ladinek

Tried tonight, worked like a breeze. Thanks for quick reaction and solution.

I am trying to build TCRP loader, prepared everything, trying DS3622xs+ platform. I already had working system on this hardware by "traditional" pocopico method, however it was necessary to use 9.4.9 version, version 10 did not finish due to some error. But then I played with m-shell version and I liked it - it support newer version of the DSM. Now I cleaned all disks (2x2TB onboard SATA, 6x4TB on LSI 2308 (1000:0087). Xeon E3-1230v3, 32GB RAM, 2x onboard Ethernet (server board Intel S1200RP. Building the loader, I get in certain phase following error: [#] Verifying /home/tc/redpill-load/custom/extensions/ddsml/broadwellnk_44302/modules.alias.3.json.tgz file... [ERR] [!] Checksum mismatch - expected c70ada1247849d67bbb4face71e456c074f73511c0c3bae09ee1f479ffbeafa4 but computed ed263ba26e53869597b682a9fa9703a26b872e40e32658a8aae0d33e9772f389 *** Process will exit *** [!] Failed to update all extensions for ds3622xsp_69057 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors An error occurred while building the loader!!! Clean the redpill-load directory!!! Clearing local redpill files I tried different USB dongles, different versions of the DS3622xs+ platorm, re-downloaded the file, always same result.

I have server board Intel S1200V3RP with Xeon E3-1230v3, 32GB RAM, controller LSI SAS 2008 (1000:0072, subsystem [1734:1177] which is Fujitsu, flashed to IT. I was unable to finish the 10.0 TCRP process, but with 9.4.9c WITHOUT update/fullupgrade - just serialgen, identifyusb and realmac, I was able to build DS3622xs+ version 7.1.1-42962 update 1. I have one drive on SATA port and some drives on HBA. The SataPortMap was properly detected as 58, as the board has 5 onboard SATA ports and the HBA is 8-channel. Everything works fine, until power off. On cold start, BIOS sees all drives as well as those on the HBA, however after boot, only the drive on the onboard SATA is visible. Listing PCI, the device is seen, but no kernel driver associated. 0000:00:1f.3 Class [0c05]: Device [8086:8c22] (rev 05) Subsystem: Device [8086:35b5] Kernel driver in use: i801_smbus 0000:00:1f.6 Class [1180]: Device [8086:8c24] (rev 05) Subsystem: Device [8086:35b5] 0000:02:00.0 Class [0104]: Device [1000:0072] (rev 03) Subsystem: Device [1734:1177] ******* Kernel driver in use: mpt3sas 0000:03:00.0 Class [0300]: Device [102b:0522] (rev 05) DeviceName: ServerEngines Pilot III Subsystem: Device [8086:0103] The asterisked line is missing. However, lsmod shows mpt3sas module. After warm reboot, the mpt3sas driver gets loaded and disks are visible. Minor consequences are that controllers order probably changes due to missing driver, because drives enumeration changes and the SataPortMap is therefore wrong. But this is not the issue for now, I just need fix the stability of the boot process before I will proceed with loading some valuable data. I tried even patch DSM to update 6, which was success without any touching of the loader, but behavior is the same. Any idea?