dodo-dk

Same problem here in Proxmox after some Docker starts and stops. I have deactivated the IPv6 Support in the DSM Network Settings (not in Docker Settings) and it seams to be stable at the moment.

Hi, i found the problem. You need to change the CPU Settings from kvm64 to host or haswell. So it works with my E3-1241 V3 CPU - Bromolow - 7.0.1-42214 setup.

I have the same problem with DSM 7.0.1 RC -> Bug CPU, see log. With 6.2.x it works. [ 260.026023] BUG: soft lockup - CPU#0 stuck for 41s! [synofoto-face-e:12009] [ 260.026023] Modules linked in: fuse 8021q vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) udf isofs loop synoacl_vfs(PO) btrfs zstd_decompress ecryptfs zstd_compress xxhash xor raid6_pq zram(C) glue_helper lrw gf128mul ablk_helper bromolow_synobios(PO) hid_generic usbhid hid usblp bnx2x(O) mdio mlx5_core(O) mlx4_en(O) mlx4_core(O) mlx_compat(O) qede(O) qed(O) atlantic_v2(O) atlantic(O) tn40xx(O) i40e(O) ixgbe(O) be2net(O) i2c_algo_bit igb(O) dca e1000e(O) sg dm_snapshot crc_itu_t crc_ccitt psnap p8022 llc zlib_deflate libcrc32c hfsplus md4 hmac sit tunnel4 ipv6 flashcache_syno(O) flashcache(O) syno_flashcache_control(O) dm_mod cryptd arc4 sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance mperf processor thermal_sys cpufreq_stats freq_table vxlan ip_tunnel virtio_scsi(OF) virtio_net(OF) virtio_blk(OF) virtio_pci(OF) virtio_ring(OF) virtio(OF) etxhci_hcd usb_storage xhci_hcd uhci_hcd ehci_pci ehci_hcd usbcore usb_common redpill(OF) [last unloaded: bromolow_synobios] [ 260.026023] CPU: 0 PID: 12009 Comm: synofoto-face-e Tainted: PF C O 3.10.108 #42214 [ 260.026023] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 260.026023] task: ffff880048620040 ti: ffff880051fcc000 task.ti: ffff880051fcc000 [ 260.026023] RIP: 0010:[<ffffffff81090492>] [<ffffffff81090492>] smp_call_function_many+0x262/0x290 [ 260.026023] RSP: 0000:ffff880051fcfc68 EFLAGS: 00000202 [ 260.026023] RAX: ffff88007dd15cc8 RBX: 0000000000000000 RCX: 0000000000000002 [ 260.026023] RDX: ffff88007dd15cc8 RSI: 0000000000000008 RDI: 00000000000000ff [ 260.026023] RBP: ffff88007dd95cc8 R08: ffff88007dc139c8 R09: 0000000000000020 [ 260.026023] R10: 0000000000004f5c R11: 0000000000000000 R12: 0000000000000000 [ 260.026023] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff81893940 [ 260.026023] FS: 00007f6a7dffb700(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 [ 260.026023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 260.026023] CR2: 00007f6a22001048 CR3: 00000000486c0000 CR4: 00000000000006f0 [ 260.026023] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 260.026023] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 260.026023] Stack: [ 260.026023] ffff88007dc139c8 ffff88007dd93980 0000000181893940 0000000000013980 [ 260.026023] ffff88007a0c0400 ffff880051fcfcf8 ffff88007a0c06d8 00007f6a22001048 [ 260.026023] ffffea0000f97bc0 ffff88004747e008 ffffffff81030372 ffff88007a0c0400 [ 260.026023] Call Trace: [ 260.026023] [<ffffffff81030372>] ? flush_tlb_page+0x72/0x130 [ 260.026023] [<ffffffff81117572>] ? ptep_clear_flush+0x22/0x30 [ 260.026023] [<ffffffff81106a0d>] ? do_wp_page+0x2ad/0x8c0 [ 260.026023] [<ffffffff81107e6d>] ? handle_pte_fault+0x38d/0x9e0 [ 260.026023] [<ffffffff81108775>] ? handle_mm_fault+0x135/0x2e0 [ 260.026023] [<ffffffff814aba0a>] ? __do_page_fault+0x14a/0x500 [ 260.026023] [<ffffffff8128e94c>] ? rwsem_wake+0x3c/0x50 [ 260.026023] [<ffffffff81294ee7>] ? call_rwsem_wake+0x17/0x30 [ 260.026023] [<ffffffff814aff11>] ? system_call_after_swapgs+0xae/0x13f [ 260.026023] [<ffffffff814a8883>] ? error_swapgs+0xa4/0xba [ 260.026023] [<ffffffff814a8877>] ? error_swapgs+0x98/0xba [ 260.026023] [<ffffffff814a8883>] ? error_swapgs+0xa4/0xba [ 260.026023] [<ffffffff814a8877>] ? error_swapgs+0x98/0xba [ 260.026023] [<ffffffff814a8883>] ? error_swapgs+0xa4/0xba [ 260.026023] [<ffffffff814a8877>] ? error_swapgs+0x98/0xba [ 260.026023] [<ffffffff814a8883>] ? error_swapgs+0xa4/0xba [ 260.026023] [<ffffffff814a8877>] ? error_swapgs+0x98/0xba [ 260.026023] [<ffffffff814a8883>] ? error_swapgs+0xa4/0xba [ 260.026023] [<ffffffff814a8592>] ? page_fault+0x22/0x30 [ 260.026023] Code: 8d 81 00 89 c1 0f 8e 1e fe ff ff 48 98 48 8b 13 48 03 14 c5 e0 8d 8a 81 f6 42 20 01 48 89 d0 74 c8 0f 1f 84 00 00 00 00 00 f3 90 <f6> 40 20 01 75 f8 eb b6 66 0f 1f 44 00 00 48 89 ea 4c 89 fe 44

Proxmox with Q35 needs mapping. With i440fx not.

@loomes Thank you for sharing. I have get the patching working too after hours of testing.

@loomes thanks for the info that is working. I was unsuccessful to manual patch it, don't know what I'm doing wrong.

@jumkey I´m not a Windows User but thank you for your work. How to generate the bsp file? I have changed the config.json and changed to the "NEW" init patch. IMG Build works but with old BSP (41222) it reboots when it wants to load the Kernel. DS3615 7.0.1-42214

@haydibe thank you very much, now it works with q35.

Hi, thanks for all your work @ThorGroup @haydibe and all @others. I have updated the loader and all works good with i440fx in Proxmox (DS3615xs). I have read the q35 is better than i440fx. So I switch to q35 but with that, the boot takes longer and my Volume2 is crashed. I doesn't found all Harddrives. I have one Virtual and 5 Passtrough Disks. I have switched back to i440fx and all works, thanks god, Volume2 is back. Do I need mapping or something with the q35 settings? Here some Pictures and Log-Cuts: Thanks for your help.

Hi, with the GIT-changes from today, the builded IMG dosn´t work anymore. (DS3615xs_6.2.4-25556 on Proxmox 7 with same Settings as before). Builded with Linux sources. Edit: Works now with the new changes, Thanks.

@cwiggs It works, something you do wrong. VM_ID have you changed in the line? This is my args line in Proxmox 7: args: -device 'qemu-xhci,addr=0x18' -drive 'id=synoboot,file=/var/lib/vz/images/100/redpill-DS3615xs_6.2.4-25556_b1628330868.img,if=none,format=raw' -device 'usb-storage,id=synoboot,drive=synoboot,bootindex=5'

In Proxmox use Virtio Nic (or E1000E)

no, its disabled

Have you deinstalled it before install and reboot Xpenology, and Power Button is running? I have 6.2.2-24922 Update 4 too and it works.

This works:

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun v1.03b - DS3615 - Using custom extra.lzma: NO - Installation type: VM - Proxmox 5.3-12 - Additional comments: Changed LAN from e1000 to e1000e

sorry, my english is not so good to describe good. You need to add the network card in the bootargs, not in the proxmox webif. You need the output from your ID with qm showcmd Your-VM-ID. Than you need to extract the lines with the network card and add it to the bootargs in the Your-VM-ID.conf without the scripts. And you need to change the e1000 to e1000e in the lines. If you send me your output, I can help you: qm showcmd YOUR-VM-ID and qm config YOUR-VM-ID

DSM6.2.1-23824 Update 6 works with proxmox - e1000e driver and 1.03b loader

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: Jun v1.03b - DS3615 - Using custom extra.lzma: NO - Installation type: VM - Proxmox 5.3-11 - Additional comments: Changed LAN from e1000 to e1000e

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 2 - Loader version and model: Jun v1.03b - DS3615 - Using custom extra.lzma: NO - Installation type: VM - Proxmox 5.3-6 - Additional comments: Changed LAN from e1000 to e1000e

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23824 Update 1 - Loader version and model: Jun v1.03b - DS3615 - Using custom extra.lzma: NO - Installation type: VM - Proxmox 5.3-5 - Additional comments: Changed LAN from e1000 to e1000e

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2, Jun v1.03b - DS3615 - Loader version and model: Jun v1.03b - DS3615 - Using custom extra.lzma: NO - Installation type: VM - Proxmox 5.2-12 - Additional comments: Changed LAN from e1000 to e1000e

You have the xpenology as USB device. This don't work with 1.04b. You need it as sata0. Read this, this is the solution for you:

For the SCSI Problem I have found a solution for the SCSI problem with more than one disk. Here is the source/solution. You need to edit the file /usr/share/perl5/PVE/QemuServer.pm Change this if (!$conf->{scsihw} || ($conf->{scsihw} =~ m/^lsi/)){ $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,scsi-id=$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}"; } else { $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,channel=0,scsi-id=0,lun=$drive->{index},drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}"; } to this if (!$conf->{scsihw} || ($conf->{scsihw} =~ m/^lsi/)){ $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,scsi-id=$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}"; } else { $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,channel=0,scsi-id=$drive->{index},lun=0,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}"; } and restart service with systemctl restart pvedaemon.service Thanks you very much Mario! For Loader 1.04b with Proxmox, it works. This is my Test-Config: balloon: 0 bios: seabios boot: c bootdisk: sata0 cores: 4 cpu: kvm64 hotplug: 0 memory: 2048 name: DSM6.2 net0: e1000=36:CE:FF:A5:7B:3D,bridge=vmbr0 numa: 0 ostype: l26 sata0: local:105/synoboot-ds918p_1.04b.raw,size=52429K sata1: local-lvm:vm-105-disk-1,size=32G scsi0: local-lvm:vm-105-disk-0,size=42G scsi1: local-lvm:vm-105-disk-2,size=52G scsihw: megasas serial0: socket smbios1: uuid=29b25045-0fd0-4c22-a163-41b36e09d32a sockets: 1

I have the same problem with scsi. :: Loading module megaraid ... [ OK ] :: Loading module megaraid_sas[ 3.259638] megaraid_sas 0000:00:05.0: INIT adapter done [ 3.308585] sd 6:2:0:0: Unexpected response from lun 1 while scanning, scan aborted ... [ OK ] i don’t have a solution.