+0x61/0x90 [ 38.711458] [<ffffffff81532faf>] ? bus_add_driver+0x10f/0x1c0 [ 38.717352] [<ffffffff81534e59>] ? driver_register+0x89/0xd0 [ 38.723329] [<ffffffffa047c033>] ? __init_backport+0x33/0x8c [i915] [ 38.730959] [<ffffffffa047c000>] ? 0xffffffffa047c000 [ 38.736151] [<ffffffff81000bfd>] ? do_one_initcall+0x3d/0x1c0 [ 38.742043] [<ffffffff810ff5d2>] ? do_init_module+0x22/0x250 [ 38.747869] [<ffffffff81227b5e>] ? kmem_cache_alloc_trace+0x12e/0x2a0 [ 38.754453] [<ffffffff810ff60a>] ? do_init_module+0x5a/0x250 [ 38.760268] [<ffffffff811023f8>] ? __do_sys_finit_module+0x88/0xb0 [ 38.766627] [<ffffffff81787853>] ? do_syscall_64+0x33/0x40 [ 38.772267] [<ffffffff8180007c>] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 38.779379] Modules linked in: i915(OE+) i2c_algo_bit i915_compat(OE) drm_mipi_dsi(OE) intel_gtt(OE) drm_kms_helper(OE) drm(OE) drm_panel_orientation_quirks(OE) hdmi(OE) dmabuf(OE) xhci_pci xhci_hcd usbcore usb_common [ 38.800237] CR2: 0000000000000000 [ 38.803619] ---[ end trace 5e832f8482f0d9cf ]--- [ 38.808637] RIP: 0010:0x0 [ 38.811294] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 38.818217] RSP: 0018:ffffc9000064f9f8 EFLAGS: 00010246 [ 38.823485] RAX: 0000000000000000 RBX: ffff88810f7d0000 RCX: 0000000000001000 [ 38.830668] RDX: ffff888101153c00 RSI: 0000000000000527 RDI: ffff88810f7d0000 [ 38.837872] RBP: 0000000000000000 R08: 000000ffffffffff R09: 0000000000000000 [ 38.845082] R10: 0000000101aebfff R11: 0000000000000000 R12: ffff88810f7d01c0 [ 38.852283] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000400 [ 38.859505] FS: 00007f4b7c453740(0000) GS:ffff888401a80000(0000) knlGS:0000000000000000 [ 38.867711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.873526] CR2: ffffffffffffffd6 CR3: 000000010f4be002 CR4: 00000000001706e0 [ 38.880729] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 38.887957] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.002725] e1000e: Intel(R) PRO/1000 Network Driver [ 40.007740] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 40.014090] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 40.104357] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 40.196228] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:6d:73:b4 [ 40.204249] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 40.211206] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 42.441356] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) [ 43.488442] alx 0000:02:00.0 eth1: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:32:c7:f4:be] [ 43.921881] synobios open /dev/ttyS1 success [ 43.926217] Fail to get disk 1 led type [ 43.930084] Fail to get disk 2 led type [ 43.933982] Fail to get disk 3 led type [ 43.937856] Fail to get disk 4 led type [ 43.941730] Fail to get disk 5 led type [ 43.945614] Fail to get disk 6 led type [ 43.949506] Fail to get disk 7 led type [ 43.953404] Fail to get disk 8 led type [ 43.957295] Fail to get disk 9 led type [ 43.961176] Fail to get disk 10 led type [ 43.965148] Fail to get disk 11 led type [ 43.969126] Fail to get disk 12 led type [ 43.973140] 2023-11-22 15:24:50 UTC [ 43.976667] synobios: load, major number 201 [ 43.981004] Brand: Synology [ 43.983844] Model: SA-6400 [ 43.986584] synobios cpu_arch proc entry initialized [ 43.991599] synobios crypto_hw proc entry initialized [ 43.996696] synobios syno_platform proc entry initialized [ 44.013547] Module [epyc7002_synobios] is removed. [ 44.018527] synobios: unload [ 44.765760] md: md0 stopped. [ 44.770835] md: kicking non-fresh sata2p1 from array! [ 44.783741] md/raid1:md0: active with 1 out of 4 mirrors [ 44.791758] md0: detected capacity change from 0 to 8589869056 [ 45.463459] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 45.550406] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 45.787931] Module [r8168] is removed. [ 46.005574] loop: module loaded [ 49.300658] Module [rp] is removed. [ 49.497821] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 49.571437] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.571441] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.580105] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.593332] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 49.602500] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.611089] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 49.720133] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 53.346840] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4862) [ 53.346845] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.356463] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4862) [ 53.495386] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 53.522178] systemd[1]: Detected architecture x86-64. [ 53.527668] systemd[1]: Set hostname to <SA6400>. [ 55.691746] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 55.745024] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 55.759345] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 55.774547] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. [ 55.787073] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 55.805231] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-fixed-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory. [ 55.822149] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 55.941782] zram: Added device: zram0 [ 55.950711] zram: Added device: zram1 [ 55.951112] systemd-journald[6879]: Received request to flush runtime journal from PID 1 [ 55.962014] zram: Added device: zram2 [ 55.975264] zram: Added device: zram3 [ 55.975518] cryptd: max_cpu_qlen set to 1000 [ 56.009856] AVX2 version of gcm_enc/dec engaged. [ 56.015597] AES CTR mode by8 optimization enabled [ 56.064282] md: md1 stopped. [ 56.071298] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 56.084383] md/raid1:md1: active with 1 out of 4 mirrors [ 56.095911] NET: Registered protocol family 10 [ 56.102151] Segment Routing with IPv6 [ 56.102297] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 56.106474] md1: detected capacity change from 0 to 2147418112 [ 56.136840] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 56.188835] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 56.195260] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 56.224576] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 56.231733] Copyright(c) 2007 - 2020 Intel Corporation. [ 56.262695] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 56.270434] Copyright(c) 1999 - 2020 Intel Corporation. [ 56.283148] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 56.297401] zram0: detected capacity change from 0 to 2468347904 [ 56.318106] Adding 2410492k swap on /dev/zram0. Priority:1 extents:1 across:2410492k SS [ 56.330790] zram1: detected capacity change from 0 to 2468347904 [ 56.354163] Adding 2410492k swap on /dev/zram1. Priority:1 extents:1 across:2410492k SS [ 56.366819] zram2: detected capacity change from 0 to 2468347904 [ 56.405165] Adding 2410492k swap on /dev/zram2. Priority:1 extents:1 across:2410492k SS [ 56.416844] zram3: detected capacity change from 0 to 2468347904 [ 56.479964] qed_init called [ 56.483764] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 56.490725] creating debugfs root node [ 56.508692] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 56.518129] Adding 2410492k swap on /dev/zram3. Priority:1 extents:1 across:2410492k SS [ 56.570840] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 56.581469] creating debugfs root node [ 56.740029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 56.748574] ehci-pci: EHCI PCI platform driver [ 56.753350] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 56.758656] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 56.766114] ehci-pci 0000:00:1a.0: debug port 2 [ 56.774635] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 56.781536] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 56.795090] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 56.801347] hub 3-0:1.0: USB hub found [ 56.805199] hub 3-0:1.0: 2 ports detected [ 56.809991] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 56.815296] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 56.822820] ehci-pci 0000:00:1d.0: debug port 2 [ 56.831306] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 56.838209] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000 [ 56.850090] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 56.856347] hub 4-0:1.0: USB hub found [ 56.860164] hub 4-0:1.0: 2 ports detected [ 56.867917] uhci_hcd: USB Universal Host Controller Interface driver [ 56.919905] synobios open /dev/ttyS1 success [ 56.925683] Fail to get disk 1 led type [ 56.930962] Fail to get disk 2 led type [ 56.930964] Fail to get disk 3 led type [ 56.930971] Fail to get disk 4 led type [ 56.946798] Fail to get disk 5 led type [ 56.952096] Fail to get disk 6 led type [ 56.957375] Fail to get disk 7 led type [ 56.962620] Fail to get disk 8 led type [ 56.962622] Fail to get disk 9 led type [ 56.962624] Fail to get disk 10 led type [ 56.962630] Fail to get disk 11 led type [ 56.981062] Fail to get disk 12 led type [ 56.985110] 2023-11-22 15:25:3 UTC [ 56.989861] synobios: load, major number 201 [ 56.995575] Brand: Synology [ 56.999783] Model: SA-6400 [ 56.999793] synobios cpu_arch proc entry initialized [ 57.008936] synobios crypto_hw proc entry initialized [ 57.014053] synobios syno_platform proc entry initialized [ 57.095088] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 57.117095] usb-storage 2-5:1.0: USB Mass Storage device detected [ 57.123596] scsi host6: usb-storage 2-5:1.0 [ 57.128026] usbcore: registered new interface driver usb-storage [ 57.135093] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 57.145762] usbcore: registered new interface driver uas [ 57.254449] Got empty serial number. Generate serial number from product. [ 57.262186] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.581794] hub 3-1:1.0: USB hub found [ 57.585728] hub 3-1:1.0: 6 ports detected [ 57.589800] Got empty serial number. Generate serial number from product. [ 57.597484] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 57.607718] drivers/usb/core/hub.c (2992) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1 [ 57.618270] hub 4-1:1.0: USB hub found [ 57.622201] hub 4-1:1.0: 8 ports detected [ 57.908805] Module [adt7475] is removed. [ 57.919183] Module [hwmon_vid] is removed. [ 58.137477] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 58.146654] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 58.147084] sd 6:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 58.161159] sd 6:0:0:0: [synoboot] Write Protect is off [ 58.166454] sd 6:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 58.172459] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 58.196004] synoboot: synoboot1 synoboot2 synoboot3 [ 58.203013] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 59.934465] alx 0000:02:00.0 eth1: NIC Up: 1 Gbps Full [ 59.939924] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 59.972117] Module [adt7475] is removed. [ 60.063404] Module [hwmon_vid] is removed. [ 60.473001] ext2: synoboot2 mounted, process=synoencvolume [ 60.481681] ext4: synoboot2 mounted, process=synoencvolume [ 60.512786] vfat: synoboot2 mounted, process=synoencvolume [ 60.548190] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 60.560842] synoboot2 unmounted, process=synoencvolume [ 61.171320] 8021q: 802.1Q VLAN Support v1.8 [ 61.454819] md: md2 stopped. [ 61.484101] md/raid1:md2: active with 1 out of 1 mirrors [ 61.492390] md2: detected capacity change from 0 to 21030961152 [ 62.143204] Module [adt7475] is removed. [ 62.159280] Module [hwmon_vid] is removed. [ 65.645110] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 66.785068] raid6: avx2x4 gen() 7478 MB/s [ 66.806065] raid6: avx2x4 xor() 3991 MB/s [ 66.827066] raid6: avx2x2 gen() 7145 MB/s [ 66.848065] raid6: avx2x2 xor() 4395 MB/s [ 66.869067] raid6: avx2x1 gen() 6675 MB/s [ 66.890064] raid6: avx2x1 xor() 4048 MB/s [ 66.911069] raid6: sse2x4 gen() 3865 MB/s [ 66.932068] raid6: sse2x4 xor() 2426 MB/s [ 66.953066] raid6: sse2x2 gen() 4092 MB/s [ 66.974065] raid6: sse2x2 xor() 2447 MB/s [ 66.995068] raid6: sse2x1 gen() 3309 MB/s [ 67.016067] raid6: sse2x1 xor() 2173 MB/s [ 67.020398] raid6: using algorithm avx2x4 gen() 7478 MB/s [ 67.025863] raid6: .... xor() 3991 MB/s, rmw enabled [ 67.030874] raid6: using avx2x2 recovery algorithm [ 67.037807] xor: automatically using best checksumming function avx [ 67.166592] Btrfs loaded, crc32c=crc32c-intel [ 68.350853] BTRFS: device label 2023.11.21-13:13:28 v69057 devid 1 transid 63 /dev/mapper/cachedev_0 scanned by mount (10695) [ 68.362892] BTRFS info (device dm-2): enabling auto syno reclaim space [ 68.369524] BTRFS info (device dm-2): enabling ssd optimizations [ 68.375612] BTRFS info (device dm-2): using free space tree [ 68.381264] BTRFS info (device dm-2): using block group cache tree [ 68.387548] BTRFS info (device dm-2): has skinny extents [ 68.398427] BTRFS info (device dm-2): root of syno feature tree is null [ 71.582720] Synotify use 16384 event queue size [ 71.587781] Synotify use 16384 event queue size [ 72.087538] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 72.732471] ata1.00: configured for UDMA/100 [ 72.736798] ata1 : EH complete [ 72.739896] Invalid parameter [ 72.903216] ext2: synoboot2 mounted, process=synopkicompatsy [ 72.915727] ext4: synoboot2 mounted, process=synopkicompatsy [ 72.922754] vfat: synoboot2 mounted, process=synopkicompatsy [ 72.959588] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 72.975144] synoboot2 unmounted, process=synopkicompatsy [ 74.288639] ata2.00: configured for UDMA/100 [ 74.292985] ata2 : EH complete [ 74.296071] Invalid parameter [ 87.493354] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(213ba3a11353). [ 88.568726] syno_extent_pool: module license 'Proprietary' taints kernel. [ 88.583112] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 88.657758] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 88.669862] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 88.679873] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 89.873980] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 89.882341] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 89.890200] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 89.899348] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 89.907738] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 89.915752] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 90.861827] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 91.442369] The mempool could be used by other devices [ 91.828782] ext2: synoboot1 mounted, process=syno_bios_log_c [ 91.859900] ext4: synoboot1 mounted, process=syno_bios_log_c [ 91.907407] vfat: synoboot1 mounted, process=syno_bios_log_c [ 91.991823] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 92.045526] synoboot1 unmounted, process=syno_bios_log_c [ 93.057033] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 98.575998] fuse: init (API version 7.32) Haswell, which is an old device, is said to be impossible to debug, but I am uploading the results of dmesg -w for reference. I tested it with the last test build you shared.

I would start with the RAM upgrade. Then use a new USB stick for the new loader and use the last known working settings from your 3615 loader (Sataportmap etc) and create a new loader. Also can you PM me the output of the command dmidecode ?

Hi there! Iam setting up a Xpenology NAS and have trouble with the satamap command. First my Hardware: i3-12100 Biostar B660GTN (ITX board with 4 Sata Ports) 3x Crucial MX500 1TB SSDs 16GB RAM I used THIS guide to install DSM7 but have some trouble with the satamap command. It looks like this: Found "00:17.0 Intel Corporation Device 7ae2 (rev 11)" Detected 8 ports/3 drives. Bad ports: 1 2 3 4. Override # of ports or ENTER to accept <8> Computed settings: SataPortMap=8 DiskIdxMap=00 WARNING: Bad ports are mapped. The DSM installation will fail! I searched and found THIS post. So i tryed the "dmesg |grep sd" command and got my 3 SSDs and my USB stick: [ 0.690617] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.690731] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.690839] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.722473] sd 8:0:0:0: [sdd] 242614272 512-byte logical blocks: (124 GB/116 GiB) So i tryed to put in: SataPortMap=41 (4= 4 Sata Ports - 1 = one USB stick) DiskIdxMap=48 (4 because the first ssd is 4:0:0:0 - 8 because the usb stick is 8:0:0:0 But when i build the bootloader and restart the system i get some error (no drives found or something like that). Is my understanding of the satamap command wrong? What kind of settings should i use? Pls help Thanks!

I'm sorry. I tried to translate all of Excel's Korean language, but some parts were missing. The contents are as follows. 디스크 일련번호 ( Disk sequence ) 디스크 이름 ( Disk Name) 유형 ( type ) I think maxdisks just needs to be kept above 22. I have not yet been able to compile the information explained by many people and turn it into my own knowledge. I am only following the explanation of wjz304, who has the most knowledge. I'd like to believe that's the way to prevent confusion. The file in charge of adjustment in Redpil is user_config.json. Corresponds to the ITEM of the extra_cmdline element. When SataPortMap / DiskIdxMap / SasIdxMap is recorded, this information is passed to synoinfo.conf Corresponds to ITEM of another element, synoinfo I understand that when maxdisks / internalportcfg / esataportcfg / usbportcfg are recorded, this information is also passed to synoinfo.conf. As for internalportcfg / esataportcfg / usbportcfg, I am still in a position to check it, so I am not sure if it is accurately transmitted to synoinfo.conf.

I discovered with 16 disks my esataportcfg and internalportcfg values were overlapping when converted to binary. I decided to edit the setup for 20 total drives with 20 internal ports in case I swap out my 9211-8i for a 9300-16i (would that just work by the way?) as I have assumed the esata ports mentioned here are in fact my onboard SATA controller ports? I'm not sure how to manage the SATA disk side of things though and forgotten where to do that sataportmap and diskid tinkering.

Oh, sorry for my misunderstanding, you need to set DiskIdxMap and SataPortMap

1. As for the VGA resolution compatibility issue, I understand that ARPL already has a menu prepared. I hadn't thought about it since no users had requested it so far. I will prepare the same menu for TCRP as for ARPL. 2. EFI and legacy issues must be handled separately from Boot and Storage. Perhaps the EFI needed to boot the loader can be pointed to UEFI USB partition 1 in the BIOS. You can choose whichever works well among Legacy/EFI. For storage, legacy mode is recommended, especially for HBA. This is something I also heard from other experts. They said that legacy mode passes through the SAS controller's own BIOS check section, giving it time to accurately recognize the disk. 3. If you are trying to utilize both the HBA and SATA controller ports, it will be difficult for me to give you an accurate guide. This is the setting value when using multiple disks in the HBA recommended by @flyride [HBA Recommended settings from flyride] Not EUDEV , Use Only DDSML (If you use TCRP-mshell ) "SataPortMap": "12", "DiskIdxMap": "1000", "SasIdxMap: "0" "MaxDisks: "24" Sata controllers will not be considered. Once these recommended settings are maintained, a guide pop-up is provided in MSHELL that you can refer to to adjust SataPortMap / DiskIdxMap for the Sata controller. This function is also taken from ARPL. If you use x "Show Sata(s) # ports and drives" in the main menu, you can see the guide pop-up as shown below. You must learn how to decipher and utilize this content. It's been a while since I learned how to decipher this too. I think it would be good to look at this map and learn more together. If possible, I will try to configure an environment similar to your situation by combining HBA / SATA.

In the VM, it is forced not to set any values to SataPortMap and DiskIdxMap, which is recommended by TTG. If there is no value, it dynamically searches for the SATA PORT setting. Unless there is a special reason, the default setting to increase the success rate for beginners is to leave these two values blank. If you absolutely need to modify it, you should use "e" as you discovered.